[ARM] 3541/2: workaround for PXA27x erratum E7

Patch from Nicolas Pitre

According to the Intel PXA27x Processor Family Specification
Update document (doc.nr. 280071-009) erratum E7, some care must be taken
to locate the disabling and re-enabling of the MMU to the beginning of a
cache line to avoid problems in some circumstances.

Credits to Simon Vogl <simon.vogl@researchstudios.at> for bringing this
up.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 23016f6aa645f405dcb9108240f1fad80f4ac4b9..9b42b88bfba0d3ad5a71aa38bcd668e59d4620f0 100644 (file)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -448,8 +448,11 @@ __common_mmu_cache_on:
                mov     r1, #-1
                mcr     p15, 0, r3, c2, c0, 0   @ load page table pointer
                mcr     p15, 0, r1, c3, c0, 0   @ load domain access control
-               mcr     p15, 0, r0, c1, c0, 0   @ load control register
-               mov     pc, lr
+               b       1f
+               .align  5                       @ cache line aligned
+1:             mcr     p15, 0, r0, c1, c0, 0   @ load control register
+               mrc     p15, 0, r0, c1, c0, 0   @ and read it back to
+               sub     pc, lr, r0, lsr #32     @ properly flush pipeline
 
 /*
  * All code following this line is relocatable.  It is relocated by

diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 535395e25a8a5b90de9f2e61277ef8ade7632446..521538671f4ce6efcaac8b645d9431c21f127467 100644 (file)
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -138,17 +138,23 @@ ENTRY(cpu_xscale_proc_fin)
  * to what would be the reset vector.
  *
  * loc: location to jump to for soft reset
+ *
+ * Beware PXA270 erratum E7.
  */
        .align  5
 ENTRY(cpu_xscale_reset)
        mov     r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
        msr     cpsr_c, r1                      @ reset CPSR
+       mcr     p15, 0, r1, c10, c4, 1          @ unlock I-TLB
+       mcr     p15, 0, r1, c8, c5, 0           @ invalidate I-TLB
        mrc     p15, 0, r1, c1, c0, 0           @ ctrl register
        bic     r1, r1, #0x0086                 @ ........B....CA.
        bic     r1, r1, #0x3900                 @ ..VIZ..S........
+       sub     pc, pc, #4                      @ flush pipeline
+       @ *** cache line aligned ***
        mcr     p15, 0, r1, c1, c0, 0           @ ctrl register
-       mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches & BTB
        bic     r1, r1, #0x0001                 @ ...............M
+       mcr     p15, 0, ip, c7, c7, 0           @ invalidate I,D caches & BTB
        mcr     p15, 0, r1, c1, c0, 0           @ ctrl register
        @ CAUTION: MMU turned off from this point. We count on the pipeline
        @ already containing those two last instructions to survive.