]> err.no Git - linux-2.6/commitdiff
[SERIAL] sunzilog: Convert to of_driver.
authorDavid S. Miller <davem@davemloft.net>
Thu, 29 Jun 2006 22:13:17 +0000 (15:13 -0700)
committerDavid S. Miller <davem@sunset.davemloft.net>
Thu, 29 Jun 2006 23:37:42 +0000 (16:37 -0700)
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/serial/sunzilog.c

index 9f42677287ad55836455b3820370a828471ff947..cbdf9d605b3fd5ab1525347d944efedc8d2d35b4 100644 (file)
@@ -1,5 +1,4 @@
-/*
- * sunzilog.c
+/* sunzilog.c: Zilog serial driver for Sparc systems.
  *
  * Driver for Zilog serial chips found on Sun workstations and
  * servers.  This driver could actually be made more generic.
@@ -10,7 +9,7 @@
  * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
  * work there.
  *
- *  Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ *  Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/config.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#ifdef CONFIG_SPARC64
-#include <asm/fhc.h>
-#endif
-#include <asm/sbus.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -65,7 +62,7 @@
 #define ZSDELAY()
 #define ZSDELAY_LONG()
 #define ZS_WSYNC(__channel) \
-       sbus_readb(&((__channel)->control))
+       readb(&((__channel)->control))
 #endif
 
 static int num_sunzilog;
@@ -107,7 +104,7 @@ struct uart_sunzilog_port {
        unsigned char                   prev_status;
 
 #ifdef CONFIG_SERIO
-       struct serio                    *serio;
+       struct serio                    serio;
        int                             serio_open;
 #endif
 };
@@ -138,9 +135,9 @@ static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
 {
        unsigned char retval;
 
-       sbus_writeb(reg, &channel->control);
+       writeb(reg, &channel->control);
        ZSDELAY();
-       retval = sbus_readb(&channel->control);
+       retval = readb(&channel->control);
        ZSDELAY();
 
        return retval;
@@ -149,9 +146,9 @@ static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
 static void write_zsreg(struct zilog_channel __iomem *channel,
                        unsigned char reg, unsigned char value)
 {
-       sbus_writeb(reg, &channel->control);
+       writeb(reg, &channel->control);
        ZSDELAY();
-       sbus_writeb(value, &channel->control);
+       writeb(value, &channel->control);
        ZSDELAY();
 }
 
@@ -162,17 +159,17 @@ static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
        for (i = 0; i < 32; i++) {
                unsigned char regval;
 
-               regval = sbus_readb(&channel->control);
+               regval = readb(&channel->control);
                ZSDELAY();
                if (regval & Rx_CH_AV)
                        break;
 
                regval = read_zsreg(channel, R1);
-               sbus_readb(&channel->data);
+               readb(&channel->data);
                ZSDELAY();
 
                if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
-                       sbus_writeb(ERR_RES, &channel->control);
+                       writeb(ERR_RES, &channel->control);
                        ZSDELAY();
                        ZS_WSYNC(channel);
                }
@@ -194,7 +191,7 @@ static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *
                udelay(100);
        }
 
-       sbus_writeb(ERR_RES, &channel->control);
+       writeb(ERR_RES, &channel->control);
        ZSDELAY();
        ZS_WSYNC(channel);
 
@@ -291,7 +288,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
                /* Stop-A is handled by drivers/char/keyboard.c now. */
 #ifdef CONFIG_SERIO
                if (up->serio_open)
-                       serio_interrupt(up->serio, ch, 0, regs);
+                       serio_interrupt(&up->serio, ch, 0, regs);
 #endif
        } else if (ZS_IS_MOUSE(up)) {
                int ret = suncore_mouse_baud_detection(ch, is_break);
@@ -306,7 +303,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
                case 0:
 #ifdef CONFIG_SERIO
                        if (up->serio_open)
-                               serio_interrupt(up->serio, ch, 0, regs);
+                               serio_interrupt(&up->serio, ch, 0, regs);
 #endif
                        break;
                };
@@ -330,12 +327,12 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
 
                r1 = read_zsreg(channel, R1);
                if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
-                       sbus_writeb(ERR_RES, &channel->control);
+                       writeb(ERR_RES, &channel->control);
                        ZSDELAY();
                        ZS_WSYNC(channel);
                }
 
-               ch = sbus_readb(&channel->control);
+               ch = readb(&channel->control);
                ZSDELAY();
 
                /* This funny hack depends upon BRK_ABRT not interfering
@@ -347,7 +344,7 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
                if (!(ch & Rx_CH_AV))
                        break;
 
-               ch = sbus_readb(&channel->data);
+               ch = readb(&channel->data);
                ZSDELAY();
 
                ch &= up->parity_mask;
@@ -406,10 +403,10 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 {
        unsigned char status;
 
-       status = sbus_readb(&channel->control);
+       status = readb(&channel->control);
        ZSDELAY();
 
-       sbus_writeb(RES_EXT_INT, &channel->control);
+       writeb(RES_EXT_INT, &channel->control);
        ZSDELAY();
        ZS_WSYNC(channel);
 
@@ -421,7 +418,7 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
                         * confusing the PROM.
                         */
                        while (1) {
-                               status = sbus_readb(&channel->control);
+                               status = readb(&channel->control);
                                ZSDELAY();
                                if (!(status & BRK_ABRT))
                                        break;
@@ -458,7 +455,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
        struct circ_buf *xmit;
 
        if (ZS_IS_CONS(up)) {
-               unsigned char status = sbus_readb(&channel->control);
+               unsigned char status = readb(&channel->control);
                ZSDELAY();
 
                /* TX still busy?  Just wait for the next TX done interrupt.
@@ -487,7 +484,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 
        if (up->port.x_char) {
                up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
-               sbus_writeb(up->port.x_char, &channel->data);
+               writeb(up->port.x_char, &channel->data);
                ZSDELAY();
                ZS_WSYNC(channel);
 
@@ -506,7 +503,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
                goto ack_tx_int;
 
        up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
-       sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+       writeb(xmit->buf[xmit->tail], &channel->data);
        ZSDELAY();
        ZS_WSYNC(channel);
 
@@ -519,7 +516,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
        return;
 
 ack_tx_int:
-       sbus_writeb(RES_Tx_P, &channel->control);
+       writeb(RES_Tx_P, &channel->control);
        ZSDELAY();
        ZS_WSYNC(channel);
 }
@@ -540,7 +537,7 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *reg
                /* Channel A */
                tty = NULL;
                if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
-                       sbus_writeb(RES_H_IUS, &channel->control);
+                       writeb(RES_H_IUS, &channel->control);
                        ZSDELAY();
                        ZS_WSYNC(channel);
 
@@ -563,7 +560,7 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *reg
                spin_lock(&up->port.lock);
                tty = NULL;
                if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
-                       sbus_writeb(RES_H_IUS, &channel->control);
+                       writeb(RES_H_IUS, &channel->control);
                        ZSDELAY();
                        ZS_WSYNC(channel);
 
@@ -594,7 +591,7 @@ static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *p
        unsigned char status;
 
        channel = ZILOG_CHANNEL_FROM_PORT(port);
-       status = sbus_readb(&channel->control);
+       status = readb(&channel->control);
        ZSDELAY();
 
        return status;
@@ -682,7 +679,7 @@ static void sunzilog_start_tx(struct uart_port *port)
        up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
        up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
 
-       status = sbus_readb(&channel->control);
+       status = readb(&channel->control);
        ZSDELAY();
 
        /* TX busy?  Just wait for the TX done interrupt.  */
@@ -693,7 +690,7 @@ static void sunzilog_start_tx(struct uart_port *port)
         * IRQ sending engine.
         */
        if (port->x_char) {
-               sbus_writeb(port->x_char, &channel->data);
+               writeb(port->x_char, &channel->data);
                ZSDELAY();
                ZS_WSYNC(channel);
 
@@ -702,7 +699,7 @@ static void sunzilog_start_tx(struct uart_port *port)
        } else {
                struct circ_buf *xmit = &port->info->xmit;
 
-               sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+               writeb(xmit->buf[xmit->tail], &channel->data);
                ZSDELAY();
                ZS_WSYNC(channel);
 
@@ -779,7 +776,7 @@ static void __sunzilog_startup(struct uart_sunzilog_port *up)
        struct zilog_channel __iomem *channel;
 
        channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
-       up->prev_status = sbus_readb(&channel->control);
+       up->prev_status = readb(&channel->control);
 
        /* Enable receiver and transmitter.  */
        up->curregs[R3] |= RxENAB;
@@ -963,7 +960,7 @@ sunzilog_set_termios(struct uart_port *port, struct termios *termios,
 
 static const char *sunzilog_type(struct uart_port *port)
 {
-       return "SunZilog";
+       return "zs";
 }
 
 /* We do not request/release mappings of the registers here, this
@@ -1012,7 +1009,6 @@ static struct uart_sunzilog_port *sunzilog_port_table;
 static struct zilog_layout __iomem **sunzilog_chip_regs;
 
 static struct uart_sunzilog_port *sunzilog_irq_chain;
-static int zilog_irq = -1;
 
 static struct uart_driver sunzilog_reg = {
        .owner          =       THIS_MODULE,
@@ -1021,232 +1017,47 @@ static struct uart_driver sunzilog_reg = {
        .major          =       TTY_MAJOR,
 };
 
-static void * __init alloc_one_table(unsigned long size)
+static int __init sunzilog_alloc_tables(void)
 {
-       void *ret;
-
-       ret = kmalloc(size, GFP_KERNEL);
-       if (ret != NULL)
-               memset(ret, 0, size);
+       struct uart_sunzilog_port *up;
+       unsigned long size;
+       int i;
 
-       return ret;
-}
+       size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port);
+       sunzilog_port_table = kzalloc(size, GFP_KERNEL);
+       if (!sunzilog_port_table)
+               return -ENOMEM;
 
-static void __init sunzilog_alloc_tables(void)
-{
-       sunzilog_port_table = 
-               alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
-       sunzilog_chip_regs = 
-               alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *));
-
-       if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) {
-               prom_printf("SunZilog: Cannot allocate tables.\n");
-               prom_halt();
-       }
-}
+       for (i = 0; i < NUM_CHANNELS; i++) {
+               up = &sunzilog_port_table[i];
 
-#ifdef CONFIG_SPARC64
+               spin_lock_init(&up->port.lock);
 
-/* We used to attempt to use the address property of the Zilog device node
- * but that totally is not necessary on sparc64.
- */
-static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
-{
-       void __iomem *mapped_addr;
-       unsigned int sun4u_ino;
-       struct sbus_bus *sbus = NULL;
-       struct sbus_dev *sdev = NULL;
-       int err;
+               if (i == 0)
+                       sunzilog_irq_chain = up;
 
-       if (central_bus == NULL) {
-               for_each_sbus(sbus) {
-                       for_each_sbusdev(sdev, sbus) {
-                               if (sdev->prom_node == zsnode)
-                                       goto found;
-                       }
-               }
-       }
- found:
-       if (sdev == NULL && central_bus == NULL) {
-               prom_printf("SunZilog: sdev&&central == NULL for "
-                           "Zilog %d in get_zs_sun4u.\n", chip);
-               prom_halt();
-       }
-       if (central_bus == NULL) {
-               mapped_addr =
-                       sbus_ioremap(&sdev->resource[0], 0,
-                                    PAGE_SIZE,
-                                    "Zilog Registers");
-       } else {
-               struct linux_prom_registers zsregs[1];
-
-               err = prom_getproperty(zsnode, "reg",
-                                      (char *) &zsregs[0],
-                                      sizeof(zsregs));
-               if (err == -1) {
-                       prom_printf("SunZilog: Cannot map "
-                                   "Zilog %d regs on "
-                                   "central bus.\n", chip);
-                       prom_halt();
-               }
-               apply_fhc_ranges(central_bus->child,
-                                &zsregs[0], 1);
-               apply_central_ranges(central_bus, &zsregs[0], 1);
-               mapped_addr = (void __iomem *)
-                       ((((u64)zsregs[0].which_io)<<32UL) |
-                       ((u64)zsregs[0].phys_addr));
+               if (i < NUM_CHANNELS - 1)
+                       up->next = up + 1;
+               else
+                       up->next = NULL;
        }
 
-       if (zilog_irq == -1) {
-               if (central_bus) {
-                       unsigned long iclr, imap;
-
-                       iclr = central_bus->child->fhc_regs.uregs
-                               + FHC_UREGS_ICLR;
-                       imap = central_bus->child->fhc_regs.uregs
-                               + FHC_UREGS_IMAP;
-                       zilog_irq = build_irq(0, iclr, imap);
-               } else {
-                       err = prom_getproperty(zsnode, "interrupts",
-                                              (char *) &sun4u_ino,
-                                              sizeof(sun4u_ino));
-                       zilog_irq = sbus_build_irq(sbus_root, sun4u_ino);
-               }
+       size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *);
+       sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
+       if (!sunzilog_chip_regs) {
+               kfree(sunzilog_port_table);
+               sunzilog_irq_chain = NULL;
+               return -ENOMEM;
        }
 
-       return (struct zilog_layout __iomem *) mapped_addr;
+       return 0;
 }
-#else /* CONFIG_SPARC64 */
 
-/*
- * XXX The sun4d case is utterly screwed: it tries to re-walk the tree
- * (for the 3rd time) in order to find bootbus and cpu. Streamline it.
- */
-static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node)
+static void sunzilog_free_tables(void)
 {
-       struct linux_prom_irqs irq_info[2];
-       void __iomem *mapped_addr = NULL;
-       int zsnode, cpunode, bbnode;
-       struct linux_prom_registers zsreg[4];
-       struct resource res;
-
-       if (sparc_cpu_model == sun4d) {
-               int walk;
-
-               zsnode = 0;
-               bbnode = 0;
-               cpunode = 0;
-               for (walk = prom_getchild(prom_root_node);
-                    (walk = prom_searchsiblings(walk, "cpu-unit")) != 0;
-                    walk = prom_getsibling(walk)) {
-                       bbnode = prom_getchild(walk);
-                       if (bbnode &&
-                           (bbnode = prom_searchsiblings(bbnode, "bootbus"))) {
-                               if ((zsnode = prom_getchild(bbnode)) == node) {
-                                       cpunode = walk;
-                                       break;
-                               }
-                       }
-               }
-               if (!walk) {
-                       prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n",
-                                   (chip / 2));
-                       prom_halt();
-               }
-
-               if (prom_getproperty(zsnode, "reg",
-                                    (char *) zsreg, sizeof(zsreg)) == -1) {
-                       prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
-                       prom_halt();
-               }
-               /* XXX Looks like an off by one? */
-               prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1);
-               res.start = zsreg[0].phys_addr;
-               res.end = res.start + (8 - 1);
-               res.flags = zsreg[0].which_io | IORESOURCE_IO;
-               mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
-
-       } else {
-               zsnode = node;
-
-#if 0 /* XXX When was this used? */
-               if (prom_getintdefault(zsnode, "slave", -1) != chipid) {
-                       zsnode = prom_getsibling(zsnode);
-                       continue;
-               }
-#endif
-
-               /*
-                * "address" is only present on ports that OBP opened
-                * (from Mitch Bradley's "Hitchhiker's Guide to OBP").
-                * We do not use it.
-                */
-
-               if (prom_getproperty(zsnode, "reg",
-                                    (char *) zsreg, sizeof(zsreg)) == -1) {
-                       prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
-                       prom_halt();
-               }
-               if (sparc_cpu_model == sun4m)   /* Crude. Pass parent. XXX */
-                       prom_apply_obio_ranges(zsreg, 1);
-               res.start = zsreg[0].phys_addr;
-               res.end = res.start + (8 - 1);
-               res.flags = zsreg[0].which_io | IORESOURCE_IO;
-               mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
-       }
-
-       if (prom_getproperty(zsnode, "intr",
-                            (char *) irq_info, sizeof(irq_info))
-                   % sizeof(struct linux_prom_irqs)) {
-               prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n",
-                           chip);
-               prom_halt();
-       }
-       if (zilog_irq == -1) {
-               zilog_irq = irq_info[0].pri;
-       } else if (zilog_irq != irq_info[0].pri) {
-               /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */
-               prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
-                           chip);
-               prom_halt();
-       }
-
-       return (struct zilog_layout __iomem *) mapped_addr;
-}
-#endif /* !(CONFIG_SPARC64) */
-
-/* Get the address of the registers for SunZilog instance CHIP.  */
-static struct zilog_layout __iomem * __init get_zs(int chip, int node)
-{
-       if (chip < 0 || chip >= NUM_SUNZILOG) {
-               prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip);
-               prom_halt();
-       }
-
-#ifdef CONFIG_SPARC64
-       return get_zs_sun4u(chip, node);
-#else
-
-       if (sparc_cpu_model == sun4) {
-               struct resource res;
-
-               /* Not probe-able, hard code it. */
-               switch (chip) {
-               case 0:
-                       res.start = 0xf1000000;
-                       break;
-               case 1:
-                       res.start = 0xf0000000;
-                       break;
-               };
-               zilog_irq = 12;
-               res.end = (res.start + (8 - 1));
-               res.flags = IORESOURCE_IO;
-               return sbus_ioremap(&res, 0, 8, "SunZilog");
-       }
-
-       return get_zs_sun4cmd(chip, node);
-#endif
+       kfree(sunzilog_port_table);
+       sunzilog_irq_chain = NULL;
+       kfree(sunzilog_chip_regs);
 }
 
 #define ZS_PUT_CHAR_MAX_DELAY  2000    /* 10 ms */
@@ -1260,7 +1071,7 @@ static void sunzilog_putchar(struct uart_port *port, int ch)
         * udelay with ZSDELAY as that is a NOP on some platforms.  -DaveM
         */
        do {
-               unsigned char val = sbus_readb(&channel->control);
+               unsigned char val = readb(&channel->control);
                if (val & Tx_BUF_EMP) {
                        ZSDELAY();
                        break;
@@ -1268,7 +1079,7 @@ static void sunzilog_putchar(struct uart_port *port, int ch)
                udelay(5);
        } while (--loops);
 
-       sbus_writeb(ch, &channel->data);
+       writeb(ch, &channel->data);
        ZSDELAY();
        ZS_WSYNC(channel);
 }
@@ -1385,28 +1196,6 @@ static struct console sunzilog_console = {
        .data   =       &sunzilog_reg,
 };
 
-static int __init sunzilog_console_init(void)
-{
-       int i;
-
-       if (con_is_present())
-               return 0;
-
-       for (i = 0; i < NUM_CHANNELS; i++) {
-               int this_minor = sunzilog_reg.minor + i;
-
-               if ((this_minor - 64) == (serial_console - 1))
-                       break;
-       }
-       if (i == NUM_CHANNELS)
-               return 0;
-
-       sunzilog_console.index = i;
-       sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
-       register_console(&sunzilog_console);
-       return 0;
-}
-
 static inline struct console *SUNZILOG_CONSOLE(void)
 {
        int i;
@@ -1431,101 +1220,8 @@ static inline struct console *SUNZILOG_CONSOLE(void)
 
 #else
 #define SUNZILOG_CONSOLE()     (NULL)
-#define sunzilog_console_init() do { } while (0)
 #endif
 
-/*
- * We scan the PROM tree recursively. This is the most reliable way
- * to find Zilog nodes on various platforms. However, we face an extreme
- * shortage of kernel stack, so we must be very careful. To that end,
- * we scan only to a certain depth, and we use a common property buffer
- * in the scan structure.
- */
-#define ZS_PROPSIZE  128
-#define ZS_SCAN_DEPTH  5
-
-struct zs_probe_scan {
-       int depth;
-       void (*scanner)(struct zs_probe_scan *t, int node);
-
-       int devices;
-       char prop[ZS_PROPSIZE];
-};
-
-static int __inline__ sunzilog_node_ok(int node, const char *name, int len)
-{
-       if (strncmp(name, "zs", len) == 0)
-               return 1;
-       /* Don't fold this procedure just yet. Compare to su_node_ok(). */
-       return 0;
-}
-
-static void __init sunzilog_scan(struct zs_probe_scan *t, int node)
-{
-       int len;
-
-       for (; node != 0; node = prom_getsibling(node)) {
-               len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE);
-               if (len <= 1)
-                       continue;               /* Broken PROM node */
-               if (sunzilog_node_ok(node, t->prop, len)) {
-                       (*t->scanner)(t, node);
-               } else {
-                       if (t->depth < ZS_SCAN_DEPTH) {
-                               t->depth++;
-                               sunzilog_scan(t, prom_getchild(node));
-                               --t->depth;
-                       }
-               }
-       }
-}
-
-static void __init sunzilog_prepare(void)
-{
-       struct uart_sunzilog_port *up;
-       struct zilog_layout __iomem *rp;
-       int channel, chip;
-
-       /*
-        * Temporary fix.
-        */
-       for (channel = 0; channel < NUM_CHANNELS; channel++)
-               spin_lock_init(&sunzilog_port_table[channel].port.lock);
-
-       sunzilog_irq_chain = up = &sunzilog_port_table[0];
-       for (channel = 0; channel < NUM_CHANNELS - 1; channel++)
-               up[channel].next = &up[channel + 1];
-       up[channel].next = NULL;
-
-       for (chip = 0; chip < NUM_SUNZILOG; chip++) {
-               rp = sunzilog_chip_regs[chip];
-               up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA;
-               up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
-
-               /* Channel A */
-               up[(chip * 2) + 0].port.iotype = UPIO_MEM;
-               up[(chip * 2) + 0].port.irq = zilog_irq;
-               up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
-               up[(chip * 2) + 0].port.fifosize = 1;
-               up[(chip * 2) + 0].port.ops = &sunzilog_pops;
-               up[(chip * 2) + 0].port.type = PORT_SUNZILOG;
-               up[(chip * 2) + 0].port.flags = 0;
-               up[(chip * 2) + 0].port.line = (chip * 2) + 0;
-               up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
-
-               /* Channel B */
-               up[(chip * 2) + 1].port.iotype = UPIO_MEM;
-               up[(chip * 2) + 1].port.irq = zilog_irq;
-               up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
-               up[(chip * 2) + 1].port.fifosize = 1;
-               up[(chip * 2) + 1].port.ops = &sunzilog_pops;
-               up[(chip * 2) + 1].port.type = PORT_SUNZILOG;
-               up[(chip * 2) + 1].port.flags = 0;
-               up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-               up[(chip * 2) + 1].flags |= 0;
-       }
-}
-
 static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
 {
        int baud, brg;
@@ -1539,8 +1235,6 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
                up->cflag = B4800 | CS8 | CLOCAL | CREAD;
                baud = 4800;
        }
-       printk(KERN_INFO "zs%d at 0x%p (irq = %d) is a SunZilog\n",
-              channel, up->port.membase, zilog_irq);
 
        up->curregs[R15] = BRKIE;
        brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
@@ -1552,216 +1246,253 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 #ifdef CONFIG_SERIO
 static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
 {
-       struct serio *serio;
-
-       up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
-       if (serio) {
-               memset(serio, 0, sizeof(*serio));
+       struct serio *serio = &up->serio;
 
-               serio->port_data = up;
+       serio->port_data = up;
 
-               serio->id.type = SERIO_RS232;
-               if (channel == KEYBOARD_LINE) {
-                       serio->id.proto = SERIO_SUNKBD;
-                       strlcpy(serio->name, "zskbd", sizeof(serio->name));
-               } else {
-                       serio->id.proto = SERIO_SUN;
-                       serio->id.extra = 1;
-                       strlcpy(serio->name, "zsms", sizeof(serio->name));
-               }
-               strlcpy(serio->phys,
-                       (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
-                       sizeof(serio->phys));
-
-               serio->write = sunzilog_serio_write;
-               serio->open = sunzilog_serio_open;
-               serio->close = sunzilog_serio_close;
-
-               serio_register_port(serio);
+       serio->id.type = SERIO_RS232;
+       if (channel == KEYBOARD_LINE) {
+               serio->id.proto = SERIO_SUNKBD;
+               strlcpy(serio->name, "zskbd", sizeof(serio->name));
        } else {
-               printk(KERN_WARNING "zs%d: not enough memory for serio port\n",
-                       channel);
+               serio->id.proto = SERIO_SUN;
+               serio->id.extra = 1;
+               strlcpy(serio->name, "zsms", sizeof(serio->name));
        }
+       strlcpy(serio->phys,
+               (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+               sizeof(serio->phys));
+
+       serio->write = sunzilog_serio_write;
+       serio->open = sunzilog_serio_open;
+       serio->close = sunzilog_serio_close;
+       serio->dev.parent = up->port.dev;
+
+       serio_register_port(serio);
 }
 #endif
 
-static void __init sunzilog_init_hw(void)
+static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
 {
-       int i;
-
-       for (i = 0; i < NUM_CHANNELS; i++) {
-               struct uart_sunzilog_port *up = &sunzilog_port_table[i];
-               struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
-               unsigned long flags;
-               int baud, brg;
+       struct zilog_channel __iomem *channel;
+       unsigned long flags;
+       int baud, brg;
 
-               spin_lock_irqsave(&up->port.lock, flags);
+       channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 
-               if (ZS_IS_CHANNEL_A(up)) {
-                       write_zsreg(channel, R9, FHWRES);
-                       ZSDELAY_LONG();
-                       (void) read_zsreg(channel, R0);
-               }
+       spin_lock_irqsave(&up->port.lock, flags);
+       if (ZS_IS_CHANNEL_A(up)) {
+               write_zsreg(channel, R9, FHWRES);
+               ZSDELAY_LONG();
+               (void) read_zsreg(channel, R0);
+       }
 
-               if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
-                       sunzilog_init_kbdms(up, i);
-                       up->curregs[R9] |= (NV | MIE);
-                       write_zsreg(channel, R9, up->curregs[R9]);
-               } else {
-                       /* Normal serial TTY. */
-                       up->parity_mask = 0xff;
-                       up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
-                       up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
-                       up->curregs[R3] = RxENAB | Rx8;
-                       up->curregs[R5] = TxENAB | Tx8;
-                       up->curregs[R9] = NV | MIE;
-                       up->curregs[R10] = NRZ;
-                       up->curregs[R11] = TCBR | RCBR;
-                       baud = 9600;
-                       brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
-                       up->curregs[R12] = (brg & 0xff);
-                       up->curregs[R13] = (brg >> 8) & 0xff;
-                       up->curregs[R14] = BRSRC | BRENAB;
-                       __load_zsregs(channel, up->curregs);
-                       write_zsreg(channel, R9, up->curregs[R9]);
-               }
+       if (up->port.line == KEYBOARD_LINE ||
+           up->port.line == MOUSE_LINE) {
+               sunzilog_init_kbdms(up, up->port.line);
+               up->curregs[R9] |= (NV | MIE);
+               write_zsreg(channel, R9, up->curregs[R9]);
+       } else {
+               /* Normal serial TTY. */
+               up->parity_mask = 0xff;
+               up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+               up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+               up->curregs[R3] = RxENAB | Rx8;
+               up->curregs[R5] = TxENAB | Tx8;
+               up->curregs[R9] = NV | MIE;
+               up->curregs[R10] = NRZ;
+               up->curregs[R11] = TCBR | RCBR;
+               baud = 9600;
+               brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+               up->curregs[R12] = (brg & 0xff);
+               up->curregs[R13] = (brg >> 8) & 0xff;
+               up->curregs[R14] = BRSRC | BRENAB;
+               __load_zsregs(channel, up->curregs);
+               write_zsreg(channel, R9, up->curregs[R9]);
+       }
 
-               spin_unlock_irqrestore(&up->port.lock, flags);
+       spin_unlock_irqrestore(&up->port.lock, flags);
 
 #ifdef CONFIG_SERIO
-               if (i == KEYBOARD_LINE || i == MOUSE_LINE)
-                       sunzilog_register_serio(up, i);
+       if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
+               sunzilog_register_serio(up, up->port.line);
 #endif
-       }
-}
-
-static struct zilog_layout __iomem * __init get_zs(int chip, int node);
-
-static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node)
-{
-       sunzilog_chip_regs[t->devices] = get_zs(t->devices, node);
-       t->devices++;
 }
 
-static int __init sunzilog_ports_init(void)
+static int __devinit zs_get_instance(struct device_node *dp)
 {
-       struct zs_probe_scan scan;
        int ret;
-       int uart_count;
-       int i;
 
-       printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG);
+       ret = of_getintprop_default(dp, "slave", -1);
+       if (ret != -1)
+               return ret;
 
-       scan.scanner = sunzilog_scan_probe;
-       scan.depth = 0;
-       scan.devices = 0;
-       sunzilog_scan(&scan, prom_getchild(prom_root_node));
+       if (of_find_property(dp, "keyboard", NULL))
+               ret = 1;
+       else
+               ret = 0;
 
-       sunzilog_prepare();
+       return ret;
+}
 
-       if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
-                       "SunZilog", sunzilog_irq_chain)) {
-               prom_printf("SunZilog: Unable to register zs interrupt handler.\n");
-               prom_halt();
-       }
+static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *match)
+{
+       static int zilog_irq = -1;
+       struct of_device *op = to_of_device(&dev->dev);
+       struct uart_sunzilog_port *up;
+       struct zilog_layout __iomem *rp;
+       int inst = zs_get_instance(dev->node);
+       int err;
 
-       sunzilog_init_hw();
+       sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
+                                             sizeof(struct zilog_layout),
+                                             "zs");
+       if (!sunzilog_chip_regs[inst])
+               return -ENOMEM;
 
-       /* We can only init this once we have probed the Zilogs
-        * in the system. Do not count channels assigned to keyboards
-        * or mice when we are deciding how many ports to register.
-        */
-       uart_count = 0;
-       for (i = 0; i < NUM_CHANNELS; i++) {
-               struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+       rp = sunzilog_chip_regs[inst];
 
-               if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
-                       continue;
+       if (zilog_irq == -1) {
+               zilog_irq = op->irqs[0];
+               err = request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
+                                 "zs", sunzilog_irq_chain);
+               if (err) {
+                       of_iounmap(rp, sizeof(struct zilog_layout));
 
-               uart_count++;
+                       return err;
+               }
        }
-               
-       sunzilog_reg.nr = uart_count;
-       sunzilog_reg.minor = sunserial_current_minor;
-
-       ret = uart_register_driver(&sunzilog_reg);
-       if (ret == 0) {
-               sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
-               sunzilog_reg.cons = SUNZILOG_CONSOLE();
 
-               sunserial_current_minor += uart_count;
-
-               for (i = 0; i < NUM_CHANNELS; i++) {
-                       struct uart_sunzilog_port *up = &sunzilog_port_table[i];
-
-                       if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
-                               continue;
-
-                       if (uart_add_one_port(&sunzilog_reg, &up->port)) {
-                               printk(KERN_ERR
-                                   "SunZilog: failed to add port zs%d\n", i);
-                       }
+       up = &sunzilog_port_table[inst * 2];
+
+       /* Channel A */
+       up[0].port.mapbase = op->resource[0].start + 0x00;
+       up[0].port.membase = (void __iomem *) &rp->channelA;
+       up[0].port.iotype = UPIO_MEM;
+       up[0].port.irq = op->irqs[0];
+       up[0].port.uartclk = ZS_CLOCK;
+       up[0].port.fifosize = 1;
+       up[0].port.ops = &sunzilog_pops;
+       up[0].port.type = PORT_SUNZILOG;
+       up[0].port.flags = 0;
+       up[0].port.line = (inst * 2) + 0;
+       up[0].port.dev = &op->dev;
+       up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
+       if (inst == 1)
+               up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
+       sunzilog_init_hw(&up[0]);
+
+       /* Channel B */
+       up[1].port.mapbase = op->resource[0].start + 0x04;
+       up[1].port.membase = (void __iomem *) &rp->channelB;
+       up[1].port.iotype = UPIO_MEM;
+       up[1].port.irq = op->irqs[0];
+       up[1].port.uartclk = ZS_CLOCK;
+       up[1].port.fifosize = 1;
+       up[1].port.ops = &sunzilog_pops;
+       up[1].port.type = PORT_SUNZILOG;
+       up[1].port.flags = 0;
+       up[1].port.line = (inst * 2) + 1;
+       up[1].port.dev = &op->dev;
+       up[1].flags |= 0;
+       if (inst == 1)
+               up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
+       sunzilog_init_hw(&up[1]);
+
+       if (inst != 1) {
+               err = uart_add_one_port(&sunzilog_reg, &up[0].port);
+               if (err) {
+                       of_iounmap(rp, sizeof(struct zilog_layout));
+                       return err;
+               }
+               err = uart_add_one_port(&sunzilog_reg, &up[1].port);
+               if (err) {
+                       uart_remove_one_port(&sunzilog_reg, &up[0].port);
+                       of_iounmap(rp, sizeof(struct zilog_layout));
+                       return err;
                }
        }
 
-       return ret;
-}
-
-static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node)
-{
-       t->devices++;
+       return 0;
 }
 
-static int __init sunzilog_ports_count(void)
+static int __devexit zs_remove(struct of_device *dev)
 {
-       struct zs_probe_scan scan;
+       struct uart_sunzilog_port *up = dev_get_drvdata(&dev->dev);
+       struct zilog_channel __iomem *channel;
 
-       /* Sun4 Zilog setup is hard coded, no probing to do.  */
-       if (sparc_cpu_model == sun4)
-               return 2;
+       if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
+#ifdef CONFIG_SERIO
+               serio_unregister_port(&up->serio);
+#endif
+       } else
+               uart_remove_one_port(&sunzilog_reg, &up->port);
 
-       scan.scanner = sunzilog_scan_count;
-       scan.depth = 0;
-       scan.devices = 0;
+       channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 
-       sunzilog_scan(&scan, prom_getchild(prom_root_node));
+       of_iounmap(channel, sizeof(struct zilog_channel));
 
-       return scan.devices;
+       return 0;
 }
 
+static struct of_device_id zs_match[] = {
+       {
+               .name = "zs",
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, zs_match);
+
+static struct of_platform_driver zs_driver = {
+       .name           = "zs",
+       .match_table    = zs_match,
+       .probe          = zs_probe,
+       .remove         = __devexit_p(zs_remove),
+};
+
 static int __init sunzilog_init(void)
 {
+       struct device_node *dp;
+       int err;
 
-       NUM_SUNZILOG = sunzilog_ports_count();
-       if (NUM_SUNZILOG == 0)
-               return -ENODEV;
+       NUM_SUNZILOG = 0;
+       for_each_node_by_name(dp, "zs")
+               NUM_SUNZILOG++;
 
-       sunzilog_alloc_tables();
+       if (NUM_SUNZILOG) {
+               int uart_count;
 
-       sunzilog_ports_init();
+               err = sunzilog_alloc_tables();
+               if (err)
+                       return err;
 
-       return 0;
+               /* Subtract 1 for keyboard, 1 for mouse.  */
+               uart_count = (NUM_SUNZILOG * 2) - 2;
+
+               sunzilog_reg.nr = uart_count;
+               sunzilog_reg.minor = sunserial_current_minor;
+               err = uart_register_driver(&sunzilog_reg);
+               if (err) {
+                       sunzilog_free_tables();
+                       return err;
+               }
+               sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
+               sunzilog_reg.cons = SUNZILOG_CONSOLE();
+
+               sunserial_current_minor += uart_count;
+       }
+
+       return of_register_driver(&zs_driver, &of_bus_type);
 }
 
 static void __exit sunzilog_exit(void)
 {
-       int i;
+       of_unregister_driver(&zs_driver);
 
-       for (i = 0; i < NUM_CHANNELS; i++) {
-               struct uart_sunzilog_port *up = &sunzilog_port_table[i];
-
-               if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
-#ifdef CONFIG_SERIO
-                       if (up->serio) {
-                               serio_unregister_port(up->serio);
-                               up->serio = NULL;
-                       }
-#endif
-               } else
-                       uart_remove_one_port(&sunzilog_reg, &up->port);
+       if (NUM_SUNZILOG) {
+               uart_unregister_driver(&sunzilog_reg);
+               sunzilog_free_tables();
        }
-
-       uart_unregister_driver(&sunzilog_reg);
 }
 
 module_init(sunzilog_init);