]> err.no Git - linux-2.6/commitdiff
sky2: fix for Yukon FE (regression in 2.6.25)
authorStephen Hemminger <shemminger@linux-foundation.org>
Tue, 5 Feb 2008 03:45:13 +0000 (19:45 -0800)
committerJeff Garzik <jeff@garzik.org>
Tue, 5 Feb 2008 18:31:09 +0000 (13:31 -0500)
The Yukon FE chip has a ram buffer therefore it needs the alignment
restriction and hang check workarounds.

Therefore:
  * Autodetect the prescence/absence of ram buffer
  * Rename the flag value to reflect this
  * Use it consistently (ie don't reread register)

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/sky2.c
drivers/net/sky2.h

index dc062367a1c8b515138b7023921d81e31eac82d4..9a6295909e43c318d4fa4da46995d2121e362920 100644 (file)
@@ -857,7 +857,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
        sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
        /* On chips without ram buffer, pause is controled by MAC level */
-       if (sky2_read8(hw, B2_E_0) == 0) {
+       if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
                sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
                sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
 
@@ -1194,7 +1194,7 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
        struct sk_buff *skb;
        int i;
 
-       if (sky2->hw->flags & SKY2_HW_FIFO_HANG_CHECK) {
+       if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
                unsigned char *start;
                /*
                 * Workaround for a bug in FIFO that cause hang
@@ -1387,6 +1387,7 @@ static int sky2_up(struct net_device *dev)
        if (ramsize > 0) {
                u32 rxspace;
 
+               hw->flags |= SKY2_HW_RAM_BUFFER;
                pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
                if (ramsize < 16)
                        rxspace = ramsize / 2;
@@ -2026,7 +2027,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 
        synchronize_irq(hw->pdev->irq);
 
-       if (sky2_read8(hw, B2_E_0) == 0)
+       if (!(hw->flags & SKY2_HW_RAM_BUFFER))
                sky2_set_tx_stfwd(hw, port);
 
        ctl = gma_read16(hw, port, GM_GP_CTRL);
@@ -2566,7 +2567,7 @@ static void sky2_watchdog(unsigned long arg)
                        ++active;
 
                        /* For chips with Rx FIFO, check if stuck */
-                       if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) &&
+                       if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
                             sky2_rx_hung(dev)) {
                                pr_info(PFX "%s: receiver hang detected\n",
                                        dev->name);
@@ -2722,11 +2723,7 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 
        switch(hw->chip_id) {
        case CHIP_ID_YUKON_XL:
-               hw->flags = SKY2_HW_GIGABIT
-                       | SKY2_HW_NEWER_PHY;
-               if (hw->chip_rev < 3)
-                       hw->flags |= SKY2_HW_FIFO_HANG_CHECK;
-
+               hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
                break;
 
        case CHIP_ID_YUKON_EC_U:
@@ -2752,7 +2749,7 @@ static int __devinit sky2_init(struct sky2_hw *hw)
                        dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
                        return -EOPNOTSUPP;
                }
-               hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK;
+               hw->flags = SKY2_HW_GIGABIT;
                break;
 
        case CHIP_ID_YUKON_FE:
index 2bced1a0898f45a1b08bb60d941c938619d7c7e0..5ab5c1c7c5aa76ed30d8c6850b09192afac5d6db 100644 (file)
@@ -2045,7 +2045,7 @@ struct sky2_hw {
 #define SKY2_HW_FIBRE_PHY      0x00000002
 #define SKY2_HW_GIGABIT                0x00000004
 #define SKY2_HW_NEWER_PHY      0x00000008
-#define SKY2_HW_FIFO_HANG_CHECK        0x00000010
+#define SKY2_HW_RAM_BUFFER     0x00000010
 #define SKY2_HW_NEW_LE         0x00000020      /* new LSOv2 format */
 #define SKY2_HW_AUTO_TX_SUM    0x00000040      /* new IP decode for Tx */
 #define SKY2_HW_ADV_POWER_CTL  0x00000080      /* additional PHY power regs */