return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
}
-/* This is a convenient routine to get a 32-bit value from the Guest (a very
- * common operation). Here we can see how useful the kill_lguest() routine we
- * met in the Launcher can be: we return a random value (0) instead of needing
- * to return an error. */
-u32 lgread_u32(struct lguest *lg, unsigned long addr)
-{
- u32 val = 0;
-
- /* Don't let them access lguest binary. */
- if (!lguest_address_ok(lg, addr, sizeof(val))
- || get_user(val, (u32 *)(lg->mem_base + addr)) != 0)
- kill_guest(lg, "bad read address %#lx: pfn_limit=%u membase=%p", addr, lg->pfn_limit, lg->mem_base);
- return val;
-}
-
-/* Same thing for writing a value. */
-void lgwrite_u32(struct lguest *lg, unsigned long addr, u32 val)
-{
- if (!lguest_address_ok(lg, addr, sizeof(val))
- || put_user(val, (u32 *)(lg->mem_base + addr)) != 0)
- kill_guest(lg, "bad write address %#lx", addr);
-}
-
-/* This routine is more generic, and copies a range of Guest bytes into a
- * buffer. If the copy_from_user() fails, we fill the buffer with zeroes, so
- * the caller doesn't end up using uninitialized kernel memory. */
-void lgread(struct lguest *lg, void *b, unsigned long addr, unsigned bytes)
+/* This routine copies memory from the Guest. Here we can see how useful the
+ * kill_lguest() routine we met in the Launcher can be: we return a random
+ * value (all zeroes) instead of needing to return an error. */
+void __lgread(struct lguest *lg, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
|| copy_from_user(b, lg->mem_base + addr, bytes) != 0) {
}
}
-/* Similarly, our generic routine to copy into a range of Guest bytes. */
-void lgwrite(struct lguest *lg, unsigned long addr, const void *b,
- unsigned bytes)
+/* This is the write (copy into guest) version. */
+void __lgwrite(struct lguest *lg, unsigned long addr, const void *b,
+ unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
|| copy_to_user(lg->mem_base + addr, b, bytes) != 0)
kill_guest(lg, "bad write address %#lx len %u", addr, bytes);
}
-/* (end of memory access helper routines) :*/
+/*:*/
/*H:030 Let's jump straight to the the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
char msg[128];
/* If the lgread fails, it will call kill_guest() itself; the
* kill_guest() with the message will be ignored. */
- lgread(lg, msg, args->arg1, sizeof(msg));
+ __lgread(lg, msg, args->arg1, sizeof(msg));
msg[sizeof(msg)-1] = '\0';
kill_guest(lg, "CRASH: %s", msg);
break;
{
/* Stack grows upwards: move stack then write value. */
*gstack -= 4;
- lgwrite_u32(lg, *gstack, val);
+ lgwrite(lg, *gstack, u32, val);
}
/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
extern struct mutex lguest_lock;
/* core.c: */
-u32 lgread_u32(struct lguest *lg, unsigned long addr);
-void lgwrite_u32(struct lguest *lg, unsigned long addr, u32 val);
-void lgread(struct lguest *lg, void *buf, unsigned long addr, unsigned len);
-void lgwrite(struct lguest *lg, unsigned long, const void *buf, unsigned len);
int lguest_address_ok(const struct lguest *lg,
unsigned long addr, unsigned long len);
+void __lgread(struct lguest *, void *, unsigned long, unsigned);
+void __lgwrite(struct lguest *, unsigned long, const void *, unsigned);
+
+/*L:306 Using memory-copy operations like that is usually inconvient, so we
+ * have the following helper macros which read and write a specific type (often
+ * an unsigned long).
+ *
+ * This reads into a variable of the given type then returns that. */
+#define lgread(lg, addr, type) \
+ ({ type _v; __lgread((lg), &_v, (addr), sizeof(_v)); _v; })
+
+/* This checks that the variable is of the given type, then writes it out. */
+#define lgwrite(lg, addr, type, val) \
+ do { \
+ typecheck(type, val); \
+ __lgwrite((lg), (addr), &(val), sizeof(val)); \
+ } while(0)
+/* (end of memory access helper routines) :*/
+
int run_guest(struct lguest *lg, unsigned long __user *user);
/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
pte_t *spte;
/* First step: get the top-level Guest page table entry. */
- gpgd = __pgd(lgread_u32(lg, gpgd_addr(lg, vaddr)));
+ gpgd = lgread(lg, gpgd_addr(lg, vaddr), pgd_t);
/* Toplevel not present? We can't map it in. */
if (!(pgd_flags(gpgd) & _PAGE_PRESENT))
return 0;
/* OK, now we look at the lower level in the Guest page table: keep its
* address, because we might update it later. */
gpte_ptr = gpte_addr(lg, gpgd, vaddr);
- gpte = __pte(lgread_u32(lg, gpte_ptr));
+ gpte = lgread(lg, gpte_ptr, pte_t);
/* If this page isn't in the Guest page tables, we can't page it in. */
if (!(pte_flags(gpte) & _PAGE_PRESENT))
/* Finally, we write the Guest PTE entry back: we've set the
* _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
- lgwrite_u32(lg, gpte_ptr, pte_val(gpte));
+ lgwrite(lg, gpte_ptr, pte_t, gpte);
/* We succeeded in mapping the page! */
return 1;
pte_t gpte;
/* First step: get the top-level Guest page table entry. */
- gpgd = __pgd(lgread_u32(lg, gpgd_addr(lg, vaddr)));
+ gpgd = lgread(lg, gpgd_addr(lg, vaddr), pgd_t);
/* Toplevel not present? We can't map it in. */
if (!(pgd_flags(gpgd) & _PAGE_PRESENT))
kill_guest(lg, "Bad address %#lx", vaddr);
- gpte = __pte(lgread_u32(lg, gpte_addr(lg, gpgd, vaddr)));
+ gpte = lgread(lg, gpte_addr(lg, gpgd, vaddr), pte_t);
if (!(pte_flags(gpte) & _PAGE_PRESENT))
kill_guest(lg, "Bad address %#lx", vaddr);
kill_guest(lg, "too many gdt entries %i", num);
/* We read the whole thing in, then fix it up. */
- lgread(lg, lg->arch.gdt, table, num * sizeof(lg->arch.gdt[0]));
+ __lgread(lg, lg->arch.gdt, table, num * sizeof(lg->arch.gdt[0]));
fixup_gdt_table(lg, 0, ARRAY_SIZE(lg->arch.gdt));
/* Mark that the GDT changed so the core knows it has to copy it again,
* even if the Guest is run on the same CPU. */
{
struct desc_struct *tls = &lg->arch.gdt[GDT_ENTRY_TLS_MIN];
- lgread(lg, tls, gtls, sizeof(*tls)*GDT_ENTRY_TLS_ENTRIES);
+ __lgread(lg, tls, gtls, sizeof(*tls)*GDT_ENTRY_TLS_ENTRIES);
fixup_gdt_table(lg, GDT_ENTRY_TLS_MIN, GDT_ENTRY_TLS_MAX+1);
lg->changed |= CHANGED_GDT_TLS;
}
return 0;
/* Decoding x86 instructions is icky. */
- lgread(lg, &insn, physaddr, 1);
+ insn = lgread(lg, physaddr, u8);
/* 0x66 is an "operand prefix". It means it's using the upper 16 bits
of the eax register. */
shift = 16;
/* The instruction is 1 byte so far, read the next byte. */
insnlen = 1;
- lgread(lg, &insn, physaddr + insnlen, 1);
+ insn = lgread(lg, physaddr + insnlen, u8);
}
/* We can ignore the lower bit for the moment and decode the 4 opcodes
projects / linux-2.6 / commitdiff