2.26.02.006 - Fix 9550SX pchip reset timeout.
Add big endian support.
2.26.02.007 - Disable local interrupts during kmap/unmap_atomic().
+ 2.26.02.008 - Free irq handler in __twa_shutdown().
+ Serialize reset code.
+ Add support for 9650SE controllers.
*/
#include <linux/module.h>
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.007"
+#define TW_DRIVER_VERSION "2.26.02.008"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
goto out;
}
- tw_dev->working_srl = fw_on_ctlr_srl;
- tw_dev->working_branch = fw_on_ctlr_branch;
- tw_dev->working_build = fw_on_ctlr_build;
+ tw_dev->tw_compat_info.working_srl = fw_on_ctlr_srl;
+ tw_dev->tw_compat_info.working_branch = fw_on_ctlr_branch;
+ tw_dev->tw_compat_info.working_build = fw_on_ctlr_build;
/* Try base mode compatibility */
if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
}
goto out;
}
- tw_dev->working_srl = TW_BASE_FW_SRL;
- tw_dev->working_branch = TW_BASE_FW_BRANCH;
- tw_dev->working_build = TW_BASE_FW_BUILD;
- }
+ tw_dev->tw_compat_info.working_srl = TW_BASE_FW_SRL;
+ tw_dev->tw_compat_info.working_branch = TW_BASE_FW_BRANCH;
+ tw_dev->tw_compat_info.working_build = TW_BASE_FW_BUILD;
+ }
+
+ /* Load rest of compatibility struct */
+ strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+ tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
+ tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
+ tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
+ tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
+ tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
+ tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
+ tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
+ tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
+ tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
+
retval = 0;
out:
return retval;
goto out2;
/* Check data buffer size */
- if (driver_command.buffer_length > TW_MAX_SECTORS * 512) {
+ if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
retval = TW_IOCTL_ERROR_OS_EINVAL;
goto out2;
}
/* Now wait for command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
- /* See if we reset while waiting for the ioctl to complete */
- if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- retval = TW_IOCTL_ERROR_OS_ERESTARTSYS;
- goto out3;
- }
-
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
tw_dev->host->host_no, TW_DRIVER, 0xc,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
- spin_lock_irqsave(tw_dev->host->host_lock, flags);
- tw_dev->state[request_id] = TW_S_COMPLETED;
- twa_free_request_id(tw_dev, request_id);
- tw_dev->posted_request_count--;
- spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
twa_reset_device_extension(tw_dev, 1);
goto out3;
}
tw_ioctl->driver_command.status = 0;
/* Copy compatiblity struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
- strncpy(tw_compat_info->driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
- tw_compat_info->working_srl = tw_dev->working_srl;
- tw_compat_info->working_branch = tw_dev->working_branch;
- tw_compat_info->working_build = tw_dev->working_build;
- tw_compat_info->driver_srl_high = TW_CURRENT_DRIVER_SRL;
- tw_compat_info->driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
- tw_compat_info->driver_build_high = TW_CURRENT_DRIVER_BUILD;
- tw_compat_info->driver_srl_low = TW_BASE_FW_SRL;
- tw_compat_info->driver_branch_low = TW_BASE_FW_BRANCH;
- tw_compat_info->driver_build_low = TW_BASE_FW_BUILD;
+ memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
case TW_IOCTL_GET_LAST_EVENT:
if (tw_dev->event_queue_wrapped) {
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
+ if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) || (!test_bit(TW_IN_RESET, &tw_dev->flags)))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
unsigned long before;
int retval = 1;
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+ msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
handled = 1;
+ /* If we are resetting, bail */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags))
+ goto twa_interrupt_bail;
+
/* Check controller for errors */
if (twa_check_bits(status_reg_value)) {
if (twa_decode_bits(tw_dev, status_reg_value)) {
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
- newcommand->request_id__lunl =
- TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id);
+ newcommand->request_id__lunl =
+ cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
newcommand->sg_list[0].length = cpu_to_le32(length);
newcommand->sgl_entries__lunh =
int retval = 1;
command_que_value = tw_dev->command_packet_phys[request_id];
+
+ /* For 9650SE write low 4 bytes first */
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ command_que_value += TW_COMMAND_OFFSET;
+ writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
+ }
+
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
- /* We successfully posted the command packet */
- if (sizeof(dma_addr_t) > 4) {
- command_que_value += TW_COMMAND_OFFSET;
- writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
- writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ /* Now write upper 4 bytes */
+ writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
- writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ if (sizeof(dma_addr_t) > 4) {
+ command_que_value += TW_COMMAND_OFFSET;
+ writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+ } else {
+ writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ }
}
tw_dev->state[request_id] = TW_S_POSTED;
tw_dev->posted_request_count++;
goto out;
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+ clear_bit(TW_IN_RESET, &tw_dev->flags);
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- /* Wake up any ioctl that was pending before the reset */
- if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- } else {
- tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- wake_up(&tw_dev->ioctl_wqueue);
- }
retval = 0;
out:
return retval;
"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
+ /* Make sure we are not issuing an ioctl or resetting from ioctl */
+ mutex_lock(&tw_dev->ioctl_lock);
+
/* Now reset the card and some of the device extension data */
if (twa_reset_device_extension(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
retval = SUCCESS;
out:
+ mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End twa_scsi_eh_reset() */
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ /* If we are resetting due to timed out ioctl, report as busy */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
/* Check if this FW supports luns */
- if ((SCpnt->device->lun != 0) && (tw_dev->working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
+ if ((SCpnt->device->lun != 0) && (tw_dev->tw_compat_info.working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
SCpnt->result = (DID_BAD_TARGET << 16);
done(SCpnt);
retval = 0;
/* Disable interrupts */
TW_DISABLE_INTERRUPTS(tw_dev);
+ /* Free up the IRQ */
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
/* Initialize the card */
if (twa_reset_sequence(tw_dev, 0))
- goto out_release_mem_region;
+ goto out_iounmap;
/* Set host specific parameters */
- host->max_id = TW_MAX_UNITS;
+ if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
+ host->max_id = TW_MAX_UNITS_9650SE;
+ else
+ host->max_id = TW_MAX_UNITS;
+
host->max_cmd_len = TW_MAX_CDB_LEN;
/* Channels aren't supported by adapter */
- host->max_lun = TW_MAX_LUNS(tw_dev->working_srl);
+ host->max_lun = TW_MAX_LUNS(tw_dev->tw_compat_info.working_srl);
host->max_channel = 0;
/* Register the card with the kernel SCSI layer */
retval = scsi_add_host(host, &pdev->dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
- goto out_release_mem_region;
+ goto out_iounmap;
}
pci_set_drvdata(pdev, host);
out_remove_host:
scsi_remove_host(host);
+out_iounmap:
+ iounmap(tw_dev->base_addr);
out_release_mem_region:
pci_release_regions(pdev);
out_free_device_extension:
twa_major = -1;
}
- /* Free up the IRQ */
- free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
/* Shutdown the card */
__twa_shutdown(tw_dev);
+ /* Free IO remapping */
+ iounmap(tw_dev->base_addr);
+
/* Free up the mem region */
pci_release_regions(pdev);
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);