header-y += vsyscall32.h
unifdef-y += e820.h
-unifdef-y += elf_32.h
-unifdef-y += elf_64.h
unifdef-y += ist.h
unifdef-y += mce.h
unifdef-y += msgbuf_32.h
-#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-# include "elf_32.h"
-# else
-# include "elf_64.h"
-# endif
+#ifndef _ASM_X86_ELF_H
+#define _ASM_X86_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/auxvec.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+#ifdef __i386__
+
+typedef struct user_fxsr_struct elf_fpxregset_t;
+
+#define R_386_NONE 0
+#define R_386_32 1
+#define R_386_PC32 2
+#define R_386_GOT32 3
+#define R_386_PLT32 4
+#define R_386_COPY 5
+#define R_386_GLOB_DAT 6
+#define R_386_JMP_SLOT 7
+#define R_386_RELATIVE 8
+#define R_386_GOTOFF 9
+#define R_386_GOTPC 10
+#define R_386_NUM 11
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_386
+
#else
-# ifdef __i386__
-# include "elf_32.h"
-# else
-# include "elf_64.h"
-# endif
+
+/* x86-64 relocation types */
+#define R_X86_64_NONE 0 /* No reloc */
+#define R_X86_64_64 1 /* Direct 64 bit */
+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
+#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
+ offset to GOT */
+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM 16
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS64
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_X86_64
+
+#endif
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_X86_32
+#include <asm/processor.h>
+#include <asm/system.h> /* for savesegment */
+#include <asm/desc.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
+ contains a pointer to a function which might be registered using `atexit'.
+ This provides a mean for the dynamic linker to call DT_FINI functions for
+ shared libraries that have been loaded before the code runs.
+
+ A value of 0 tells we have no such handler.
+
+ We might as well make sure everything else is cleared too (except for %esp),
+ just to make things more deterministic.
+ */
+#define ELF_PLAT_INIT(_r, load_addr) do { \
+ _r->ebx = 0; _r->ecx = 0; _r->edx = 0; \
+ _r->esi = 0; _r->edi = 0; _r->ebp = 0; \
+ _r->eax = 0; \
+} while (0)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ now struct_user_regs, they are different) */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ pr_reg[0] = regs->ebx; \
+ pr_reg[1] = regs->ecx; \
+ pr_reg[2] = regs->edx; \
+ pr_reg[3] = regs->esi; \
+ pr_reg[4] = regs->edi; \
+ pr_reg[5] = regs->ebp; \
+ pr_reg[6] = regs->eax; \
+ pr_reg[7] = regs->xds & 0xffff; \
+ pr_reg[8] = regs->xes & 0xffff; \
+ pr_reg[9] = regs->xfs & 0xffff; \
+ savesegment(gs,pr_reg[10]); \
+ pr_reg[11] = regs->orig_eax; \
+ pr_reg[12] = regs->eip; \
+ pr_reg[13] = regs->xcs & 0xffff; \
+ pr_reg[14] = regs->eflags; \
+ pr_reg[15] = regs->esp; \
+ pr_reg[16] = regs->xss & 0xffff;
+
+#define ELF_PLATFORM (utsname()->machine)
+#define set_personality_64bit() do { } while (0)
+extern unsigned int vdso_enabled;
+
+#else /* CONFIG_X86_32 */
+
+#include <asm/processor.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ ((x)->e_machine == EM_X86_64)
+
+#define ELF_PLAT_INIT(_r, load_addr) do { \
+ struct task_struct *cur = current; \
+ (_r)->rbx = 0; (_r)->rcx = 0; (_r)->rdx = 0; \
+ (_r)->rsi = 0; (_r)->rdi = 0; (_r)->rbp = 0; \
+ (_r)->rax = 0; \
+ (_r)->r8 = 0; \
+ (_r)->r9 = 0; \
+ (_r)->r10 = 0; \
+ (_r)->r11 = 0; \
+ (_r)->r12 = 0; \
+ (_r)->r13 = 0; \
+ (_r)->r14 = 0; \
+ (_r)->r15 = 0; \
+ cur->thread.fs = 0; cur->thread.gs = 0; \
+ cur->thread.fsindex = 0; cur->thread.gsindex = 0; \
+ cur->thread.ds = 0; cur->thread.es = 0; \
+ clear_thread_flag(TIF_IA32); \
+} while (0)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ now struct_user_regs, they are different). Assumes current is the process
+ getting dumped. */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
+ unsigned v; \
+ (pr_reg)[0] = (regs)->r15; \
+ (pr_reg)[1] = (regs)->r14; \
+ (pr_reg)[2] = (regs)->r13; \
+ (pr_reg)[3] = (regs)->r12; \
+ (pr_reg)[4] = (regs)->rbp; \
+ (pr_reg)[5] = (regs)->rbx; \
+ (pr_reg)[6] = (regs)->r11; \
+ (pr_reg)[7] = (regs)->r10; \
+ (pr_reg)[8] = (regs)->r9; \
+ (pr_reg)[9] = (regs)->r8; \
+ (pr_reg)[10] = (regs)->rax; \
+ (pr_reg)[11] = (regs)->rcx; \
+ (pr_reg)[12] = (regs)->rdx; \
+ (pr_reg)[13] = (regs)->rsi; \
+ (pr_reg)[14] = (regs)->rdi; \
+ (pr_reg)[15] = (regs)->orig_rax; \
+ (pr_reg)[16] = (regs)->rip; \
+ (pr_reg)[17] = (regs)->cs; \
+ (pr_reg)[18] = (regs)->eflags; \
+ (pr_reg)[19] = (regs)->rsp; \
+ (pr_reg)[20] = (regs)->ss; \
+ (pr_reg)[21] = current->thread.fs; \
+ (pr_reg)[22] = current->thread.gs; \
+ asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v; \
+ asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v; \
+ asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v; \
+ asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v; \
+} while(0);
+
+/* I'm not sure if we can use '-' here */
+#define ELF_PLATFORM ("x86_64")
+extern void set_personality_64bit(void);
+extern int vdso_enabled;
+
+#endif /* !CONFIG_X86_32 */
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this CPU supports. This could be done in user space,
+ but it's not easy, and we've already done it here. */
+
+#define ELF_HWCAP (boot_cpu_data.x86_capability[0])
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo.
+
+ For the moment, we have only optimizations for the Intel generations,
+ but that could change... */
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality_64bit()
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack) \
+ (executable_stack != EXSTACK_DISABLE_X)
+
+struct task_struct;
+
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#ifdef CONFIG_X86_32
+extern int dump_task_extended_fpu (struct task_struct *,
+ struct user_fxsr_struct *);
+#define ELF_CORE_COPY_XFPREGS(tsk, elf_xfpregs) \
+ dump_task_extended_fpu(tsk, elf_xfpregs)
+#define ELF_CORE_XFPREG_TYPE NT_PRXFPREG
+
+#define VDSO_HIGH_BASE (__fix_to_virt(FIX_VDSO))
+#define VDSO_CURRENT_BASE ((unsigned long)current->mm->context.vdso)
+#define VDSO_PRELINK 0
+
+#define VDSO_SYM(x) \
+ (VDSO_CURRENT_BASE + (unsigned long)(x) - VDSO_PRELINK)
+
+#define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE)
+#define VDSO_EHDR ((const struct elfhdr *) VDSO_CURRENT_BASE)
+
+extern void __kernel_vsyscall;
+
+#define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall)
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+
+#define ARCH_DLINFO \
+do if (vdso_enabled) { \
+ NEW_AUX_ENT(AT_SYSINFO, VDSO_ENTRY); \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE); \
+} while (0)
+
+#else /* CONFIG_X86_32 */
+
+/* 1GB for 64bit, 8MB for 32bit */
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
+
+#define ARCH_DLINFO \
+do if (vdso_enabled) { \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR,(unsigned long)current->mm->context.vdso);\
+} while (0)
+
+#endif /* !CONFIG_X86_32 */
+
+struct linux_binprm;
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int executable_stack);
+
+#endif /* __KERNEL__ */
+
#endif
+++ /dev/null
-#ifndef __ASMi386_ELF_H
-#define __ASMi386_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/auxvec.h>
-
-#define R_386_NONE 0
-#define R_386_32 1
-#define R_386_PC32 2
-#define R_386_GOT32 3
-#define R_386_PLT32 4
-#define R_386_COPY 5
-#define R_386_GLOB_DAT 6
-#define R_386_JMP_SLOT 7
-#define R_386_RELATIVE 8
-#define R_386_GOTOFF 9
-#define R_386_GOTPC 10
-#define R_386_NUM 11
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-typedef struct user_fxsr_struct elf_fpxregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_386
-
-#ifdef __KERNEL__
-
-#include <asm/processor.h>
-#include <asm/system.h> /* for savesegment */
-#include <asm/desc.h>
-
-/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
- contains a pointer to a function which might be registered using `atexit'.
- This provides a mean for the dynamic linker to call DT_FINI functions for
- shared libraries that have been loaded before the code runs.
-
- A value of 0 tells we have no such handler.
-
- We might as well make sure everything else is cleared too (except for %esp),
- just to make things more deterministic.
- */
-#define ELF_PLAT_INIT(_r, load_addr) do { \
- _r->ebx = 0; _r->ecx = 0; _r->edx = 0; \
- _r->esi = 0; _r->edi = 0; _r->ebp = 0; \
- _r->eax = 0; \
-} while (0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- now struct_user_regs, they are different) */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- pr_reg[0] = regs->ebx; \
- pr_reg[1] = regs->ecx; \
- pr_reg[2] = regs->edx; \
- pr_reg[3] = regs->esi; \
- pr_reg[4] = regs->edi; \
- pr_reg[5] = regs->ebp; \
- pr_reg[6] = regs->eax; \
- pr_reg[7] = regs->xds & 0xffff; \
- pr_reg[8] = regs->xes & 0xffff; \
- pr_reg[9] = regs->xfs & 0xffff; \
- savesegment(gs,pr_reg[10]); \
- pr_reg[11] = regs->orig_eax; \
- pr_reg[12] = regs->eip; \
- pr_reg[13] = regs->xcs & 0xffff; \
- pr_reg[14] = regs->eflags; \
- pr_reg[15] = regs->esp; \
- pr_reg[16] = regs->xss & 0xffff;
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.x86_capability[0])
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (utsname()->machine)
-
-#define SET_PERSONALITY(ex, ibcs2) do { } while (0)
-
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically.
- */
-#define elf_read_implies_exec(ex, executable_stack) (executable_stack != EXSTACK_DISABLE_X)
-
-struct task_struct;
-
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-#define ELF_CORE_COPY_XFPREGS(tsk, elf_xfpregs) dump_task_extended_fpu(tsk, elf_xfpregs)
-#define ELF_CORE_XFPREG_TYPE NT_PRXFPREG
-
-#define VDSO_HIGH_BASE (__fix_to_virt(FIX_VDSO))
-#define VDSO_CURRENT_BASE ((unsigned long)current->mm->context.vdso)
-#define VDSO_PRELINK 0
-
-#define VDSO_SYM(x) \
- (VDSO_CURRENT_BASE + (unsigned long)(x) - VDSO_PRELINK)
-
-#define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE)
-#define VDSO_EHDR ((const struct elfhdr *) VDSO_CURRENT_BASE)
-
-extern void __kernel_vsyscall;
-
-#define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall)
-
-struct linux_binprm;
-
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int executable_stack);
-
-extern unsigned int vdso_enabled;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO \
-do if (vdso_enabled) { \
- NEW_AUX_ENT(AT_SYSINFO, VDSO_ENTRY); \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE); \
-} while (0)
-
-#endif
-
-#endif
+++ /dev/null
-#ifndef __ASM_X86_64_ELF_H
-#define __ASM_X86_64_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* x86-64 relocation types */
-#define R_X86_64_NONE 0 /* No reloc */
-#define R_X86_64_64 1 /* Direct 64 bit */
-#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
-#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
-#define R_X86_64_PLT32 4 /* 32 bit PLT address */
-#define R_X86_64_COPY 5 /* Copy symbol at runtime */
-#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
-#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
-#define R_X86_64_RELATIVE 8 /* Adjust by program base */
-#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
- offset to GOT */
-#define R_X86_64_32 10 /* Direct 32 bit zero extended */
-#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
-#define R_X86_64_16 12 /* Direct 16 bit zero extended */
-#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
-#define R_X86_64_8 14 /* Direct 8 bit sign extended */
-#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
-
-#define R_X86_64_NUM 16
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS64
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_X86_64
-
-#ifdef __KERNEL__
-#include <asm/processor.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- ((x)->e_machine == EM_X86_64)
-
-
-/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
- contains a pointer to a function which might be registered using `atexit'.
- This provides a mean for the dynamic linker to call DT_FINI functions for
- shared libraries that have been loaded before the code runs.
-
- A value of 0 tells we have no such handler.
-
- We might as well make sure everything else is cleared too (except for %esp),
- just to make things more deterministic.
- */
-#define ELF_PLAT_INIT(_r, load_addr) do { \
- struct task_struct *cur = current; \
- (_r)->rbx = 0; (_r)->rcx = 0; (_r)->rdx = 0; \
- (_r)->rsi = 0; (_r)->rdi = 0; (_r)->rbp = 0; \
- (_r)->rax = 0; \
- (_r)->r8 = 0; \
- (_r)->r9 = 0; \
- (_r)->r10 = 0; \
- (_r)->r11 = 0; \
- (_r)->r12 = 0; \
- (_r)->r13 = 0; \
- (_r)->r14 = 0; \
- (_r)->r15 = 0; \
- cur->thread.fs = 0; cur->thread.gs = 0; \
- cur->thread.fsindex = 0; cur->thread.gsindex = 0; \
- cur->thread.ds = 0; cur->thread.es = 0; \
- clear_thread_flag(TIF_IA32); \
-} while (0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- now struct_user_regs, they are different). Assumes current is the process
- getting dumped. */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
- unsigned v; \
- (pr_reg)[0] = (regs)->r15; \
- (pr_reg)[1] = (regs)->r14; \
- (pr_reg)[2] = (regs)->r13; \
- (pr_reg)[3] = (regs)->r12; \
- (pr_reg)[4] = (regs)->rbp; \
- (pr_reg)[5] = (regs)->rbx; \
- (pr_reg)[6] = (regs)->r11; \
- (pr_reg)[7] = (regs)->r10; \
- (pr_reg)[8] = (regs)->r9; \
- (pr_reg)[9] = (regs)->r8; \
- (pr_reg)[10] = (regs)->rax; \
- (pr_reg)[11] = (regs)->rcx; \
- (pr_reg)[12] = (regs)->rdx; \
- (pr_reg)[13] = (regs)->rsi; \
- (pr_reg)[14] = (regs)->rdi; \
- (pr_reg)[15] = (regs)->orig_rax; \
- (pr_reg)[16] = (regs)->rip; \
- (pr_reg)[17] = (regs)->cs; \
- (pr_reg)[18] = (regs)->eflags; \
- (pr_reg)[19] = (regs)->rsp; \
- (pr_reg)[20] = (regs)->ss; \
- (pr_reg)[21] = current->thread.fs; \
- (pr_reg)[22] = current->thread.gs; \
- asm("movl %%ds,%0" : "=r" (v)); (pr_reg)[23] = v; \
- asm("movl %%es,%0" : "=r" (v)); (pr_reg)[24] = v; \
- asm("movl %%fs,%0" : "=r" (v)); (pr_reg)[25] = v; \
- asm("movl %%gs,%0" : "=r" (v)); (pr_reg)[26] = v; \
-} while(0);
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (boot_cpu_data.x86_capability[0])
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-/* I'm not sure if we can use '-' here */
-#define ELF_PLATFORM ("x86_64")
-
-extern void set_personality_64bit(void);
-#define SET_PERSONALITY(ex, ibcs2) set_personality_64bit()
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically.
- */
-#define elf_read_implies_exec(ex, executable_stack) (executable_stack != EXSTACK_DISABLE_X)
-
-struct task_struct;
-
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
-/* 1GB for 64bit, 8MB for 32bit */
-#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
-
-
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int executable_stack);
-
-extern int vdso_enabled;
-
-#define ARCH_DLINFO \
-do if (vdso_enabled) { \
- NEW_AUX_ENT(AT_SYSINFO_EHDR,(unsigned long)current->mm->context.vdso);\
-} while (0)
-
-#endif
-
-#endif
projects / linux-2.6 / commitdiff