#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
/* Oscillator frequencies. These are board-specific */
unsigned long at32_board_osc_rates[3] = {
#include <asm/setup.h>
#include <asm/atmel-mci.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
*/
#ifdef CONFIG_BOARD_ATSTK1006
#include <linux/mtd/partitions.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing nand_timing __initdata = {
.ncs_read_setup = 0,
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
#include "atstk1000.h"
#ifndef __ASM_AVR32_GPIO_H
#define __ASM_AVR32_GPIO_H
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
#endif /* __ASM_AVR32_GPIO_H */
#include <asm/addrspace.h>
#include <asm/byteorder.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
/* virt_to_phys will only work when address is in P1 or P2 */
static __inline__ unsigned long virt_to_phys(volatile void *address)
#define NR_INTERNAL_IRQS 64
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
#ifndef NR_IRQS
#define NR_IRQS (NR_INTERNAL_IRQS)
#include <asm/sysreg.h>
#include <asm/ocd.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
#include <asm/setup.h>
#include <asm/sysreg.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
+#include <mach/board.h>
+#include <mach/init.h>
extern int root_mountflags;
#include <asm/sysreg.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
static cycle_t read_cycle_count(void)
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-#include <asm/arch/sram.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
#include <video/atmel_lcdc.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
#include "hsmc.h"
#include <asm/gpio.h>
#include <asm/io.h>
-#include <asm/arch/portmux.h>
+#include <mach/portmux.h>
#include "pio.h"
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
#include "pm.h"
#include "sdramc.h"
#include <asm/cacheflush.h>
#include <asm/sysreg.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/sram.h>
+#include <mach/pm.h>
+#include <mach/sram.h>
/* FIXME: This is only valid for AP7000 */
#define SDRAMC_BASE 0xfff03800
#include <linux/err.h>
#include <linux/io.h>
-#include <asm/arch/board.h>
-#include <asm/arch/smc.h>
+#include <mach/board.h>
+#include <mach/smc.h>
#define DRV_NAME "pata_at32"
#define DRV_VERSION "0.0.3"
#include <asm/io.h>
#include <asm/unaligned.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#include "atmel-mci-regs.h"