[ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type

Having a both-edge sensitive irq trigger type is required for the
generic gpio-keys input driver; alas the ep93xx does not support
both-edge gpio triggers in hardware, so this patch implements them by
switching edge polarity on each triggered interrupt.  This is the same
approach as taken by the Orion SoC both-edge gpio irq support
implementation.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 58957d7a5763fa17390a55962d777b5d3e5a2548..2788da06417caed1a2d3e544a66779ce1d261ce8 100644 (file)
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -3,6 +3,7 @@
  * Core routines for Cirrus EP93xx chips.
  *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
  * Thanks go to Michael Burian and Ray Lehtiniemi for their key
  * role in the ep93xx linux community.
@@ -315,12 +316,29 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
        desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
 }
 
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+       int line = irq_to_gpio(irq);
+       int port = line >> 3;
+       int port_mask = 1 << (line & 7);
+
+       if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+               gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+               update_gpio_int_params(port);
+       }
+
+       __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
 static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 {
        int line = irq_to_gpio(irq);
        int port = line >> 3;
        int port_mask = 1 << (line & 7);
 
+       if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+               gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
        gpio_int_unmasked[port] &= ~port_mask;
        update_gpio_int_params(port);
 
@@ -353,31 +371,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq)
  */
 static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 {
+       struct irq_desc *desc = irq_desc + irq;
        const int gpio = irq_to_gpio(irq);
        const int port = gpio >> 3;
        const int port_mask = 1 << (gpio & 7);
 
        ep93xx_gpio_set_direction(gpio, GPIO_IN);
 
-       if (type & IRQT_RISING) {
-               gpio_int_enabled[port] |= port_mask;
+       switch (type) {
+       case IRQT_RISING:
                gpio_int_type1[port] |= port_mask;
                gpio_int_type2[port] |= port_mask;
-       } else if (type & IRQT_FALLING) {
-               gpio_int_enabled[port] |= port_mask;
+               desc->handle_irq = handle_edge_irq;
+               break;
+       case IRQT_FALLING:
                gpio_int_type1[port] |= port_mask;
                gpio_int_type2[port] &= ~port_mask;
-       } else if (type & IRQT_HIGH) {
-               gpio_int_enabled[port] |= port_mask;
+               desc->handle_irq = handle_edge_irq;
+               break;
+       case IRQT_HIGH:
                gpio_int_type1[port] &= ~port_mask;
                gpio_int_type2[port] |= port_mask;
-       } else if (type & IRQT_LOW) {
-               gpio_int_enabled[port] |= port_mask;
+               desc->handle_irq = handle_level_irq;
+               break;
+       case IRQT_LOW:
                gpio_int_type1[port] &= ~port_mask;
                gpio_int_type2[port] &= ~port_mask;
-       } else {
-               gpio_int_enabled[port] &= ~port_mask;
+               desc->handle_irq = handle_level_irq;
+               break;
+       case IRQT_BOTHEDGE:
+               gpio_int_type1[port] |= port_mask;
+               /* set initial polarity based on current input level */
+               if (gpio_get_value(gpio))
+                       gpio_int_type2[port] &= ~port_mask; /* falling */
+               else
+                       gpio_int_type2[port] |= port_mask; /* rising */
+               desc->handle_irq = handle_edge_irq;
+               break;
+       default:
+               pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
+                      type, gpio);
+               return -EINVAL;
        }
+
+       gpio_int_enabled[port] |= port_mask;
+
+       desc->status &= ~IRQ_TYPE_SENSE_MASK;
+       desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
        update_gpio_int_params(port);
 
        return 0;
@@ -385,7 +426,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 
 static struct irq_chip ep93xx_gpio_irq_chip = {
        .name           = "GPIO",
-       .ack            = ep93xx_gpio_irq_mask_ack,
+       .ack            = ep93xx_gpio_irq_ack,
+       .mask_ack       = ep93xx_gpio_irq_mask_ack,
        .mask           = ep93xx_gpio_irq_mask,
        .unmask         = ep93xx_gpio_irq_unmask,
        .set_type       = ep93xx_gpio_irq_type,