b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
}
-/* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
-{
- if (dev->phy.rev >= 3) {
- if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
- & B43_MMIO_RADIO_HWENABLED_HI_MASK))
- return 1;
- } else {
- if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
- & B43_MMIO_RADIO_HWENABLED_LO_MASK)
- return 1;
- }
- return 0;
-}
-
/* This is the opposite of b43_chip_init() */
static void b43_chip_exit(struct b43_wldev *dev)
{
//TODO for APHY (temperature?)
}
-static void b43_periodic_every1sec(struct b43_wldev *dev)
-{
- bool radio_hw_enable;
-
- /* check if radio hardware enabled status changed */
- radio_hw_enable = b43_is_hw_radio_enabled(dev);
- if (unlikely(dev->radio_hw_enable != radio_hw_enable)) {
- dev->radio_hw_enable = radio_hw_enable;
- b43_rfkill_toggled(dev, radio_hw_enable);
- }
-}
-
static void do_periodic_work(struct b43_wldev *dev)
{
unsigned int state;
state = dev->periodic_state;
- if (state % 120 == 0)
+ if (state % 8 == 0)
b43_periodic_every120sec(dev);
- if (state % 60 == 0)
+ if (state % 4 == 0)
b43_periodic_every60sec(dev);
- if (state % 30 == 0)
+ if (state % 2 == 0)
b43_periodic_every30sec(dev);
- if (state % 15 == 0)
- b43_periodic_every15sec(dev);
- b43_periodic_every1sec(dev);
+ b43_periodic_every15sec(dev);
}
/* Estimate a "Badness" value based on the periodic work
{
int badness = 0;
- if (state % 120 == 0) /* every 120 sec */
+ if (state % 8 == 0) /* every 120 sec */
badness += 10;
- if (state % 60 == 0) /* every 60 sec */
+ if (state % 4 == 0) /* every 60 sec */
badness += 5;
- if (state % 30 == 0) /* every 30 sec */
- badness += 1;
- if (state % 15 == 0) /* every 15 sec */
+ if (state % 2 == 0) /* every 30 sec */
badness += 1;
#define BADNESS_LIMIT 4
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
dev->periodic_state++;
- out_requeue:
+out_requeue:
if (b43_debug(dev, B43_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
- delay = round_jiffies(HZ);
+ delay = round_jiffies(HZ * 15);
queue_delayed_work(dev->wl->hw->workqueue, &dev->periodic_work, delay);
- out:
+out:
mutex_unlock(&dev->wl->mutex);
}
static void b43_wireless_core_detach(struct b43_wldev *dev)
{
+ b43_rfkill_free(dev);
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43_release_firmware(dev);
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43_chip_reset);
+ b43_rfkill_alloc(dev);
b43_radio_turn_off(dev, 1);
b43_switch_analog(dev, 0);
#include "b43.h"
-static void b43_notify_rfkill_press(struct work_struct *work)
+/* Returns TRUE, if the radio is enabled in hardware. */
+static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
{
- struct b43_rfkill *rfk = container_of(work, struct b43_rfkill,
- notify_work);
- struct b43_wl *wl = container_of(rfk, struct b43_wl, rfkill);
- struct b43_wldev *dev;
- enum rfkill_state state;
-
- mutex_lock(&wl->mutex);
- dev = wl->current_dev;
- if (b43_status(dev) < B43_STAT_INITIALIZED) {
- mutex_unlock(&wl->mutex);
- return;
- }
- if (dev->radio_hw_enable)
- state = RFKILL_STATE_ON;
- else
- state = RFKILL_STATE_OFF;
- b43info(wl, "Radio hardware status changed to %s\n",
- dev->radio_hw_enable ? "ENABLED" : "DISABLED");
- mutex_unlock(&wl->mutex);
-
- if (rfk->rfkill) {
- /* Be careful. This calls back into the software toggle routines.
- * So we must unlock before calling. */
- rfkill_switch_all(rfk->rfkill->type, state);
+ if (dev->phy.rev >= 3) {
+ if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
+ & B43_MMIO_RADIO_HWENABLED_HI_MASK))
+ return 1;
+ } else {
+ if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
+ & B43_MMIO_RADIO_HWENABLED_LO_MASK)
+ return 1;
}
+ return 0;
}
-/* Called when the RFKILL toggled in hardware.
- * This is called with the mutex locked. */
-void b43_rfkill_toggled(struct b43_wldev *dev, bool on)
+/* The poll callback for the hardware button. */
+static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
+ struct b43_wldev *dev = poll_dev->private;
struct b43_wl *wl = dev->wl;
+ bool enabled;
+ mutex_lock(&wl->mutex);
B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
- /* Update the RF status asynchronously, as rfkill will
- * call back into the software toggle handler.
- * This would deadlock if done synchronously. */
- queue_work(wl->hw->workqueue, &wl->rfkill.notify_work);
+ enabled = b43_is_hw_radio_enabled(dev);
+ if (unlikely(enabled != dev->radio_hw_enable)) {
+ dev->radio_hw_enable = enabled;
+ b43info(wl, "Radio hardware status changed to %s\n",
+ enabled ? "ENABLED" : "DISABLED");
+ mutex_unlock(&wl->mutex);
+ input_report_key(poll_dev->input, KEY_WLAN, enabled);
+ } else
+ mutex_unlock(&wl->mutex);
}
/* Called when the RFKILL toggled in software.
struct b43_rfkill *rfk = &(wl->rfkill);
int err;
+ if (rfk->rfkill) {
+ err = rfkill_register(rfk->rfkill);
+ if (err) {
+ b43warn(wl, "Failed to register RF-kill button\n");
+ goto err_free_rfk;
+ }
+ }
+ if (rfk->poll_dev) {
+ err = input_register_polled_device(rfk->poll_dev);
+ if (err) {
+ b43warn(wl, "Failed to register RF-kill polldev\n");
+ goto err_free_polldev;
+ }
+ }
+
+ return;
+err_free_rfk:
+ rfkill_free(rfk->rfkill);
+ rfk->rfkill = NULL;
+err_free_polldev:
+ input_free_polled_device(rfk->poll_dev);
+ rfk->poll_dev = NULL;
+}
+
+void b43_rfkill_exit(struct b43_wldev *dev)
+{
+ struct b43_rfkill *rfk = &(dev->wl->rfkill);
+
+ if (rfk->poll_dev)
+ input_unregister_polled_device(rfk->poll_dev);
+ if (rfk->rfkill)
+ rfkill_unregister(rfk->rfkill);
+}
+
+void b43_rfkill_alloc(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+ struct b43_rfkill *rfk = &(wl->rfkill);
+
snprintf(rfk->name, sizeof(rfk->name),
"b43-%s", wiphy_name(wl->hw->wiphy));
+
rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
- if (!rfk->rfkill)
- goto error;
+ if (!rfk->rfkill) {
+ b43warn(wl, "Failed to allocate RF-kill button\n");
+ return;
+ }
rfk->rfkill->name = rfk->name;
rfk->rfkill->state = RFKILL_STATE_ON;
rfk->rfkill->data = dev;
rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle;
rfk->rfkill->user_claim_unsupported = 1;
- INIT_WORK(&rfk->notify_work, b43_notify_rfkill_press);
-
- err = rfkill_register(rfk->rfkill);
- if (err)
- goto error;
-
- return;
-error:
- b43warn(dev->wl, "Failed to initialize the RF-kill button\n");
- rfkill_free(rfk->rfkill);
- rfk->rfkill = NULL;
+ rfk->poll_dev = input_allocate_polled_device();
+ if (rfk->poll_dev) {
+ rfk->poll_dev->private = dev;
+ rfk->poll_dev->poll = b43_rfkill_poll;
+ rfk->poll_dev->poll_interval = 1000; /* msecs */
+ } else
+ b43warn(wl, "Failed to allocate RF-kill polldev\n");
}
-void b43_rfkill_exit(struct b43_wldev *dev)
+void b43_rfkill_free(struct b43_wldev *dev)
{
struct b43_rfkill *rfk = &(dev->wl->rfkill);
- if (!rfk->rfkill)
- return;
- cancel_work_sync(&rfk->notify_work);
- rfkill_unregister(rfk->rfkill);
+ input_free_polled_device(rfk->poll_dev);
+ rfk->poll_dev = NULL;
rfkill_free(rfk->rfkill);
rfk->rfkill = NULL;
}
#ifdef CONFIG_B43_RFKILL
#include <linux/rfkill.h>
+#include <linux/input-polldev.h>
+
struct b43_rfkill {
/* The RFKILL subsystem data structure */
struct rfkill *rfkill;
+ /* The poll device for the RFKILL input button */
+ struct input_polled_dev *poll_dev;
/* The unique name of this rfkill switch */
char name[32];
- /* Workqueue for asynchronous notification. */
- struct work_struct notify_work;
};
+/* All the init functions return void, because we are not interested
+ * in failing the b43 init process when rfkill init failed. */
+void b43_rfkill_alloc(struct b43_wldev *dev);
+void b43_rfkill_free(struct b43_wldev *dev);
void b43_rfkill_init(struct b43_wldev *dev);
void b43_rfkill_exit(struct b43_wldev *dev);
-void b43_rfkill_toggled(struct b43_wldev *dev, bool on);
+
char * b43_rfkill_led_name(struct b43_wldev *dev);
/* empty */
};
-static inline void b43_rfkill_init(struct b43_wldev *dev)
+static inline void b43_rfkill_alloc(struct b43_wldev *dev)
{
}
-static inline void b43_rfkill_exit(struct b43_wldev *dev)
+static inline void b43_rfkill_free(struct b43_wldev *dev)
{
}
-static inline void b43_rfkill_toggled(struct b43_wldev *dev, bool on)
+static inline void b43_rfkill_init(struct b43_wldev *dev)
+{
+}
+static inline void b43_rfkill_exit(struct b43_wldev *dev)
{
}
static inline char * b43_rfkill_led_name(struct b43_wldev *dev)
projects / linux-2.6 / commitdiff