static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- extern int via_interrupt_line_quirk;
struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
'A' + pin, pci_name(dev), msg);
}
- /* VIA bridges use interrupt line for apic/pci steering across
- the V-Link */
- else if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
return 0;
}
u8 pin = 0;
int edge_level = ACPI_LEVEL_SENSITIVE;
int active_high_low = ACPI_ACTIVE_LOW;
- extern int via_interrupt_line_quirk;
char *link = NULL;
ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
}
}
- if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);
-
dev->irq = acpi_register_gsi(irq, edge_level, active_high_low);
printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/acpi.h>
#include "pci.h"
/* Deal with broken BIOS'es that neglect to enable passive release,
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
- *
- * TODO: When we have device-specific interrupt routers,
- * quirk_via_irqpic will go away from quirks.
*/
/*
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
+static void __devinit quirk_via_irqpic(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (nr_ioapics && !skip_ioapic_setup)
+ return;
+#endif
+#ifdef CONFIG_ACPI
+ if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
+ return;
+#endif
+ new_irq = dev->irq & 0xf;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+ pci_name(dev), irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+
/*
* PIIX3 USB: We have to disable USB interrupts that are
* hardwired to PIRQD# and may be shared with an
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
-/*
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
-
-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
-{
- if(pdev->devfn == 0) {
- printk(KERN_INFO "PCI: Via IRQ fixup\n");
- via_interrupt_line_quirk = 1;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
/*
* Serverworks CSB5 IDE does not fully support native mode