# Read in the TEMPKEYDATAFILE, but avoid using a subshell like a
# while read line otherwise would do
exec 4<> "${TEMPKEYDATA}"
- error=""
+ KEYUID=""
+ #pub:-:4096:1:FAB983612A6554FA:2011-03-24:2011-07-22::-:buildd autosigning key poulenc <buildd_powerpc-poulenc@buildd.debian.org>:
+
+ # Of course this sucky gpg crapshit of an "interface" does give you different things depending on how people
+ # created their keys. And of course the buildd people created the test keys differently to what they now do
+ # which just means extra work for nothing. So as they now do other steps, the thing we get back suddenly looks like
+
+ #pub:-:4096:1:99595DC7865BEAD2:2011-03-26:2011-07-24::-:
+ #uid:::::::::buildd autosigning key corelli <buildd_mips-corelli@buildd.debian.org>:
+
+ # Besides fiddling out the data we need to check later, this regex also check:
+ # - the keytype (:1:, 1 there means RSA)
+ # - the UID
+ # - that the key does have an expiration date (or it wont match, the second date
+ # field would be empty
+ regex="^pub:-:([0-9]{4}):1:([0-9A-F]{16}):([0-9]{4}-[0-9]{2}-[0-9]{2}):([0-9]{4}-[0-9]{2}-[0-9]{2})::-:(buildd autosigning key ${BUILDD} <buildd_${ARCH}-${BUILDD}@buildd.debian.org>):$"
+ regex2="^pub:-:([0-9]{4}):1:([0-9A-F]{16}):([0-9]{4}-[0-9]{2}-[0-9]{2}):([0-9]{4}-[0-9]{2}-[0-9]{2})::-:$"
+ regex3="^uid:::::::::(buildd autosigning key ${BUILDD} <buildd_${ARCH}-${BUILDD}@buildd.debian.org>):$"
while read line <&4; do
- #pub:-:4096:1:FAB983612A6554FA:2011-03-24:2011-07-22::-:buildd autosigning key poulenc <buildd_powerpc-poulenc@buildd.debian.org>:
-
- # Besides fiddling out the data we need to check later, this regex also check:
- # - the keytype (:1:, 1 there means RSA)
- # - the UID
- # - that the key does have an expiration date (or it wont match, the second date
- # field would be empty
- regex="^pub:-:([0-9]{4}):1:([0-9A-F]{16}):([0-9]{4}-[0-9]{2}-[0-9]{2}):([0-9]{4}-[0-9]{2}-[0-9]{2})::-:buildd autosigning key ${BUILDD} <buildd_${ARCH}-${BUILDD}@buildd.debian.org>:$"
if [[ $line =~ $regex ]]; then
KEYSIZE=${BASH_REMATCH[1]}
KEYID=${BASH_REMATCH[2]}
KEYCREATE=${BASH_REMATCH[3]}
KEYEXPIRE=${BASH_REMATCH[4]}
-
- # We do want 4096 or anything above
- if [ ${KEYSIZE} -lt 4096 ]; then
- log "Keysize ${KEYSIZE} too small"
- error="${error} Keysize ${KEYSIZE} too small"
- continue
- fi
-
- # We want a maximum lifetime of 120 days, so check that.
- # Easiest to compare in epoch, so lets see, 120 days midnight from now,
- # compared with their set expiration date at midnight
- # maxdate should turn out higher. just in case we make it 121 for this check
- maxdate=$(date -d '121 day 00:00:00' +%s)
- theirexpire=$(date -d "${KEYEXPIRE} 00:00:00" +%s)
- if [ ${theirexpire} -gt ${maxdate} ]; then
- log "Key expiry ${KEYEXPIRE} wrong"
- error="${error} Key expiry ${KEYEXPIRE} wrong"
- continue
- fi
- else
- log "Unknown line $line, sod off"
- error="${error} Unknown line $line, sod off"
- continue
- fi
+ KEYUID=${BASH_REMATCH[5]}
+ elif [[ $line =~ $regex2 ]]; then
+ KEYSIZE=${BASH_REMATCH[1]}
+ KEYID=${BASH_REMATCH[2]}
+ KEYCREATE=${BASH_REMATCH[3]}
+ KEYEXPIRE=${BASH_REMATCH[4]}
+ elif [[ $line =~ $regex3 ]]; then
+ KEYUID=${BASH_REMATCH[1]}
+ else
+ log "Didn't recognize the key. Go kiss gpg"
+ DATE=$(date -Is)
+ mv "${INCOMING}/${file}" "${ERRORS}/badkey.${file}.${DATE}"
+ mv "${GPGSTATUS}" "${ERRORS}/badkey.${file}.gpgstatus.${DATE}"
+ mv "${GPGLOGS}" "${ERRORS}/badkey.${file}.gpglogs.${DATE}"
+ rm -f "${GPGOUTF}"
+ continue
+ fi
done
- if [ -n "${error}" ]; then
- log ${error}
+ if [ -z "${KEYUID}" ]; then
+ log "Did not recognize the UID format"
DATE=$(date -Is)
- mv "${INCOMING}/${file}" "${ERRORS}/badkey.${file}.${DATE}"
- mv "${GPGSTATUS}" "${ERRORS}/badkey.${file}.gpgstatus.${DATE}"
- mv "${GPGLOGS}" "${ERRORS}/badkey.${file}.gpglogs.${DATE}"
- echo "${error}" >> "${ERRORS}/badkey.${file}.error.${DATE}"
+ mv "${INCOMING}/${file}" "${ERRORS}/keyuid.${file}.${DATE}"
+ mv "${GPGSTATUS}" "${ERRORS}/keyuid.${file}.gpgstatus.${DATE}"
+ mv "${GPGLOGS}" "${ERRORS}/keyuid.${file}.gpglogs.${DATE}"
rm -f "${GPGOUTF}"
- continue
+ continue
+ fi
+ # We do want 4096 or anything above
+ if [ ${KEYSIZE} -lt 4096 ]; then
+ log "Keysize ${KEYSIZE} too small"
+ DATE=$(date -Is)
+ mv "${INCOMING}/${file}" "${ERRORS}/keysize.${file}.${DATE}"
+ mv "${GPGSTATUS}" "${ERRORS}/keysize.${file}.gpgstatus.${DATE}"
+ mv "${GPGLOGS}" "${ERRORS}/keysize.${file}.gpglogs.${DATE}"
+ rm -f "${GPGOUTF}"
+ continue
+ fi
+
+ # We want a maximum lifetime of 120 days, so check that.
+ # Easiest to compare in epoch, so lets see, 120 days midnight from now,
+ # compared with their set expiration date at midnight
+ # maxdate should turn out higher. just in case we make it 121 for this check
+ maxdate=$(date -d '121 day 00:00:00' +%s)
+ theirexpire=$(date -d "${KEYEXPIRE} 00:00:00" +%s)
+ if [ ${theirexpire} -gt ${maxdate} ]; then
+ log "Key expiry ${KEYEXPIRE} wrong"
+ DATE=$(date -Is)
+ mv "${INCOMING}/${file}" "${ERRORS}/keyexpire.${file}.${DATE}"
+ mv "${GPGSTATUS}" "${ERRORS}/keyexpire.${file}.gpgstatus.${DATE}"
+ mv "${GPGLOGS}" "${ERRORS}/keyexpire.${file}.gpglogs.${DATE}"
+ rm -f "${GPGOUTF}"
+ continue
fi
# And now lets check how many keys this buildd already has. 2 is the maximum, so key
projects / dak / commitdiff