--- /dev/null
+/* NGmemcpy.S: Niagara optimized memcpy.
+ *
+ * Copyright (C) 2006 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef __KERNEL__
+#include <asm/asi.h>
+#define GLOBAL_SPARE %g7
+#define RESTORE_ASI wr %g0, ASI_AIUS, %asi
+#else
+#define GLOBAL_SPARE %g5
+#define RESTORE_ASI
+#endif
+
+#ifndef STORE_ASI
+#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P
+#endif
+
+#ifndef EX_LD
+#define EX_LD(x) x
+#endif
+
+#ifndef EX_ST
+#define EX_ST(x) x
+#endif
+
+#ifndef EX_RETVAL
+#define EX_RETVAL(x) x
+#endif
+
+#ifndef LOAD
+#ifndef MEMCPY_DEBUG
+#define LOAD(type,addr,dest) type [addr], dest
+#else
+#define LOAD(type,addr,dest) type##a [addr] 0x80, dest
+#endif
+#endif
+
+#ifndef LOAD_TWIN
+#define LOAD_TWIN(addr_reg,dest0,dest1) \
+ ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_P, dest0
+#endif
+
+#ifndef STORE
+#define STORE(type,src,addr) type src, [addr]
+#endif
+
+#ifndef STORE_INIT
+#define STORE_INIT(src,addr) stxa src, [addr] %asi
+#endif
+
+#ifndef FUNC_NAME
+#define FUNC_NAME NGmemcpy
+#endif
+
+#ifndef PREAMBLE
+#define PREAMBLE
+#endif
+
+#ifndef XCC
+#define XCC xcc
+#endif
+
+ .register %g2,#scratch
+ .register %g3,#scratch
+
+ .text
+ .align 64
+
+ .globl FUNC_NAME
+ .type FUNC_NAME,#function
+FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
+ srlx %o2, 31, %g2
+ cmp %g2, 0
+ tne %xcc, 5
+ PREAMBLE
+ mov %o0, GLOBAL_SPARE
+ cmp %o2, 0
+ be,pn %XCC, 85f
+ or %o0, %o1, %o3
+ cmp %o2, 16
+ blu,a,pn %XCC, 80f
+ or %o3, %o2, %o3
+
+ /* 2 blocks (128 bytes) is the minimum we can do the block
+ * copy with. We need to ensure that we'll iterate at least
+ * once in the block copy loop. At worst we'll need to align
+ * the destination to a 64-byte boundary which can chew up
+ * to (64 - 1) bytes from the length before we perform the
+ * block copy loop.
+ */
+ cmp %o2, (2 * 64)
+ blu,pt %XCC, 70f
+ andcc %o3, 0x7, %g0
+
+ /* %o0: dst
+ * %o1: src
+ * %o2: len (known to be >= 128)
+ *
+ * The block copy loops will use %o4/%o5,%g2/%g3 as
+ * temporaries while copying the data.
+ */
+
+ LOAD(prefetch, %o1, #one_read)
+ wr %g0, STORE_ASI, %asi
+
+ /* Align destination on 64-byte boundary. */
+ andcc %o0, (64 - 1), %o4
+ be,pt %XCC, 2f
+ sub %o4, 64, %o4
+ sub %g0, %o4, %o4 ! bytes to align dst
+ sub %o2, %o4, %o2
+1: subcc %o4, 1, %o4
+ EX_LD(LOAD(ldub, %o1, %g1))
+ EX_ST(STORE(stb, %g1, %o0))
+ add %o1, 1, %o1
+ bne,pt %XCC, 1b
+ add %o0, 1, %o0
+
+ /* If the source is on a 16-byte boundary we can do
+ * the direct block copy loop. If it is 8-byte aligned
+ * we can do the 16-byte loads offset by -8 bytes and the
+ * init stores offset by one register.
+ *
+ * If the source is not even 8-byte aligned, we need to do
+ * shifting and masking (basically integer faligndata).
+ *
+ * The careful bit with init stores is that if we store
+ * to any part of the cache line we have to store the whole
+ * cacheline else we can end up with corrupt L2 cache line
+ * contents. Since the loop works on 64-bytes of 64-byte
+ * aligned store data at a time, this is easy to ensure.
+ */
+2:
+ andcc %o1, (16 - 1), %o4
+ andn %o2, (64 - 1), %g1 ! block copy loop iterator
+ sub %o2, %g1, %o2 ! final sub-block copy bytes
+ be,pt %XCC, 50f
+ cmp %o4, 8
+ be,a,pt %XCC, 10f
+ sub %o1, 0x8, %o1
+
+ /* Neither 8-byte nor 16-byte aligned, shift and mask. */
+ mov %g1, %o4
+ and %o1, 0x7, %g1
+ sll %g1, 3, %g1
+ mov 64, %o3
+ andn %o1, 0x7, %o1
+ EX_LD(LOAD(ldx, %o1, %g2))
+ sub %o3, %g1, %o3
+ sllx %g2, %g1, %g2
+
+#define SWIVEL_ONE_DWORD(SRC, TMP1, TMP2, PRE_VAL, PRE_SHIFT, POST_SHIFT, DST)\
+ EX_LD(LOAD(ldx, SRC, TMP1)); \
+ srlx TMP1, PRE_SHIFT, TMP2; \
+ or TMP2, PRE_VAL, TMP2; \
+ EX_ST(STORE_INIT(TMP2, DST)); \
+ sllx TMP1, POST_SHIFT, PRE_VAL;
+
+1: add %o1, 0x8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x00)
+ add %o1, 0x8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x08)
+ add %o1, 0x8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x10)
+ add %o1, 0x8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x18)
+ add %o1, 32, %o1
+ LOAD(prefetch, %o1, #one_read)
+ sub %o1, 32 - 8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x20)
+ add %o1, 8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x28)
+ add %o1, 8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x30)
+ add %o1, 8, %o1
+ SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x38)
+ subcc %o4, 64, %o4
+ bne,pt %XCC, 1b
+ add %o0, 64, %o0
+
+#undef SWIVEL_ONE_DWORD
+
+ srl %g1, 3, %g1
+ ba,pt %XCC, 60f
+ add %o1, %g1, %o1
+
+10: /* Destination is 64-byte aligned, source was only 8-byte
+ * aligned but it has been subtracted by 8 and we perform
+ * one twin load ahead, then add 8 back into source when
+ * we finish the loop.
+ */
+ EX_LD(LOAD_TWIN(%o1, %o4, %o5))
+1: add %o1, 16, %o1
+ EX_LD(LOAD_TWIN(%o1, %g2, %g3))
+ add %o1, 16 + 32, %o1
+ LOAD(prefetch, %o1, #one_read)
+ sub %o1, 32, %o1
+ EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line
+ EX_ST(STORE_INIT(%g2, %o0 + 0x08))
+ EX_LD(LOAD_TWIN(%o1, %o4, %o5))
+ add %o1, 16, %o1
+ EX_ST(STORE_INIT(%g3, %o0 + 0x10))
+ EX_ST(STORE_INIT(%o4, %o0 + 0x18))
+ EX_LD(LOAD_TWIN(%o1, %g2, %g3))
+ add %o1, 16, %o1
+ EX_ST(STORE_INIT(%o5, %o0 + 0x20))
+ EX_ST(STORE_INIT(%g2, %o0 + 0x28))
+ EX_LD(LOAD_TWIN(%o1, %o4, %o5))
+ EX_ST(STORE_INIT(%g3, %o0 + 0x30))
+ EX_ST(STORE_INIT(%o4, %o0 + 0x38))
+ subcc %g1, 64, %g1
+ bne,pt %XCC, 1b
+ add %o0, 64, %o0
+
+ ba,pt %XCC, 60f
+ add %o1, 0x8, %o1
+
+50: /* Destination is 64-byte aligned, and source is 16-byte
+ * aligned.
+ */
+1: EX_LD(LOAD_TWIN(%o1, %o4, %o5))
+ add %o1, 16, %o1
+ EX_LD(LOAD_TWIN(%o1, %g2, %g3))
+ add %o1, 16 + 32, %o1
+ LOAD(prefetch, %o1, #one_read)
+ sub %o1, 32, %o1
+ EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line
+ EX_ST(STORE_INIT(%o5, %o0 + 0x08))
+ EX_LD(LOAD_TWIN(%o1, %o4, %o5))
+ add %o1, 16, %o1
+ EX_ST(STORE_INIT(%g2, %o0 + 0x10))
+ EX_ST(STORE_INIT(%g3, %o0 + 0x18))
+ EX_LD(LOAD_TWIN(%o1, %g2, %g3))
+ add %o1, 16, %o1
+ EX_ST(STORE_INIT(%o4, %o0 + 0x20))
+ EX_ST(STORE_INIT(%o5, %o0 + 0x28))
+ EX_ST(STORE_INIT(%g2, %o0 + 0x30))
+ EX_ST(STORE_INIT(%g3, %o0 + 0x38))
+ subcc %g1, 64, %g1
+ bne,pt %XCC, 1b
+ add %o0, 64, %o0
+ /* fall through */
+
+60:
+ /* %o2 contains any final bytes still needed to be copied
+ * over. If anything is left, we copy it one byte at a time.
+ */
+ RESTORE_ASI
+ brz,pt %o2, 85f
+ sub %o0, %o1, %o3
+ ba,a,pt %XCC, 90f
+
+ .align 64
+70: /* 16 < len <= 64 */
+ bne,pn %XCC, 75f
+ sub %o0, %o1, %o3
+
+72:
+ andn %o2, 0xf, %o4
+ and %o2, 0xf, %o2
+1: subcc %o4, 0x10, %o4
+ EX_LD(LOAD(ldx, %o1, %o5))
+ add %o1, 0x08, %o1
+ EX_LD(LOAD(ldx, %o1, %g1))
+ sub %o1, 0x08, %o1
+ EX_ST(STORE(stx, %o5, %o1 + %o3))
+ add %o1, 0x8, %o1
+ EX_ST(STORE(stx, %g1, %o1 + %o3))
+ bgu,pt %XCC, 1b
+ add %o1, 0x8, %o1
+73: andcc %o2, 0x8, %g0
+ be,pt %XCC, 1f
+ nop
+ sub %o2, 0x8, %o2
+ EX_LD(LOAD(ldx, %o1, %o5))
+ EX_ST(STORE(stx, %o5, %o1 + %o3))
+ add %o1, 0x8, %o1
+1: andcc %o2, 0x4, %g0
+ be,pt %XCC, 1f
+ nop
+ sub %o2, 0x4, %o2
+ EX_LD(LOAD(lduw, %o1, %o5))
+ EX_ST(STORE(stw, %o5, %o1 + %o3))
+ add %o1, 0x4, %o1
+1: cmp %o2, 0
+ be,pt %XCC, 85f
+ nop
+ ba,pt %xcc, 90f
+ nop
+
+75:
+ andcc %o0, 0x7, %g1
+ sub %g1, 0x8, %g1
+ be,pn %icc, 2f
+ sub %g0, %g1, %g1
+ sub %o2, %g1, %o2
+
+1: subcc %g1, 1, %g1
+ EX_LD(LOAD(ldub, %o1, %o5))
+ EX_ST(STORE(stb, %o5, %o1 + %o3))
+ bgu,pt %icc, 1b
+ add %o1, 1, %o1
+
+2: add %o1, %o3, %o0
+ andcc %o1, 0x7, %g1
+ bne,pt %icc, 8f
+ sll %g1, 3, %g1
+
+ cmp %o2, 16
+ bgeu,pt %icc, 72b
+ nop
+ ba,a,pt %xcc, 73b
+
+8: mov 64, %o3
+ andn %o1, 0x7, %o1
+ EX_LD(LOAD(ldx, %o1, %g2))
+ sub %o3, %g1, %o3
+ andn %o2, 0x7, %o4
+ sllx %g2, %g1, %g2
+1: add %o1, 0x8, %o1
+ EX_LD(LOAD(ldx, %o1, %g3))
+ subcc %o4, 0x8, %o4
+ srlx %g3, %o3, %o5
+ or %o5, %g2, %o5
+ EX_ST(STORE(stx, %o5, %o0))
+ add %o0, 0x8, %o0
+ bgu,pt %icc, 1b
+ sllx %g3, %g1, %g2
+
+ srl %g1, 3, %g1
+ andcc %o2, 0x7, %o2
+ be,pn %icc, 85f
+ add %o1, %g1, %o1
+ ba,pt %xcc, 90f
+ sub %o0, %o1, %o3
+
+ .align 64
+80: /* 0 < len <= 16 */
+ andcc %o3, 0x3, %g0
+ bne,pn %XCC, 90f
+ sub %o0, %o1, %o3
+
+1:
+ subcc %o2, 4, %o2
+ EX_LD(LOAD(lduw, %o1, %g1))
+ EX_ST(STORE(stw, %g1, %o1 + %o3))
+ bgu,pt %XCC, 1b
+ add %o1, 4, %o1
+
+85: retl
+ mov EX_RETVAL(GLOBAL_SPARE), %o0
+
+ .align 32
+90:
+ subcc %o2, 1, %o2
+ EX_LD(LOAD(ldub, %o1, %g1))
+ EX_ST(STORE(stb, %g1, %o1 + %o3))
+ bgu,pt %XCC, 90b
+ add %o1, 1, %o1
+ retl
+ mov EX_RETVAL(GLOBAL_SPARE), %o0
+
+ .size FUNC_NAME, .-FUNC_NAME
projects / linux-2.6 / commitdiff