static struct sn_msi_info *sn_msi_info;
static void
-sn_msi_teardown(unsigned int vector)
+sn_msi_teardown(unsigned int irq)
{
nasid_t nasid;
int widget;
struct pcibus_bussoft *bussoft;
struct sn_pcibus_provider *provider;
- sn_irq_info = sn_msi_info[vector].sn_irq_info;
+ sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
return;
provider = SN_PCIDEV_BUSPROVIDER(pdev);
(*provider->dma_unmap)(pdev,
- sn_msi_info[vector].pci_addr,
+ sn_msi_info[irq].pci_addr,
PCI_DMA_FROMDEVICE);
- sn_msi_info[vector].pci_addr = 0;
+ sn_msi_info[irq].pci_addr = 0;
bussoft = SN_PCIDEV_BUSSOFT(pdev);
nasid = NASID_GET(bussoft->bs_base);
SWIN_WIDGETNUM(bussoft->bs_base);
sn_intr_free(nasid, widget, sn_irq_info);
- sn_msi_info[vector].sn_irq_info = NULL;
+ sn_msi_info[irq].sn_irq_info = NULL;
return;
}
int
-sn_msi_setup(struct pci_dev *pdev, unsigned int vector,
- u32 *addr_hi, u32 *addr_lo, u32 *data)
+sn_msi_setup(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
{
int widget;
int status;
if (! sn_irq_info)
return -ENOMEM;
- status = sn_intr_alloc(nasid, widget, sn_irq_info, vector, -1, -1);
+ status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1);
if (status) {
kfree(sn_irq_info);
return -ENOMEM;
return -ENOMEM;
}
- sn_msi_info[vector].sn_irq_info = sn_irq_info;
- sn_msi_info[vector].pci_addr = bus_addr;
+ sn_msi_info[irq].sn_irq_info = sn_irq_info;
+ sn_msi_info[irq].pci_addr = bus_addr;
- *addr_hi = (u32)(bus_addr >> 32);
- *addr_lo = (u32)(bus_addr & 0x00000000ffffffff);
+ msg->address_hi = (u32)(bus_addr >> 32);
+ msg->address_lo = (u32)(bus_addr & 0x00000000ffffffff);
/*
* In the SN platform, bit 16 is a "send vector" bit which
* must be present in order to move the vector through the system.
*/
- *data = 0x100 + (unsigned int)vector;
+ msg->data = 0x100 + irq;
#ifdef CONFIG_SMP
- set_irq_affinity_info((vector & 0xff), sn_irq_info->irq_cpuid, 0);
+ set_irq_affinity_info(irq, sn_irq_info->irq_cpuid, 0);
#endif
return 0;
}
static void
-sn_msi_target(unsigned int vector, unsigned int cpu,
- u32 *addr_hi, u32 *addr_lo)
+sn_msi_target(unsigned int irq, cpumask_t cpu_mask, struct msi_msg *msg)
{
int slice;
nasid_t nasid;
struct sn_irq_info *sn_irq_info;
struct sn_irq_info *new_irq_info;
struct sn_pcibus_provider *provider;
+ unsigned int cpu;
- sn_irq_info = sn_msi_info[vector].sn_irq_info;
+ cpu = first_cpu(cpu_mask);
+ sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
return;
pdev = sn_pdev->pdi_linux_pcidev;
provider = SN_PCIDEV_BUSPROVIDER(pdev);
- bus_addr = (u64)(*addr_hi) << 32 | (u64)(*addr_lo);
+ bus_addr = (u64)(msg->address_hi) << 32 | (u64)(msg->address_lo);
(*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE);
- sn_msi_info[vector].pci_addr = 0;
+ sn_msi_info[irq].pci_addr = 0;
nasid = cpuid_to_nasid(cpu);
slice = cpuid_to_slice(cpu);
new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
- sn_msi_info[vector].sn_irq_info = new_irq_info;
+ sn_msi_info[irq].sn_irq_info = new_irq_info;
if (new_irq_info == NULL)
return;
sizeof(new_irq_info->irq_xtalkaddr),
SN_DMA_MSI|SN_DMA_ADDR_XIO);
- sn_msi_info[vector].pci_addr = bus_addr;
- *addr_hi = (u32)(bus_addr >> 32);
- *addr_lo = (u32)(bus_addr & 0x00000000ffffffff);
+ sn_msi_info[irq].pci_addr = bus_addr;
+ msg->address_hi = (u32)(bus_addr >> 32);
+ msg->address_lo = (u32)(bus_addr & 0x00000000ffffffff);
}
struct msi_ops sn_msi_ops = {
+ .needs_64bit_address = 1,
.setup = sn_msi_setup,
.teardown = sn_msi_teardown,
#ifdef CONFIG_SMP
sn_msi_init(void)
{
sn_msi_info =
- kzalloc(sizeof(struct sn_msi_info) * NR_VECTORS, GFP_KERNEL);
+ kzalloc(sizeof(struct sn_msi_info) * NR_IRQS, GFP_KERNEL);
if (! sn_msi_info)
return -ENOMEM;
static void
-msi_target_apic(unsigned int vector,
- unsigned int dest_cpu,
- u32 *address_hi, /* in/out */
- u32 *address_lo) /* in/out */
+msi_target_apic(unsigned int irq, cpumask_t cpu_mask, struct msi_msg *msg)
{
- u32 addr = *address_lo;
+ u32 addr = msg->address_lo;
addr &= MSI_ADDR_DESTID_MASK;
- addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(dest_cpu));
+ addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(first_cpu(cpu_mask)));
- *address_lo = addr;
+ msg->address_lo = addr;
}
static int
msi_setup_apic(struct pci_dev *pdev, /* unused in generic */
- unsigned int vector,
- u32 *address_hi,
- u32 *address_lo,
- u32 *data)
+ unsigned int irq,
+ struct msi_msg *msg)
{
unsigned long dest_phys_id;
+ unsigned int vector;
dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map));
+ vector = irq;
- *address_hi = 0;
- *address_lo = MSI_ADDR_HEADER |
- MSI_ADDR_DESTMODE_PHYS |
- MSI_ADDR_REDIRECTION_CPU |
- MSI_ADDR_DESTID_CPU(dest_phys_id);
+ msg->address_hi = 0;
+ msg->address_lo =
+ MSI_ADDR_HEADER |
+ MSI_ADDR_DESTMODE_PHYS |
+ MSI_ADDR_REDIRECTION_CPU |
+ MSI_ADDR_DESTID_CPU(dest_phys_id);
- *data = MSI_DATA_TRIGGER_EDGE |
+ msg->data =
+ MSI_DATA_TRIGGER_EDGE |
MSI_DATA_LEVEL_ASSERT |
MSI_DATA_DELIVERY_FIXED |
MSI_DATA_VECTOR(vector);
}
static void
-msi_teardown_apic(unsigned int vector)
+msi_teardown_apic(unsigned int irq)
{
return; /* no-op */
}
*/
struct msi_ops msi_apic_ops = {
+ .needs_64bit_address = 0,
.setup = msi_setup_apic,
.teardown = msi_teardown_apic,
.target = msi_target_apic,
}
#ifdef CONFIG_SMP
-static void set_msi_affinity(unsigned int vector, cpumask_t cpu_mask)
+static void set_msi_affinity(unsigned int irq, cpumask_t cpu_mask)
{
struct msi_desc *entry;
struct msi_msg msg;
- unsigned int irq = vector;
- unsigned int dest_cpu = first_cpu(cpu_mask);
- entry = (struct msi_desc *)msi_desc[vector];
+ entry = msi_desc[irq];
if (!entry || !entry->dev)
return;
read_msi_msg(entry, &msg);
- msi_ops->target(vector, dest_cpu, &msg.address_hi, &msg.address_lo);
+ msi_ops->target(irq, cpu_mask, &msg);
write_msi_msg(entry, &msg);
set_native_irq_info(irq, cpu_mask);
}
{
int status;
struct msi_msg msg;
- int pos, vector = dev->irq;
+ int pos;
u16 control;
pos = entry->msi_attrib.pos;
pci_read_config_word(dev, msi_control_reg(pos), &control);
/* Configure MSI capability structure */
- status = msi_ops->setup(dev, vector, &msg.address_hi, &msg.address_lo, &msg.data);
+ status = msi_ops->setup(dev, dev->irq, &msg);
if (status < 0)
return status;
/* Replace with MSI-X handler */
irq_handler_init(PCI_CAP_ID_MSIX, vector, 1);
/* Configure MSI-X capability structure */
- status = msi_ops->setup(dev, vector,
- &msg.address_hi,
- &msg.address_lo,
- &msg.data);
+ status = msi_ops->setup(dev, vector, &msg);
if (status < 0)
break;
int pci_enable_msi(struct pci_dev* dev)
{
int pos, temp, status;
+ u16 control;
if (pci_msi_supported(dev) < 0)
return -EINVAL;
if (!pos)
return -EINVAL;
+ pci_read_config_word(dev, msi_control_reg(pos), &control);
+ if (!is_64bit_address(control) && msi_ops->needs_64bit_address)
+ return -EINVAL;
+
WARN_ON(!msi_lookup_vector(dev, PCI_CAP_ID_MSI));
/* Check whether driver already requested for MSI-X vectors */
#ifndef MSI_H
#define MSI_H
-/*
- * MSI operation vector. Used by the msi core code (drivers/pci/msi.c)
- * to abstract platform-specific tasks relating to MSI address generation
- * and resource management.
- */
-struct msi_ops {
- /**
- * setup - generate an MSI bus address and data for a given vector
- * @pdev: PCI device context (in)
- * @vector: vector allocated by the msi core (in)
- * @addr_hi: upper 32 bits of PCI bus MSI address (out)
- * @addr_lo: lower 32 bits of PCI bus MSI address (out)
- * @data: MSI data payload (out)
- *
- * Description: The setup op is used to generate a PCI bus addres and
- * data which the msi core will program into the card MSI capability
- * registers. The setup routine is responsible for picking an initial
- * cpu to target the MSI at. The setup routine is responsible for
- * examining pdev to determine the MSI capabilities of the card and
- * generating a suitable address/data. The setup routine is
- * responsible for allocating and tracking any system resources it
- * needs to route the MSI to the cpu it picks, and for associating
- * those resources with the passed in vector.
- *
- * Returns 0 if the MSI address/data was successfully setup.
- **/
-
- int (*setup) (struct pci_dev *pdev, unsigned int vector,
- u32 *addr_hi, u32 *addr_lo, u32 *data);
-
- /**
- * teardown - release resources allocated by setup
- * @vector: vector context for resources (in)
- *
- * Description: The teardown op is used to release any resources
- * that were allocated in the setup routine associated with the passed
- * in vector.
- **/
-
- void (*teardown) (unsigned int vector);
-
- /**
- * target - retarget an MSI at a different cpu
- * @vector: vector context for resources (in)
- * @cpu: new cpu to direct vector at (in)
- * @addr_hi: new value of PCI bus upper 32 bits (in/out)
- * @addr_lo: new value of PCI bus lower 32 bits (in/out)
- *
- * Description: The target op is used to redirect an MSI vector
- * at a different cpu. addr_hi/addr_lo coming in are the existing
- * values that the MSI core has programmed into the card. The
- * target code is responsible for freeing any resources (if any)
- * associated with the old address, and generating a new PCI bus
- * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
- **/
-
- void (*target) (unsigned int vector, unsigned int cpu,
- u32 *addr_hi, u32 *addr_lo);
-};
-
-extern int msi_register(struct msi_ops *ops);
-
#include <asm/msi.h>
/*
struct msix_entry *entries, int nvec);
extern void pci_disable_msix(struct pci_dev *dev);
extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
+
+/*
+ * MSI operation vector. Used by the msi core code (drivers/pci/msi.c)
+ * to abstract platform-specific tasks relating to MSI address generation
+ * and resource management.
+ */
+struct msi_ops {
+ int needs_64bit_address;
+ /**
+ * setup - generate an MSI bus address and data for a given vector
+ * @pdev: PCI device context (in)
+ * @irq: irq allocated by the msi core (in)
+ * @msg: PCI bus address and data for msi message (out)
+ *
+ * Description: The setup op is used to generate a PCI bus addres and
+ * data which the msi core will program into the card MSI capability
+ * registers. The setup routine is responsible for picking an initial
+ * cpu to target the MSI at. The setup routine is responsible for
+ * examining pdev to determine the MSI capabilities of the card and
+ * generating a suitable address/data. The setup routine is
+ * responsible for allocating and tracking any system resources it
+ * needs to route the MSI to the cpu it picks, and for associating
+ * those resources with the passed in vector.
+ *
+ * Returns 0 if the MSI address/data was successfully setup.
+ **/
+
+ int (*setup) (struct pci_dev *pdev, unsigned int irq,
+ struct msi_msg *msg);
+
+ /**
+ * teardown - release resources allocated by setup
+ * @vector: vector context for resources (in)
+ *
+ * Description: The teardown op is used to release any resources
+ * that were allocated in the setup routine associated with the passed
+ * in vector.
+ **/
+
+ void (*teardown) (unsigned int irq);
+
+ /**
+ * target - retarget an MSI at a different cpu
+ * @vector: vector context for resources (in)
+ * @cpu: new cpu to direct vector at (in)
+ * @addr_hi: new value of PCI bus upper 32 bits (in/out)
+ * @addr_lo: new value of PCI bus lower 32 bits (in/out)
+ *
+ * Description: The target op is used to redirect an MSI vector
+ * at a different cpu. addr_hi/addr_lo coming in are the existing
+ * values that the MSI core has programmed into the card. The
+ * target code is responsible for freeing any resources (if any)
+ * associated with the old address, and generating a new PCI bus
+ * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
+ **/
+
+ void (*target) (unsigned int irq, cpumask_t cpumask,
+ struct msi_msg *msg);
+};
+
+extern int msi_register(struct msi_ops *ops);
+
#endif
extern void pci_block_user_cfg_access(struct pci_dev *dev);
projects / linux-2.6 / commitdiff