{
export_htab_values();
}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+ return (start + size) > crashk_res.start && start <= crashk_res.end;
+}
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
+#include <asm/kexec.h>
#ifdef DEBUG
#define DBG(fmt...) printk(KERN_ERR fmt)
return mem;
}
+static int __init early_parse_mem(char *p)
+{
+ if (!p)
+ return 1;
+
+ memory_limit = PAGE_ALIGN(memparse(p, &p));
+ DBG("memory limit = 0x%lx\n", memory_limit);
+
+ return 0;
+}
+early_param("mem", early_parse_mem);
+
+/*
+ * The device tree may be allocated below our memory limit, or inside the
+ * crash kernel region for kdump. If so, move it out now.
+ */
+static void move_device_tree(void)
+{
+ unsigned long start, size;
+ void *p;
+
+ DBG("-> move_device_tree\n");
+
+ start = __pa(initial_boot_params);
+ size = initial_boot_params->totalsize;
+
+ if ((memory_limit && (start + size) > memory_limit) ||
+ overlaps_crashkernel(start, size)) {
+ p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+ memcpy(p, initial_boot_params, size);
+ initial_boot_params = (struct boot_param_header *)p;
+ DBG("Moved device tree to 0x%p\n", p);
+ }
+
+ DBG("<- move_device_tree\n");
+}
/**
* unflattens the device-tree passed by the firmware, creating the
iommu_force_on = 1;
#endif
+ /* mem=x on the command line is the preferred mechanism */
lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
if (lprop)
memory_limit = *lprop;
DBG("Command line is: %s\n", cmd_line);
- if (strstr(cmd_line, "mem=")) {
- char *p, *q;
-
- for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
- q = p + 4;
- if (p > cmd_line && p[-1] != ' ')
- continue;
- memory_limit = memparse(q, &q);
- }
- }
-
/* break now */
return 1;
}
strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
- lmb_enforce_memory_limit(memory_limit);
- lmb_analyze();
-
- DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
-
/* Reserve LMB regions used by kernel, initrd, dt, etc... */
lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
#ifdef CONFIG_CRASH_DUMP
#endif
early_reserve_mem();
+ lmb_enforce_memory_limit(memory_limit);
+ lmb_analyze();
+
+ DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+
+ /* We may need to relocate the flat tree, do it now.
+ * FIXME .. and the initrd too? */
+ move_device_tree();
+
DBG("Scanning CPUs ...\n");
/* Retreive CPU related informations from the flat tree
return 0;
}
-#ifdef CONFIG_KEXEC
-/* We may have allocated the flat device tree inside the crash kernel region
- * in prom_init. If so we need to move it out into regular memory. */
-void kdump_move_device_tree(void)
-{
- unsigned long start, end;
- struct boot_param_header *new;
-
- start = __pa((unsigned long)initial_boot_params);
- end = start + initial_boot_params->totalsize;
-
- if (end < crashk_res.start || start > crashk_res.end)
- return;
-
- new = (struct boot_param_header*)
- __va(lmb_alloc(initial_boot_params->totalsize, PAGE_SIZE));
-
- memcpy(new, initial_boot_params, initial_boot_params->totalsize);
-
- initial_boot_params = new;
-
- DBG("Flat device tree blob moved to %p\n", initial_boot_params);
-
- /* XXX should we unreserve the old DT? */
-}
-#endif /* CONFIG_KEXEC */
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
-static unsigned long __initdata prom_memory_limit;
-
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
}
#endif
- opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
- if (opt) {
- opt += 4;
- RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
-#ifdef CONFIG_PPC64
- /* Align to 16 MB == size of ppc64 large page */
- RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
-#endif
- }
-
#ifdef CONFIG_KEXEC
/*
* crashkernel=size@addr specifies the location to reserve for
RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
}
- /*
- * If prom_memory_limit is set we reduce the upper limits *except* for
- * alloc_top_high. This must be the real top of RAM so we can put
- * TCE's up there.
- */
-
- RELOC(alloc_top_high) = RELOC(ram_top);
-
- if (RELOC(prom_memory_limit)) {
- if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
- prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
- RELOC(prom_memory_limit));
- RELOC(prom_memory_limit) = 0;
- } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
- prom_printf("Ignoring mem=%x >= ram_top.\n",
- RELOC(prom_memory_limit));
- RELOC(prom_memory_limit) = 0;
- } else {
- RELOC(ram_top) = RELOC(prom_memory_limit);
- RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
- }
- }
-
/*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
RELOC(rmo_top) = RELOC(ram_top);
RELOC(rmo_top) = min(0x30000000ul, RELOC(rmo_top));
RELOC(alloc_top) = RELOC(rmo_top);
+ RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
- prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
- if (RELOC(prom_memory_limit)) {
- /*
- * We align the start to a 16MB boundary so we can map
- * the TCE area using large pages if possible.
- * The end should be the top of RAM so no need to align it.
- */
- RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom,
- 0x1000000);
- RELOC(prom_tce_alloc_end) = local_alloc_top;
- }
+ /* These are only really needed if there is a memory limit in
+ * effect, but we don't know so export them always. */
+ RELOC(prom_tce_alloc_start) = local_alloc_bottom;
+ RELOC(prom_tce_alloc_end) = local_alloc_top;
/* Flag the first invalid entry */
prom_debug("ending prom_initialize_tce_table\n");
/*
* Fill in some infos for use by the kernel later on
*/
- if (RELOC(prom_memory_limit))
- prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
- &RELOC(prom_memory_limit),
- sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(ppc64_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
{
DBG(" -> setup_system()\n");
-#ifdef CONFIG_KEXEC
- kdump_move_device_tree();
-#endif
/*
* Unflatten the device-tree passed by prom_init or kexec
*/
return lmb_addrs_adjacent(base1, size1, base2, size2);
}
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
+static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
{
unsigned long i;
- rgn->region[r1].size += rgn->region[r2].size;
- for (i=r2; i < rgn->cnt-1; i++) {
- rgn->region[i].base = rgn->region[i+1].base;
- rgn->region[i].size = rgn->region[i+1].size;
+ for (i = r; i < rgn->cnt - 1; i++) {
+ rgn->region[i].base = rgn->region[i + 1].base;
+ rgn->region[i].size = rgn->region[i + 1].size;
}
rgn->cnt--;
}
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ rgn->region[r1].size += rgn->region[r2].size;
+ lmb_remove_region(rgn, r2);
+}
+
/* This routine called with relocation disabled. */
void __init lmb_init(void)
{
return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
}
-/*
- * Truncate the lmb list to memory_limit if it's set
- * You must call lmb_analyze() after this.
- */
+/* You must call lmb_analyze() after this. */
void __init lmb_enforce_memory_limit(unsigned long memory_limit)
{
unsigned long i, limit;
+ struct lmb_property *p;
if (! memory_limit)
return;
+ /* Truncate the lmb regions to satisfy the memory limit. */
limit = memory_limit;
for (i = 0; i < lmb.memory.cnt; i++) {
if (limit > lmb.memory.region[i].size) {
lmb.memory.cnt = i + 1;
break;
}
+
+ lmb.rmo_size = lmb.memory.region[0].size;
+
+ /* And truncate any reserves above the limit also. */
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ p = &lmb.reserved.region[i];
+
+ if (p->base > memory_limit)
+ p->size = 0;
+ else if ((p->base + p->size) > memory_limit)
+ p->size = memory_limit - p->base;
+
+ if (p->size == 0) {
+ lmb_remove_region(&lmb.reserved, i);
+ i--;
+ }
+ }
}
extern unsigned long iSeries_recal_tb;
extern unsigned long iSeries_recal_titan;
-static unsigned long cmd_mem_limit;
-
struct MemoryBlock {
unsigned long absStart;
unsigned long absEnd;
/* /chosen */
dt_start_node(dt, "chosen");
dt_prop_str(dt, "bootargs", cmd_line);
- if (cmd_mem_limit)
- dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit);
dt_end_node(dt);
dt_cpus(dt);
iSeries_get_cmdline();
- /* Save unparsed command line copy for /proc/cmdline */
- strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-
- /* Parse early parameters, in particular mem=x */
- parse_early_param();
-
build_flat_dt(&iseries_dt, phys_mem_size);
return (void *) __pa(&iseries_dt);
}
-/*
- * On iSeries we just parse the mem=X option from the command line.
- * On pSeries it's a bit more complicated, see prom_init_mem()
- */
-static int __init early_parsemem(char *p)
-{
- if (p)
- cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
- return 0;
-}
-early_param("mem", early_parsemem);
-
static void hvputc(char c)
{
if (c == '\n')
#define KEXEC_ARCH KEXEC_ARCH_PPC
#endif
+#ifndef __ASSEMBLY__
+
#ifdef CONFIG_KEXEC
-#ifndef __ASSEMBLY__
#ifdef __powerpc64__
/*
* This function is responsible for capturing register states if coming
extern void default_machine_crash_shutdown(struct pt_regs *regs);
extern void machine_kexec_simple(struct kimage *image);
+extern int overlaps_crashkernel(unsigned long start, unsigned long size);
+
+#else /* !CONFIG_KEXEC */
+
+static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+ return 0;
+}
-#endif /* ! __ASSEMBLY__ */
#endif /* CONFIG_KEXEC */
+#endif /* ! __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KEXEC_H */
projects / linux-2.6 / commitdiff