]> err.no Git - linux-2.6/commitdiff
ath5k: convert LED code to use mac80211 triggers
authorBob Copeland <me@bobcopeland.com>
Thu, 26 Jun 2008 02:35:28 +0000 (22:35 -0400)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 27 Jun 2008 13:09:17 +0000 (09:09 -0400)
This change cleans up the ath5k LED code and converts it to use
the standard LED device class along with the rx/tx LED triggers
provided by mac80211.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath5k/Kconfig
drivers/net/wireless/ath5k/base.c
drivers/net/wireless/ath5k/base.h

index f1f2aea2eab4f8ee86e880fd46a8685b8d683157..75383a5df992da8626471bcd9244e632f8fa8917 100644 (file)
@@ -1,6 +1,9 @@
 config ATH5K
        tristate "Atheros 5xxx wireless cards support"
        depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+       select MAC80211_LEDS
+       select LEDS_CLASS
+       select NEW_LEDS
        ---help---
          This module adds support for wireless adapters based on
          Atheros 5xxx chipset.
index 010c66555950bbc5acb5ecf824ef98c44c0fbc5b..a80a3a4744abf8b549199d8dccf93876de088ca1 100644 (file)
 #include "reg.h"
 #include "debug.h"
 
-enum {
-       ATH_LED_TX,
-       ATH_LED_RX,
-};
-
 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
 
 
@@ -309,13 +304,10 @@ static void       ath5k_tasklet_reset(unsigned long data);
 
 static void    ath5k_calibrate(unsigned long data);
 /* LED functions */
-static void    ath5k_led_off(unsigned long data);
-static void    ath5k_led_blink(struct ath5k_softc *sc,
-                               unsigned int on,
-                               unsigned int off);
-static void    ath5k_led_event(struct ath5k_softc *sc,
-                               int event);
-
+static int     ath5k_init_leds(struct ath5k_softc *sc);
+static void    ath5k_led_enable(struct ath5k_softc *sc);
+static void    ath5k_led_off(struct ath5k_softc *sc);
+static void    ath5k_unregister_leds(struct ath5k_softc *sc);
 
 /*
  * Module init/exit functions
@@ -596,8 +588,7 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
        struct ieee80211_hw *hw = pci_get_drvdata(pdev);
        struct ath5k_softc *sc = hw->priv;
 
-       if (test_bit(ATH_STAT_LEDSOFT, sc->status))
-               ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1);
+       ath5k_led_off(sc);
 
        ath5k_stop_hw(sc);
        pci_save_state(pdev);
@@ -632,10 +623,7 @@ ath5k_pci_resume(struct pci_dev *pdev)
        pci_write_config_byte(pdev, 0x41, 0);
 
        ath5k_init(sc);
-       if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-               ath5k_hw_set_gpio_output(ah, sc->led_pin);
-               ath5k_hw_set_gpio(ah, sc->led_pin, 0);
-       }
+       ath5k_led_enable(sc);
 
        /*
         * Reset the key cache since some parts do not
@@ -742,27 +730,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
        tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
        tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
        setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
-       setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc);
-
-       sc->led_on = 0; /* low true */
-       /*
-        * Auto-enable soft led processing for IBM cards and for
-        * 5211 minipci cards.
-        */
-       if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
-                       pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
-               __set_bit(ATH_STAT_LEDSOFT, sc->status);
-               sc->led_pin = 0;
-       }
-       /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
-       if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
-               __set_bit(ATH_STAT_LEDSOFT, sc->status);
-               sc->led_pin = 0;
-       }
-       if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-               ath5k_hw_set_gpio_output(ah, sc->led_pin);
-               ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
-       }
 
        ath5k_hw_get_lladdr(ah, mac);
        SET_IEEE80211_PERM_ADDR(hw, mac);
@@ -776,6 +743,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
                goto err_queues;
        }
 
+       ath5k_init_leds(sc);
+
        return 0;
 err_queues:
        ath5k_txq_release(sc);
@@ -809,6 +778,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
        ath5k_desc_free(sc, pdev);
        ath5k_txq_release(sc);
        ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
+       ath5k_unregister_leds(sc);
 
        /*
         * NB: can't reclaim these until after ieee80211_ifdetach
@@ -1060,65 +1030,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
        return 0;
 }
 
-/*
- * TODO: CLEAN THIS !!!
- */
 static void
 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
 {
-       if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) {
-               /* from Atheros NDIS driver, w/ permission */
-               static const struct {
-                       u16 rate;       /* tx/rx 802.11 rate */
-                       u16 timeOn;     /* LED on time (ms) */
-                       u16 timeOff;    /* LED off time (ms) */
-               } blinkrates[] = {
-                       { 108,  40,  10 },
-                       {  96,  44,  11 },
-                       {  72,  50,  13 },
-                       {  48,  57,  14 },
-                       {  36,  67,  16 },
-                       {  24,  80,  20 },
-                       {  22, 100,  25 },
-                       {  18, 133,  34 },
-                       {  12, 160,  40 },
-                       {  10, 200,  50 },
-                       {   6, 240,  58 },
-                       {   4, 267,  66 },
-                       {   2, 400, 100 },
-                       {   0, 500, 130 }
-               };
-               const struct ath5k_rate_table *rt =
-                               ath5k_hw_get_rate_table(sc->ah, mode);
-               unsigned int i, j;
-
-               BUG_ON(rt == NULL);
-
-               memset(sc->hwmap, 0, sizeof(sc->hwmap));
-               for (i = 0; i < 32; i++) {
-                       u8 ix = rt->rate_code_to_index[i];
-                       if (ix == 0xff) {
-                               sc->hwmap[i].ledon = msecs_to_jiffies(500);
-                               sc->hwmap[i].ledoff = msecs_to_jiffies(130);
-                               continue;
-                       }
-                       sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD;
-                       /* receive frames include FCS */
-                       sc->hwmap[i].rxflags = sc->hwmap[i].txflags |
-                                       IEEE80211_RADIOTAP_F_FCS;
-                       /* setup blink rate table to avoid per-packet lookup */
-                       for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++)
-                               if (blinkrates[j].rate == /* XXX why 7f? */
-                                               (rt->rates[ix].dot11_rate&0x7f))
-                                       break;
-
-                       sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j].
-                                       timeOn);
-                       sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j].
-                                       timeOff);
-               }
-       }
-
        sc->curmode = mode;
 
        if (mode == AR5K_MODE_11A) {
@@ -1900,8 +1814,6 @@ accept:
                        ath5k_check_ibss_tsf(sc, skb, &rxs);
 
                __ieee80211_rx(sc->hw, skb, &rxs);
-               sc->led_rxrate = rs.rs_rate;
-               ath5k_led_event(sc, ATH_LED_RX);
 next:
                list_move_tail(&bf->list, &sc->rxbuf);
        } while (ath5k_rxbuf_setup(sc, bf) == 0);
@@ -1982,13 +1894,9 @@ ath5k_tasklet_tx(unsigned long data)
        struct ath5k_softc *sc = (void *)data;
 
        ath5k_tx_processq(sc, sc->txq);
-
-       ath5k_led_event(sc, ATH_LED_TX);
 }
 
 
-
-
 /*****************\
 * Beacon handling *
 \*****************/
@@ -2363,11 +2271,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
        ieee80211_stop_queues(sc->hw);
 
        if (!test_bit(ATH_STAT_INVALID, sc->status)) {
-               if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
-                       del_timer_sync(&sc->led_tim);
-                       ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
-                       __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
-               }
+               ath5k_led_off(sc);
                ath5k_hw_set_intr(ah, 0);
        }
        ath5k_txq_cleanup(sc);
@@ -2563,54 +2467,123 @@ ath5k_calibrate(unsigned long data)
 \***************/
 
 static void
-ath5k_led_off(unsigned long data)
+ath5k_led_enable(struct ath5k_softc *sc)
 {
-       struct ath5k_softc *sc = (void *)data;
-
-       if (test_bit(ATH_STAT_LEDENDBLINK, sc->status))
-               __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
-       else {
-               __set_bit(ATH_STAT_LEDENDBLINK, sc->status);
-               ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
-               mod_timer(&sc->led_tim, jiffies + sc->led_off);
+       if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+               ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
+               ath5k_led_off(sc);
        }
 }
 
-/*
- * Blink the LED according to the specified on/off times.
- */
 static void
-ath5k_led_blink(struct ath5k_softc *sc, unsigned int on,
-               unsigned int off)
+ath5k_led_on(struct ath5k_softc *sc)
 {
-       ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off);
+       if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+               return;
        ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
-       __set_bit(ATH_STAT_LEDBLINKING, sc->status);
-       __clear_bit(ATH_STAT_LEDENDBLINK, sc->status);
-       sc->led_off = off;
-       mod_timer(&sc->led_tim, jiffies + on);
 }
 
 static void
-ath5k_led_event(struct ath5k_softc *sc, int event)
+ath5k_led_off(struct ath5k_softc *sc)
 {
-       if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status)))
+       if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
                return;
-       if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status)))
-               return; /* don't interrupt active blink */
-       switch (event) {
-       case ATH_LED_TX:
-               ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon,
-                       sc->hwmap[sc->led_txrate].ledoff);
-               break;
-       case ATH_LED_RX:
-               ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon,
-                       sc->hwmap[sc->led_rxrate].ledoff);
-               break;
+       ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
+}
+
+static void
+ath5k_led_brightness_set(struct led_classdev *led_dev,
+       enum led_brightness brightness)
+{
+       struct ath5k_led *led = container_of(led_dev, struct ath5k_led,
+               led_dev);
+
+       if (brightness == LED_OFF)
+               ath5k_led_off(led->sc);
+       else
+               ath5k_led_on(led->sc);
+}
+
+static int
+ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
+                  const char *name, char *trigger)
+{
+       int err;
+
+       led->sc = sc;
+       strncpy(led->name, name, sizeof(led->name));
+       led->led_dev.name = led->name;
+       led->led_dev.default_trigger = trigger;
+       led->led_dev.brightness_set = ath5k_led_brightness_set;
+
+       err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
+       if (err)
+       {
+               ATH5K_WARN(sc, "could not register LED %s\n", name);
+               led->sc = NULL;
        }
+       return err;
+}
+
+static void
+ath5k_unregister_led(struct ath5k_led *led)
+{
+       if (!led->sc)
+               return;
+       led_classdev_unregister(&led->led_dev);
+       ath5k_led_off(led->sc);
+       led->sc = NULL;
+}
+
+static void
+ath5k_unregister_leds(struct ath5k_softc *sc)
+{
+       ath5k_unregister_led(&sc->rx_led);
+       ath5k_unregister_led(&sc->tx_led);
 }
 
 
+static int
+ath5k_init_leds(struct ath5k_softc *sc)
+{
+       int ret = 0;
+       struct ieee80211_hw *hw = sc->hw;
+       struct pci_dev *pdev = sc->pdev;
+       char name[ATH5K_LED_MAX_NAME_LEN + 1];
+
+       sc->led_on = 0;  /* active low */
+
+       /*
+        * Auto-enable soft led processing for IBM cards and for
+        * 5211 minipci cards.
+        */
+       if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
+           pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
+               __set_bit(ATH_STAT_LEDSOFT, sc->status);
+               sc->led_pin = 0;
+       }
+       /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
+       if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
+               __set_bit(ATH_STAT_LEDSOFT, sc->status);
+               sc->led_pin = 1;
+       }
+       if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
+               goto out;
+
+       ath5k_led_enable(sc);
+
+       snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy));
+       ret = ath5k_register_led(sc, &sc->rx_led, name,
+               ieee80211_get_rx_led_name(hw));
+       if (ret)
+               goto out;
+
+       snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy));
+       ret = ath5k_register_led(sc, &sc->tx_led, name,
+               ieee80211_get_tx_led_name(hw));
+out:
+       return ret;
+}
 
 
 /********************\
@@ -2648,8 +2621,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
                memmove(skb->data, skb->data+pad, hdrlen);
        }
 
-       sc->led_txrate = ieee80211_get_tx_rate(hw, info)->hw_value;
-
        spin_lock_irqsave(&sc->txbuflock, flags);
        if (list_empty(&sc->txbuf)) {
                ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
index bb4b26d523ab06177c695c9ed3fe1ec546344472..47f414b09e67f30032e3a67ca055ca1a650be458 100644 (file)
@@ -45,6 +45,7 @@
 #include <linux/list.h>
 #include <linux/wireless.h>
 #include <linux/if_ether.h>
+#include <linux/leds.h>
 
 #include "ath5k.h"
 #include "debug.h"
@@ -79,6 +80,19 @@ struct ath5k_txq {
        bool                    setup;
 };
 
+#define ATH5K_LED_MAX_NAME_LEN 31
+
+/*
+ * State for LED triggers
+ */
+struct ath5k_led
+{
+       char name[ATH5K_LED_MAX_NAME_LEN + 1];  /* name of the LED in sysfs */
+       struct ath5k_softc *sc;                 /* driver state */
+       struct led_classdev led_dev;            /* led classdev */
+};
+
+
 #if CHAN_DEBUG
 #define ATH_CHAN_MAX   (26+26+26+200+200)
 #else
@@ -118,13 +132,11 @@ struct ath5k_softc {
        size_t                  desc_len;       /* size of TX/RX descriptors */
        u16                     cachelsz;       /* cache line size */
 
-       DECLARE_BITMAP(status, 6);
+       DECLARE_BITMAP(status, 4);
 #define ATH_STAT_INVALID       0               /* disable hardware accesses */
 #define ATH_STAT_MRRETRY       1               /* multi-rate retry support */
 #define ATH_STAT_PROMISC       2
-#define ATH_STAT_LEDBLINKING   3               /* LED blink operation active */
-#define ATH_STAT_LEDENDBLINK   4               /* finish LED blink operation */
-#define ATH_STAT_LEDSOFT       5               /* enable LED gpio status */
+#define ATH_STAT_LEDSOFT       3               /* enable LED gpio status */
 
        unsigned int            filter_flags;   /* HW flags, AR5K_RX_FILTER_* */
        unsigned int            curmode;        /* current phy mode */
@@ -132,13 +144,6 @@ struct ath5k_softc {
 
        struct ieee80211_vif *vif;
 
-       struct {
-               u8      rxflags;        /* radiotap rx flags */
-               u8      txflags;        /* radiotap tx flags */
-               u16     ledon;          /* softled on time */
-               u16     ledoff;         /* softled off time */
-       } hwmap[32];                            /* h/w rate ix mappings */
-
        enum ath5k_int          imask;          /* interrupt mask copy */
 
        DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */
@@ -148,9 +153,6 @@ struct ath5k_softc {
        unsigned int            led_pin,        /* GPIO pin for driving LED */
                                led_on,         /* pin setting for LED on */
                                led_off;        /* off time for current blink */
-       struct timer_list       led_tim;        /* led off timer */
-       u8                      led_rxrate;     /* current rx rate for LED */
-       u8                      led_txrate;     /* current tx rate for LED */
 
        struct tasklet_struct   restq;          /* reset tasklet */
 
@@ -159,6 +161,7 @@ struct ath5k_softc {
        spinlock_t              rxbuflock;
        u32                     *rxlink;        /* link ptr in last RX desc */
        struct tasklet_struct   rxtq;           /* rx intr tasklet */
+       struct ath5k_led        rx_led;         /* rx led */
 
        struct list_head        txbuf;          /* transmit buffer */
        spinlock_t              txbuflock;
@@ -167,6 +170,7 @@ struct ath5k_softc {
 
        struct ath5k_txq        *txq;           /* beacon and tx*/
        struct tasklet_struct   txtq;           /* tx intr tasklet */
+       struct ath5k_led        tx_led;         /* tx led */
 
        struct ath5k_buf        *bbuf;          /* beacon buffer */
        unsigned int            bhalq,          /* SW q for outgoing beacons */