+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BEECH is not set
-# CONFIG_CEDAR is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-CONFIG_OAK=y
-# CONFIG_REDWOOD_4 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_TIVO is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR51=y
-CONFIG_403GCX=y
-# CONFIG_405_DMA is not set
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_OAKNET=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# IBM 40x options
-#
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
help
This option enables support for the EP405/EP405PC boards.
-config OAK
- bool "Oak"
- help
- This option enables support for the IBM 403GCX evaluation board.
-
config REDWOOD_5
bool "Redwood-5"
help
depends on BUBINGA || EP405 || SYCAMORE || WALNUT
default y
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
depends OAK
obj-$(CONFIG_EP405) += ep405.o
obj-$(CONFIG_BUBINGA) += bubinga.o
obj-$(CONFIG_LUAN) += luan.o
-obj-$(CONFIG_OAK) += oak.o
obj-$(CONFIG_OCOTEA) += ocotea.o
obj-$(CONFIG_REDWOOD_5) += redwood5.o
obj-$(CONFIG_REDWOOD_6) += redwood6.o
+++ /dev/null
-/*
- *
- * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: oak.c
- *
- * Description:
- * Architecture- / platform-specific boot-time initialization code for
- * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/initrd.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-
-#include <asm/board.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/time.h>
-
-#include "oak.h"
-
-/* Function Prototypes */
-
-extern void abort(void);
-
-/* Global Variables */
-
-unsigned char __res[sizeof(bd_t)];
-
-
-/*
- * void __init oak_init()
- *
- * Description:
- * This routine...
- *
- * Input(s):
- * r3 - Optional pointer to a board information structure.
- * r4 - Optional pointer to the physical starting address of the init RAM
- * disk.
- * r5 - Optional pointer to the physical ending address of the init RAM
- * disk.
- * r6 - Optional pointer to the physical starting address of any kernel
- * command-line parameters.
- * r7 - Optional pointer to the physical ending address of any kernel
- * command-line parameters.
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * N/A
- *
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
- }
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *)(r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *)(r6 + KERNELBASE));
- }
-
- /* Initialize machine-dependency vectors */
-
- ppc_md.setup_arch = oak_setup_arch;
- ppc_md.show_percpuinfo = oak_show_percpuinfo;
- ppc_md.irq_canonicalize = NULL;
- ppc_md.init_IRQ = ppc4xx_pic_init;
- ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
- ppc_md.init = NULL;
-
- ppc_md.restart = oak_restart;
- ppc_md.power_off = oak_power_off;
- ppc_md.halt = oak_halt;
-
- ppc_md.time_init = oak_time_init;
- ppc_md.set_rtc_time = oak_set_rtc_time;
- ppc_md.get_rtc_time = oak_get_rtc_time;
- ppc_md.calibrate_decr = oak_calibrate_decr;
-}
-
-/*
- * Document me.
- */
-void __init
-oak_setup_arch(void)
-{
- /* XXX - Implement me */
-}
-
-/*
- * int oak_show_percpuinfo()
- *
- * Description:
- * This routine pretty-prints the platform's internal CPU and bus clock
- * frequencies into the buffer for usage in /proc/cpuinfo.
- *
- * Input(s):
- * *buffer - Buffer into which CPU and bus clock frequencies are to be
- * printed.
- *
- * Output(s):
- * *buffer - Buffer with the CPU and bus clock frequencies.
- *
- * Returns:
- * The number of bytes copied into 'buffer' if OK, otherwise zero or less
- * on error.
- */
-int
-oak_show_percpuinfo(struct seq_file *m, int i)
-{
- bd_t *bp = (bd_t *)__res;
-
- seq_printf(m, "clock\t\t: %dMHz\n"
- "bus clock\t\t: %dMHz\n",
- bp->bi_intfreq / 1000000,
- bp->bi_busfreq / 1000000);
-
- return 0;
-}
-
-/*
- * Document me.
- */
-void
-oak_restart(char *cmd)
-{
- abort();
-}
-
-/*
- * Document me.
- */
-void
-oak_power_off(void)
-{
- oak_restart(NULL);
-}
-
-/*
- * Document me.
- */
-void
-oak_halt(void)
-{
- oak_restart(NULL);
-}
-
-/*
- * Document me.
- */
-long __init
-oak_time_init(void)
-{
- /* XXX - Implement me */
- return 0;
-}
-
-/*
- * Document me.
- */
-int __init
-oak_set_rtc_time(unsigned long time)
-{
- /* XXX - Implement me */
-
- return (0);
-}
-
-/*
- * Document me.
- */
-unsigned long __init
-oak_get_rtc_time(void)
-{
- /* XXX - Implement me */
-
- return (0);
-}
-
-/*
- * void __init oak_calibrate_decr()
- *
- * Description:
- * This routine retrieves the internal processor frequency from the board
- * information structure, sets up the kernel timer decrementer based on
- * that value, enables the 403 programmable interval timer (PIT) and sets
- * it up for auto-reload.
- *
- * Input(s):
- * N/A
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * N/A
- *
- */
-void __init
-oak_calibrate_decr(void)
-{
- unsigned int freq;
- bd_t *bip = (bd_t *)__res;
-
- freq = bip->bi_intfreq;
-
- decrementer_count = freq / HZ;
- count_period_num = 1;
- count_period_den = freq;
-
- /* Enable the PIT and set auto-reload of its value */
-
- mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
- /* Clear any pending timer interrupts */
-
- mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-}
+++ /dev/null
-/*
- *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: oak.h
- *
- * Description:
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 403G{A,B,C,CX} "Oak" evaluation board. Anything specific to the pro-
- * cessor itself is defined elsewhere.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_OAK_H__
-#define __ASM_OAK_H__
-
-/* We have an IBM 403G{A,B,C,CX} core */
-#include <asm/ibm403.h>
-
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-
-/* Memory map for the "Oak" evaluation board */
-
-#define PPC403SPU_IO_BASE 0x40000000 /* 403 On-chip serial port */
-#define PPC403SPU_IO_SIZE 0x00000008
-#define OAKSERIAL_IO_BASE 0x7E000000 /* NS16550DV serial port */
-#define OAKSERIAL_IO_SIZE 0x00000008
-#define OAKNET_IO_BASE 0xF4000000 /* NS83902AV Ethernet */
-#define OAKNET_IO_SIZE 0x00000040
-#define OAKPROM_IO_BASE 0xFFFE0000 /* AMD 29F010 Flash ROM */
-#define OAKPROM_IO_SIZE 0x00020000
-
-
-/* Interrupt assignments fixed by the hardware implementation */
-
-/* This is annoying kbuild-2.4 problem. -- Tom */
-
-#define PPC403SPU_RX_INT 4 /* AIC_INT4 */
-#define PPC403SPU_TX_INT 5 /* AIC_INT5 */
-#define OAKNET_INT 27 /* AIC_INT27 */
-#define OAKSERIAL_INT 28 /* AIC_INT28 */
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Oak" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
- unsigned int bi_memsize; /* DRAM installed, in bytes */
- unsigned char bi_enetaddr[6]; /* Ethernet MAC address */
- unsigned int bi_intfreq; /* Processor speed, in Hz */
- unsigned int bi_busfreq; /* Bus speed, in Hz */
-} bd_t;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern void oak_init(unsigned long r3,
- unsigned long ird_start,
- unsigned long ird_end,
- unsigned long cline_start,
- unsigned long cline_end);
-extern void oak_setup_arch(void);
-extern int oak_setup_residual(char *buffer);
-extern void oak_init_IRQ(void);
-extern int oak_get_irq(struct pt_regs *regs);
-extern void oak_restart(char *cmd);
-extern void oak_power_off(void);
-extern void oak_halt(void);
-extern void oak_time_init(void);
-extern int oak_set_rtc_time(unsigned long now);
-extern unsigned long oak_get_rtc_time(void);
-extern void oak_calibrate_decr(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-#define PPC4xx_MACHINE_NAME "IBM Oak"
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_OAK_H__ */
-#endif /* __KERNEL__ */
+++ /dev/null
-/*
- *
- * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: oak_setup.h
- *
- * Description:
- * Architecture- / platform-specific boot-time initialization code for
- * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek
- * <dan@netx4.com>.
- *
- */
-
-#ifndef __OAK_SETUP_H__
-#define __OAK_SETUP_H__
-
-#include <asm/ptrace.h>
-#include <asm/board.h>
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern unsigned char __res[sizeof(bd_t)];
-
-extern void oak_init(unsigned long r3,
- unsigned long ird_start,
- unsigned long ird_end,
- unsigned long cline_start,
- unsigned long cline_end);
-extern void oak_setup_arch(void);
-extern int oak_setup_residual(char *buffer);
-extern void oak_init_IRQ(void);
-extern int oak_get_irq(struct pt_regs *regs);
-extern void oak_restart(char *cmd);
-extern void oak_power_off(void);
-extern void oak_halt(void);
-extern void oak_time_init(void);
-extern int oak_set_rtc_time(unsigned long now);
-extern unsigned long oak_get_rtc_time(void);
-extern void oak_calibrate_decr(void);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __OAK_SETUP_H__ */
#include <platforms/4xx/ep405.h>
#endif
-#if defined(CONFIG_OAK)
-#include <platforms/4xx/oak.h>
-#endif
-
#if defined(CONFIG_REDWOOD_4)
#include <platforms/4xx/redwood.h>
#endif
projects / linux-2.6 / commitdiff