return err;
}
+/* Write a block of data to the chip's buffer with padding if
+ * neccessary, via the BAP. Synchronization/serialization is the
+ * caller's problem. len must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if (len < 0 || len % 2 || data_len > len)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Transfer all the complete words of data */
+ hermes_write_words(hw, dreg, buf, data_len/2);
+ /* If there is an odd byte left over pad and transfer it */
+ if (data_len & 1) {
+ u8 end[2];
+ end[1] = 0;
+ end[0] = ((unsigned char *)buf)[data_len - 1];
+ hermes_write_words(hw, dreg, end, 1);
+ data_len ++;
+ }
+ /* Now send zeros for the padding */
+ if (data_len < len)
+ hermes_clear_words(hw, dreg, (len - data_len) / 2);
+ /* Complete */
+ out:
+ return err;
+}
+
/* Read a Length-Type-Value record from the card.
*
* If length is NULL, we ignore the length read from the card, and
EXPORT_SYMBOL(hermes_bap_pread);
EXPORT_SYMBOL(hermes_bap_pwrite);
+EXPORT_SYMBOL(hermes_bap_pwrite_pad);
EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
u16 id, u16 offset);
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
+ unsigned data_len, unsigned len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
stats->tx_errors++;
goto fail;
}
+ /* Actual xfer length - allow for padding */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN - ETH_HLEN)
+ len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
data_len = len + ETH_HLEN;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
+ /* Actual xfer length - round up for odd length packets */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN)
+ len = ETH_ZLEN;
}
- /* Round up for odd length packets */
- err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
+ err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",