]> err.no Git - linux-2.6/commitdiff
[MMC] Fix SD timeout calculation
authorPierre Ossman <drzeus@drzeus.cx>
Sun, 18 Jun 2006 12:34:37 +0000 (14:34 +0200)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 7 Sep 2006 12:18:40 +0000 (13:18 +0100)
Secure Digital cards use a different algorithm to calculate the timeout
for data transfers. Using the MMC one works often, but not always.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/mmc/mmc.c
drivers/mmc/mmc_block.c

index 33525bdf2ab617fb4e5cd861f9d38a5d82dcde63..c0c7ef2a8b28aff4bad45d666bd2b26d24a250a5 100644 (file)
@@ -912,6 +912,7 @@ static void mmc_read_scrs(struct mmc_host *host)
        struct mmc_request mrq;
        struct mmc_command cmd;
        struct mmc_data data;
+       unsigned int timeout_us;
 
        struct scatterlist sg;
 
@@ -947,8 +948,18 @@ static void mmc_read_scrs(struct mmc_host *host)
 
                memset(&data, 0, sizeof(struct mmc_data));
 
-               data.timeout_ns = card->csd.tacc_ns * 10;
-               data.timeout_clks = card->csd.tacc_clks * 10;
+               data.timeout_ns = card->csd.tacc_ns * 100;
+               data.timeout_clks = card->csd.tacc_clks * 100;
+
+               timeout_us = data.timeout_ns / 1000;
+               timeout_us += data.timeout_clks * 1000 /
+                       (host->ios.clock / 1000);
+
+               if (timeout_us > 100000) {
+                       data.timeout_ns = 100000000;
+                       data.timeout_clks = 0;
+               }
+
                data.blksz_bits = 3;
                data.blksz = 1 << 3;
                data.blocks = 1;
index 115cc21094b941a243d323756f127f905b14e0bf..515fb227eba7456f3f55486525ade577401a345f 100644 (file)
@@ -30,6 +30,7 @@
 #include <linux/mutex.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 
 #include <asm/system.h>
@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
                brq.cmd.arg = req->sector << 9;
                brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-               brq.data.timeout_ns = card->csd.tacc_ns * 10;
-               brq.data.timeout_clks = card->csd.tacc_clks * 10;
                brq.data.blksz_bits = md->block_bits;
                brq.data.blksz = 1 << md->block_bits;
                brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
@@ -180,6 +179,41 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                brq.stop.arg = 0;
                brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
+               brq.data.timeout_ns = card->csd.tacc_ns * 10;
+               brq.data.timeout_clks = card->csd.tacc_clks * 10;
+
+               /*
+                * Scale up the timeout by the r2w factor
+                */
+               if (rq_data_dir(req) == WRITE) {
+                       brq.data.timeout_ns <<= card->csd.r2w_factor;
+                       brq.data.timeout_clks <<= card->csd.r2w_factor;
+               }
+
+               /*
+                * SD cards use a 100 multiplier and has a upper limit
+                */
+               if (mmc_card_sd(card)) {
+                       unsigned int limit_us, timeout_us;
+
+                       brq.data.timeout_ns *= 10;
+                       brq.data.timeout_clks *= 10;
+
+                       if (rq_data_dir(req) == READ)
+                               limit_us = 100000;
+                       else
+                               limit_us = 250000;
+
+                       timeout_us = brq.data.timeout_ns / 1000;
+                       timeout_us += brq.data.timeout_clks * 1000 /
+                               (card->host->ios.clock / 1000);
+
+                       if (timeout_us > limit_us) {
+                               brq.data.timeout_ns = limit_us * 1000;
+                               brq.data.timeout_clks = 0;
+                       }
+               }
+
                if (rq_data_dir(req) == READ) {
                        brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
                        brq.data.flags |= MMC_DATA_READ;
@@ -187,12 +221,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                        brq.cmd.opcode = MMC_WRITE_BLOCK;
                        brq.data.flags |= MMC_DATA_WRITE;
                        brq.data.blocks = 1;
-
-                       /*
-                        * Scale up the timeout by the r2w factor
-                        */
-                       brq.data.timeout_ns <<= card->csd.r2w_factor;
-                       brq.data.timeout_clks <<= card->csd.r2w_factor;
                }
 
                if (brq.data.blocks > 1) {