myri10ge: use pci_map_page to prepare the dmatest buffer

Allocate a specific page and use pci_map_page for dma test instead
of relying on another existing buffer.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index db282ed9ab7db1aa3d37428ba61a6eff6d11c067..eab9b5acd0cf9790140898d3b1a70f9188a541c4 100644 (file)
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -717,6 +717,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
        int status;
        size_t bytes;
        u32 len;
+       struct page *dmatest_page;
+       dma_addr_t dmatest_bus;
 
        /* try to send a reset command to the card to see if it
         * is alive */
@@ -726,6 +728,11 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
                dev_err(&mgp->pdev->dev, "failed reset\n");
                return -ENXIO;
        }
+       dmatest_page = alloc_page(GFP_KERNEL);
+       if (!dmatest_page)
+               return -ENOMEM;
+       dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
+                                  DMA_BIDIRECTIONAL);
 
        /* Now exchange information about interrupts  */
 
@@ -764,8 +771,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
 
        len = mgp->tx.boundary;
 
-       cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
-       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+       cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
        cmd.data2 = len * 0x10000;
        status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
        if (status == 0)
@@ -774,8 +781,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
        else
                dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n",
                         status);
-       cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
-       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+       cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
        cmd.data2 = len * 0x1;
        status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
        if (status == 0)
@@ -785,8 +792,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
                dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n",
                         status);
 
-       cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
-       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+       cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+       cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
        cmd.data2 = len * 0x10001;
        status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
        if (status == 0)
@@ -796,6 +803,9 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
                dev_warn(&mgp->pdev->dev,
                         "DMA read/write benchmark failed: %d\n", status);
 
+       pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+       put_page(dmatest_page);
+
        memset(mgp->rx_done.entry, 0, bytes);
 
        /* reset mcp/driver shared state back to 0 */