]> err.no Git - linux-2.6/commitdiff
USB: OHCI: host-controller resumes leave root hub suspended
authorAlan Stern <stern@rowland.harvard.edu>
Thu, 3 Apr 2008 22:03:17 +0000 (18:03 -0400)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 25 Apr 2008 04:16:48 +0000 (21:16 -0700)
Drivers in the ohci-hcd family should perform certain tasks whenever
their controller device is resumed.  These include checking for loss
of power during suspend, turning on port power, and enabling interrupt
requests.

Until now these jobs have been carried out when the root hub is
resumed, not when the controller is.  Many drivers work around the
resulting awkwardness by automatically resuming their root hub
whenever the controller is resumed.  But this is wasteful and
unnecessary.

To simplify the situation, this patch (as1066) adds a new core
routine, ohci_finish_controller_resume(), which can be used by all the
OHCI-variant drivers.  They can call the new routine instead of
resuming their root hubs.  And ohci-pci.c can call it instead of using
its own special-purpose handler.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ohci-at91.c
drivers/usb/host/ohci-ep93xx.c
drivers/usb/host/ohci-hub.c
drivers/usb/host/ohci-omap.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/ohci-pxa27x.c
drivers/usb/host/ohci-sm501.c
drivers/usb/host/ohci-ssb.c

index d72dc07dda017de12a51eaedc68b9c0626d26cb3..e534f9de0f05f9bbfc20c4f9938cb29c66a31f7a 100644 (file)
@@ -348,6 +348,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
        if (!clocked)
                at91_start_clock();
 
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 #else
index 40c683f8987de0548f9239fd623d9a036bf2fe64..5adaf36e47d05627dd1d9a884895ceaa28608aef 100644 (file)
@@ -192,8 +192,8 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
        ohci->next_statechange = jiffies;
 
        ep93xx_start_hc(&pdev->dev);
-       usb_hcd_resume_root_hub(hcd);
 
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 #endif
index c638e6b33c43f532cc88e9599a8e01344ba6da47..28d6d775eb5f15726889c142a666154126d17a9c 100644 (file)
@@ -326,6 +326,49 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
        return rc;
 }
 
+/* Carry out the final steps of resuming the controller device */
+static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+{
+       struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
+       int                     port;
+       bool                    need_reinit = false;
+
+       /* See if the controller is already running or has been reset */
+       ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+       if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+               need_reinit = true;
+       } else {
+               switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+               case OHCI_USB_OPER:
+               case OHCI_USB_RESET:
+                       need_reinit = true;
+               }
+       }
+
+       /* If needed, reinitialize and suspend the root hub */
+       if (need_reinit) {
+               spin_lock_irq(&ohci->lock);
+               hcd->state = HC_STATE_RESUMING;
+               ohci_rh_resume(ohci);
+               hcd->state = HC_STATE_QUIESCING;
+               ohci_rh_suspend(ohci, 0);
+               hcd->state = HC_STATE_SUSPENDED;
+               spin_unlock_irq(&ohci->lock);
+       }
+
+       /* Normally just turn on port power and enable interrupts */
+       else {
+               ohci_dbg(ohci, "powerup ports\n");
+               for (port = 0; port < ohci->num_ports; port++)
+                       ohci_writel(ohci, RH_PS_PPS,
+                                       &ohci->regs->roothub.portstatus[port]);
+
+               ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+               ohci_readl(ohci, &ohci->regs->intrenable);
+               msleep(20);
+       }
+}
+
 /* Carry out polling-, autostop-, and autoresume-related state changes */
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
                int any_connected)
index 2aafa7b6c81fa2292af6cbad5f113eb3f33efac3..3a7c24c03671199680a435cd93370b415bcfa52c 100644 (file)
@@ -510,14 +510,15 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
 
 static int ohci_omap_resume(struct platform_device *dev)
 {
-       struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(dev));
+       struct usb_hcd  *hcd = platform_get_drvdata(dev);
+       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
        if (time_before(jiffies, ohci->next_statechange))
                msleep(5);
        ohci->next_statechange = jiffies;
 
        omap_ohci_clock_power(1);
-       usb_hcd_resume_root_hub(platform_get_drvdata(dev));
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 
index 40b62a35fd3c66fc2e27d0a3921989ccfed71738..4696cc912e16203540a5185568a27e02bb7c15e2 100644 (file)
@@ -238,42 +238,6 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
        return ret;
 }
 
-#if    defined(CONFIG_USB_PERSIST) && (defined(CONFIG_USB_EHCI_HCD) || \
-               defined(CONFIG_USB_EHCI_HCD_MODULE))
-
-/* Following a power loss, we must prepare to regain control of the ports
- * we used to own.  This means turning on the port power before ehci-hcd
- * tries to switch ownership.
- *
- * This isn't a 100% perfect solution.  On most systems the OHCI controllers
- * lie at lower PCI addresses than the EHCI controller, so they will be
- * discovered (and hence resumed) first.  But there is no guarantee things
- * will always work this way.  If the EHCI controller is resumed first and
- * the OHCI ports are unpowered, then the handover will fail.
- */
-static void prepare_for_handover(struct usb_hcd *hcd)
-{
-       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-       int             port;
-
-       /* Here we "know" root ports should always stay powered */
-       ohci_dbg(ohci, "powerup ports\n");
-       for (port = 0; port < ohci->num_ports; port++)
-               ohci_writel(ohci, RH_PS_PPS,
-                               &ohci->regs->roothub.portstatus[port]);
-
-       /* Flush those writes */
-       ohci_readl(ohci, &ohci->regs->control);
-       msleep(20);
-}
-
-#else
-
-static inline void prepare_for_handover(struct usb_hcd *hcd)
-{ }
-
-#endif /* CONFIG_USB_PERSIST etc. */
-
 #ifdef CONFIG_PM
 
 static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
@@ -312,13 +276,8 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 
 static int ohci_pci_resume (struct usb_hcd *hcd)
 {
-       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-       /* FIXME: we should try to detect loss of VBUS power here */
-       prepare_for_handover(hcd);
-       ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 
index 5d470263eed85e75837cb5623f5428b84404b75b..d4ee27d92be8fd69874f50b1e16785257a1066c1 100644 (file)
@@ -356,8 +356,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
        if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
                return status;
 
-       usb_hcd_resume_root_hub(hcd);
-
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 #endif
index 54b6ac2e3e4aa6ddd210ecef1f89fb11427a25a3..4a11e181601778d13abc58e8694efe3f225be8b4 100644 (file)
@@ -231,14 +231,15 @@ static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
 static int ohci_sm501_resume(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
-       struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(pdev));
+       struct usb_hcd  *hcd = platform_get_drvdata(pdev);
+       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
        if (time_before(jiffies, ohci->next_statechange))
                msleep(5);
        ohci->next_statechange = jiffies;
 
        sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
-       usb_hcd_resume_root_hub(platform_get_drvdata(pdev));
+       ohci_finish_controller_resume(hcd);
        return 0;
 }
 #else
index 7879f2fdad8447eee13dca5ffd50e1499ca4efa8..7275186db31556baf8278ec300da9d0d8600a98f 100644 (file)
@@ -189,6 +189,7 @@ static int ssb_ohci_resume(struct ssb_device *dev)
 
        ssb_device_enable(dev, ohcidev->enable_flags);
 
+       ohci_finish_controller_resume(hcd);
        return 0;
 }