[PATCH] I2C: Missing space in split strings

A few split string in i2c (and now hwmon) drivers lack a joining space,
causing them to display incorrectly. This trivial patch fixes that up.
Please apply, thanks.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 3c85fe150cd754831f989f88151a14b5e77482ae..4fa17c76eea2247dae603e5ca124cfe58775b0f1 100644 (file)
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
 
        value = data->config3;
        if (data->config3 & CFG3_GPIO16_ENABLE) {
-               dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+               dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
                        "pin disabled.\n");
        } else {
                dev_dbg(&client->dev, "THERM pin enabled.  "

diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index bf553dcd97d68f0e853586a67f675afed8b263f2..3c159f1d49ee3e6e0bf6b8acd5ccbfa8093ec938 100644 (file)
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
        i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
        "Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");

diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 876c68f3af31e4e80fbc5263ad47e97b650ea4a5..fa4032d53b790b3e08dd6fdf6d730e4258ae05e5 100644 (file)
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
        if (init >= 2 && data->innr) {
                reg = pc87360_read_value(data, LD_IN, NO_BANK,
                                         PC87365_REG_IN_CONVRATE);
-               dev_info(&client->dev, "VLM conversion set to"
+               dev_info(&client->dev, "VLM conversion set to "
                         "1s period, 160us delay\n");
                pc87360_write_value(data, LD_IN, NO_BANK,
                                    PC87365_REG_IN_CONVRATE,

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 0ab7e37f5b00282359be9b83d8df1f911783ab74..1ab41313ce5186d72f3a7398295dee8524576b0a 100644 (file)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
                pci_read_config_word(I801_dev, SMBBA, &i801_smba);
                i801_smba &= 0xfff0;
                if(i801_smba == 0) {
-                       dev_err(&dev->dev, "SMB base address uninitialized"
+                       dev_err(&dev->dev, "SMB base address uninitialized "
                                "- upgrade BIOS or use force_addr=0xaddr\n");
                        return -ENODEV;
                }
@@ -186,7 +186,7 @@ static int i801_transaction(void)
        int result = 0;
        int timeout = 0;
 
-       dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+       dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
                "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
                inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
                inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@ static int i801_transaction(void)
                outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
        if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-               dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+               dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
                        "(%02x)\n", temp);
        }
        dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "