]> err.no Git - linux-2.6/commitdiff
atmel: return ENOENT on request_firmware failure
authorDan Williams <dcbw@redhat.com>
Mon, 18 Aug 2008 19:40:02 +0000 (15:40 -0400)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 27 Aug 2008 00:06:30 +0000 (20:06 -0400)
Return errors from request_firmware() (like other drivers that do
firmware load on device open) and make up plausible codes for other
error conditions. Gives userspace tools like NetworkManager a clue that
firmware may be missing when the result of setting IFF_UP is ENOENT.

Signed-off-by: Dan Williams <dcbw@redhat.com>
v2: fix reversed check of atmel_wakeup_firmware() in probe_atmel_card()
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/atmel.c

index bd35bb0a14803d0daa4b9691d86426d6968299f2..f23bcd07dee87068644a7ea5c00c78e69b1257b4 100644 (file)
@@ -1304,7 +1304,7 @@ EXPORT_SYMBOL(atmel_open);
 int atmel_open(struct net_device *dev)
 {
        struct atmel_private *priv = netdev_priv(dev);
-       int i, channel;
+       int i, channel, err;
 
        /* any scheduled timer is no longer needed and might screw things up.. */
        del_timer_sync(&priv->management_timer);
@@ -1328,8 +1328,9 @@ int atmel_open(struct net_device *dev)
        priv->site_survey_state = SITE_SURVEY_IDLE;
        priv->station_is_associated = 0;
 
-       if (!reset_atmel_card(dev))
-               return -EAGAIN;
+       err = reset_atmel_card(dev);
+       if (err)
+               return err;
 
        if (priv->config_reg_domain) {
                priv->reg_domain = priv->config_reg_domain;
@@ -3580,12 +3581,12 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 
        if (i == 0) {
                printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
-               return 0;
+               return -EIO;
        }
 
        if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
                printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
-               return 0;
+               return -ENODEV;
        }
 
        /* now check for completion of MAC initialization through
@@ -3609,19 +3610,19 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
        if (i == 0) {
                printk(KERN_ALERT "%s: MAC failed to initialise.\n",
                                priv->dev->name);
-               return 0;
+               return -EIO;
        }
 
        /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
        if ((mr3 & MAC_INIT_COMPLETE) &&
            !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
                printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
-               return 0;
+               return -EIO;
        }
        if ((mr1 & MAC_INIT_COMPLETE) &&
            !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
                printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
-               return 0;
+               return -EIO;
        }
 
        atmel_copy_to_host(priv->dev, (unsigned char *)iface,
@@ -3642,7 +3643,7 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
        iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
        iface->mac_status = le16_to_cpu(iface->mac_status);
 
-       return 1;
+       return 0;
 }
 
 /* determine type of memory and MAC address */
@@ -3693,7 +3694,7 @@ static int probe_atmel_card(struct net_device *dev)
                /* Standard firmware in flash, boot it up and ask
                   for the Mac Address */
                priv->card_type = CARD_TYPE_SPI_FLASH;
-               if (atmel_wakeup_firmware(priv)) {
+               if (atmel_wakeup_firmware(priv) == 0) {
                        atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
 
                        /* got address, now squash it again until the network
@@ -3835,6 +3836,7 @@ static int reset_atmel_card(struct net_device *dev)
        struct atmel_private *priv = netdev_priv(dev);
        u8 configuration;
        int old_state = priv->station_state;
+       int err = 0;
 
        /* data to add to the firmware names, in priority order
           this implemenents firmware versioning */
@@ -3868,11 +3870,12 @@ static int reset_atmel_card(struct net_device *dev)
                                               dev->name);
                                        strcpy(priv->firmware_id, "atmel_at76c502.bin");
                                }
-                               if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+                               err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+                               if (err != 0) {
                                        printk(KERN_ALERT
                                               "%s: firmware %s is missing, cannot continue.\n",
                                               dev->name, priv->firmware_id);
-                                       return 0;
+                                       return err;
                                }
                        } else {
                                int fw_index = 0;
@@ -3901,7 +3904,7 @@ static int reset_atmel_card(struct net_device *dev)
                                               "%s: firmware %s is missing, cannot start.\n",
                                               dev->name, priv->firmware_id);
                                        priv->firmware_id[0] = '\0';
-                                       return 0;
+                                       return -ENOENT;
                                }
                        }
 
@@ -3926,8 +3929,9 @@ static int reset_atmel_card(struct net_device *dev)
                        release_firmware(fw_entry);
        }
 
-       if (!atmel_wakeup_firmware(priv))
-               return 0;
+       err = atmel_wakeup_firmware(priv);
+       if (err != 0)
+               return err;
 
        /* Check the version and set the correct flag for wpa stuff,
           old and new firmware is incompatible.
@@ -3968,10 +3972,9 @@ static int reset_atmel_card(struct net_device *dev)
        if (!priv->radio_on_broken) {
                if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
                    CMD_STATUS_REJECTED_RADIO_OFF) {
-                       printk(KERN_INFO
-                              "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+                       printk(KERN_INFO "%s: cannot turn the radio on.\n",
                               dev->name);
-                        return 0;
+                        return -EIO;
                }
        }
 
@@ -4006,7 +4009,7 @@ static int reset_atmel_card(struct net_device *dev)
                wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
        }
 
-       return 1;
+       return 0;
 }
 
 static void atmel_send_command(struct atmel_private *priv, int command,