/*
* MPC8540 ADS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8540ADS";
PowerPC,8540@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8540@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x100000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
device_type = "network";
model = "FEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2>;
+ interrupts = <41 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x02 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
+ 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x03 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
+ 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x04 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x05 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x0c */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x0d */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
+ 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x0e */
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x0f */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
+ 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x14 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x15 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
/*
* MPC8541 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8541CDS";
PowerPC,8541@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8541@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8541-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8541-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9000 1000>;
+ reg = <0x0 0x2000 0x9000 0x1000>;
};
};
compatible = "fsl,mpc8541-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
};
};
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
+ 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
+ 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
/*
* MPC8544 DS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
};
cpus {
- #cpus = <1>;
+ #cpus = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8544@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0x0 0x0>; // Filled by U-Boot
};
soc8544@e0000000 {
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
compatible = "fsl,8544-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8544-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <0>;
+ interrupts = <10 1>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <1>;
+ interrupts = <10 1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <21300 4>;
- ranges = <0 21100 200>;
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8544-dma-channel",
"fsl,eloplus-dma-channel";
- reg = <0 80>;
+ reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
- interrupts = <14 2>;
+ interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8544-dma-channel",
"fsl,eloplus-dma-channel";
- reg = <80 80>;
+ reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
- interrupts = <15 2>;
+ interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8544-dma-channel",
"fsl,eloplus-dma-channel";
- reg = <100 80>;
+ reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8544-dma-channel",
"fsl,eloplus-dma-channel";
- reg = <180 80>;
+ reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
+ interrupts = <23 2>;
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
cell-index = <0>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 J16 Slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 2 1
- 9000 0 0 4 &mpic 1 1>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 c0000000 c0000000 0 20000000
- 01000000 0 00000000 e1000000 0 00010000>;
- clock-frequency = <3f940aa>;
+ interrupts = <24 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
};
pci1: pcie@e0009000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e1010000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xe0009000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00010000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e1020000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xe000a000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00010000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000b000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 b0000000 b0000000 0 00100000
- 01000000 0 00000000 b0100000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xe000b000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1b 2>;
- interrupt-map-mask = <ff00 0 0 1>;
+ interrupts = <27 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
interrupt-map = <
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 b0000000
- 02000000 0 b0000000
- 0 00100000
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
uli1575@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 b0000000
- 02000000 0 b0000000
- 0 00100000
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0
- 01000000 0 0
- 00001000>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0
+ 0x1000000 0x0 0x0
+ 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
interrupt-parent = <&i8259>;
keyboard@0 {
- reg = <0>;
+ reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
- reg = <1>;
+ reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <0x1 0x400 0x80>;
};
};
};
/*
* MPC8548 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8548CDS";
PowerPC,8548@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities reg
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 02000 0 0 1 &mpic 0 1
- 02000 0 0 2 &mpic 1 1
- 02000 0 0 3 &mpic 2 1
- 02000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x5 (PCIX Slot 3) */
- 02800 0 0 1 &mpic 1 1
- 02800 0 0 2 &mpic 2 1
- 02800 0 0 3 &mpic 3 1
- 02800 0 0 4 &mpic 0 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x6 (PCIX Slot 4) */
- 03000 0 0 1 &mpic 2 1
- 03000 0 0 2 &mpic 3 1
- 03000 0 0 3 &mpic 0 1
- 03000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x8 (PCIX Slot 5) */
- 04000 0 0 1 &mpic 0 1
- 04000 0 0 2 &mpic 1 1
- 04000 0 0 3 &mpic 2 1
- 04000 0 0 4 &mpic 3 1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0xC (Tsi310 bridge) */
- 06000 0 0 1 &mpic 0 1
- 06000 0 0 2 &mpic 1 1
- 06000 0 0 3 &mpic 2 1
- 06000 0 0 4 &mpic 3 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x14 (Slot 2) */
- 0a000 0 0 1 &mpic 0 1
- 0a000 0 0 2 &mpic 1 1
- 0a000 0 0 3 &mpic 2 1
- 0a000 0 0 4 &mpic 3 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x15 (Slot 3) */
- 0a800 0 0 1 &mpic 1 1
- 0a800 0 0 2 &mpic 2 1
- 0a800 0 0 3 &mpic 3 1
- 0a800 0 0 4 &mpic 0 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x16 (Slot 4) */
- 0b000 0 0 1 &mpic 2 1
- 0b000 0 0 2 &mpic 3 1
- 0b000 0 0 3 &mpic 0 1
- 0b000 0 0 4 &mpic 1 1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x18 (Slot 5) */
- 0c000 0 0 1 &mpic 0 1
- 0c000 0 0 2 &mpic 1 1
- 0c000 0 0 3 &mpic 2 1
- 0c000 0 0 4 &mpic 3 1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0E000 0 0 1 &mpic 0 1
- 0E000 0 0 2 &mpic 1 1
- 0E000 0 0 3 &mpic 2 1
- 0E000 0 0 4 &mpic 3 1>;
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
pci_bridge@1c {
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x04 (VIA chip) */
- 2000 0 0 1 &mpic 0 1
- 2000 0 0 2 &mpic 1 1
- 2000 0 0 3 &mpic 2 1
- 2000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x05 (8139) */
- 2800 0 0 1 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
/* IDSEL 0x06 (Slot 6) */
- 3000 0 0 1 &mpic 2 1
- 3000 0 0 2 &mpic 3 1
- 3000 0 0 3 &mpic 0 1
- 3000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDESL 0x07 (Slot 7) */
- 3800 0 0 1 &mpic 3 1
- 3800 0 0 2 &mpic 0 1
- 3800 0 0 3 &mpic 1 1
- 3800 0 0 4 &mpic 2 1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
- reg = <e000 0 0 0 0>;
+ reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00080000>;
- clock-frequency = <1fca055>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x80000>;
+ clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <2000 0 0 0 0>;
- ranges = <1 0 01000000 0 0 00001000>;
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
};
};
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic 1 1
- a800 0 0 3 &mpic 2 1
- a800 0 0 4 &mpic 3 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
pci2: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 08000000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x8000000>;
};
};
};
/*
* MPC8555 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8555CDS";
PowerPC,8555@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8555@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR 1M
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8555-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8555-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 2000 9000 1000>;
+ reg = <0x0 0x2000 0x9000 0x1000>;
};
};
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
+ 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
+ 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
/*
* MPC8560 ADS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8560ADS";
PowerPC,8560@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <04ead9a0>;
- bus-frequency = <13ab6680>;
- clock-frequency = <312c8040>;
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <82500000>;
+ bus-frequency = <330000000>;
+ clock-frequency = <825000000>;
};
};
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
soc8560@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00000200>;
- bus-frequency = <13ab6680>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x200>;
+ bus-frequency = <330000000>;
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <40000>; // L2, 256K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
device_type = "open-pic";
};
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
- reg = <919c0 30>;
+ reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 80000 10000>;
+ ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 4000 9000 2000>;
+ reg = <0x0 0x4000 0x9000 0x2000>;
};
};
compatible = "fsl,mpc8560-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
- reg = <919f0 10 915f0 10>;
- clock-frequency = <d#165000000>;
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <2e 2>;
+ interrupts = <46 2>;
interrupt-parent = <&mpic>;
- reg = <90c00 80>;
+ reg = <0x90c00 0x80>;
compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
};
device_type = "serial";
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <91a00 20 88000 100>;
+ reg = <0x91a00 0x20 0x88000 0x100>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <00800000>;
- current-speed = <1c200>;
- interrupts = <28 8>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <115200>;
+ interrupts = <40 8>;
interrupt-parent = <&cpmpic>;
};
device_type = "serial";
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
- reg = <91a20 20 88100 100>;
+ reg = <0x91a20 0x20 0x88100 0x100>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <04a00000>;
- current-speed = <1c200>;
- interrupts = <29 8>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <115200>;
+ interrupts = <41 8>;
interrupt-parent = <&cpmpic>;
};
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <91320 20 88500 100 913b0 1>;
+ reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <16200300>;
- interrupts = <21 8>;
+ fsl,cpm-command = <0x16200300>;
+ interrupts = <33 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
- reg = <91340 20 88600 100 913d0 1>;
+ reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <1a400300>;
- interrupts = <22 8>;
+ fsl,cpm-command = <0x1a400300>;
+ interrupts = <34 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
- reg = <e0008000 1000>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x2 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
+ 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x3 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
+ 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x4 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x5 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 12 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 13 */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
+ 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 14*/
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
+ 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 15 */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
+ 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 18 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 19 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
+ 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 20 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 21 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 01000000>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
};
};
/*
* MPC8568E MDS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/*
/memreserve/ 00000000 1000000;
PowerPC,8568@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
bcsr@f8000000 {
device_type = "board-control";
- reg = <f8000000 8000>;
+ reg = <0xf8000000 0x8000>;
};
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
- reg = <68>;
+ reg = <0x68>;
};
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
- reg = <30000 f000>;
- interrupts = <2d 2>;
+ reg = <0x30000 0xf000>;
+ interrupts = <45 2>;
interrupt-parent = <&mpic>;
num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <000000fe>;
- descriptor-types-mask = <012b0ebf>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0xfe>;
+ descriptor-types-mask = <0x12b0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
par_io@e0100 {
- reg = <e0100 100>;
+ reg = <0xe0100 0x100>;
device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 4 0a 1 0 2 0 /* TxD0 */
- 4 09 1 0 2 0 /* TxD1 */
- 4 08 1 0 2 0 /* TxD2 */
- 4 07 1 0 2 0 /* TxD3 */
- 4 17 1 0 2 0 /* TxD4 */
- 4 16 1 0 2 0 /* TxD5 */
- 4 15 1 0 2 0 /* TxD6 */
- 4 14 1 0 2 0 /* TxD7 */
- 4 0f 2 0 2 0 /* RxD0 */
- 4 0e 2 0 2 0 /* RxD1 */
- 4 0d 2 0 2 0 /* RxD2 */
- 4 0c 2 0 2 0 /* RxD3 */
- 4 1d 2 0 2 0 /* RxD4 */
- 4 1c 2 0 2 0 /* RxD5 */
- 4 1b 2 0 2 0 /* RxD6 */
- 4 1a 2 0 2 0 /* RxD7 */
- 4 0b 1 0 2 0 /* TX_EN */
- 4 18 1 0 2 0 /* TX_ER */
- 4 10 2 0 2 0 /* RX_DV */
- 4 1e 2 0 2 0 /* RX_ER */
- 4 11 2 0 2 0 /* RX_CLK */
- 4 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0>; /* GTX125 */
+ 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 5 0a 1 0 2 0 /* TxD0 */
- 5 09 1 0 2 0 /* TxD1 */
- 5 08 1 0 2 0 /* TxD2 */
- 5 07 1 0 2 0 /* TxD3 */
- 5 17 1 0 2 0 /* TxD4 */
- 5 16 1 0 2 0 /* TxD5 */
- 5 15 1 0 2 0 /* TxD6 */
- 5 14 1 0 2 0 /* TxD7 */
- 5 0f 2 0 2 0 /* RxD0 */
- 5 0e 2 0 2 0 /* RxD1 */
- 5 0d 2 0 2 0 /* RxD2 */
- 5 0c 2 0 2 0 /* RxD3 */
- 5 1d 2 0 2 0 /* RxD4 */
- 5 1c 2 0 2 0 /* RxD5 */
- 5 1b 2 0 2 0 /* RxD6 */
- 5 1a 2 0 2 0 /* RxD7 */
- 5 0b 1 0 2 0 /* TX_EN */
- 5 18 1 0 2 0 /* TX_ER */
- 5 10 2 0 2 0 /* RX_DV */
- 5 1e 2 0 2 0 /* RX_ER */
- 5 11 2 0 2 0 /* RX_CLK */
- 5 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0 /* GTX125 */
- 4 06 3 0 2 0 /* MDIO */
- 4 05 1 0 2 0>; /* MDC */
+ 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
+ 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
+ 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
};
};
};
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
- ranges = <0 e0080000 00040000>;
- reg = <e0080000 480>;
+ ranges = <0x0 0xe0080000 0x40000>;
+ reg = <0xe0080000 0x480>;
brg-frequency = <0>;
- bus-frequency = <179A7B00>;
+ bus-frequency = <396000000>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0 00010000 0000c000>;
+ ranges = <0x0 0x10000 0xc000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
- reg = <0 c000>;
+ reg = <0x0 0xc000>;
};
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
- reg = <4c0 40>;
+ reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
- reg = <500 40>;
+ reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
- reg = <2000 200>;
- interrupts = <20>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
- reg = <3000 200>;
- interrupts = <21>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <2120 18>;
+ reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
/* These are the same PHYs as on
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
big-endian;
- interrupts = <2e 2 2e 2>; //high:30 low:30
+ interrupts = <46 2 46 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 &mpic 6 1
- 9800 0 0 2 &mpic 7 1
- 9800 0 0 3 &mpic 4 1
- 9800 0 0 4 &mpic 5 1>;
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ interrupts = <24 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
/* PCI Express */
pci1: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00800000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x800000>;
};
};
};
/*
* MPC8572 DS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* option) any later version.
*/
+/dts-v1/;
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
PowerPC,8572@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
PowerPC,8572@1 {
device_type = "cpu";
- reg = <1>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0x0 0x0>; // Filled by U-Boot
};
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 ffe00000 00100000>;
- reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ ranges = <0x0 0xffe00000 0x100000>;
+ reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
- reg = <6000 1000>;
+ reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <0>;
+ interrupts = <10 1>;
+ reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <1>;
+ interrupts = <10 1>;
+ reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <2>;
+ interrupts = <10 1>;
+ reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
- reg = <3>;
+ interrupts = <10 1>;
+ reg = <0x3>;
};
};
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe08000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 ffc00000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe08000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <ff00 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 1 - PCI slot 1 */
- 8900 0 0 1 &mpic 2 1
- 8900 0 0 2 &mpic 3 1
- 8900 0 0 3 &mpic 4 1
- 8900 0 0 4 &mpic 1 1
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 2 - PCI slot 1 */
- 8a00 0 0 1 &mpic 2 1
- 8a00 0 0 2 &mpic 3 1
- 8a00 0 0 3 &mpic 4 1
- 8a00 0 0 4 &mpic 1 1
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 3 - PCI slot 1 */
- 8b00 0 0 1 &mpic 2 1
- 8b00 0 0 2 &mpic 3 1
- 8b00 0 0 3 &mpic 4 1
- 8b00 0 0 4 &mpic 1 1
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 4 - PCI slot 1 */
- 8c00 0 0 1 &mpic 2 1
- 8c00 0 0 2 &mpic 3 1
- 8c00 0 0 3 &mpic 4 1
- 8c00 0 0 4 &mpic 1 1
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 5 - PCI slot 1 */
- 8d00 0 0 1 &mpic 2 1
- 8d00 0 0 2 &mpic 3 1
- 8d00 0 0 3 &mpic 4 1
- 8d00 0 0 4 &mpic 1 1
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 6 - PCI slot 1 */
- 8e00 0 0 1 &mpic 2 1
- 8e00 0 0 2 &mpic 3 1
- 8e00 0 0 3 &mpic 4 1
- 8e00 0 0 4 &mpic 1 1
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 7 - PCI slot 1 */
- 8f00 0 0 1 &mpic 2 1
- 8f00 0 0 2 &mpic 3 1
- 8f00 0 0 3 &mpic 4 1
- 8f00 0 0 4 &mpic 1 1
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 func 0 - PCI slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 1 1
- 9000 0 0 4 &mpic 2 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 1 - PCI slot 2 */
- 9100 0 0 1 &mpic 3 1
- 9100 0 0 2 &mpic 4 1
- 9100 0 0 3 &mpic 1 1
- 9100 0 0 4 &mpic 2 1
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 2 - PCI slot 2 */
- 9200 0 0 1 &mpic 3 1
- 9200 0 0 2 &mpic 4 1
- 9200 0 0 3 &mpic 1 1
- 9200 0 0 4 &mpic 2 1
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 3 - PCI slot 2 */
- 9300 0 0 1 &mpic 3 1
- 9300 0 0 2 &mpic 4 1
- 9300 0 0 3 &mpic 1 1
- 9300 0 0 4 &mpic 2 1
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 4 - PCI slot 2 */
- 9400 0 0 1 &mpic 3 1
- 9400 0 0 2 &mpic 4 1
- 9400 0 0 3 &mpic 1 1
- 9400 0 0 4 &mpic 2 1
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 5 - PCI slot 2 */
- 9500 0 0 1 &mpic 3 1
- 9500 0 0 2 &mpic 4 1
- 9500 0 0 3 &mpic 1 1
- 9500 0 0 4 &mpic 2 1
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 6 - PCI slot 2 */
- 9600 0 0 1 &mpic 3 1
- 9600 0 0 2 &mpic 4 1
- 9600 0 0 3 &mpic 1 1
- 9600 0 0 4 &mpic 2 1
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 7 - PCI slot 2 */
- 9700 0 0 1 &mpic 3 1
- 9700 0 0 2 &mpic 4 1
- 9700 0 0 3 &mpic 1 1
- 9700 0 0 4 &mpic 2 1
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
uli1575@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
- 00001000>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
- reg = <0>;
+ reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
- reg = <1>;
+ reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <0x1 0x400 0x80>;
};
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe09000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 ffc10000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe09000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <ffe0a000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 c0000000 c0000000 0 20000000
- 01000000 0 00000000 ffc20000 0 00010000>;
- clock-frequency = <1fca055>;
+ reg = <0xffe0a000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1b 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <27 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 c0000000
- 02000000 0 c0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
};
};
};
projects / linux-2.6 / commitdiff