} else if (!sngl) {
status = dbestr;
} else {
- volatile u32 *ptr = (void *)KSEG1ADDR(address);
+ volatile u32 *ptr =
+ (void *)CKSEG1ADDR(address);
*ptr = *ptr; /* Rewrite. */
iob();
extern char genexcept_early;
/* Install exception handler */
- memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
- memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+ memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
/* read unmapped and uncached (KSEG1)
* DECstations have at least 4MB RAM
* Assume less than 480MB of RAM, as this is max for 5000/2xx
* FIXME this should be replaced by the first free page!
*/
- for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
- (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+ for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+ mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
memory_page += CHUNK_SIZE) {
dummy = *memory_page;
}
- memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+ memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
- add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+ add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
BOOT_MEM_RAM);
}
memmap *bm;
/* some free 64k */
- bm = (memmap *)KSEG0ADDR(0x28000);
+ bm = (memmap *)CKSEG0ADDR(0x28000);
bitmap_size = rex_getbitmap(bm);
static inline void ATTRIB_NORET back_to_prom(void)
{
- noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+ noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
func();
}
}
info = (tcinfo *) rex_gettcinfo();
- slot0addr = (unsigned long)KSEG1ADDR(rex_slot_address(0));
+ slot0addr = (unsigned long)CKSEG1ADDR(rex_slot_address(0));
switch (mips_machtype) {
case MACH_DS5000_200:
tc_bus[i].name, tc_bus[i].firmware);
}
#endif
- ioport_resource.end = KSEG2 - 1;
}
}
#ifdef CONFIG_MACH_DECSTATION
case MACH_DS5000_2X0:
case MACH_DS5900:
- system_base = KSEG1ADDR(0x1f800000);
+ system_base = CKSEG1ADDR(0x1f800000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_1XX:
- system_base = KSEG1ADDR(0x1c000000);
+ system_base = CKSEG1ADDR(0x1c000000);
n_chips = 2;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
break;
case MACH_DS5000_XX:
- system_base = KSEG1ADDR(0x1c000000);
+ system_base = CKSEG1ADDR(0x1c000000);
n_chips = 1;
zs_parms = &ds_parms;
zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
#include <asm/addrspace.h>
-#define KN01_SLOT_BASE KSEG1ADDR(0x10000000)
+#define KN01_SLOT_BASE CKSEG1ADDR(0x10000000)
#define KN01_SLOT_SIZE 0x01000000
/*
/*
* Frame buffer memory address.
*/
-#define KN01_VFB_MEM KSEG1ADDR(0x0fc00000)
+#define KN01_VFB_MEM CKSEG1ADDR(0x0fc00000)
/*
* CPU interrupt bits.
#include <asm/dec/ecc.h>
-#define KN02_SLOT_BASE KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_BASE CKSEG1ADDR(0x1fc00000)
#define KN02_SLOT_SIZE 0x00080000
/*
#include <asm/addrspace.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN02XA_SLOT_BASE KSEG1ADDR(0x1c000000)
+#define KN02XA_SLOT_BASE CKSEG1ADDR(0x1c000000)
/*
* Some port addresses...
/*
* Memory control ASIC registers.
*/
-#define KN02XA_MER KSEG1ADDR(0x0c400000) /* memory error register */
-#define KN02XA_MSR KSEG1ADDR(0x0c800000) /* memory size register */
+#define KN02XA_MER CKSEG1ADDR(0x0c400000) /* memory error register */
+#define KN02XA_MSR CKSEG1ADDR(0x0c800000) /* memory size register */
/*
* CPU control ASIC registers.
*/
-#define KN02XA_MEM_CONF KSEG1ADDR(0x0e000000) /* write timeout config */
-#define KN02XA_EAR KSEG1ADDR(0x0e000004) /* error address register */
-#define KN02XA_BOOT0 KSEG1ADDR(0x0e000008) /* boot 0 register */
-#define KN02XA_MEM_INTR KSEG1ADDR(0x0e00000c) /* write err IRQ stat & ack */
+#define KN02XA_MEM_CONF CKSEG1ADDR(0x0e000000) /* write timeout config */
+#define KN02XA_EAR CKSEG1ADDR(0x0e000004) /* error address register */
+#define KN02XA_BOOT0 CKSEG1ADDR(0x0e000008) /* boot 0 register */
+#define KN02XA_MEM_INTR CKSEG1ADDR(0x0e00000c) /* write err IRQ stat & ack */
/*
* Memory Error Register bits, common definitions.
#include <asm/dec/ecc.h>
#include <asm/dec/ioasic_addrs.h>
-#define KN03_SLOT_BASE KSEG1ADDR(0x1f800000)
+#define KN03_SLOT_BASE CKSEG1ADDR(0x1f800000)
/*
* Some port addresses...
* PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
* Many of these will work for MIPSen as well!
*/
-#define VEC_RESET (u64 *)KSEG1ADDR(0x1fc00000)
+#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000)
/* Prom base address */
#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */