--- /dev/null
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Shashi Rao, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/oprofile/op_model_power4.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/oprofile_impl.h>
+#include <asm/reg.h>
+
+static unsigned char oprofile_running;
+
+/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
+static u64 mmcr0_val;
+static u64 mmcr1_val;
+
+/* inited in pa6t_reg_setup */
+static u64 reset_value[OP_MAX_COUNTER];
+
+static inline u64 ctr_read(unsigned int i)
+{
+ switch (i) {
+ case 0:
+ return mfspr(SPRN_PA6T_PMC0);
+ case 1:
+ return mfspr(SPRN_PA6T_PMC1);
+ case 2:
+ return mfspr(SPRN_PA6T_PMC2);
+ case 3:
+ return mfspr(SPRN_PA6T_PMC3);
+ case 4:
+ return mfspr(SPRN_PA6T_PMC4);
+ case 5:
+ return mfspr(SPRN_PA6T_PMC5);
+ default:
+ printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
+ return 0;
+ }
+}
+
+static inline void ctr_write(unsigned int i, u64 val)
+{
+ switch (i) {
+ case 0:
+ mtspr(SPRN_PA6T_PMC0, val);
+ break;
+ case 1:
+ mtspr(SPRN_PA6T_PMC1, val);
+ break;
+ case 2:
+ mtspr(SPRN_PA6T_PMC2, val);
+ break;
+ case 3:
+ mtspr(SPRN_PA6T_PMC3, val);
+ break;
+ case 4:
+ mtspr(SPRN_PA6T_PMC4, val);
+ break;
+ case 5:
+ mtspr(SPRN_PA6T_PMC5, val);
+ break;
+ default:
+ printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
+ break;
+ }
+}
+
+
+/* precompute the values to stuff in the hardware registers */
+static void pa6t_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int pmc;
+
+ /*
+ * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
+ * event_mappings file by turning off the counters that the user doesn't
+ * care about
+ *
+ * setup user and kernel profiling
+ */
+ for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
+ if (!ctr[pmc].enabled) {
+ sys->mmcr0 &= ~(0x1UL << pmc);
+ sys->mmcr0 &= ~(0x1UL << (pmc+12));
+ pr_debug("turned off counter %u\n", pmc);
+ }
+
+ if (sys->enable_kernel)
+ sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
+ else
+ sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
+
+ if (sys->enable_user)
+ sys->mmcr0 |= PA6T_MMCR0_PREN;
+ else
+ sys->mmcr0 &= ~PA6T_MMCR0_PREN;
+
+ /*
+ * The performance counter event settings are given in the mmcr0 and
+ * mmcr1 values passed from the user in the op_system_config
+ * structure (sys variable).
+ */
+ mmcr0_val = sys->mmcr0;
+ mmcr1_val = sys->mmcr1;
+ pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
+ pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
+
+ for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
+ /* counters are 40 bit. Move to cputable at some point? */
+ reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
+ pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+ pmc, reset_value[pmc]);
+ }
+}
+
+/* configure registers on this cpu */
+static void pa6t_cpu_setup(struct op_counter_config *ctr)
+{
+ u64 mmcr0 = mmcr0_val;
+ u64 mmcr1 = mmcr1_val;
+
+ /* Default is all PMCs off */
+ mmcr0 &= ~(0x3FUL);
+ mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+ /* program selected programmable events in */
+ mtspr(SPRN_PA6T_MMCR1, mmcr1);
+
+ pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
+ mfspr(SPRN_PA6T_MMCR0));
+ pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
+ mfspr(SPRN_PA6T_MMCR1));
+}
+
+static void pa6t_start(struct op_counter_config *ctr)
+{
+ int i;
+
+ /* Hold off event counting until rfid */
+ u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
+
+ for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
+ if (ctr[i].enabled)
+ ctr_write(i, reset_value[i]);
+ else
+ ctr_write(i, 0UL);
+
+ mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+ oprofile_running = 1;
+
+ pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+}
+
+static void pa6t_stop(void)
+{
+ u64 mmcr0;
+
+ /* freeze counters */
+ mmcr0 = mfspr(SPRN_PA6T_MMCR0);
+ mmcr0 |= PA6T_MMCR0_FCM0;
+ mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+ oprofile_running = 0;
+
+ pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+}
+
+/* handle the perfmon overflow vector */
+static void pa6t_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc = mfspr(SPRN_PA6T_SIAR);
+ int is_kernel = is_kernel_addr(pc);
+ u64 val;
+ int i;
+ u64 mmcr0;
+
+ /* disable perfmon counting until rfid */
+ mmcr0 = mfspr(SPRN_PA6T_MMCR0);
+ mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
+
+ /* Record samples. We've got one global bit for whether a sample
+ * was taken, so add it for any counter that triggered overflow.
+ */
+ for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
+ val = ctr_read(i);
+ if (val & (0x1UL << 39)) { /* Overflow bit set */
+ if (oprofile_running && ctr[i].enabled) {
+ if (mmcr0 & PA6T_MMCR0_SIARLOG)
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0UL);
+ }
+ }
+ }
+
+ /* Restore mmcr0 to a good known value since the PMI changes it */
+ mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
+ mtspr(SPRN_PA6T_MMCR0, mmcr0);
+}
+
+struct op_powerpc_model op_model_pa6t = {
+ .reg_setup = pa6t_reg_setup,
+ .cpu_setup = pa6t_cpu_setup,
+ .start = pa6t_start,
+ .stop = pa6t_stop,
+ .handle_interrupt = pa6t_handle_interrupt,
+};
#define SPRN_SIAR 780
#define SPRN_SDAR 781
-#define PA6T_SPRN_PMC0 787
-#define PA6T_SPRN_PMC1 788
-#define PA6T_SPRN_PMC2 789
-#define PA6T_SPRN_PMC3 790
-#define PA6T_SPRN_PMC4 791
-#define PA6T_SPRN_PMC5 792
+#define SPRN_PA6T_MMCR0 795
+#define PA6T_MMCR0_EN0 0x0000000000000001UL
+#define PA6T_MMCR0_EN1 0x0000000000000002UL
+#define PA6T_MMCR0_EN2 0x0000000000000004UL
+#define PA6T_MMCR0_EN3 0x0000000000000008UL
+#define PA6T_MMCR0_EN4 0x0000000000000010UL
+#define PA6T_MMCR0_EN5 0x0000000000000020UL
+#define PA6T_MMCR0_SUPEN 0x0000000000000040UL
+#define PA6T_MMCR0_PREN 0x0000000000000080UL
+#define PA6T_MMCR0_HYPEN 0x0000000000000100UL
+#define PA6T_MMCR0_FCM0 0x0000000000000200UL
+#define PA6T_MMCR0_FCM1 0x0000000000000400UL
+#define PA6T_MMCR0_INTGEN 0x0000000000000800UL
+#define PA6T_MMCR0_INTEN0 0x0000000000001000UL
+#define PA6T_MMCR0_INTEN1 0x0000000000002000UL
+#define PA6T_MMCR0_INTEN2 0x0000000000004000UL
+#define PA6T_MMCR0_INTEN3 0x0000000000008000UL
+#define PA6T_MMCR0_INTEN4 0x0000000000010000UL
+#define PA6T_MMCR0_INTEN5 0x0000000000020000UL
+#define PA6T_MMCR0_DISCNT 0x0000000000040000UL
+#define PA6T_MMCR0_UOP 0x0000000000080000UL
+#define PA6T_MMCR0_TRG 0x0000000000100000UL
+#define PA6T_MMCR0_TRGEN 0x0000000000200000UL
+#define PA6T_MMCR0_TRGREG 0x0000000001600000UL
+#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL
+#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL
+#define PA6T_MMCR0_PROEN 0x0000000008000000UL
+#define PA6T_MMCR0_PROLOG 0x0000000010000000UL
+#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL
+#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL
+#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL
+#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL
+#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL
+#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL
+#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL
+#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL
+#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL
+#define PA6T_MMCR0_PCTEN 0x0000004000000000UL
+#define PA6T_MMCR0_SOCEN 0x0000008000000000UL
+#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL
+
+#define SPRN_PA6T_MMCR1 798
+#define PA6T_MMCR1_ES2 0x00000000000000ffUL
+#define PA6T_MMCR1_ES3 0x000000000000ff00UL
+#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
+#define PA6T_MMCR1_ES5 0x00000000ff000000UL
+
+#define SPRN_PA6T_SIAR 780
+#define SPRN_PA6T_UPMC0 771
+#define SPRN_PA6T_UPMC1 772
+#define SPRN_PA6T_UPMC2 773
+#define SPRN_PA6T_UPMC3 774
+#define SPRN_PA6T_UPMC4 775
+#define SPRN_PA6T_UPMC5 776
+#define SPRN_PA6T_UMMCR0 779
+#define SPRN_PA6T_UMMCR1 782
+#define SPRN_PA6T_PMC0 787
+#define SPRN_PA6T_PMC1 788
+#define SPRN_PA6T_PMC2 789
+#define SPRN_PA6T_PMC3 790
+#define SPRN_PA6T_PMC4 791
+#define SPRN_PA6T_PMC5 792
#else /* 32-bit */
#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
projects / linux-2.6 / commitdiff