Based on earlier work by Jon Smirl and Jochen Friedrich.
Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0x68),
- .type = "ds1307",
+ I2C_BOARD_INFO("ds1307", 0x68),
},
};
I2C_BOARD_INFO("x9429", 0x28),
},
{
- I2C_BOARD_INFO("at24c", 0x50),
- .type = "24c1024",
+ I2C_BOARD_INFO("24c1024", 0x50),
}
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
{
- I2C_BOARD_INFO("at24c", 0x50),
- .type = "24c512",
+ I2C_BOARD_INFO("24c512", 0x50),
},
};
*/
static struct i2c_board_info __initdata em7210_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-rs5c372", 0x32),
- .type = "rs5c372a",
+ I2C_BOARD_INFO("rs5c372a", 0x32),
},
};
static struct i2c_board_info __initdata glantank_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-rs5c372", 0x32),
- .type = "rs5c372a",
+ I2C_BOARD_INFO("rs5c372a", 0x32),
},
{
I2C_BOARD_INFO("f75375", 0x2e),
- .type = "f75375",
.platform_data = &glantank_f75375s,
},
};
static struct i2c_board_info __initdata n2100_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-rs5c372", 0x32),
- .type = "rs5c372b",
+ I2C_BOARD_INFO("rs5c372b", 0x32),
},
{
I2C_BOARD_INFO("f75375", 0x2e),
- .type = "f75375",
.platform_data = &n2100_f75375s,
},
};
static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
{
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
{
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
{
- I2C_BOARD_INFO("rtc-x1205", 0x6f),
+ I2C_BOARD_INFO("x1205", 0x6f),
},
};
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
- .type = "tps65010",
.irq = OMAP_GPIO_IRQ(58),
}, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .type = "isp1301_omap",
.irq = OMAP_GPIO_IRQ(2),
},
};
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
- I2C_BOARD_INFO("tps65010", 0x48),
- .type = "tps65013",
+ I2C_BOARD_INFO("tps65013", 0x48),
/* .irq = OMAP_GPIO_IRQ(??), */
},
};
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
- .type = "tps65010",
.irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
.platform_data = &tps_board,
* RTC DS1339 on I2C bus
****************************************************************************/
static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
- .driver_name = "rtc-ds1307",
- .type = "ds1339",
- .addr = 0x68,
+ I2C_BOARD_INFO("ds1339", 0x68),
};
/*****************************************************************************
static struct i2c_board_info __initdata dns323_i2c_devices[] = {
{
I2C_BOARD_INFO("g760a", 0x3e),
- .type = "g760a",
},
#if 0
/* this entry requires the new-style driver model lm75 driver,
* for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
{
- I2C_BOARD_INFO("lm75", 0x48),
- .type = "g751",
+ I2C_BOARD_INFO("g751", 0x48),
},
#endif
{
- I2C_BOARD_INFO("rtc-m41t80", 0x68),
- .type = "m41t80",
+ I2C_BOARD_INFO("m41t80", 0x68),
}
};
* RTC 5C372a on I2C bus
****************************************************************************/
static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
- .driver_name = "rtc-rs5c372",
- .type = "rs5c372a",
- .addr = 0x32,
+ I2C_BOARD_INFO("rs5c372a", 0x32),
};
/*****************************************************************************
* RTC DS1338 on I2C bus
****************************************************************************/
static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
- .driver_name = "rtc-ds1307",
- .type = "ds1338",
- .addr = 0x68,
+ I2C_BOARD_INFO("ds1338", 0x68),
};
/*****************************************************************************
#define TS209_RTC_GPIO 3
static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
- .driver_name = "rtc-s35390a",
- .addr = 0x30,
+ I2C_BOARD_INFO("s35390a", 0x30),
.irq = 0,
};
static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
{
/* Must initialize before the camera(s) */
- I2C_BOARD_INFO("pca953x", 0x41),
- .type = "pca9536",
+ I2C_BOARD_INFO("pca9536", 0x41),
.platform_data = &pca9536_data,
}, {
I2C_BOARD_INFO("mt9v022", 0x48),
- .type = "mt9v022",
.platform_data = &iclink[0], /* With extender */
}, {
I2C_BOARD_INFO("mt9m001", 0x5d),
- .type = "mt9m001",
.platform_data = &iclink[0], /* With extender */
},
};
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
- .type = "ad7142_joystick",
.irq = 39,
},
#endif
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- .type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
- .type = "pcf8574_keypad",
.irq = 39,
},
#endif
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
- .type = "ad7142_joystick",
.irq = 55,
},
#endif
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- .type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
- .type = "pcf8574_keypad",
.irq = 72,
},
#endif
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- .type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
- .type = "pcf8574_keypad",
.irq = 212,
},
#endif
#include <linux/i2c.h>
struct i2c_driver_device {
char *of_device;
- char *i2c_driver;
char *i2c_type;
};
static struct i2c_driver_device i2c_devices[] __initdata = {
- {"ricoh,rs5c372a", "rtc-rs5c372", "rs5c372a",},
- {"ricoh,rs5c372b", "rtc-rs5c372", "rs5c372b",},
- {"ricoh,rv5c386", "rtc-rs5c372", "rv5c386",},
- {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",},
- {"dallas,ds1307", "rtc-ds1307", "ds1307",},
- {"dallas,ds1337", "rtc-ds1307", "ds1337",},
- {"dallas,ds1338", "rtc-ds1307", "ds1338",},
- {"dallas,ds1339", "rtc-ds1307", "ds1339",},
- {"dallas,ds1340", "rtc-ds1307", "ds1340",},
- {"stm,m41t00", "rtc-ds1307", "m41t00"},
- {"dallas,ds1374", "rtc-ds1374", "rtc-ds1374",},
+ {"ricoh,rs5c372a", "rs5c372a"},
+ {"ricoh,rs5c372b", "rs5c372b"},
+ {"ricoh,rv5c386", "rv5c386"},
+ {"ricoh,rv5c387a", "rv5c387a"},
+ {"dallas,ds1307", "ds1307"},
+ {"dallas,ds1337", "ds1337"},
+ {"dallas,ds1338", "ds1338"},
+ {"dallas,ds1339", "ds1339"},
+ {"dallas,ds1340", "ds1340"},
+ {"stm,m41t00", "m41t00"},
+ {"dallas,ds1374", "rtc-ds1374"},
};
static int __init of_find_i2c_driver(struct device_node *node,
for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
if (!of_device_is_compatible(node, i2c_devices[i].of_device))
continue;
- if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver,
- KOBJ_NAME_LEN) >= KOBJ_NAME_LEN ||
- strlcpy(info->type, i2c_devices[i].i2c_type,
+ if (strlcpy(info->type, i2c_devices[i].i2c_type,
I2C_NAME_SIZE) >= I2C_NAME_SIZE)
return -ENOMEM;
return 0;
static struct i2c_board_info __initdata migor_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-rs5c372", 0x32),
- .type = "rs5c372b",
+ I2C_BOARD_INFO("rs5c372b", 0x32),
},
{
I2C_BOARD_INFO("migor_ts", 0x51),
static struct i2c_board_info __initdata highlander_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-rs5c372", 0x32),
- .type = "r2025sd",
+ I2C_BOARD_INFO("r2025sd", 0x32),
},
};
#define PCA953X_INVERT 2
#define PCA953X_DIRECTION 3
-/* This is temporary - in 2.6.26 i2c_driver_data should replace it. */
-struct pca953x_desc {
- char name[I2C_NAME_SIZE];
- unsigned long driver_data;
-};
-
-static const struct pca953x_desc pca953x_descs[] = {
+static const struct i2c_device_id pca953x_id[] = {
{ "pca9534", 8, },
{ "pca9535", 16, },
{ "pca9536", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
/* REVISIT several pca955x parts should work here too */
+ { }
};
+MODULE_DEVICE_TABLE(i2c, pca953x_id);
struct pca953x_chip {
unsigned gpio_start;
}
static int __devinit pca953x_probe(struct i2c_client *client,
- const struct i2c_device_id *did)
+ const struct i2c_device_id *id)
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int ret, i;
- const struct pca953x_desc *id = NULL;
pdata = client->dev.platform_data;
if (pdata == NULL)
return -ENODEV;
- /* this loop vanishes when we get i2c_device_id */
- for (i = 0; i < ARRAY_SIZE(pca953x_descs); i++)
- if (!strcmp(pca953x_descs[i].name, client->name)) {
- id = pca953x_descs + i;
- break;
- }
- if (!id)
- return -ENODEV;
-
chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
},
.probe = pca953x_probe,
.remove = pca953x_remove,
+ .id_table = pca953x_id,
};
static int __init pca953x_init(void)
#include <asm/gpio.h>
+static const struct i2c_device_id pcf857x_id[] = {
+ { "pcf8574", 8 },
+ { "pca8574", 8 },
+ { "pca9670", 8 },
+ { "pca9672", 8 },
+ { "pca9674", 8 },
+ { "pcf8575", 16 },
+ { "pca8575", 16 },
+ { "pca9671", 16 },
+ { "pca9673", 16 },
+ { "pca9675", 16 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf857x_id);
+
/*
* The pcf857x, pca857x, and pca967x chips only expose one read and one
* write register. Writing a "one" bit (to match the reset state) lets
*
* NOTE: we don't distinguish here between *4 and *4a parts.
*/
- if (strcmp(client->name, "pcf8574") == 0
- || strcmp(client->name, "pca8574") == 0
- || strcmp(client->name, "pca9670") == 0
- || strcmp(client->name, "pca9672") == 0
- || strcmp(client->name, "pca9674") == 0
- ) {
- gpio->chip.ngpio = 8;
+ gpio->chip.ngpio = id->driver_data;
+ if (gpio->chip.ngpio == 8) {
gpio->chip.direction_input = pcf857x_input8;
gpio->chip.get = pcf857x_get8;
gpio->chip.direction_output = pcf857x_output8;
*
* NOTE: we don't distinguish here between '75 and '75c parts.
*/
- } else if (strcmp(client->name, "pcf8575") == 0
- || strcmp(client->name, "pca8575") == 0
- || strcmp(client->name, "pca9671") == 0
- || strcmp(client->name, "pca9673") == 0
- || strcmp(client->name, "pca9675") == 0
- ) {
- gpio->chip.ngpio = 16;
+ } else if (gpio->chip.ngpio == 16) {
gpio->chip.direction_input = pcf857x_input16;
gpio->chip.get = pcf857x_get16;
gpio->chip.direction_output = pcf857x_output16;
},
.probe = pcf857x_probe,
.remove = pcf857x_remove,
+ .id_table = pcf857x_id,
};
static int __init pcf857x_init(void)
.detach_client = f75375_detach_client,
};
+static const struct i2c_device_id f75375_id[] = {
+ { "f75373", f75373 },
+ { "f75375", f75375 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, f75375_id);
+
static struct i2c_driver f75375_driver = {
.driver = {
.name = "f75375",
},
.probe = f75375_probe,
.remove = f75375_remove,
+ .id_table = f75375_id,
};
static inline int f75375_read8(struct i2c_client *client, u8 reg)
i2c_set_clientdata(client, data);
data->client = client;
mutex_init(&data->update_lock);
-
- if (strcmp(client->name, "f75375") == 0)
- data->kind = f75375;
- else if (strcmp(client->name, "f75373") == 0)
- data->kind = f75373;
- else {
- dev_err(&client->dev, "Unsupported device: %s\n", client->name);
- return -ENODEV;
- }
+ data->kind = id->driver_data;
if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
goto exit_free;
u8 version = 0;
int err = 0;
const char *name = "";
+ struct i2c_device_id id;
if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) {
err = -ENOMEM;
if ((err = i2c_attach_client(client)))
goto exit_free;
- if ((err = f75375_probe(client, NULL)) < 0)
+ strlcpy(id.name, name, I2C_NAME_SIZE);
+ id.driver_data = kind;
+ if ((err = f75375_probe(client, &id)) < 0)
goto exit_detach;
return 0;
/* TAOS TSL2550 EVM */
static struct i2c_board_info tsl2550_info = {
I2C_BOARD_INFO("tsl2550", 0x39),
- .type = "tsl2550",
};
/* Instantiate i2c devices based on the adapter name */
{
if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
- tsl2550_info.driver_name, tsl2550_info.addr);
+ tsl2550_info.type, tsl2550_info.addr);
return i2c_new_device(adapter, &tsl2550_info);
}
return 0;
}
+static const struct i2c_device_id ds1682_id[] = {
+ { "ds1682", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1682_id);
+
static struct i2c_driver ds1682_driver = {
.driver = {
.name = "ds1682",
},
.probe = ds1682_probe,
.remove = ds1682_remove,
+ .id_table = ds1682_id,
};
static int __init ds1682_init(void)
return 0;
}
+static const struct i2c_device_id menelaus_id[] = {
+ { "menelaus", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, menelaus_id);
+
static struct i2c_driver menelaus_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
},
.probe = menelaus_probe,
.remove = __exit_p(menelaus_remove),
+ .id_table = menelaus_id,
};
static int __init menelaus_init(void)
* as part of board setup by a bootloader.
*/
enum tps_model {
- TPS_UNKNOWN = 0,
TPS65010,
TPS65011,
TPS65012,
mutex_init(&tps->lock);
INIT_DELAYED_WORK(&tps->work, tps65010_work);
tps->client = client;
-
- if (strcmp(client->name, "tps65010") == 0)
- tps->model = TPS65010;
- else if (strcmp(client->name, "tps65011") == 0)
- tps->model = TPS65011;
- else if (strcmp(client->name, "tps65012") == 0)
- tps->model = TPS65012;
- else if (strcmp(client->name, "tps65013") == 0)
- tps->model = TPS65013;
- else {
- dev_warn(&client->dev, "unknown chip '%s'\n", client->name);
- status = -ENODEV;
- goto fail1;
- }
+ tps->model = id->driver_data;
/* the IRQ is active low, but many gpio lines can't support that
* so this driver uses falling-edge triggers instead.
case TPS65012:
tps->por = 1;
break;
- case TPS_UNKNOWN:
- printk(KERN_WARNING "%s: unknown TPS chip\n", DRIVER_NAME);
- break;
/* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
}
tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
return status;
}
+static const struct i2c_device_id tps65010_id[] = {
+ { "tps65010", TPS65010 },
+ { "tps65011", TPS65011 },
+ { "tps65012", TPS65012 },
+ { "tps65013", TPS65013 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps65010_id);
+
static struct i2c_driver tps65010_driver = {
.driver = {
.name = "tps65010",
},
.probe = tps65010_probe,
.remove = __exit_p(tps65010_remove),
+ .id_table = tps65010_id,
};
/*-------------------------------------------------------------------------*/
#endif /* CONFIG_PM */
+static const struct i2c_device_id tsl2550_id[] = {
+ { "tsl2550", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tsl2550_id);
+
static struct i2c_driver tsl2550_driver = {
.driver = {
.name = TSL2550_DRV_NAME,
.resume = tsl2550_resume,
.probe = tsl2550_probe,
.remove = __devexit_p(tsl2550_remove),
+ .id_table = tsl2550_id,
};
static int __init tsl2550_init(void)
return 0;
}
+static const struct i2c_device_id mt9m001_id[] = {
+ { "mt9m001", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9m001_id);
+
static struct i2c_driver mt9m001_i2c_driver = {
.driver = {
.name = "mt9m001",
},
.probe = mt9m001_probe,
.remove = mt9m001_remove,
+ .id_table = mt9m001_id,
};
static int __init mt9m001_mod_init(void)
return 0;
}
+static const struct i2c_device_id mt9v022_id[] = {
+ { "mt9v022", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v022_id);
+
static struct i2c_driver mt9v022_i2c_driver = {
.driver = {
.name = "mt9v022",
},
.probe = mt9v022_probe,
.remove = mt9v022_remove,
+ .id_table = mt9v022_id,
};
static int __init mt9v022_mod_init(void)
};
struct chip_desc {
- char name[9];
unsigned nvram56:1;
unsigned alarm:1;
- enum ds_type type;
};
-static const struct chip_desc chips[] = { {
- .name = "ds1307",
- .type = ds_1307,
+static const struct chip_desc chips[] = {
+[ds_1307] = {
.nvram56 = 1,
-}, {
- .name = "ds1337",
- .type = ds_1337,
+},
+[ds_1337] = {
.alarm = 1,
-}, {
- .name = "ds1338",
- .type = ds_1338,
+},
+[ds_1338] = {
.nvram56 = 1,
-}, {
- .name = "ds1339",
- .type = ds_1339,
+},
+[ds_1339] = {
.alarm = 1,
-}, {
- .name = "ds1340",
- .type = ds_1340,
-}, {
- .name = "m41t00",
- .type = m41t00,
+},
+[ds_1340] = {
+},
+[m41t00] = {
}, };
-static inline const struct chip_desc *find_chip(const char *s)
-{
- unsigned i;
-
- for (i = 0; i < ARRAY_SIZE(chips); i++)
- if (strnicmp(s, chips[i].name, sizeof chips[i].name) == 0)
- return &chips[i];
- return NULL;
-}
+static const struct i2c_device_id ds1307_id[] = {
+ { "ds1307", ds_1307 },
+ { "ds1337", ds_1337 },
+ { "ds1338", ds_1338 },
+ { "ds1339", ds_1339 },
+ { "ds1340", ds_1340 },
+ { "m41t00", m41t00 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1307_id);
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307;
int err = -ENODEV;
int tmp;
- const struct chip_desc *chip;
+ const struct chip_desc *chip = &chips[id->driver_data];
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- chip = find_chip(client->name);
- if (!chip) {
- dev_err(&client->dev, "unknown chip type '%s'\n",
- client->name);
- return -ENODEV;
- }
-
if (!i2c_check_functionality(adapter,
I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
ds1307->msg[1].len = sizeof(ds1307->regs);
ds1307->msg[1].buf = ds1307->regs;
- ds1307->type = chip->type;
+ ds1307->type = id->driver_data;
switch (ds1307->type) {
case ds_1337:
},
.probe = ds1307_probe,
.remove = __devexit_p(ds1307_remove),
+ .id_table = ds1307_id,
};
static int __init ds1307_init(void)
#define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
#define DS1374_REG_TCR 0x09 /* Trickle Charge */
+static const struct i2c_device_id ds1374_id[] = {
+ { "rtc-ds1374", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1374_id);
+
struct ds1374 {
struct i2c_client *client;
struct rtc_device *rtc;
},
.probe = ds1374_probe,
.remove = __devexit_p(ds1374_remove),
+ .id_table = ds1374_id,
};
static int __init ds1374_init(void)
return 0;
}
+static const struct i2c_device_id isl1208_id[] = {
+ { "isl1208", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, isl1208_id);
+
static struct i2c_driver isl1208_driver = {
.driver = {
.name = "rtc-isl1208",
},
.probe = isl1208_probe,
.remove = isl1208_remove,
+ .id_table = isl1208_id,
};
static int __init
#define DRV_VERSION "0.05"
-struct m41t80_chip_info {
- const char *name;
- u8 features;
-};
-
-static const struct m41t80_chip_info m41t80_chip_info_tbl[] = {
- {
- .name = "m41t80",
- .features = 0,
- },
- {
- .name = "m41t81",
- .features = M41T80_FEATURE_HT,
- },
- {
- .name = "m41t81s",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
- {
- .name = "m41t82",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
- {
- .name = "m41t83",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
- {
- .name = "m41st84",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
- {
- .name = "m41st85",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
- {
- .name = "m41st87",
- .features = M41T80_FEATURE_HT | M41T80_FEATURE_BL,
- },
+static const struct i2c_device_id m41t80_id[] = {
+ { "m41t80", 0 },
+ { "m41t81", M41T80_FEATURE_HT },
+ { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { }
};
+MODULE_DEVICE_TABLE(i2c, m41t80_id);
struct m41t80_data {
- const struct m41t80_chip_info *chip;
+ u8 features;
struct rtc_device *rtc;
};
struct m41t80_data *clientdata = i2c_get_clientdata(client);
u8 reg;
- if (clientdata->chip->features & M41T80_FEATURE_BL) {
+ if (clientdata->features & M41T80_FEATURE_BL) {
reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
seq_printf(seq, "battery\t\t: %s\n",
(reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok");
static int m41t80_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int i, rc = 0;
+ int rc = 0;
struct rtc_device *rtc = NULL;
struct rtc_time tm;
- const struct m41t80_chip_info *chip;
struct m41t80_data *clientdata = NULL;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C
dev_info(&client->dev,
"chip found, driver version " DRV_VERSION "\n");
- chip = NULL;
- for (i = 0; i < ARRAY_SIZE(m41t80_chip_info_tbl); i++) {
- if (!strcmp(m41t80_chip_info_tbl[i].name, client->name)) {
- chip = &m41t80_chip_info_tbl[i];
- break;
- }
- }
- if (!chip) {
- dev_err(&client->dev, "%s is not supported\n", client->name);
- rc = -ENODEV;
- goto exit;
- }
-
clientdata = kzalloc(sizeof(*clientdata), GFP_KERNEL);
if (!clientdata) {
rc = -ENOMEM;
}
clientdata->rtc = rtc;
- clientdata->chip = chip;
+ clientdata->features = id->driver_data;
i2c_set_clientdata(client, clientdata);
/* Make sure HT (Halt Update) bit is cleared */
goto ht_err;
if (rc & M41T80_ALHOUR_HT) {
- if (chip->features & M41T80_FEATURE_HT) {
+ if (clientdata->features & M41T80_FEATURE_HT) {
m41t80_get_datetime(client, &tm);
dev_info(&client->dev, "HT bit was set!\n");
dev_info(&client->dev,
goto exit;
#ifdef CONFIG_RTC_DRV_M41T80_WDT
- if (chip->features & M41T80_FEATURE_HT) {
+ if (clientdata->features & M41T80_FEATURE_HT) {
rc = misc_register(&wdt_dev);
if (rc)
goto exit;
struct rtc_device *rtc = clientdata->rtc;
#ifdef CONFIG_RTC_DRV_M41T80_WDT
- if (clientdata->chip->features & M41T80_FEATURE_HT) {
+ if (clientdata->features & M41T80_FEATURE_HT) {
misc_deregister(&wdt_dev);
unregister_reboot_notifier(&wdt_notifier);
}
},
.probe = m41t80_probe,
.remove = m41t80_remove,
+ .id_table = m41t80_id,
};
static int __init m41t80_rtc_init(void)
return 0;
}
+static const struct i2c_device_id pcf8563_id[] = {
+ { "pcf8563", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8563_id);
+
static struct i2c_driver pcf8563_driver = {
.driver = {
.name = "rtc-pcf8563",
},
.probe = pcf8563_probe,
.remove = pcf8563_remove,
+ .id_table = pcf8563_id,
};
static int __init pcf8563_init(void)
rtc_rv5c387a,
};
+static const struct i2c_device_id rs5c372_id[] = {
+ { "rs5c372a", rtc_rs5c372a },
+ { "rs5c372b", rtc_rs5c372b },
+ { "rv5c386", rtc_rv5c386 },
+ { "rv5c387a", rtc_rv5c387a },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rs5c372_id);
+
/* REVISIT: this assumes that:
* - we're in the 21st century, so it's safe to ignore the century
* bit for rv5c38[67] (REG_MONTH bit 7);
rs5c372->client = client;
i2c_set_clientdata(client, rs5c372);
+ rs5c372->type = id->driver_data;
/* we read registers 0x0f then 0x00-0x0f; skip the first one */
rs5c372->regs = &rs5c372->buf[1];
if (err < 0)
goto exit_kfree;
- if (strcmp(client->name, "rs5c372a") == 0)
- rs5c372->type = rtc_rs5c372a;
- else if (strcmp(client->name, "rs5c372b") == 0)
- rs5c372->type = rtc_rs5c372b;
- else if (strcmp(client->name, "rv5c386") == 0)
- rs5c372->type = rtc_rv5c386;
- else if (strcmp(client->name, "rv5c387a") == 0)
- rs5c372->type = rtc_rv5c387a;
- else {
- rs5c372->type = rtc_rs5c372b;
- dev_warn(&client->dev, "assuming rs5c372b\n");
- }
-
/* clock may be set for am/pm or 24 hr time */
switch (rs5c372->type) {
case rtc_rs5c372a:
},
.probe = rs5c372_probe,
.remove = rs5c372_remove,
+ .id_table = rs5c372_id,
};
static __init int rs5c372_init(void)
#define S35390A_FLAG_RESET 0x80
#define S35390A_FLAG_TEST 0x01
+static const struct i2c_device_id s35390a_id[] = {
+ { "s35390a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, s35390a_id);
+
struct s35390a {
struct i2c_client *client[8];
struct rtc_device *rtc;
},
.probe = s35390a_probe,
.remove = s35390a_remove,
+ .id_table = s35390a_id,
};
static int __init s35390a_rtc_init(void)
return 0;
}
+static const struct i2c_device_id x1205_id[] = {
+ { "x1205", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, x1205_id);
+
static struct i2c_driver x1205_driver = {
.driver = {
.name = "rtc-x1205",
},
.probe = x1205_probe,
.remove = x1205_remove,
+ .id_table = x1205_id,
};
static int __init x1205_init(void)
};
/**
- * I2C_BOARD_INFO - macro used to list an i2c device and its driver
- * @driver: identifies the driver to use with the device
+ * I2C_BOARD_INFO - macro used to list an i2c device and its address
+ * @dev_type: identifies the device type
* @dev_addr: the device's address on the bus.
*
* This macro initializes essential fields of a struct i2c_board_info,
* declaring what has been provided on a particular board. Optional
- * fields (such as the chip type, its associated irq, or device-specific
- * platform_data) are provided using conventional syntax.
+ * fields (such as associated irq, or device-specific platform_data)
+ * are provided using conventional syntax.
*/
-#define I2C_BOARD_INFO(driver,dev_addr) \
- .driver_name = (driver), .addr = (dev_addr)
+#define I2C_BOARD_INFO(dev_type,dev_addr) \
+ .type = (dev_type), .addr = (dev_addr)
/* Add-on boards should register/unregister their devices; e.g. a board
projects / linux-2.6 / commitdiff