#include "em28xx.h"
-struct em2820_board em2820_boards[] = {
+struct em28xx_board em28xx_boards[] = {
[EM2800_BOARD_UNKNOWN] = {
.name = "Unknown EM2800 video grabber",
.is_em2800 = 1,
.norm = VIDEO_MODE_PAL,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.norm = VIDEO_MODE_PAL,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 2,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 2,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE,
.has_tuner = 1,
- .decoder = EM2820_TVP5150,
+ .decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
/*FIXME: S-Video not tested */
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 0,
.amux = 0,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 2,
.amux = 1,
}},
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE,
.has_tuner = 1,
- .decoder = EM2820_SAA7114,
+ .decoder = EM28XX_SAA7114,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 4,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 2,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 2,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.tuner_type = TUNER_PHILIPS_ATSC,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_TELEVISION,
+ .type = EM28XX_VMUX_TELEVISION,
.vmux = 2,
.amux = 0,
},{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
.vchannels = 3,
.norm = VIDEO_MODE_PAL,
.has_tuner = 0,
- .decoder = EM2820_SAA7113,
+ .decoder = EM28XX_SAA7113,
.input = {{
- .type = EM2820_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = 1,
},{
- .type = EM2820_VMUX_SVIDEO,
+ .type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
},
};
-const unsigned int em2820_bcount = ARRAY_SIZE(em2820_boards);
+const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
/* table of devices that work with this driver */
-struct usb_device_id em2820_id_table [] = {
+struct usb_device_id em28xx_id_table [] = {
{ USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_MSI_VOX_USB_2 },
{ USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
{ },
};
-void em2820_card_setup(struct em2820 *dev)
+void em28xx_card_setup(struct em28xx *dev)
{
/* request some modules */
if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) {
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->has_msp34xx=1;
} else dev->has_msp34xx=0;
- em2820_write_regs_req(dev,0x06,0x00,"\x40",1);// Serial Bus Frequency Select Register
- em2820_write_regs_req(dev,0x0f,0x00,"\x87",1);// XCLK Frequency Select Register
- em2820_write_regs_req(dev,0x88,0x0d,"\xd0",1);
+ em28xx_write_regs_req(dev,0x06,0x00,"\x40",1);// Serial Bus Frequency Select Register
+ em28xx_write_regs_req(dev,0x0f,0x00,"\x87",1);// XCLK Frequency Select Register
+ em28xx_write_regs_req(dev,0x88,0x0d,"\xd0",1);
}
}
-EXPORT_SYMBOL(em2820_boards);
-EXPORT_SYMBOL(em2820_bcount);
-EXPORT_SYMBOL(em2820_id_table);
+EXPORT_SYMBOL(em28xx_boards);
+EXPORT_SYMBOL(em28xx_bcount);
+EXPORT_SYMBOL(em28xx_id_table);
-MODULE_DEVICE_TABLE (usb, em2820_id_table);
+MODULE_DEVICE_TABLE (usb, em28xx_id_table);
/*
- em2820-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
+ em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
module_param(core_debug,int,0644);
MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
-#define em2820_coredbg(fmt, arg...) do {\
+#define em28xx_coredbg(fmt, arg...) do {\
if (core_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
module_param(reg_debug,int,0644);
MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
-#define em2820_regdbg(fmt, arg...) do {\
+#define em28xx_regdbg(fmt, arg...) do {\
if (reg_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
module_param(isoc_debug,int,0644);
MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]");
-#define em2820_isocdbg(fmt, arg...) do {\
+#define em28xx_isocdbg(fmt, arg...) do {\
if (isoc_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
-static int alt = EM2820_PINOUT;
+static int alt = EM28XX_PINOUT;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
};
#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
-void em2820_print_ioctl(char *name, unsigned int cmd)
+void em28xx_print_ioctl(char *name, unsigned int cmd)
{
char *dir;
}
/*
- * em2820_request_buffers()
+ * em28xx_request_buffers()
* allocate a number of buffers
*/
-u32 em2820_request_buffers(struct em2820 *dev, u32 count)
+u32 em28xx_request_buffers(struct em28xx *dev, u32 count)
{
const size_t imagesize = PAGE_ALIGN(dev->frame_size); /*needs to be page aligned cause the buffers can be mapped individually! */
void *buff = NULL;
u32 i;
- em2820_coredbg("requested %i buffers with size %i", count, imagesize);
- if (count > EM2820_NUM_FRAMES)
- count = EM2820_NUM_FRAMES;
+ em28xx_coredbg("requested %i buffers with size %i", count, imagesize);
+ if (count > EM28XX_NUM_FRAMES)
+ count = EM28XX_NUM_FRAMES;
dev->num_frames = count;
while (dev->num_frames > 0) {
}
/*
- * em2820_queue_unusedframes()
+ * em28xx_queue_unusedframes()
* add all frames that are not currently in use to the inbuffer queue
*/
-void em2820_queue_unusedframes(struct em2820 *dev)
+void em28xx_queue_unusedframes(struct em28xx *dev)
{
unsigned long lock_flags;
u32 i;
}
/*
- * em2820_release_buffers()
+ * em28xx_release_buffers()
* free frame buffers
*/
-void em2820_release_buffers(struct em2820 *dev)
+void em28xx_release_buffers(struct em28xx *dev)
{
if (dev->num_frames) {
rvfree(dev->frame[0].bufmem,
}
/*
- * em2820_read_reg_req()
+ * em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
-int em2820_read_reg_req_len(struct em2820 *dev, u8 req, u16 reg,
+int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len)
{
int ret, byte;
- em2820_regdbg("req=%02x, reg=%02x ", req, reg);
+ em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
}
/*
- * em2820_read_reg_req()
+ * em28xx_read_reg_req()
* reads data from the usb device specifying bRequest
*/
-int em2820_read_reg_req(struct em2820 *dev, u8 req, u16 reg)
+int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
{
u8 val;
int ret;
- em2820_regdbg("req=%02x, reg=%02x:", req, reg);
+ em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
return val;
}
-int em2820_read_reg(struct em2820 *dev, u16 reg)
+int em28xx_read_reg(struct em28xx *dev, u16 reg)
{
- return em2820_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
+ return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
}
/*
- * em2820_write_regs_req()
+ * em28xx_write_regs_req()
* sends data to the usb device, specifying bRequest
*/
-int em2820_write_regs_req(struct em2820 *dev, u8 req, u16 reg, char *buf,
+int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len)
{
int ret;
/*usb_control_msg seems to expect a kmalloced buffer */
unsigned char *bufs = kmalloc(len, GFP_KERNEL);
- em2820_regdbg("req=%02x reg=%02x:", req, reg);
+ em28xx_regdbg("req=%02x reg=%02x:", req, reg);
if (reg_debug) {
int i;
return ret;
}
-int em2820_write_regs(struct em2820 *dev, u16 reg, char *buf, int len)
+int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
{
- return em2820_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
+ return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
}
/*
- * em2820_write_reg_bits()
+ * em28xx_write_reg_bits()
* sets only some bits (specified by bitmask) of a register, by first reading
* the actual value
*/
-int em2820_write_reg_bits(struct em2820 *dev, u16 reg, u8 val,
+int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask)
{
int oldval;
u8 newval;
- if ((oldval = em2820_read_reg(dev, reg)) < 0)
+ if ((oldval = em28xx_read_reg(dev, reg)) < 0)
return oldval;
newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
- return em2820_write_regs(dev, reg, &newval, 1);
+ return em28xx_write_regs(dev, reg, &newval, 1);
}
/*
- * em2820_write_ac97()
+ * em28xx_write_ac97()
* write a 16 bit value to the specified AC97 address (LSB first!)
*/
-int em2820_write_ac97(struct em2820 *dev, u8 reg, u8 * val)
+int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val)
{
int ret;
u8 addr = reg & 0x7f;
- if ((ret = em2820_write_regs(dev, AC97LSB_REG, val, 2)) < 0)
+ if ((ret = em28xx_write_regs(dev, AC97LSB_REG, val, 2)) < 0)
return ret;
- if ((ret = em2820_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0)
+ if ((ret = em28xx_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0)
return ret;
- if ((ret = em2820_read_reg(dev, AC97BUSY_REG)) < 0)
+ if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
return ret;
else if (((u8) ret) & 0x01) {
- em2820_warn ("AC97 command still being exectuted: not handled properly!\n");
+ em28xx_warn ("AC97 command still being exectuted: not handled properly!\n");
}
return 0;
}
-int em2820_audio_analog_set(struct em2820 *dev)
+int em28xx_audio_analog_set(struct em28xx *dev)
{
char s[2] = { 0x00, 0x00 };
s[0] |= 0x1f - dev->volume;
s[1] |= 0x1f - dev->volume;
if (dev->mute)
s[1] |= 0x80;
- return em2820_write_ac97(dev, MASTER_AC97, s);
+ return em28xx_write_ac97(dev, MASTER_AC97, s);
}
-int em2820_colorlevels_set_default(struct em2820 *dev)
+int em28xx_colorlevels_set_default(struct em28xx *dev)
{
- em2820_write_regs(dev, YGAIN_REG, "\x10", 1); /* contrast */
- em2820_write_regs(dev, YOFFSET_REG, "\x00", 1); /* brightness */
- em2820_write_regs(dev, UVGAIN_REG, "\x10", 1); /* saturation */
- em2820_write_regs(dev, UOFFSET_REG, "\x00", 1);
- em2820_write_regs(dev, VOFFSET_REG, "\x00", 1);
- em2820_write_regs(dev, SHARPNESS_REG, "\x00", 1);
-
- em2820_write_regs(dev, GAMMA_REG, "\x20", 1);
- em2820_write_regs(dev, RGAIN_REG, "\x20", 1);
- em2820_write_regs(dev, GGAIN_REG, "\x20", 1);
- em2820_write_regs(dev, BGAIN_REG, "\x20", 1);
- em2820_write_regs(dev, ROFFSET_REG, "\x00", 1);
- em2820_write_regs(dev, GOFFSET_REG, "\x00", 1);
- return em2820_write_regs(dev, BOFFSET_REG, "\x00", 1);
+ em28xx_write_regs(dev, YGAIN_REG, "\x10", 1); /* contrast */
+ em28xx_write_regs(dev, YOFFSET_REG, "\x00", 1); /* brightness */
+ em28xx_write_regs(dev, UVGAIN_REG, "\x10", 1); /* saturation */
+ em28xx_write_regs(dev, UOFFSET_REG, "\x00", 1);
+ em28xx_write_regs(dev, VOFFSET_REG, "\x00", 1);
+ em28xx_write_regs(dev, SHARPNESS_REG, "\x00", 1);
+
+ em28xx_write_regs(dev, GAMMA_REG, "\x20", 1);
+ em28xx_write_regs(dev, RGAIN_REG, "\x20", 1);
+ em28xx_write_regs(dev, GGAIN_REG, "\x20", 1);
+ em28xx_write_regs(dev, BGAIN_REG, "\x20", 1);
+ em28xx_write_regs(dev, ROFFSET_REG, "\x00", 1);
+ em28xx_write_regs(dev, GOFFSET_REG, "\x00", 1);
+ return em28xx_write_regs(dev, BOFFSET_REG, "\x00", 1);
}
-int em2820_capture_start(struct em2820 *dev, int start)
+int em28xx_capture_start(struct em28xx *dev, int start)
{
int ret;
/* FIXME: which is the best order? */
/* video registers are sampled by VREF */
- if ((ret = em2820_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00,
+ if ((ret = em28xx_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00,
0x10)) < 0)
return ret;
/* enable video capture */
- return em2820_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1);
+ return em28xx_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1);
}
-int em2820_outfmt_set_yuv422(struct em2820 *dev)
+int em28xx_outfmt_set_yuv422(struct em28xx *dev)
{
- em2820_write_regs(dev, OUTFMT_REG, "\x34", 1);
- em2820_write_regs(dev, VINMODE_REG, "\x10", 1);
- return em2820_write_regs(dev, VINCTRL_REG, "\x11", 1);
+ em28xx_write_regs(dev, OUTFMT_REG, "\x34", 1);
+ em28xx_write_regs(dev, VINMODE_REG, "\x10", 1);
+ return em28xx_write_regs(dev, VINCTRL_REG, "\x11", 1);
}
-int em2820_accumulator_set(struct em2820 *dev, u8 xmin, u8 xmax, u8 ymin,
+int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, u8 ymin,
u8 ymax)
{
- em2820_coredbg("em2820 Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax);
+ em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax);
- em2820_write_regs(dev, XMIN_REG, &xmin, 1);
- em2820_write_regs(dev, XMAX_REG, &xmax, 1);
- em2820_write_regs(dev, YMIN_REG, &ymin, 1);
- return em2820_write_regs(dev, YMAX_REG, &ymax, 1);
+ em28xx_write_regs(dev, XMIN_REG, &xmin, 1);
+ em28xx_write_regs(dev, XMAX_REG, &xmax, 1);
+ em28xx_write_regs(dev, YMIN_REG, &ymin, 1);
+ return em28xx_write_regs(dev, YMAX_REG, &ymax, 1);
}
-int em2820_capture_area_set(struct em2820 *dev, u8 hstart, u8 vstart,
+int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
u16 width, u16 height)
{
u8 cwidth = width;
u8 cheight = height;
u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
- em2820_coredbg("em2820 Area Set: (%d,%d)\n", (width | (overflow & 2) << 7),
+ em28xx_coredbg("em28xx Area Set: (%d,%d)\n", (width | (overflow & 2) << 7),
(height | (overflow & 1) << 8));
- em2820_write_regs(dev, HSTART_REG, &hstart, 1);
- em2820_write_regs(dev, VSTART_REG, &vstart, 1);
- em2820_write_regs(dev, CWIDTH_REG, &cwidth, 1);
- em2820_write_regs(dev, CHEIGHT_REG, &cheight, 1);
- return em2820_write_regs(dev, OFLOW_REG, &overflow, 1);
+ em28xx_write_regs(dev, HSTART_REG, &hstart, 1);
+ em28xx_write_regs(dev, VSTART_REG, &vstart, 1);
+ em28xx_write_regs(dev, CWIDTH_REG, &cwidth, 1);
+ em28xx_write_regs(dev, CHEIGHT_REG, &cheight, 1);
+ return em28xx_write_regs(dev, OFLOW_REG, &overflow, 1);
}
-int em2820_scaler_set(struct em2820 *dev, u16 h, u16 v)
+int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
u8 buf[2];
buf[0] = h;
buf[1] = h >> 8;
- em2820_write_regs(dev, HSCALELOW_REG, (char *)buf, 2);
+ em28xx_write_regs(dev, HSCALELOW_REG, (char *)buf, 2);
buf[0] = v;
buf[1] = v >> 8;
- em2820_write_regs(dev, VSCALELOW_REG, (char *)buf, 2);
+ em28xx_write_regs(dev, VSCALELOW_REG, (char *)buf, 2);
/* it seems that both H and V scalers must be active to work correctly */
mode = (h || v)? 0x30: 0x00;
}
- return em2820_write_reg_bits(dev, COMPR_REG, mode, 0x30);
+ return em28xx_write_reg_bits(dev, COMPR_REG, mode, 0x30);
}
/* FIXME: this only function read values from dev */
-int em2820_resolution_set(struct em2820 *dev)
+int em28xx_resolution_set(struct em28xx *dev)
{
int width, height;
width = norm_maxw(dev);
height = norm_maxh(dev) >> 1;
- em2820_outfmt_set_yuv422(dev);
- em2820_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
- em2820_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
- return em2820_scaler_set(dev, dev->hscale, dev->vscale);
+ em28xx_outfmt_set_yuv422(dev);
+ em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
+ em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+ return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
/******************* isoc transfer handling ****************************/
#ifdef ENABLE_DEBUG_ISOC_FRAMES
-static void em2820_isoc_dump(struct urb *urb, struct pt_regs *regs)
+static void em28xx_isoc_dump(struct urb *urb, struct pt_regs *regs)
{
int len = 0;
int ntrans = 0;
}
#endif
-static inline int em2820_isoc_video(struct em2820 *dev,struct em2820_frame_t **f,
+static inline int em28xx_isoc_video(struct em28xx *dev,struct em28xx_frame_t **f,
unsigned long *lock_flags, unsigned char buf)
{
if (!(buf & 0x01)) {
/*previous frame is incomplete */
if ((*f)->fieldbytesused < dev->field_size) {
(*f)->state = F_ERROR;
- em2820_isocdbg ("dropping incomplete bottom field (%i missing bytes)",
+ em28xx_isocdbg ("dropping incomplete bottom field (%i missing bytes)",
dev->field_size-(*f)->fieldbytesused);
} else {
(*f)->state = F_DONE;
list_move_tail(&(*f)->frame, &dev->outqueue);
if (!list_empty(&dev->inqueue))
(*f) = list_entry(dev-> inqueue.next,
- struct em2820_frame_t,frame);
+ struct em28xx_frame_t,frame);
else
(*f) = NULL;
spin_unlock_irqrestore(&dev->queue_lock,*lock_flags);
}
if (!(*f)) {
- em2820_isocdbg ("new frame but no buffer is free");
+ em28xx_isocdbg ("new frame but no buffer is free");
return -1;
}
do_gettimeofday(&(*f)->buf.timestamp);
if ((*f)->state == F_GRABBING) {
if (!(*f)->top_field) {
(*f)->state = F_ERROR;
- em2820_isocdbg ("unexpected begin of bottom field; discarding it");
+ em28xx_isocdbg ("unexpected begin of bottom field; discarding it");
} else if ((*f)-> fieldbytesused < dev->field_size - 172) {
(*f)->state = F_ERROR;
- em2820_isocdbg ("dropping incomplete top field (%i missing bytes)",
+ em28xx_isocdbg ("dropping incomplete top field (%i missing bytes)",
dev->field_size-(*f)->fieldbytesused);
} else {
(*f)->top_field = 0;
return (0);
}
-static inline void em2820_isoc_video_copy(struct em2820 *dev,
- struct em2820_frame_t **f, unsigned char *buf, int len)
+static inline void em28xx_isoc_video_copy(struct em28xx *dev,
+ struct em28xx_frame_t **f, unsigned char *buf, int len)
{
void *fieldstart, *startwrite, *startread;
int linesdone, currlinedone, offset, lencopy,remain;
if(dev->frame_size != (*f)->buf.length){
- em2820_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length);
+ em28xx_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length);
return;
}
len =dev->field_size - (*f)->fieldbytesused;
if (buf[0] != 0x88 && buf[0] != 0x22) {
- em2820_isocdbg("frame is not complete\n");
+ em28xx_isocdbg("frame is not complete\n");
startread = buf;
len+=4;
} else
}
/*
- * em2820_isoIrq()
+ * em28xx_isoIrq()
* handles the incoming isoc urbs and fills the frames from our inqueue
*/
-void em2820_isocIrq(struct urb *urb, struct pt_regs *regs)
+void em28xx_isocIrq(struct urb *urb, struct pt_regs *regs)
{
- struct em2820 *dev = urb->context;
+ struct em28xx *dev = urb->context;
int i, status;
- struct em2820_frame_t **f;
+ struct em28xx_frame_t **f;
unsigned long lock_flags;
if (!dev)
return;
#ifdef ENABLE_DEBUG_ISOC_FRAMES
if (isoc_debug>1)
- em2820_isoc_dump(urb, regs);
+ em28xx_isoc_dump(urb, regs);
#endif
if (urb->status == -ENOENT)
dev->stream = STREAM_OFF;
if ((*f))
(*f)->state = F_QUEUED;
- em2820_isocdbg("stream interrupted");
+ em28xx_isocdbg("stream interrupted");
wake_up_interruptible(&dev->wait_stream);
}
if (dev->stream == STREAM_ON && !list_empty(&dev->inqueue)) {
if (!(*f))
(*f) = list_entry(dev->inqueue.next,
- struct em2820_frame_t, frame);
+ struct em28xx_frame_t, frame);
for (i = 0; i < urb->number_of_packets; i++) {
unsigned char *buf = urb->transfer_buffer +
int len = urb->iso_frame_desc[i].actual_length - 4;
if (urb->iso_frame_desc[i].status) {
- em2820_isocdbg("data error: [%d] len=%d, status=%d", i,
+ em28xx_isocdbg("data error: [%d] len=%d, status=%d", i,
urb->iso_frame_desc[i].actual_length,
urb->iso_frame_desc[i].status);
if (urb->iso_frame_desc[i].status != -EPROTO)
continue;
}
if (urb->iso_frame_desc[i].actual_length <= 0) {
- em2820_isocdbg("packet %d is empty",i);
+ em28xx_isocdbg("packet %d is empty",i);
continue;
}
if (urb->iso_frame_desc[i].actual_length >
dev->max_pkt_size) {
- em2820_isocdbg("packet bigger than packet size");
+ em28xx_isocdbg("packet bigger than packet size");
continue;
}
/*new frame */
if (buf[0] == 0x22 && buf[1] == 0x5a) {
- em2820_isocdbg("Video frame, length=%i!",len);
+ em28xx_isocdbg("Video frame, length=%i!",len);
- if (em2820_isoc_video(dev,f,&lock_flags,buf[2]))
+ if (em28xx_isoc_video(dev,f,&lock_flags,buf[2]))
break;
} else if (buf[0]==0x33 && buf[1]==0x95 && buf[2]==0x00) {
- em2820_isocdbg("VBI HEADER!!!");
+ em28xx_isocdbg("VBI HEADER!!!");
}
/* actual copying */
if ((*f)->state == F_GRABBING) {
- em2820_isoc_video_copy(dev,f,buf, len);
+ em28xx_isoc_video_copy(dev,f,buf, len);
}
}
}
urb->status = 0;
if ((status = usb_submit_urb(urb, GFP_ATOMIC))) {
- em2820_errdev("resubmit of urb failed (error=%i)\n", status);
+ em28xx_errdev("resubmit of urb failed (error=%i)\n", status);
dev->state |= DEV_MISCONFIGURED;
}
wake_up_interruptible(&dev->wait_frame);
}
/*
- * em2820_uninit_isoc()
- * deallocates the buffers and urbs allocated during em2820_init_iosc()
+ * em28xx_uninit_isoc()
+ * deallocates the buffers and urbs allocated during em28xx_init_iosc()
*/
-void em2820_uninit_isoc(struct em2820 *dev)
+void em28xx_uninit_isoc(struct em28xx *dev)
{
int i;
- for (i = 0; i < EM2820_NUM_BUFS; i++) {
+ for (i = 0; i < EM28XX_NUM_BUFS; i++) {
if (dev->urb[i]) {
usb_kill_urb(dev->urb[i]);
if (dev->transfer_buffer[i]){
- usb_buffer_free(dev->udev,(EM2820_NUM_PACKETS*dev->max_pkt_size),dev->transfer_buffer[i],dev->urb[i]->transfer_dma);
+ usb_buffer_free(dev->udev,(EM28XX_NUM_PACKETS*dev->max_pkt_size),dev->transfer_buffer[i],dev->urb[i]->transfer_dma);
}
usb_free_urb(dev->urb[i]);
}
dev->urb[i] = NULL;
dev->transfer_buffer[i] = NULL;
}
- em2820_capture_start(dev, 0);
+ em28xx_capture_start(dev, 0);
}
/*
- * em2820_init_isoc()
+ * em28xx_init_isoc()
* allocates transfer buffers and submits the urbs for isoc transfer
*/
-int em2820_init_isoc(struct em2820 *dev)
+int em28xx_init_isoc(struct em28xx *dev)
{
/* change interface to 3 which allowes the biggest packet sizes */
int i, errCode;
- const int sb_size = EM2820_NUM_PACKETS * dev->max_pkt_size;
+ const int sb_size = EM28XX_NUM_PACKETS * dev->max_pkt_size;
/* reset streaming vars */
dev->frame_current = NULL;
dev->frame_count = 0;
/* allocate urbs */
- for (i = 0; i < EM2820_NUM_BUFS; i++) {
+ for (i = 0; i < EM28XX_NUM_BUFS; i++) {
struct urb *urb;
int j, k;
/* allocate transfer buffer */
- urb = usb_alloc_urb(EM2820_NUM_PACKETS, GFP_KERNEL);
+ urb = usb_alloc_urb(EM28XX_NUM_PACKETS, GFP_KERNEL);
if (!urb){
- em2820_errdev("cannot alloc urb %i\n", i);
- em2820_uninit_isoc(dev);
+ em28xx_errdev("cannot alloc urb %i\n", i);
+ em28xx_uninit_isoc(dev);
return -ENOMEM;
}
dev->transfer_buffer[i] = usb_buffer_alloc(dev->udev, sb_size, GFP_KERNEL,&urb->transfer_dma);
if (!dev->transfer_buffer[i]) {
- em2820_errdev
+ em28xx_errdev
("unable to allocate %i bytes for transfer buffer %i\n",
sb_size, i);
- em2820_uninit_isoc(dev);
+ em28xx_uninit_isoc(dev);
return -ENOMEM;
}
memset(dev->transfer_buffer[i], 0, sb_size);
urb->transfer_flags = URB_ISO_ASAP;
urb->interval = 1;
urb->transfer_buffer = dev->transfer_buffer[i];
- urb->complete = em2820_isocIrq;
- urb->number_of_packets = EM2820_NUM_PACKETS;
+ urb->complete = em28xx_isocIrq;
+ urb->number_of_packets = EM28XX_NUM_PACKETS;
urb->transfer_buffer_length = sb_size;
- for (j = k = 0; j < EM2820_NUM_PACKETS;
+ for (j = k = 0; j < EM28XX_NUM_PACKETS;
j++, k += dev->max_pkt_size) {
urb->iso_frame_desc[j].offset = k;
urb->iso_frame_desc[j].length =
}
/* submit urbs */
- for (i = 0; i < EM2820_NUM_BUFS; i++) {
+ for (i = 0; i < EM28XX_NUM_BUFS; i++) {
errCode = usb_submit_urb(dev->urb[i], GFP_KERNEL);
if (errCode) {
- em2820_errdev("submit of urb %i failed (error=%i)\n", i,
+ em28xx_errdev("submit of urb %i failed (error=%i)\n", i,
errCode);
- em2820_uninit_isoc(dev);
+ em28xx_uninit_isoc(dev);
return errCode;
}
}
return 0;
}
-int em2820_set_alternate(struct em2820 *dev)
+int em28xx_set_alternate(struct em28xx *dev)
{
int errCode, prev_alt = dev->alt;
dev->alt = alt;
if (dev->alt == 0) {
int i;
if(dev->is_em2800){ /* always use the max packet size for em2800 based devices */
- for(i=0;i< EM2820_MAX_ALT; i++)
+ for(i=0;i< EM28XX_MAX_ALT; i++)
if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->alt])
dev->alt=i;
}else{
unsigned int min_pkt_size = dev->field_size / 137; /* FIXME: empiric magic number */
- em2820_coredbg("minimum isoc packet size: %u", min_pkt_size);
+ em28xx_coredbg("minimum isoc packet size: %u", min_pkt_size);
dev->alt = 7;
- for (i = 1; i < EM2820_MAX_ALT; i += 2) /* FIXME: skip even alternate: why do they not work? */
+ for (i = 1; i < EM28XX_MAX_ALT; i += 2) /* FIXME: skip even alternate: why do they not work? */
if (dev->alt_max_pkt_size[i] >= min_pkt_size) {
dev->alt = i;
break;
if (dev->alt != prev_alt) {
dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt];
- em2820_coredbg("setting alternate %d with wMaxPacketSize=%u", dev->alt,
+ em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u", dev->alt,
dev->max_pkt_size);
errCode = usb_set_interface(dev->udev, 0, dev->alt);
if (errCode < 0) {
- em2820_errdev
+ em28xx_errdev
("cannot change alternate number to %d (error=%i)\n",
dev->alt, errCode);
return errCode;
* em2800_i2c_send_max4()
* send up to 4 bytes to the i2c device
*/
-static int em2800_i2c_send_max4(struct em2820 *dev, unsigned char addr,
+static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
char *buf, int len)
{
int ret;
if (len > 3)
b2[0] = buf[3];
- ret = dev->em2820_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
+ ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
if (ret != 2 + len) {
- em2820_warn("writting to i2c device failed (error=%i)\n", ret);
+ em28xx_warn("writting to i2c device failed (error=%i)\n", ret);
return -EIO;
}
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
write_timeout -= 5) {
- ret = dev->em2820_read_reg(dev, 0x05);
+ ret = dev->em28xx_read_reg(dev, 0x05);
if (ret == 0x80 + len - 1)
return len;
mdelay(5);
}
- em2820_warn("i2c write timed out\n");
+ em28xx_warn("i2c write timed out\n");
return -EIO;
}
int wrcount = 0;
int count;
int maxLen = 4;
- struct em2820 *dev = (struct em2820 *)data;
+ struct em28xx *dev = (struct em28xx *)data;
while (len > 0) {
count = (len > maxLen) ? maxLen : len;
ret = em2800_i2c_send_max4(dev, addr, bufPtr, count);
* em2800_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
*/
-static int em2800_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
+static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
{
char msg;
int ret;
int write_timeout;
msg = addr;
- ret = dev->em2820_write_regs(dev, 0x04, &msg, 1);
+ ret = dev->em28xx_write_regs(dev, 0x04, &msg, 1);
if (ret < 0) {
- em2820_warn("setting i2c device address failed (error=%i)\n",
+ em28xx_warn("setting i2c device address failed (error=%i)\n",
ret);
return ret;
}
msg = 0x84;
- ret = dev->em2820_write_regs(dev, 0x05, &msg, 1);
+ ret = dev->em28xx_write_regs(dev, 0x05, &msg, 1);
if (ret < 0) {
- em2820_warn("preparing i2c read failed (error=%i)\n", ret);
+ em28xx_warn("preparing i2c read failed (error=%i)\n", ret);
return ret;
}
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
write_timeout -= 5) {
- unsigned msg = dev->em2820_read_reg(dev, 0x5);
+ unsigned msg = dev->em28xx_read_reg(dev, 0x5);
if (msg == 0x94)
return -ENODEV;
else if (msg == 0x84)
* em2800_i2c_recv_bytes()
* read from the i2c device
*/
-static int em2800_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
+static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
char *buf, int len)
{
int ret;
/* check for the device and set i2c read address */
ret = em2800_i2c_check_for_device(dev, addr);
if (ret) {
- em2820_warn
+ em28xx_warn
("preparing read at i2c address 0x%x failed (error=%i)\n",
addr, ret);
return ret;
}
- ret = dev->em2820_read_reg_req_len(dev, 0x0, 0x3, buf, len);
+ ret = dev->em28xx_read_reg_req_len(dev, 0x0, 0x3, buf, len);
if (ret < 0) {
- em2820_warn("reading from i2c device at 0x%x failed (error=%i)",
+ em28xx_warn("reading from i2c device at 0x%x failed (error=%i)",
addr, ret);
return ret;
}
}
/*
- * em2820_i2c_send_bytes()
+ * em28xx_i2c_send_bytes()
* untested for more than 4 bytes
*/
-static int em2820_i2c_send_bytes(void *data, unsigned char addr, char *buf,
+static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf,
short len, int stop)
{
int wrcount = 0;
- struct em2820 *dev = (struct em2820 *)data;
+ struct em28xx *dev = (struct em28xx *)data;
- wrcount = dev->em2820_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
+ wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
return wrcount;
}
/*
- * em2820_i2c_recv_bytes()
+ * em28xx_i2c_recv_bytes()
* read a byte from the i2c device
*/
-static int em2820_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
+static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
char *buf, int len)
{
int ret;
- ret = dev->em2820_read_reg_req_len(dev, 2, addr, buf, len);
+ ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
if (ret < 0) {
- em2820_warn("reading i2c device failed (error=%i)\n", ret);
+ em28xx_warn("reading i2c device failed (error=%i)\n", ret);
return ret;
}
- if (dev->em2820_read_reg(dev, 0x5) != 0)
+ if (dev->em28xx_read_reg(dev, 0x5) != 0)
return -ENODEV;
return ret;
}
/*
- * em2820_i2c_check_for_device()
+ * em28xx_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
*/
-static int em2820_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
+static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
{
char msg;
int ret;
msg = addr;
- ret = dev->em2820_read_reg_req(dev, 2, addr);
+ ret = dev->em28xx_read_reg_req(dev, 2, addr);
if (ret < 0) {
- em2820_warn("reading from i2c device failed (error=%i)\n", ret);
+ em28xx_warn("reading from i2c device failed (error=%i)\n", ret);
return ret;
}
- if (dev->em2820_read_reg(dev, 0x5) != 0)
+ if (dev->em28xx_read_reg(dev, 0x5) != 0)
return -ENODEV;
return 0;
}
/*
- * em2820_i2c_xfer()
+ * em28xx_i2c_xfer()
* the main i2c transfer function
*/
-static int em2820_i2c_xfer(struct i2c_adapter *i2c_adap,
+static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
- struct em2820 *dev = i2c_adap->algo_data;
+ struct em28xx *dev = i2c_adap->algo_data;
int addr, rc, i, byte;
if (num <= 0)
if (dev->is_em2800)
rc = em2800_i2c_check_for_device(dev, addr);
else
- rc = em2820_i2c_check_for_device(dev, addr);
+ rc = em28xx_i2c_check_for_device(dev, addr);
if (rc < 0) {
dprintk2(2," no device\n");
return rc;
msgs[i].buf,
msgs[i].len);
else
- rc = em2820_i2c_recv_bytes(dev, addr,
+ rc = em28xx_i2c_recv_bytes(dev, addr,
msgs[i].buf,
msgs[i].len);
if (i2c_debug>=2) {
msgs[i].buf,
msgs[i].len);
else
- rc = em2820_i2c_send_bytes(dev, addr,
+ rc = em28xx_i2c_send_bytes(dev, addr,
msgs[i].buf,
msgs[i].len,
i == num - 1);
return rc;
}
-static int em2820_i2c_eeprom(struct em2820 *dev, unsigned char *eedata, int len)
+static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
{
unsigned char buf, *p = eedata;
- struct em2820_eeprom *em_eeprom = (void *)eedata;
+ struct em28xx_eeprom *em_eeprom = (void *)eedata;
int i, err, size = len, block;
dev->i2c_client.addr = 0xa0 >> 1;
}
#endif
-static int em2820_set_tuner(int check_eeprom, struct i2c_client *client)
+static int em28xx_set_tuner(int check_eeprom, struct i2c_client *client)
{
- struct em2820 *dev = client->adapter->algo_data;
+ struct em28xx *dev = client->adapter->algo_data;
struct tuner_setup tun_setup;
if (dev->has_tuner) {
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
- em2820_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+ em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
}
return (0);
*/
static int attach_inform(struct i2c_client *client)
{
- struct em2820 *dev = client->adapter->algo_data;
+ struct em28xx *dev = client->adapter->algo_data;
switch (client->addr << 1) {
case 0x86:
- em2820_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf);
+ em28xx_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf);
break;
case 0x42:
dprintk1(1,"attach_inform: saa7114 detected.\n");
{
struct IR_i2c *ir = i2c_get_clientdata(client);
dprintk1(1,"attach_inform: IR detected (%s).\n",ir->phys);
- em2820_set_ir(dev,ir);
+ em28xx_set_ir(dev,ir);
break;
}
case 0x80:
default:
dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1);
dev->tuner_addr = client->addr;
- em2820_set_tuner(-1, client);
+ em28xx_set_tuner(-1, client);
}
return 0;
}
-static struct i2c_algorithm em2820_algo = {
- .master_xfer = em2820_i2c_xfer,
+static struct i2c_algorithm em28xx_algo = {
+ .master_xfer = em28xx_i2c_xfer,
.algo_control = algo_control,
.functionality = functionality,
};
-static struct i2c_adapter em2820_adap_template = {
+static struct i2c_adapter em28xx_adap_template = {
#ifdef I2C_PEC
.owner = THIS_MODULE,
#else
#ifdef I2C_CLASS_TV_ANALOG
.class = I2C_CLASS_TV_ANALOG,
#endif
- .name = "em2820",
- .id = I2C_HW_B_EM2820,
- .algo = &em2820_algo,
+ .name = "em28xx",
+ .id = I2C_HW_B_EM28XX,
+ .algo = &em28xx_algo,
.client_register = attach_inform,
};
-static struct i2c_client em2820_client_template = {
- .name = "em2820 internal",
+static struct i2c_client em28xx_client_template = {
+ .name = "em28xx internal",
.flags = I2C_CLIENT_ALLOW_USE,
};
}
/*
- * em2820_i2c_call_clients()
+ * em28xx_i2c_call_clients()
* send commands to all attached i2c devices
*/
-void em2820_i2c_call_clients(struct em2820 *dev, unsigned int cmd, void *arg)
+void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg)
{
BUG_ON(NULL == dev->i2c_adap.algo_data);
i2c_clients_command(&dev->i2c_adap, cmd, arg);
}
/*
- * em2820_i2c_register()
+ * em28xx_i2c_register()
* register i2c bus
*/
-int em2820_i2c_register(struct em2820 *dev)
+int em28xx_i2c_register(struct em28xx *dev)
{
- BUG_ON(!dev->em2820_write_regs || !dev->em2820_read_reg);
- BUG_ON(!dev->em2820_write_regs_req || !dev->em2820_read_reg_req);
- dev->i2c_adap = em2820_adap_template;
+ BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
+ BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
+ dev->i2c_adap = em28xx_adap_template;
dev->i2c_adap.dev.parent = &dev->udev->dev;
strcpy(dev->i2c_adap.name, dev->name);
dev->i2c_adap.algo_data = dev;
i2c_add_adapter(&dev->i2c_adap);
- dev->i2c_client = em2820_client_template;
+ dev->i2c_client = em28xx_client_template;
dev->i2c_client.adapter = &dev->i2c_adap;
- em2820_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
+ em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
if (i2c_scan)
do_i2c_scan(dev->name, &dev->i2c_client);
}
/*
- * em2820_i2c_unregister()
+ * em28xx_i2c_unregister()
* unregister i2c_bus
*/
-int em2820_i2c_unregister(struct em2820 *dev)
+int em28xx_i2c_unregister(struct em28xx *dev)
{
i2c_del_adapter(&dev->i2c_adap);
return 0;
}
/* ----------------------------------------------------------------------- */
-void em2820_set_ir(struct em2820 * dev,struct IR_i2c *ir)
+void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir)
{
if (disable_ir) {
ir->get_key=NULL;
case (EM2820_BOARD_TERRATEC_CINERGY_250):
ir->ir_codes = ir_codes_em_terratec;
ir->get_key = get_key_terratec;
- snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM2820 Terratec)");
+ snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Terratec)");
break;
case (EM2820_BOARD_PINNACLE_USB_2):
break;
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/video_decoder.h>
+#include <linux/utsname.h>
#include "em28xx.h"
#include <media/tuner.h>
#define DRIVER_NAME "em28xx"
#define DRIVER_DESC "Empia em28xx based USB video device driver"
-#define EM2820_VERSION_CODE KERNEL_VERSION(0, 0, 1)
+#define EM28XX_VERSION_CODE KERNEL_VERSION(0, 0, 1)
-#define em2820_videodbg(fmt, arg...) do {\
+#define em28xx_videodbg(fmt, arg...) do {\
if (video_debug) \
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __FUNCTION__ , ##arg); } while (0)
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-static LIST_HEAD(em2820_devlist);
+static LIST_HEAD(em28xx_devlist);
-static unsigned int card[] = {[0 ... (EM2820_MAXBOARDS - 1)] = UNSET };
+static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card,"card type");
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
/* supported tv norms */
-static struct em2820_tvnorm tvnorms[] = {
+static struct em28xx_tvnorm tvnorms[] = {
{
.name = "PAL",
.id = V4L2_STD_PAL,
#define TVNORMS ARRAY_SIZE(tvnorms)
/* supported controls */
-static struct v4l2_queryctrl em2820_qctrl[] = {
+static struct v4l2_queryctrl em28xx_qctrl[] = {
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
}
};
-static struct usb_driver em2820_usb_driver;
+static struct usb_driver em28xx_usb_driver;
-static DECLARE_MUTEX(em2820_sysfs_lock);
-static DECLARE_RWSEM(em2820_disconnect);
+static DECLARE_MUTEX(em28xx_sysfs_lock);
+static DECLARE_RWSEM(em28xx_disconnect);
/********************* v4l2 interface ******************************************/
}
/*
- * em2820_config()
+ * em28xx_config()
* inits registers with sane defaults
*/
-static int em2820_config(struct em2820 *dev)
+static int em28xx_config(struct em28xx *dev)
{
/* Sets I2C speed to 100 KHz */
- em2820_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+ em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
/* enable vbi capturing */
- em2820_audio_usb_mute(dev, 1);
+ em28xx_audio_usb_mute(dev, 1);
dev->mute = 1; /* maybe not the right place... */
dev->volume = 0x1f;
- em2820_audio_analog_set(dev);
- em2820_audio_analog_setup(dev);
- em2820_outfmt_set_yuv422(dev);
- em2820_colorlevels_set_default(dev);
- em2820_compression_disable(dev);
+ em28xx_audio_analog_set(dev);
+ em28xx_audio_analog_setup(dev);
+ em28xx_outfmt_set_yuv422(dev);
+ em28xx_colorlevels_set_default(dev);
+ em28xx_compression_disable(dev);
return 0;
}
/*
- * em2820_config_i2c()
+ * em28xx_config_i2c()
* configure i2c attached devices
*/
-void em2820_config_i2c(struct em2820 *dev)
+void em28xx_config_i2c(struct em28xx *dev)
{
struct v4l2_frequency f;
- struct video_decoder_init em2820_vdi = {.data = NULL };
+ struct video_decoder_init em28xx_vdi = {.data = NULL };
/* configure decoder */
if(dev->model == EM2820_BOARD_MSI_VOX_USB_2){
- em2820_vdi.data=saa7114_i2c_init;
- em2820_vdi.len=sizeof(saa7114_i2c_init);
+ em28xx_vdi.data=saa7114_i2c_init;
+ em28xx_vdi.len=sizeof(saa7114_i2c_init);
}
- em2820_i2c_call_clients(dev, DECODER_INIT, &em2820_vdi);
- em2820_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input);
-/* em2820_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */
-/* em2820_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */
-/* em2820_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */
-/* em2820_i2c_call_clients(dev,DECODER_DUMP, NULL); */
+ em28xx_i2c_call_clients(dev, DECODER_INIT, &em28xx_vdi);
+ em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input);
+/* em28xx_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */
+/* em28xx_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */
+/* em28xx_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */
+/* em28xx_i2c_call_clients(dev,DECODER_DUMP, NULL); */
/* configure tuner */
f.tuner = 0;
f.type = V4L2_TUNER_ANALOG_TV;
f.frequency = 9076; /* FIXME:remove magic number */
dev->ctl_freq = f.frequency;
- em2820_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+ em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
/* configure tda9887 */
-/* em2820_i2c_call_clients(dev,VIDIOC_S_STD,&dev->tvnorm->id); */
+/* em28xx_i2c_call_clients(dev,VIDIOC_S_STD,&dev->tvnorm->id); */
}
/*
- * em2820_empty_framequeues()
+ * em28xx_empty_framequeues()
* prepare queues for incoming and outgoing frames
*/
-static void em2820_empty_framequeues(struct em2820 *dev)
+static void em28xx_empty_framequeues(struct em28xx *dev)
{
u32 i;
INIT_LIST_HEAD(&dev->inqueue);
INIT_LIST_HEAD(&dev->outqueue);
- for (i = 0; i < EM2820_NUM_FRAMES; i++) {
+ for (i = 0; i < EM28XX_NUM_FRAMES; i++) {
dev->frame[i].state = F_UNUSED;
dev->frame[i].buf.bytesused = 0;
}
}
/*
- * em2820_v4l2_open()
+ * em28xx_v4l2_open()
* inits the device and starts isoc transfer
*/
-static int em2820_v4l2_open(struct inode *inode, struct file *filp)
+static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
{
int minor = iminor(inode);
int errCode = 0;
- struct em2820 *h,*dev = NULL;
+ struct em28xx *h,*dev = NULL;
struct list_head *list;
- list_for_each(list,&em2820_devlist) {
- h = list_entry(list, struct em2820, devlist);
+ list_for_each(list,&em28xx_devlist) {
+ h = list_entry(list, struct em28xx, devlist);
if (h->vdev->minor == minor) {
dev = h;
}
filp->private_data=dev;
- em2820_videodbg("users=%d", dev->users);
+ em28xx_videodbg("users=%d", dev->users);
- if (!down_read_trylock(&em2820_disconnect))
+ if (!down_read_trylock(&em28xx_disconnect))
return -ERESTARTSYS;
if (dev->users) {
- em2820_warn("this driver can be opened only once\n");
- up_read(&em2820_disconnect);
+ em28xx_warn("this driver can be opened only once\n");
+ up_read(&em28xx_disconnect);
return -EBUSY;
}
down(&dev->lock);
- em2820_set_alternate(dev);
+ em28xx_set_alternate(dev);
dev->width = norm_maxw(dev);
dev->height = norm_maxh(dev);
dev->hscale = 0;
dev->vscale = 0;
- em2820_capture_start(dev, 1);
- em2820_resolution_set(dev);
+ em28xx_capture_start(dev, 1);
+ em28xx_resolution_set(dev);
/* start the transfer */
- errCode = em2820_init_isoc(dev);
+ errCode = em28xx_init_isoc(dev);
if (errCode)
goto err;
dev->num_frames = 0;
/* prepare queues */
- em2820_empty_framequeues(dev);
+ em28xx_empty_framequeues(dev);
dev->state |= DEV_INITIALIZED;
err:
up(&dev->lock);
- up_read(&em2820_disconnect);
+ up_read(&em28xx_disconnect);
return errCode;
}
/*
- * em2820_realease_resources()
+ * em28xx_realease_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconected or at module unload
*/
-static void em2820_release_resources(struct em2820 *dev)
+static void em28xx_release_resources(struct em28xx *dev)
{
- down(&em2820_sysfs_lock);
+ down(&em28xx_sysfs_lock);
- em2820_info("V4L2 device /dev/video%d deregistered\n",
+ em28xx_info("V4L2 device /dev/video%d deregistered\n",
dev->vdev->minor);
list_del(&dev->devlist);
video_unregister_device(dev->vdev);
/* video_unregister_device(dev->vbi_dev); */
- em2820_i2c_unregister(dev);
+ em28xx_i2c_unregister(dev);
usb_put_dev(dev->udev);
- up(&em2820_sysfs_lock);
+ up(&em28xx_sysfs_lock);
}
/*
- * em2820_v4l2_close()
+ * em28xx_v4l2_close()
* stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls
*/
-static int em2820_v4l2_close(struct inode *inode, struct file *filp)
+static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
{
int errCode;
- struct em2820 *dev=filp->private_data;
+ struct em28xx *dev=filp->private_data;
- em2820_videodbg("users=%d", dev->users);
+ em28xx_videodbg("users=%d", dev->users);
down(&dev->lock);
- em2820_uninit_isoc(dev);
+ em28xx_uninit_isoc(dev);
- em2820_release_buffers(dev);
+ em28xx_release_buffers(dev);
/* the device is already disconnect, free the remaining resources */
if (dev->state & DEV_DISCONNECTED) {
- em2820_release_resources(dev);
+ em28xx_release_resources(dev);
up(&dev->lock);
kfree(dev);
return 0;
/* set alternate 0 */
dev->alt = 0;
- em2820_videodbg("setting alternate 0");
+ em28xx_videodbg("setting alternate 0");
errCode = usb_set_interface(dev->udev, 0, 0);
if (errCode < 0) {
- em2820_errdev ("cannot change alternate number to 0 (error=%i)\n",
+ em28xx_errdev ("cannot change alternate number to 0 (error=%i)\n",
errCode);
}
}
/*
- * em2820_v4l2_read()
+ * em28xx_v4l2_read()
* will allocate buffers when called for the first time
*/
static ssize_t
-em2820_v4l2_read(struct file *filp, char __user * buf, size_t count,
+em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count,
loff_t * f_pos)
{
- struct em2820_frame_t *f, *i;
+ struct em28xx_frame_t *f, *i;
unsigned long lock_flags;
int ret = 0;
- struct em2820 *dev = filp->private_data;
+ struct em28xx *dev = filp->private_data;
if (down_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
- em2820_videodbg("device not present");
+ em28xx_videodbg("device not present");
up(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
- em2820_videodbg("device misconfigured; close and open it again");
+ em28xx_videodbg("device misconfigured; close and open it again");
up(&dev->fileop_lock);
return -EIO;
}
if (dev->io == IO_MMAP) {
- em2820_videodbg ("IO method is set to mmap; close and open"
+ em28xx_videodbg ("IO method is set to mmap; close and open"
" the device again to choose the read method");
up(&dev->fileop_lock);
return -EINVAL;
}
if (dev->io == IO_NONE) {
- if (!em2820_request_buffers(dev, EM2820_NUM_READ_FRAMES)) {
- em2820_errdev("read failed, not enough memory\n");
+ if (!em28xx_request_buffers(dev, EM28XX_NUM_READ_FRAMES)) {
+ em28xx_errdev("read failed, not enough memory\n");
up(&dev->fileop_lock);
return -ENOMEM;
}
dev->io = IO_READ;
dev->stream = STREAM_ON;
- em2820_queue_unusedframes(dev);
+ em28xx_queue_unusedframes(dev);
}
if (!count) {
}
}
- f = list_entry(dev->outqueue.prev, struct em2820_frame_t, frame);
+ f = list_entry(dev->outqueue.prev, struct em28xx_frame_t, frame);
spin_lock_irqsave(&dev->queue_lock, lock_flags);
list_for_each_entry(i, &dev->outqueue, frame)
INIT_LIST_HEAD(&dev->outqueue);
spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
- em2820_queue_unusedframes(dev);
+ em28xx_queue_unusedframes(dev);
if (count > f->buf.length)
count = f->buf.length;
}
/*
- * em2820_v4l2_poll()
+ * em28xx_v4l2_poll()
* will allocate buffers when called for the first time
*/
-static unsigned int em2820_v4l2_poll(struct file *filp, poll_table * wait)
+static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait)
{
unsigned int mask = 0;
- struct em2820 *dev = filp->private_data;
+ struct em28xx *dev = filp->private_data;
if (down_interruptible(&dev->fileop_lock))
return POLLERR;
if (dev->state & DEV_DISCONNECTED) {
- em2820_videodbg("device not present");
+ em28xx_videodbg("device not present");
} else if (dev->state & DEV_MISCONFIGURED) {
- em2820_videodbg("device is misconfigured; close and open it again");
+ em28xx_videodbg("device is misconfigured; close and open it again");
} else {
if (dev->io == IO_NONE) {
- if (!em2820_request_buffers
- (dev, EM2820_NUM_READ_FRAMES)) {
- em2820_warn
+ if (!em28xx_request_buffers
+ (dev, EM28XX_NUM_READ_FRAMES)) {
+ em28xx_warn
("poll() failed, not enough memory\n");
} else {
dev->io = IO_READ;
}
if (dev->io == IO_READ) {
- em2820_queue_unusedframes(dev);
+ em28xx_queue_unusedframes(dev);
poll_wait(filp, &dev->wait_frame, wait);
if (!list_empty(&dev->outqueue))
}
/*
- * em2820_vm_open()
+ * em28xx_vm_open()
*/
-static void em2820_vm_open(struct vm_area_struct *vma)
+static void em28xx_vm_open(struct vm_area_struct *vma)
{
- struct em2820_frame_t *f = vma->vm_private_data;
+ struct em28xx_frame_t *f = vma->vm_private_data;
f->vma_use_count++;
}
/*
- * em2820_vm_close()
+ * em28xx_vm_close()
*/
-static void em2820_vm_close(struct vm_area_struct *vma)
+static void em28xx_vm_close(struct vm_area_struct *vma)
{
/* NOTE: buffers are not freed here */
- struct em2820_frame_t *f = vma->vm_private_data;
+ struct em28xx_frame_t *f = vma->vm_private_data;
f->vma_use_count--;
}
-static struct vm_operations_struct em2820_vm_ops = {
- .open = em2820_vm_open,
- .close = em2820_vm_close,
+static struct vm_operations_struct em28xx_vm_ops = {
+ .open = em28xx_vm_open,
+ .close = em28xx_vm_close,
};
/*
- * em2820_v4l2_mmap()
+ * em28xx_v4l2_mmap()
*/
-static int em2820_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
+static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
{
unsigned long size = vma->vm_end - vma->vm_start,
start = vma->vm_start, pos, page;
u32 i;
- struct em2820 *dev = filp->private_data;
+ struct em28xx *dev = filp->private_data;
if (down_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
- em2820_videodbg("mmap: device not present");
+ em28xx_videodbg("mmap: device not present");
up(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
- em2820_videodbg ("mmap: Device is misconfigured; close and "
+ em28xx_videodbg ("mmap: Device is misconfigured; close and "
"open it again");
up(&dev->fileop_lock);
return -EIO;
break;
}
if (i == dev->num_frames) {
- em2820_videodbg("mmap: user supplied mapping address is out of range");
+ em28xx_videodbg("mmap: user supplied mapping address is out of range");
up(&dev->fileop_lock);
return -EINVAL;
}
page = vmalloc_to_pfn((void *)pos);
if (remap_pfn_range(vma, start, page, PAGE_SIZE,
vma->vm_page_prot)) {
- em2820_videodbg("mmap: rename page map failed");
+ em28xx_videodbg("mmap: rename page map failed");
up(&dev->fileop_lock);
return -EAGAIN;
}
size -= PAGE_SIZE;
}
- vma->vm_ops = &em2820_vm_ops;
+ vma->vm_ops = &em28xx_vm_ops;
vma->vm_private_data = &dev->frame[i];
- em2820_vm_open(vma);
+ em28xx_vm_open(vma);
up(&dev->fileop_lock);
return 0;
}
/*
- * em2820_get_ctrl()
+ * em28xx_get_ctrl()
* return the current saturation, brightness or contrast, mute state
*/
-static int em2820_get_ctrl(struct em2820 *dev, struct v4l2_control *ctrl)
+static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl)
{
s32 tmp;
switch (ctrl->id) {
ctrl->value = dev->volume;
return 0;
case V4L2_CID_BRIGHTNESS:
- if ((tmp = em2820_brightness_get(dev)) < 0)
+ if ((tmp = em28xx_brightness_get(dev)) < 0)
return -EIO;
ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
return 0;
case V4L2_CID_CONTRAST:
- if ((ctrl->value = em2820_contrast_get(dev)) < 0)
+ if ((ctrl->value = em28xx_contrast_get(dev)) < 0)
return -EIO;
return 0;
case V4L2_CID_SATURATION:
- if ((ctrl->value = em2820_saturation_get(dev)) < 0)
+ if ((ctrl->value = em28xx_saturation_get(dev)) < 0)
return -EIO;
return 0;
case V4L2_CID_RED_BALANCE:
- if ((tmp = em2820_v_balance_get(dev)) < 0)
+ if ((tmp = em28xx_v_balance_get(dev)) < 0)
return -EIO;
ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
return 0;
case V4L2_CID_BLUE_BALANCE:
- if ((tmp = em2820_u_balance_get(dev)) < 0)
+ if ((tmp = em28xx_u_balance_get(dev)) < 0)
return -EIO;
ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
return 0;
case V4L2_CID_GAMMA:
- if ((ctrl->value = em2820_gamma_get(dev)) < 0)
+ if ((ctrl->value = em28xx_gamma_get(dev)) < 0)
return -EIO;
return 0;
default:
}
/*
- * em2820_set_ctrl()
+ * em28xx_set_ctrl()
* mute or set new saturation, brightness or contrast
*/
-static int em2820_set_ctrl(struct em2820 *dev, const struct v4l2_control *ctrl)
+static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl)
{
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value != dev->mute) {
dev->mute = ctrl->value;
- em2820_audio_usb_mute(dev, ctrl->value);
- return em2820_audio_analog_set(dev);
+ em28xx_audio_usb_mute(dev, ctrl->value);
+ return em28xx_audio_analog_set(dev);
}
return 0;
case V4L2_CID_AUDIO_VOLUME:
dev->volume = ctrl->value;
- return em2820_audio_analog_set(dev);
+ return em28xx_audio_analog_set(dev);
case V4L2_CID_BRIGHTNESS:
- return em2820_brightness_set(dev, ctrl->value);
+ return em28xx_brightness_set(dev, ctrl->value);
case V4L2_CID_CONTRAST:
- return em2820_contrast_set(dev, ctrl->value);
+ return em28xx_contrast_set(dev, ctrl->value);
case V4L2_CID_SATURATION:
- return em2820_saturation_set(dev, ctrl->value);
+ return em28xx_saturation_set(dev, ctrl->value);
case V4L2_CID_RED_BALANCE:
- return em2820_v_balance_set(dev, ctrl->value);
+ return em28xx_v_balance_set(dev, ctrl->value);
case V4L2_CID_BLUE_BALANCE:
- return em2820_u_balance_set(dev, ctrl->value);
+ return em28xx_u_balance_set(dev, ctrl->value);
case V4L2_CID_GAMMA:
- return em2820_gamma_set(dev, ctrl->value);
+ return em28xx_gamma_set(dev, ctrl->value);
default:
return -EINVAL;
}
}
/*
- * em2820_stream_interrupt()
+ * em28xx_stream_interrupt()
* stops streaming
*/
-static int em2820_stream_interrupt(struct em2820 *dev)
+static int em28xx_stream_interrupt(struct em28xx *dev)
{
int ret = 0;
ret = wait_event_timeout(dev->wait_stream,
(dev->stream == STREAM_OFF) ||
(dev->state & DEV_DISCONNECTED),
- EM2820_URB_TIMEOUT);
+ EM28XX_URB_TIMEOUT);
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
else if (ret) {
dev->state |= DEV_MISCONFIGURED;
- em2820_videodbg("device is misconfigured; close and "
+ em28xx_videodbg("device is misconfigured; close and "
"open /dev/video%d again", dev->vdev->minor);
return ret;
}
return 0;
}
-static int em2820_set_norm(struct em2820 *dev, int width, int height)
+static int em28xx_set_norm(struct em28xx *dev, int width, int height)
{
unsigned int hscale, vscale;
unsigned int maxh, maxw;
dev->hscale = hscale;
dev->vscale = vscale;
- em2820_resolution_set(dev);
+ em28xx_resolution_set(dev);
return 0;
}
-static void video_mux(struct em2820 *dev, int index)
+static void video_mux(struct em28xx *dev, int index)
{
int input, ainput;
input = INPUT(index)->vmux;
dev->ctl_input = index;
- em2820_i2c_call_clients(dev, DECODER_SET_INPUT, &input);
+ em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &input);
dev->ctl_ainput = INPUT(index)->amux;
switch (dev->ctl_ainput) {
case 0:
- ainput = EM2820_AUDIO_SRC_TUNER;
+ ainput = EM28XX_AUDIO_SRC_TUNER;
break;
default:
- ainput = EM2820_AUDIO_SRC_LINE;
+ ainput = EM28XX_AUDIO_SRC_LINE;
}
- em2820_audio_source(dev, ainput);
+ em28xx_audio_source(dev, ainput);
}
/*
- * em2820_v4l2_do_ioctl()
+ * em28xx_v4l2_do_ioctl()
* This function is _not_ called directly, but from
- * em2820_v4l2_ioctl. Userspace
+ * em28xx_v4l2_ioctl. Userspace
* copying is done already, arg is a kernel pointer.
*/
-static int em2820_do_ioctl(struct inode *inode, struct file *filp,
- struct em2820 *dev, unsigned int cmd, void *arg,
+static int em28xx_do_ioctl(struct inode *inode, struct file *filp,
+ struct em28xx *dev, unsigned int cmd, void *arg,
v4l2_kioctl driver_ioctl)
{
int ret;
down(&dev->lock);
dev->tvnorm = &tvnorms[i];
- em2820_set_norm(dev, dev->width, dev->height);
+ em28xx_set_norm(dev, dev->width, dev->height);
/*
dev->width=norm_maxw(dev);
dev->hscale=0;
dev->vscale=0;
- em2820_resolution_set(dev);
+ em28xx_resolution_set(dev);
*/
/*
- em2820_uninit_isoc(dev);
- em2820_set_alternate(dev);
- em2820_capture_start(dev, 1);
- em2820_resolution_set(dev);
- em2820_init_isoc(dev);
+ em28xx_uninit_isoc(dev);
+ em28xx_set_alternate(dev);
+ em28xx_capture_start(dev, 1);
+ em28xx_resolution_set(dev);
+ em28xx_init_isoc(dev);
*/
- em2820_i2c_call_clients(dev, DECODER_SET_NORM,
+ em28xx_i2c_call_clients(dev, DECODER_SET_NORM,
&tvnorms[i].mode);
- em2820_i2c_call_clients(dev, VIDIOC_S_STD,
+ em28xx_i2c_call_clients(dev, VIDIOC_S_STD,
&dev->tvnorm->id);
up(&dev->lock);
struct v4l2_input *i = arg;
unsigned int n;
static const char *iname[] = {
- [EM2820_VMUX_COMPOSITE1] = "Composite1",
- [EM2820_VMUX_COMPOSITE2] = "Composite2",
- [EM2820_VMUX_COMPOSITE3] = "Composite3",
- [EM2820_VMUX_COMPOSITE4] = "Composite4",
- [EM2820_VMUX_SVIDEO] = "S-Video",
- [EM2820_VMUX_TELEVISION] = "Television",
- [EM2820_VMUX_CABLE] = "Cable TV",
- [EM2820_VMUX_DVB] = "DVB",
- [EM2820_VMUX_DEBUG] = "for debug only",
+ [EM28XX_VMUX_COMPOSITE1] = "Composite1",
+ [EM28XX_VMUX_COMPOSITE2] = "Composite2",
+ [EM28XX_VMUX_COMPOSITE3] = "Composite3",
+ [EM28XX_VMUX_COMPOSITE4] = "Composite4",
+ [EM28XX_VMUX_SVIDEO] = "S-Video",
+ [EM28XX_VMUX_TELEVISION] = "Television",
+ [EM28XX_VMUX_CABLE] = "Cable TV",
+ [EM28XX_VMUX_DVB] = "DVB",
+ [EM28XX_VMUX_DEBUG] = "for debug only",
};
n = i->index;
- if (n >= MAX_EM2820_INPUT)
+ if (n >= MAX_EM28XX_INPUT)
return -EINVAL;
if (0 == INPUT(n)->type)
return -EINVAL;
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
strcpy(i->name, iname[INPUT(n)->type]);
- if ((EM2820_VMUX_TELEVISION == INPUT(n)->type) ||
- (EM2820_VMUX_CABLE == INPUT(n)->type))
+ if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) ||
+ (EM28XX_VMUX_CABLE == INPUT(n)->type))
i->type = V4L2_INPUT_TYPE_TUNER;
for (n = 0; n < ARRAY_SIZE(tvnorms); n++)
i->std |= tvnorms[n].id;
{
int *index = arg;
- if (*index >= MAX_EM2820_INPUT)
+ if (*index >= MAX_EM28XX_INPUT)
return -EINVAL;
if (0 == INPUT(*index)->type)
return -EINVAL;
{
struct v4l2_queryctrl *qc = arg;
u8 i, n;
- n = sizeof(em2820_qctrl) / sizeof(em2820_qctrl[0]);
+ n = sizeof(em28xx_qctrl) / sizeof(em28xx_qctrl[0]);
for (i = 0; i < n; i++)
- if (qc->id && qc->id == em2820_qctrl[i].id) {
- memcpy(qc, &(em2820_qctrl[i]),
+ if (qc->id && qc->id == em28xx_qctrl[i].id) {
+ memcpy(qc, &(em28xx_qctrl[i]),
sizeof(*qc));
return 0;
}
struct v4l2_control *ctrl = arg;
- return em2820_get_ctrl(dev, ctrl);
+ return em28xx_get_ctrl(dev, ctrl);
}
case VIDIOC_S_CTRL_OLD: /* ??? */
u8 i, n;
- n = sizeof(em2820_qctrl) / sizeof(em2820_qctrl[0]);
+ n = sizeof(em28xx_qctrl) / sizeof(em28xx_qctrl[0]);
for (i = 0; i < n; i++)
- if (ctrl->id == em2820_qctrl[i].id) {
+ if (ctrl->id == em28xx_qctrl[i].id) {
if (ctrl->value <
- em2820_qctrl[i].minimum
+ em28xx_qctrl[i].minimum
|| ctrl->value >
- em2820_qctrl[i].maximum)
+ em28xx_qctrl[i].maximum)
return -ERANGE;
- return em2820_set_ctrl(dev, ctrl);
+ return em28xx_set_ctrl(dev, ctrl);
}
return -EINVAL;
}
t->capability = V4L2_TUNER_CAP_NORM;
t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */
/* t->signal = 0xffff;*/
-/* em2820_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/
+/* em28xx_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/
/* No way to get signal strength? */
down(&dev->lock);
- em2820_i2c_call_clients(dev, DECODER_GET_STATUS,
+ em28xx_i2c_call_clients(dev, DECODER_GET_STATUS,
&status);
up(&dev->lock);
t->signal =
(status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
- em2820_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x", t->signal,
+ em28xx_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x", t->signal,
t->afc);
return 0;
}
/* t->signal = 0xffff; */
/* No way to get signal strength? */
down(&dev->lock);
- em2820_i2c_call_clients(dev, DECODER_GET_STATUS,
+ em28xx_i2c_call_clients(dev, DECODER_GET_STATUS,
&status);
up(&dev->lock);
t->signal =
(status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
- em2820_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n",
+ em28xx_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n",
t->signal, t->afc);
return 0;
}
down(&dev->lock);
dev->ctl_freq = f->frequency;
- em2820_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f);
+ em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f);
up(&dev->lock);
return 0;
}
dev->stream = STREAM_ON; /* FIXME: Start video capture here? */
- em2820_videodbg("VIDIOC_STREAMON: starting stream");
+ em28xx_videodbg("VIDIOC_STREAMON: starting stream");
return 0;
}
return -EINVAL;
if (dev->stream == STREAM_ON) {
- em2820_videodbg ("VIDIOC_STREAMOFF: interrupting stream");
- if ((ret = em2820_stream_interrupt(dev)))
+ em28xx_videodbg ("VIDIOC_STREAMOFF: interrupting stream");
+ if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}
- em2820_empty_framequeues(dev);
+ em28xx_empty_framequeues(dev);
return 0;
}
}
/*
- * em2820_v4l2_do_ioctl()
+ * em28xx_v4l2_do_ioctl()
* This function is _not_ called directly, but from
- * em2820_v4l2_ioctl. Userspace
+ * em28xx_v4l2_ioctl. Userspace
* copying is done already, arg is a kernel pointer.
*/
-static int em2820_video_do_ioctl(struct inode *inode, struct file *filp,
+static int em28xx_video_do_ioctl(struct inode *inode, struct file *filp,
unsigned int cmd, void *arg)
{
- struct em2820 *dev = filp->private_data;
+ struct em28xx *dev = filp->private_data;
if (!dev)
return -ENODEV;
if (video_debug > 1)
- em2820_print_ioctl(dev->name,cmd);
+ em28xx_print_ioctl(dev->name,cmd);
switch (cmd) {
struct v4l2_capability *cap = arg;
memset(cap, 0, sizeof(*cap));
- strlcpy(cap->driver, "em2820", sizeof(cap->driver));
- strlcpy(cap->card, em2820_boards[dev->model].name,
+ strlcpy(cap->driver, "em28xx", sizeof(cap->driver));
+ strlcpy(cap->card, em28xx_boards[dev->model].name,
sizeof(cap->card));
strlcpy(cap->bus_info, dev->udev->dev.bus_id,
sizeof(cap->bus_info));
- cap->version = EM2820_VERSION_CODE;
+ cap->version = EM28XX_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_AUDIO |
{
struct v4l2_format *format = arg;
- em2820_videodbg("VIDIOC_G_FMT: type=%s",
+ em28xx_videodbg("VIDIOC_G_FMT: type=%s",
format->type ==
V4L2_BUF_TYPE_VIDEO_CAPTURE ?
"V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type ==
format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
format->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
- em2820_videodbg("VIDIOC_G_FMT: %dx%d", dev->width,
+ em28xx_videodbg("VIDIOC_G_FMT: %dx%d", dev->width,
dev->height);
return 0;
}
/* int both_fields; */
- em2820_videodbg("%s: type=%s",
+ em28xx_videodbg("%s: type=%s",
cmd ==
VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
"VIDIOC_S_FMT",
if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- em2820_videodbg("%s: requested %dx%d",
+ em28xx_videodbg("%s: requested %dx%d",
cmd ==
VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
"VIDIOC_S_FMT", format->fmt.pix.width,
format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
format->fmt.pix.field = V4L2_FIELD_INTERLACED;
- em2820_videodbg("%s: returned %dx%d (%d, %d)",
+ em28xx_videodbg("%s: returned %dx%d (%d, %d)",
cmd ==
VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
"VIDIOC_S_FMT", format->fmt.pix.width,
for (i = 0; i < dev->num_frames; i++)
if (dev->frame[i].vma_use_count) {
- em2820_videodbg("VIDIOC_S_FMT failed. "
+ em28xx_videodbg("VIDIOC_S_FMT failed. "
"Unmap the buffers first.");
return -EINVAL;
}
/* stop io in case it is already in progress */
if (dev->stream == STREAM_ON) {
- em2820_videodbg("VIDIOC_SET_FMT: interupting stream");
- if ((ret = em2820_stream_interrupt(dev)))
+ em28xx_videodbg("VIDIOC_SET_FMT: interupting stream");
+ if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}
- em2820_release_buffers(dev);
+ em28xx_release_buffers(dev);
dev->io = IO_NONE;
/* set new image size */
dev->hscale = hscale;
dev->vscale = vscale;
/* dev->both_fileds = both_fileds; */
- em2820_uninit_isoc(dev);
- em2820_set_alternate(dev);
- em2820_capture_start(dev, 1);
- em2820_resolution_set(dev);
- em2820_init_isoc(dev);
+ em28xx_uninit_isoc(dev);
+ em28xx_set_alternate(dev);
+ em28xx_capture_start(dev, 1);
+ em28xx_resolution_set(dev);
+ em28xx_init_isoc(dev);
return 0;
}
return -EINVAL;
if (dev->io == IO_READ) {
- em2820_videodbg ("method is set to read;"
+ em28xx_videodbg ("method is set to read;"
" close and open the device again to"
" choose the mmap I/O method");
return -EINVAL;
for (i = 0; i < dev->num_frames; i++)
if (dev->frame[i].vma_use_count) {
- em2820_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped");
+ em28xx_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped");
return -EINVAL;
}
if (dev->stream == STREAM_ON) {
- em2820_videodbg("VIDIOC_REQBUFS: interrupting stream");
- if ((ret = em2820_stream_interrupt(dev)))
+ em28xx_videodbg("VIDIOC_REQBUFS: interrupting stream");
+ if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}
- em2820_empty_framequeues(dev);
+ em28xx_empty_framequeues(dev);
- em2820_release_buffers(dev);
+ em28xx_release_buffers(dev);
if (rb->count)
rb->count =
- em2820_request_buffers(dev, rb->count);
+ em28xx_request_buffers(dev, rb->count);
dev->frame_current = NULL;
- em2820_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i",
+ em28xx_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i",
rb->count);
dev->io = rb->count ? IO_MMAP : IO_NONE;
return 0;
case VIDIOC_DQBUF:
{
struct v4l2_buffer *b = arg;
- struct em2820_frame_t *f;
+ struct em28xx_frame_t *f;
unsigned long lock_flags;
int ret = 0;
spin_lock_irqsave(&dev->queue_lock, lock_flags);
f = list_entry(dev->outqueue.next,
- struct em2820_frame_t, frame);
+ struct em28xx_frame_t, frame);
list_del(dev->outqueue.next);
spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
return 0;
}
default:
- return em2820_do_ioctl(inode, filp, dev, cmd, arg,
- em2820_video_do_ioctl);
+ return em28xx_do_ioctl(inode, filp, dev, cmd, arg,
+ em28xx_video_do_ioctl);
}
return 0;
}
/*
- * em2820_v4l2_ioctl()
- * handle v4l2 ioctl the main action happens in em2820_v4l2_do_ioctl()
+ * em28xx_v4l2_ioctl()
+ * handle v4l2 ioctl the main action happens in em28xx_v4l2_do_ioctl()
*/
-static int em2820_v4l2_ioctl(struct inode *inode, struct file *filp,
+static int em28xx_v4l2_ioctl(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg)
{
int ret = 0;
- struct em2820 *dev = filp->private_data;
+ struct em28xx *dev = filp->private_data;
if (down_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
- em2820_errdev("v4l2 ioctl: device not present\n");
+ em28xx_errdev("v4l2 ioctl: device not present\n");
up(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
- em2820_errdev
+ em28xx_errdev
("v4l2 ioctl: device is misconfigured; close and open it again\n");
up(&dev->fileop_lock);
return -EIO;
}
- ret = video_usercopy(inode, filp, cmd, arg, em2820_video_do_ioctl);
+ ret = video_usercopy(inode, filp, cmd, arg, em28xx_video_do_ioctl);
up(&dev->fileop_lock);
return ret;
}
-static struct file_operations em2820_v4l_fops = {
+static struct file_operations em28xx_v4l_fops = {
.owner = THIS_MODULE,
- .open = em2820_v4l2_open,
- .release = em2820_v4l2_close,
- .ioctl = em2820_v4l2_ioctl,
- .read = em2820_v4l2_read,
- .poll = em2820_v4l2_poll,
- .mmap = em2820_v4l2_mmap,
+ .open = em28xx_v4l2_open,
+ .release = em28xx_v4l2_close,
+ .ioctl = em28xx_v4l2_ioctl,
+ .read = em28xx_v4l2_read,
+ .poll = em28xx_v4l2_poll,
+ .mmap = em28xx_v4l2_mmap,
.llseek = no_llseek,
};
/******************************** usb interface *****************************************/
/*
- * em2820_init_dev()
+ * em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
*/
-static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
+static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
int minor, int model)
{
- struct em2820 *dev = *devhandle;
+ struct em28xx *dev = *devhandle;
int retval = -ENOMEM;
int errCode, i;
unsigned int maxh, maxw;
init_MUTEX(&dev->lock);
init_waitqueue_head(&dev->open);
- dev->em2820_write_regs = em2820_write_regs;
- dev->em2820_read_reg = em2820_read_reg;
- dev->em2820_read_reg_req_len = em2820_read_reg_req_len;
- dev->em2820_write_regs_req = em2820_write_regs_req;
- dev->em2820_read_reg_req = em2820_read_reg_req;
- dev->is_em2800 = em2820_boards[model].is_em2800;
- dev->has_tuner = em2820_boards[model].has_tuner;
- dev->has_msp34xx = em2820_boards[model].has_msp34xx;
- dev->tda9887_conf = em2820_boards[model].tda9887_conf;
- dev->decoder = em2820_boards[model].decoder;
+ dev->em28xx_write_regs = em28xx_write_regs;
+ dev->em28xx_read_reg = em28xx_read_reg;
+ dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
+ dev->em28xx_write_regs_req = em28xx_write_regs_req;
+ dev->em28xx_read_reg_req = em28xx_read_reg_req;
+ dev->is_em2800 = em28xx_boards[model].is_em2800;
+ dev->has_tuner = em28xx_boards[model].has_tuner;
+ dev->has_msp34xx = em28xx_boards[model].has_msp34xx;
+ dev->tda9887_conf = em28xx_boards[model].tda9887_conf;
+ dev->decoder = em28xx_boards[model].decoder;
if (tuner >= 0)
dev->tuner_type = tuner;
else
- dev->tuner_type = em2820_boards[model].tuner_type;
+ dev->tuner_type = em28xx_boards[model].tuner_type;
- dev->video_inputs = em2820_boards[model].vchannels;
+ dev->video_inputs = em28xx_boards[model].vchannels;
for (i = 0; i < TVNORMS; i++)
- if (em2820_boards[model].norm == tvnorms[i].mode)
+ if (em28xx_boards[model].norm == tvnorms[i].mode)
break;
if (i == TVNORMS)
i = 0;
dev->tvnorm = &tvnorms[i]; /* set default norm */
- em2820_videodbg("tvnorm=%s\n", dev->tvnorm->name);
+ em28xx_videodbg("tvnorm=%s\n", dev->tvnorm->name);
maxw = norm_maxw(dev);
maxh = norm_maxh(dev);
/* set default image size */
dev->width = maxw;
dev->height = maxh;
- dev->interlaced = EM2820_INTERLACED_DEFAULT;
+ dev->interlaced = EM28XX_INTERLACED_DEFAULT;
dev->field_size = dev->width * dev->height;
dev->frame_size =
dev->interlaced ? dev->field_size << 1 : dev->field_size;
/* compute alternate max packet sizes */
uif = dev->udev->actconfig->interface[0];
dev->alt_max_pkt_size[0] = 0;
- for (i = 1; i <= EM2820_MAX_ALT && i < uif->num_altsetting ; i++) {
+ for (i = 1; i <= EM28XX_MAX_ALT && i < uif->num_altsetting ; i++) {
u16 tmp =
le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
wMaxPacketSize);
#ifdef CONFIG_MODULES
/* request some modules */
- if (dev->decoder == EM2820_SAA7113 || dev->decoder == EM2820_SAA7114)
+ if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
request_module("saa711x");
- if (dev->decoder == EM2820_TVP5150)
+ if (dev->decoder == EM28XX_TVP5150)
request_module("tvp5150");
if (dev->has_tuner)
request_module("tuner");
if (dev->tda9887_conf)
request_module("tda9887");
#endif
- errCode = em2820_config(dev);
+ errCode = em28xx_config(dev);
if (errCode) {
- em2820_errdev("error configuring device\n");
+ em28xx_errdev("error configuring device\n");
kfree(dev);
return -ENOMEM;
}
down(&dev->lock);
/* register i2c bus */
- em2820_i2c_register(dev);
+ em28xx_i2c_register(dev);
/* Do board specific init and eeprom reading */
- em2820_card_setup(dev);
+ em28xx_card_setup(dev);
/* configure the device */
- em2820_config_i2c(dev);
+ em28xx_config_i2c(dev);
up(&dev->lock);
- errCode = em2820_config(dev);
+ errCode = em28xx_config(dev);
#ifdef CONFIG_MODULES
if (dev->has_msp34xx)
/* allocate and fill v4l2 device struct */
dev->vdev = video_device_alloc();
if (NULL == dev->vdev) {
- em2820_errdev("cannot allocate video_device.\n");
+ em28xx_errdev("cannot allocate video_device.\n");
kfree(dev);
return -ENOMEM;
}
if (dev->has_tuner)
dev->vdev->type |= VID_TYPE_TUNER;
dev->vdev->hardware = 0;
- dev->vdev->fops = &em2820_v4l_fops;
+ dev->vdev->fops = &em28xx_v4l_fops;
dev->vdev->minor = -1;
dev->vdev->dev = &dev->udev->dev;
dev->vdev->release = video_device_release;
snprintf(dev->vdev->name, sizeof(dev->vdev->name), "%s",
- "em2820 video");
- list_add_tail(&dev->devlist,&em2820_devlist);
+ "em28xx video");
+ list_add_tail(&dev->devlist,&em28xx_devlist);
/* register v4l2 device */
down(&dev->lock);
if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1))) {
- em2820_errdev("unable to register video device (error=%i).\n",
+ em28xx_errdev("unable to register video device (error=%i).\n",
retval);
up(&dev->lock);
list_del(&dev->devlist);
}
if (dev->has_msp34xx) {
/* Send a reset to other chips via gpio */
- em2820_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
udelay(2500);
- em2820_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
udelay(2500);
}
up(&dev->lock);
- em2820_info("V4L2 device registered as /dev/video%d\n",
+ em28xx_info("V4L2 device registered as /dev/video%d\n",
dev->vdev->minor);
return 0;
}
/*
- * em2820_usb_probe()
+ * em28xx_usb_probe()
* checks for supported devices
*/
-static int em2820_usb_probe(struct usb_interface *interface,
+static int em28xx_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
const struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev;
- struct em2820 *dev = NULL;
+ struct em28xx *dev = NULL;
int retval = -ENODEV;
int model,i,nr,ifnum;
/* Don't register audio interfaces */
if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
- em2820_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n",
+ em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n",
udev->descriptor.idVendor,udev->descriptor.idProduct,
ifnum,
interface->altsetting[0].desc.bInterfaceClass);
return -ENODEV;
}
- em2820_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n",
+ em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n",
udev->descriptor.idVendor,udev->descriptor.idProduct,
ifnum,
interface->altsetting[0].desc.bInterfaceClass);
/* check if the the device has the iso in endpoint at the correct place */
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
USB_ENDPOINT_XFER_ISOC) {
- em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
+ em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
return -ENODEV;
}
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
- em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
+ em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
return -ENODEV;
}
model=id->driver_info;
nr=interface->minor;
- if (nr>EM2820_MAXBOARDS) {
- printk ("em2820: Supports only %i em28xx boards.\n",EM2820_MAXBOARDS);
+ if (nr>EM28XX_MAXBOARDS) {
+ printk ("em28xx: Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS);
return -ENOMEM;
}
/* allocate memory for our device state and initialize it */
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
- em2820_err(DRIVER_NAME ": out of memory!\n");
+ em28xx_err(DRIVER_NAME ": out of memory!\n");
return -ENOMEM;
}
memset(dev, 0, sizeof(*dev));
- snprintf(dev->name, 29, "em2820 #%d", nr);
+ snprintf(dev->name, 29, "em28xx #%d", nr);
- if ((card[nr]>=0)&&(card[nr]<em2820_bcount))
+ if ((card[nr]>=0)&&(card[nr]<em28xx_bcount))
model=card[nr];
if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) {
dev->name,dev->name,dev->name,dev->name,dev->name);
printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
dev->name);
- for (i = 0; i < em2820_bcount; i++) {
+ for (i = 0; i < em28xx_bcount; i++) {
printk("%s: card=%d -> %s\n",
- dev->name, i, em2820_boards[i].name);
+ dev->name, i, em28xx_boards[i].name);
}
}
/* allocate device struct */
- retval = em2820_init_dev(&dev, udev, nr, model);
+ retval = em28xx_init_dev(&dev, udev, nr, model);
if (retval)
return retval;
- em2820_info("Found %s\n", em2820_boards[model].name);
+ em28xx_info("Found %s\n", em28xx_boards[model].name);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
}
/*
- * em2820_usb_disconnect()
+ * em28xx_usb_disconnect()
* called when the device gets diconencted
* video device will be unregistered on v4l2_close in case it is still open
*/
-static void em2820_usb_disconnect(struct usb_interface *interface)
+static void em28xx_usb_disconnect(struct usb_interface *interface)
{
- struct em2820 *dev = usb_get_intfdata(interface);
+ struct em28xx *dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!dev)
return;
- down_write(&em2820_disconnect);
+ down_write(&em28xx_disconnect);
down(&dev->lock);
- em2820_info("disconnecting %s\n", dev->vdev->name);
+ em28xx_info("disconnecting %s\n", dev->vdev->name);
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- em2820_warn
+ em28xx_warn
("device /dev/video%d is open! Deregistration and memory "
"deallocation are deferred on close.\n", dev->vdev->minor);
dev->state |= DEV_MISCONFIGURED;
- em2820_uninit_isoc(dev);
+ em28xx_uninit_isoc(dev);
dev->state |= DEV_DISCONNECTED;
wake_up_interruptible(&dev->wait_frame);
wake_up_interruptible(&dev->wait_stream);
} else {
dev->state |= DEV_DISCONNECTED;
- em2820_release_resources(dev);
+ em28xx_release_resources(dev);
}
up(&dev->lock);
if (!dev->users)
kfree(dev);
- up_write(&em2820_disconnect);
+ up_write(&em28xx_disconnect);
}
-static struct usb_driver em2820_usb_driver = {
+static struct usb_driver em28xx_usb_driver = {
.owner = THIS_MODULE,
- .name = "em2820",
- .probe = em2820_usb_probe,
- .disconnect = em2820_usb_disconnect,
- .id_table = em2820_id_table,
+ .name = "em28xx",
+ .probe = em28xx_usb_probe,
+ .disconnect = em28xx_usb_disconnect,
+ .id_table = em28xx_id_table,
};
-static int __init em2820_module_init(void)
+static int __init em28xx_module_init(void)
{
int result;
printk(KERN_INFO DRIVER_NAME " v4l2 driver version %d.%d.%d loaded\n",
- (EM2820_VERSION_CODE >> 16) & 0xff,
- (EM2820_VERSION_CODE >> 8) & 0xff, EM2820_VERSION_CODE & 0xff);
+ (EM28XX_VERSION_CODE >> 16) & 0xff,
+ (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO DRIVER_NAME " snapshot date %04d-%02d-%02d\n",
SNAPSHOT / 10000, (SNAPSHOT / 100) % 100, SNAPSHOT % 100);
#endif
/* register this driver with the USB subsystem */
- result = usb_register(&em2820_usb_driver);
+ result = usb_register(&em28xx_usb_driver);
if (result)
- em2820_err(DRIVER_NAME
+ em28xx_err(DRIVER_NAME
" usb_register failed. Error number %d.\n", result);
return result;
}
-static void __exit em2820_module_exit(void)
+static void __exit em28xx_module_exit(void)
{
/* deregister this driver with the USB subsystem */
- usb_deregister(&em2820_usb_driver);
+ usb_deregister(&em28xx_usb_driver);
}
-module_init(em2820_module_init);
-module_exit(em2820_module_exit);
+module_init(em28xx_module_init);
+module_exit(em28xx_module_exit);
/*
- em2820-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
+ em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
Ludovico Cavedon <cavedon@sssup.it>
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef _EM2820_H
-#define _EM2820_H
+#ifndef _EM28XX_H
+#define _EM28XX_H
#include <linux/videodev.h>
#include <linux/i2c.h>
#define UNSET -1
/* maximum number of em28xx boards */
-#define EM2820_MAXBOARDS 1 /*FIXME: should be bigger */
+#define EM28XX_MAXBOARDS 1 /*FIXME: should be bigger */
/* maximum number of frames that can be queued */
-#define EM2820_NUM_FRAMES 5
+#define EM28XX_NUM_FRAMES 5
/* number of frames that get used for v4l2_read() */
-#define EM2820_NUM_READ_FRAMES 2
+#define EM28XX_NUM_READ_FRAMES 2
/* number of buffers for isoc transfers */
-#define EM2820_NUM_BUFS 5
+#define EM28XX_NUM_BUFS 5
/* number of packets for each buffer
windows requests only 40 packets .. so we better do the same
this is what I found out for all alternate numbers there!
*/
-#define EM2820_NUM_PACKETS 40
+#define EM28XX_NUM_PACKETS 40
/* default alternate; 0 means choose the best */
-#define EM2820_PINOUT 0
-#define EM2820_MAX_ALT 7
+#define EM28XX_PINOUT 0
+#define EM28XX_MAX_ALT 7
-#define EM2820_INTERLACED_DEFAULT 1
+#define EM28XX_INTERLACED_DEFAULT 1
/*
#define (use usbview if you want to get the other alternate number infos)
*/
/* time to wait when stopping the isoc transfer */
-#define EM2820_URB_TIMEOUT msecs_to_jiffies(EM2820_NUM_BUFS * EM2820_NUM_PACKETS)
+#define EM28XX_URB_TIMEOUT msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
/* time in msecs to wait for i2c writes to finish */
#define EM2800_I2C_WRITE_TIMEOUT 20
/* the various frame states */
-enum em2820_frame_state {
+enum em28xx_frame_state {
F_UNUSED = 0,
F_QUEUED,
F_GRABBING,
};
/* stream states */
-enum em2820_stream_state {
+enum em28xx_stream_state {
STREAM_OFF,
STREAM_INTERRUPT,
STREAM_ON,
};
/* frames */
-struct em2820_frame_t {
+struct em28xx_frame_t {
void *bufmem;
struct v4l2_buffer buf;
- enum em2820_frame_state state;
+ enum em28xx_frame_state state;
struct list_head frame;
unsigned long vma_use_count;
int top_field;
};
/* io methods */
-enum em2820_io_method {
+enum em28xx_io_method {
IO_NONE,
IO_READ,
IO_MMAP,
/* inputs */
-#define MAX_EM2820_INPUT 4
-enum enum2820_itype {
- EM2820_VMUX_COMPOSITE1 = 1,
- EM2820_VMUX_COMPOSITE2,
- EM2820_VMUX_COMPOSITE3,
- EM2820_VMUX_COMPOSITE4,
- EM2820_VMUX_SVIDEO,
- EM2820_VMUX_TELEVISION,
- EM2820_VMUX_CABLE,
- EM2820_VMUX_DVB,
- EM2820_VMUX_DEBUG,
- EM2820_RADIO,
+#define MAX_EM28XX_INPUT 4
+enum enum28xx_itype {
+ EM28XX_VMUX_COMPOSITE1 = 1,
+ EM28XX_VMUX_COMPOSITE2,
+ EM28XX_VMUX_COMPOSITE3,
+ EM28XX_VMUX_COMPOSITE4,
+ EM28XX_VMUX_SVIDEO,
+ EM28XX_VMUX_TELEVISION,
+ EM28XX_VMUX_CABLE,
+ EM28XX_VMUX_DVB,
+ EM28XX_VMUX_DEBUG,
+ EM28XX_RADIO,
};
-struct em2820_input {
- enum enum2820_itype type;
+struct em28xx_input {
+ enum enum28xx_itype type;
unsigned int vmux;
unsigned int amux;
};
-#define INPUT(nr) (&em2820_boards[dev->model].input[nr])
+#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
-enum em2820_decoder {
- EM2820_TVP5150,
- EM2820_SAA7113,
- EM2820_SAA7114
+enum em28xx_decoder {
+ EM28XX_TVP5150,
+ EM28XX_SAA7113,
+ EM28XX_SAA7114
};
-struct em2820_board {
+struct em28xx_board {
char *name;
int vchannels;
int norm;
unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
- enum em2820_decoder decoder;
+ enum em28xx_decoder decoder;
- struct em2820_input input[MAX_EM2820_INPUT];
+ struct em28xx_input input[MAX_EM28XX_INPUT];
};
-struct em2820_eeprom {
+struct em28xx_eeprom {
u32 id; /* 0x9567eb1a */
u16 vendor_ID;
u16 product_ID;
};
/* device states */
-enum em2820_dev_state {
+enum em28xx_dev_state {
DEV_INITIALIZED = 0x01,
DEV_DISCONNECTED = 0x02,
DEV_MISCONFIGURED = 0x04,
};
/* tvnorms */
-struct em2820_tvnorm {
+struct em28xx_tvnorm {
char *name;
v4l2_std_id id;
/* mode for saa7113h */
};
/* main device struct */
-struct em2820 {
+struct em28xx {
/* generic device properties */
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
unsigned int has_msp34xx:1;
unsigned int has_tda9887:1;
- enum em2820_decoder decoder;
+ enum em28xx_decoder decoder;
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
int users; /* user count for exclusive use */
struct video_device *vdev; /* video for linux device struct */
struct video_picture vpic; /* picture settings only used to init saa7113h */
- struct em2820_tvnorm *tvnorm; /* selected tv norm */
+ struct em28xx_tvnorm *tvnorm; /* selected tv norm */
int ctl_freq; /* selected frequency */
unsigned int ctl_input; /* selected input */
unsigned int ctl_ainput; /* slected audio input */
int mute;
int volume;
/* frame properties */
- struct em2820_frame_t frame[EM2820_NUM_FRAMES]; /* list of frames */
+ struct em28xx_frame_t frame[EM28XX_NUM_FRAMES]; /* list of frames */
int num_frames; /* number of frames currently in use */
unsigned int frame_count; /* total number of transfered frames */
- struct em2820_frame_t *frame_current; /* the frame that is being filled */
+ struct em28xx_frame_t *frame_current; /* the frame that is being filled */
int width; /* current frame width */
int height; /* current frame height */
int frame_size; /* current frame size */
int type;
/* states */
- enum em2820_dev_state state;
- enum em2820_stream_state stream;
- enum em2820_io_method io;
+ enum em28xx_dev_state state;
+ enum em28xx_stream_state stream;
+ enum em28xx_io_method io;
/* locks */
struct semaphore lock, fileop_lock;
spinlock_t queue_lock;
struct usb_device *udev; /* the usb device */
int alt; /* alternate */
int max_pkt_size; /* max packet size of isoc transaction */
- unsigned int alt_max_pkt_size[EM2820_MAX_ALT + 1]; /* array of wMaxPacketSize */
- struct urb *urb[EM2820_NUM_BUFS]; /* urb for isoc transfers */
- char *transfer_buffer[EM2820_NUM_BUFS]; /* transfer buffers for isoc transfer */
+ unsigned int alt_max_pkt_size[EM28XX_MAX_ALT + 1]; /* array of wMaxPacketSize */
+ struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
+ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
/* helper funcs that call usb_control_msg */
- int (*em2820_write_regs) (struct em2820 * dev, u16 reg, char *buf,
+ int (*em28xx_write_regs) (struct em28xx * dev, u16 reg, char *buf,
int len);
- int (*em2820_read_reg) (struct em2820 * dev, u16 reg);
- int (*em2820_read_reg_req_len) (struct em2820 * dev, u8 req, u16 reg,
+ int (*em28xx_read_reg) (struct em28xx * dev, u16 reg);
+ int (*em28xx_read_reg_req_len) (struct em28xx * dev, u8 req, u16 reg,
char *buf, int len);
- int (*em2820_write_regs_req) (struct em2820 * dev, u8 req, u16 reg,
+ int (*em28xx_write_regs_req) (struct em28xx * dev, u8 req, u16 reg,
char *buf, int len);
- int (*em2820_read_reg_req) (struct em2820 * dev, u8 req, u16 reg);
+ int (*em28xx_read_reg_req) (struct em28xx * dev, u8 req, u16 reg);
};
-/* Provided by em2820-i2c.c */
+/* Provided by em28xx-i2c.c */
-void em2820_i2c_call_clients(struct em2820 *dev, unsigned int cmd, void *arg);
-int em2820_i2c_register(struct em2820 *dev);
-int em2820_i2c_unregister(struct em2820 *dev);
+void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg);
+int em28xx_i2c_register(struct em28xx *dev);
+int em28xx_i2c_unregister(struct em28xx *dev);
-/* Provided by em2820-input.c */
+/* Provided by em28xx-input.c */
-void em2820_set_ir(struct em2820 * dev,struct IR_i2c *ir);
+void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir);
-/* Provided by em2820-core.c */
+/* Provided by em28xx-core.c */
-void em2820_print_ioctl(char *name, unsigned int cmd);
+void em28xx_print_ioctl(char *name, unsigned int cmd);
-u32 em2820_request_buffers(struct em2820 *dev, u32 count);
-void em2820_queue_unusedframes(struct em2820 *dev);
-void em2820_release_buffers(struct em2820 *dev);
+u32 em28xx_request_buffers(struct em28xx *dev, u32 count);
+void em28xx_queue_unusedframes(struct em28xx *dev);
+void em28xx_release_buffers(struct em28xx *dev);
-int em2820_read_reg_req_len(struct em2820 *dev, u8 req, u16 reg,
+int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
-int em2820_read_reg_req(struct em2820 *dev, u8 req, u16 reg);
-int em2820_read_reg(struct em2820 *dev, u16 reg);
-int em2820_write_regs_req(struct em2820 *dev, u8 req, u16 reg, char *buf,
+int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg);
+int em28xx_read_reg(struct em28xx *dev, u16 reg);
+int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len);
-int em2820_write_regs(struct em2820 *dev, u16 reg, char *buf, int len);
-int em2820_write_reg_bits(struct em2820 *dev, u16 reg, u8 val,
+int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
+int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask);
-int em2820_write_ac97(struct em2820 *dev, u8 reg, u8 * val);
-int em2820_audio_analog_set(struct em2820 *dev);
-int em2820_colorlevels_set_default(struct em2820 *dev);
-int em2820_capture_start(struct em2820 *dev, int start);
-int em2820_outfmt_set_yuv422(struct em2820 *dev);
-int em2820_accumulator_set(struct em2820 *dev, u8 xmin, u8 xmax, u8 ymin,
+int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val);
+int em28xx_audio_analog_set(struct em28xx *dev);
+int em28xx_colorlevels_set_default(struct em28xx *dev);
+int em28xx_capture_start(struct em28xx *dev, int start);
+int em28xx_outfmt_set_yuv422(struct em28xx *dev);
+int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, u8 ymin,
u8 ymax);
-int em2820_capture_area_set(struct em2820 *dev, u8 hstart, u8 vstart,
+int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
u16 width, u16 height);
-int em2820_scaler_set(struct em2820 *dev, u16 h, u16 v);
-int em2820_resolution_set(struct em2820 *dev);
-void em2820_isocIrq(struct urb *urb, struct pt_regs *regs);
-int em2820_init_isoc(struct em2820 *dev);
-void em2820_uninit_isoc(struct em2820 *dev);
-int em2820_set_alternate(struct em2820 *dev);
-
-/* Provided by em2820-cards.c */
+int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v);
+int em28xx_resolution_set(struct em28xx *dev);
+void em28xx_isocIrq(struct urb *urb, struct pt_regs *regs);
+int em28xx_init_isoc(struct em28xx *dev);
+void em28xx_uninit_isoc(struct em28xx *dev);
+int em28xx_set_alternate(struct em28xx *dev);
+
+/* Provided by em28xx-cards.c */
extern int em2800_variant_detect(struct usb_device* udev,int model);
-extern void em2820_card_setup(struct em2820 *dev);
-extern struct em2820_board em2820_boards[];
-extern struct usb_device_id em2820_id_table[];
-extern const unsigned int em2820_bcount;
+extern void em28xx_card_setup(struct em28xx *dev);
+extern struct em28xx_board em28xx_boards[];
+extern struct usb_device_id em28xx_id_table[];
+extern const unsigned int em28xx_bcount;
-/* em2820 registers */
+/* em28xx registers */
#define CHIPID_REG 0x0a
#define USBSUSP_REG 0x0c /* */
#define VIDEO_AC97 0x14
/* register settings */
-#define EM2820_AUDIO_SRC_TUNER 0xc0
-#define EM2820_AUDIO_SRC_LINE 0x80
+#define EM28XX_AUDIO_SRC_TUNER 0xc0
+#define EM28XX_AUDIO_SRC_LINE 0x80
/* printk macros */
-#define em2820_err(fmt, arg...) do {\
+#define em28xx_err(fmt, arg...) do {\
printk(KERN_ERR fmt , ##arg); } while (0)
-#define em2820_errdev(fmt, arg...) do {\
+#define em28xx_errdev(fmt, arg...) do {\
printk(KERN_ERR "%s: "fmt,\
dev->name , ##arg); } while (0)
-#define em2820_info(fmt, arg...) do {\
+#define em28xx_info(fmt, arg...) do {\
printk(KERN_INFO "%s: "fmt,\
dev->name , ##arg); } while (0)
-#define em2820_warn(fmt, arg...) do {\
+#define em28xx_warn(fmt, arg...) do {\
printk(KERN_WARNING "%s: "fmt,\
dev->name , ##arg); } while (0)
-inline static int em2820_audio_source(struct em2820 *dev, int input)
+inline static int em28xx_audio_source(struct em28xx *dev, int input)
{
- return em2820_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0);
+ return em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0);
}
-inline static int em2820_audio_usb_mute(struct em2820 *dev, int mute)
+inline static int em28xx_audio_usb_mute(struct em28xx *dev, int mute)
{
- return em2820_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80);
+ return em28xx_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80);
}
-inline static int em2820_audio_analog_setup(struct em2820 *dev)
+inline static int em28xx_audio_analog_setup(struct em28xx *dev)
{
/* unmute video mixer with default volume level */
- return em2820_write_ac97(dev, VIDEO_AC97, "\x08\x08");
+ return em28xx_write_ac97(dev, VIDEO_AC97, "\x08\x08");
}
-inline static int em2820_compression_disable(struct em2820 *dev)
+inline static int em28xx_compression_disable(struct em28xx *dev)
{
/* side effect of disabling scaler and mixer */
- return em2820_write_regs(dev, COMPR_REG, "\x00", 1);
+ return em28xx_write_regs(dev, COMPR_REG, "\x00", 1);
}
-inline static int em2820_contrast_get(struct em2820 *dev)
+inline static int em28xx_contrast_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, YGAIN_REG) & 0x1f;
+ return em28xx_read_reg(dev, YGAIN_REG) & 0x1f;
}
-inline static int em2820_brightness_get(struct em2820 *dev)
+inline static int em28xx_brightness_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, YOFFSET_REG);
+ return em28xx_read_reg(dev, YOFFSET_REG);
}
-inline static int em2820_saturation_get(struct em2820 *dev)
+inline static int em28xx_saturation_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, UVGAIN_REG) & 0x1f;
+ return em28xx_read_reg(dev, UVGAIN_REG) & 0x1f;
}
-inline static int em2820_u_balance_get(struct em2820 *dev)
+inline static int em28xx_u_balance_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, UOFFSET_REG);
+ return em28xx_read_reg(dev, UOFFSET_REG);
}
-inline static int em2820_v_balance_get(struct em2820 *dev)
+inline static int em28xx_v_balance_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, VOFFSET_REG);
+ return em28xx_read_reg(dev, VOFFSET_REG);
}
-inline static int em2820_gamma_get(struct em2820 *dev)
+inline static int em28xx_gamma_get(struct em28xx *dev)
{
- return em2820_read_reg(dev, GAMMA_REG) & 0x3f;
+ return em28xx_read_reg(dev, GAMMA_REG) & 0x3f;
}
-inline static int em2820_contrast_set(struct em2820 *dev, s32 val)
+inline static int em28xx_contrast_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, YGAIN_REG, &tmp, 1);
+ return em28xx_write_regs(dev, YGAIN_REG, &tmp, 1);
}
-inline static int em2820_brightness_set(struct em2820 *dev, s32 val)
+inline static int em28xx_brightness_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, YOFFSET_REG, &tmp, 1);
+ return em28xx_write_regs(dev, YOFFSET_REG, &tmp, 1);
}
-inline static int em2820_saturation_set(struct em2820 *dev, s32 val)
+inline static int em28xx_saturation_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, UVGAIN_REG, &tmp, 1);
+ return em28xx_write_regs(dev, UVGAIN_REG, &tmp, 1);
}
-inline static int em2820_u_balance_set(struct em2820 *dev, s32 val)
+inline static int em28xx_u_balance_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, UOFFSET_REG, &tmp, 1);
+ return em28xx_write_regs(dev, UOFFSET_REG, &tmp, 1);
}
-inline static int em2820_v_balance_set(struct em2820 *dev, s32 val)
+inline static int em28xx_v_balance_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, VOFFSET_REG, &tmp, 1);
+ return em28xx_write_regs(dev, VOFFSET_REG, &tmp, 1);
}
-inline static int em2820_gamma_set(struct em2820 *dev, s32 val)
+inline static int em28xx_gamma_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
- return em2820_write_regs(dev, GAMMA_REG, &tmp, 1);
+ return em28xx_write_regs(dev, GAMMA_REG, &tmp, 1);
}
/*FIXME: maxw should be dependent of alt mode */
-inline static unsigned int norm_maxw(struct em2820 *dev)
+inline static unsigned int norm_maxw(struct em28xx *dev)
{
switch(dev->model){
case (EM2820_BOARD_MSI_VOX_USB_2): return(640);
}
}
-inline static unsigned int norm_maxh(struct em2820 *dev)
+inline static unsigned int norm_maxh(struct em28xx *dev)
{
switch(dev->model){
case (EM2820_BOARD_MSI_VOX_USB_2): return(480);
projects / linux-2.6 / commitdiff