spi_mpc83xx handles other processors with QUICC engine

Currently, all QE SPI controllers are almost the same comparing to
MPC83xx's, thus let's use that driver for them.

Tested to work on MPC85xx in loopback mode.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b91571122daadfd3c0f7ae6115f5c7bfe62784e2..a77ede598d341bcc49581e124868eef1aef4810e 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -124,16 +124,17 @@ config SPI_MPC52xx_PSC
          Controller in master SPI mode.
 
 config SPI_MPC83xx
-       tristate "Freescale MPC83xx SPI controller"
-       depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+       tristate "Freescale MPC83xx/QUICC Engine SPI controller"
+       depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
        select SPI_BITBANG
        help
-         This enables using the Freescale MPC83xx SPI controller in master
-         mode.
+         This enables using the Freescale MPC83xx and QUICC Engine SPI
+         controllers in master mode.
 
          Note, this driver uniquely supports the SPI controller on the MPC83xx
-         family of PowerPC processors.  The MPC83xx uses a simple set of shift
-         registers for data (opposed to the CPM based descriptor model).
+         family of PowerPC processors, plus processors with QUICC Engine
+         technology. This driver uses a simple set of shift registers for data
+         (opposed to the CPM based descriptor model).
 
 config SPI_OMAP_UWIRE
        tristate "OMAP1 MicroWire"