[PATCH] USB: add a driver for the AirPrime CDMA Wireless PC card.

Easier than trying to use the generic usb-serial driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 0c4aa00bb39d3dea51a7b9f393ddc9b9bb147780..bc798edf0358828f83ab486bde704d52f9ee1fbf 100644 (file)
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC
          support" be compiled as a module for this driver to be used
          properly.
 
+config USB_SERIAL_AIRPRIME
+       tristate "USB AirPrime CDMA Wireless Driver"
+       depends on USB_SERIAL
+       help
+         Say Y here if you want to use a AirPrime CDMA Wireless PC card.
+
+         To compile this driver as a module, choose M here: the
+         module will be called airprime.
+
 config USB_SERIAL_BELKIN
        tristate "USB Belkin and Peracom Single Port Serial Driver"
        depends on USB_SERIAL

diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index b0aac47d1959a1cead78236b611e0ee7c43f342f..d56ff6d86cce220860ae63ca7bfbab532956847b 100644 (file)
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB)             += ezusb.o
 
 usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
+obj-$(CONFIG_USB_SERIAL_AIRPRIME)              += airprime.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)                        += belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)                        += cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)             += cyberjack.o

diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
new file mode 100644 (file)
index 0000000..a4ce000
--- /dev/null
+++ b/drivers/usb/serial/airprime.c
@@ -0,0 +1,63 @@
+/*
+ * AirPrime CDMA Wireless Serial USB driver
+ *
+ * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License version
+ *     2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+       { USB_DEVICE(0xf3d, 0x0112) },
+       { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver airprime_driver = {
+       .owner =        THIS_MODULE,
+       .name =         "airprime",
+       .probe =        usb_serial_probe,
+       .disconnect =   usb_serial_disconnect,
+       .id_table =     id_table,
+};
+
+static struct usb_serial_device_type airprime_device = {
+       .owner =                THIS_MODULE,
+       .name =                 "airprime",
+       .id_table =             id_table,
+       .num_interrupt_in =     NUM_DONT_CARE,
+       .num_bulk_in =          NUM_DONT_CARE,
+       .num_bulk_out =         NUM_DONT_CARE,
+       .num_ports =            1,
+};
+
+static int __init airprime_init(void)
+{
+       int retval;
+
+       retval = usb_serial_register(&airprime_device);
+       if (retval)
+               return retval;
+       retval = usb_register(&airprime_driver);
+       if (retval)
+               usb_serial_deregister(&airprime_device);
+       return retval;
+}
+
+static void __exit airprime_exit(void)
+{
+       usb_deregister(&airprime_driver);
+       usb_serial_deregister(&airprime_device);
+}
+
+module_init(airprime_init);
+module_exit(airprime_exit);
+MODULE_LICENSE("GPL");