]> err.no Git - linux-2.6/commitdiff
m68k: Mac89x0 Ethernet netif updates
authorMatthias Urlichs <smurf@smurf.noris.de>
Tue, 1 May 2007 20:32:41 +0000 (22:32 +0200)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Sat, 5 May 2007 00:59:06 +0000 (17:59 -0700)
Macintosh CS89x0 Ethernet: Netif updates
Addition of netif_stop_queue() before transmission by Michael Schmitz
skb_copy_{from,to}_linear_data() conversion by Geert Uytterhoeven

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/net/Kconfig
drivers/net/mac89x0.c

index dcdad217df51ef439a695215177c1fd1a177274b..092e4cf07430dcb7ca14028e30ac5fb6b268027a 100644 (file)
@@ -311,7 +311,7 @@ config MAC8390
 
 config MAC89x0
        tristate "Macintosh CS89x0 based ethernet cards"
-       depends on NET_ETHERNET && MAC && BROKEN
+       depends on NET_ETHERNET && MAC
        ---help---
          Support for CS89x0 chipset based Ethernet cards.  If you have a
          Nubus or LC-PDS network (Ethernet) card of this type, say Y and
index 90e695d53266a7d5db911093e07f60ee3639ab96..26a3b45a4a349e86f8072118969f3d89b2697fb4 100644 (file)
@@ -128,7 +128,7 @@ struct net_local {
 extern void reset_chip(struct net_device *dev);
 #endif
 static int net_open(struct net_device *dev);
-static int     net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t net_interrupt(int irq, void *dev_id);
 static void set_multicast_list(struct net_device *dev);
 static void net_rx(struct net_device *dev);
@@ -374,56 +374,39 @@ net_open(struct net_device *dev)
 static int
 net_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
-       if (dev->tbusy) {
-               /* If we get here, some higher level has decided we are broken.
-                  There should really be a "kick me" function call instead. */
-               int tickssofar = jiffies - dev->trans_start;
-               if (tickssofar < 5)
-                       return 1;
-               if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
-                          tx_done(dev) ? "IRQ conflict" : "network cable problem");
-               /* Try to restart the adaptor. */
-               dev->tbusy=0;
-               dev->trans_start = jiffies;
-       }
-
-       /* Block a timer-based transmit from overlapping.  This could better be
-          done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
-       if (test_and_set_bit(0, (void*)&dev->tbusy) != 0)
-               printk("%s: Transmitter access conflict.\n", dev->name);
-       else {
-               struct net_local *lp = netdev_priv(dev);
-               unsigned long flags;
-
-               if (net_debug > 3)
-                       printk("%s: sent %d byte packet of type %x\n",
-                              dev->name, skb->len,
-                              (skb->data[ETH_ALEN+ETH_ALEN] << 8)
-                              | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
-               /* keep the upload from being interrupted, since we
-                   ask the chip to start transmitting before the
-                   whole packet has been completely uploaded. */
-               local_irq_save(flags);
+       struct net_local *lp = netdev_priv(dev);
+       unsigned long flags;
 
-               /* initiate a transmit sequence */
-               writereg(dev, PP_TxCMD, lp->send_cmd);
-               writereg(dev, PP_TxLength, skb->len);
+       if (net_debug > 3)
+               printk("%s: sent %d byte packet of type %x\n",
+                      dev->name, skb->len,
+                      (skb->data[ETH_ALEN+ETH_ALEN] << 8)
+                      | skb->data[ETH_ALEN+ETH_ALEN+1]);
 
-               /* Test to see if the chip has allocated memory for the packet */
-               if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
-                       /* Gasp!  It hasn't.  But that shouldn't happen since
-                          we're waiting for TxOk, so return 1 and requeue this packet. */
-                       local_irq_restore(flags);
-                       return 1;
-               }
+       /* keep the upload from being interrupted, since we
+          ask the chip to start transmitting before the
+          whole packet has been completely uploaded. */
+       local_irq_save(flags);
+       netif_stop_queue(dev);
 
-               /* Write the contents of the packet */
-               memcpy_toio(dev->mem_start + PP_TxFrame, skb->data, skb->len+1);
+       /* initiate a transmit sequence */
+       writereg(dev, PP_TxCMD, lp->send_cmd);
+       writereg(dev, PP_TxLength, skb->len);
 
+       /* Test to see if the chip has allocated memory for the packet */
+       if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
+               /* Gasp!  It hasn't.  But that shouldn't happen since
+                  we're waiting for TxOk, so return 1 and requeue this packet. */
                local_irq_restore(flags);
-               dev->trans_start = jiffies;
+               return 1;
        }
+
+       /* Write the contents of the packet */
+       skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
+                                 skb->len+1);
+
+       local_irq_restore(flags);
+       dev->trans_start = jiffies;
        dev_kfree_skb (skb);
 
        return 0;
@@ -441,9 +424,6 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
                printk ("net_interrupt(): irq %d for unknown device.\n", irq);
                return IRQ_NONE;
        }
-       if (dev->interrupt)
-               printk("%s: Re-entering the interrupt handler.\n", dev->name);
-       dev->interrupt = 1;
 
        ioaddr = dev->base_addr;
        lp = netdev_priv(dev);
@@ -464,8 +444,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
                        break;
                case ISQ_TRANSMITTER_EVENT:
                        lp->stats.tx_packets++;
-                       dev->tbusy = 0;
-                       mark_bh(NET_BH);        /* Inform upper layers. */
+                       netif_wake_queue(dev);
                        if ((status & TX_OK) == 0) lp->stats.tx_errors++;
                        if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
                        if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
@@ -479,8 +458,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
                                    That shouldn't happen since we only ever
                                    load one packet.  Shrug.  Do the right
                                    thing anyway. */
-                               dev->tbusy = 0;
-                               mark_bh(NET_BH);        /* Inform upper layers. */
+                               netif_wake_queue(dev);
                        }
                        if (status & TX_UNDERRUN) {
                                if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
@@ -497,7 +475,6 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
                        break;
                }
        }
-       dev->interrupt = 0;
        return IRQ_HANDLED;
 }
 
@@ -531,7 +508,8 @@ net_rx(struct net_device *dev)
        }
        skb_put(skb, length);
 
-       memcpy_fromio(skb->data, dev->mem_start + PP_RxFrame, length);
+       skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
+                               length);
 
        if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
                                  dev->name, length,
@@ -610,8 +588,6 @@ static void set_multicast_list(struct net_device *dev)
 static int set_mac_address(struct net_device *dev, void *addr)
 {
        int i;
-       if (dev->start)
-               return -EBUSY;
        printk("%s: Setting MAC address to ", dev->name);
        for (i = 0; i < 6; i++)
                printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);