USB: New PhidgetKit 8/8/8 reset outputs after 2 seconds

New phidget interface kits (type 8/8/8) reset their outputs if they
haven't received a set report for 2 seconds.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index 9a8d137d39f91d75dd9273ba16ef13adfbf6ffa6..78e419904abf361d3463abc625d29fe6c7b32ae3 100644 (file)
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -44,20 +44,25 @@ struct driver_interfacekit {
        int inputs;
        int outputs;
        int has_lcd;
+       int amnesiac;
 };
-#define ifkit(_sensors, _inputs, _outputs, _lcd)                       \
-static struct driver_interfacekit ph_##_sensors##_inputs##_outputs = { \
+
+#define ifkit(_sensors, _inputs, _outputs, _lcd, _amnesiac)            \
+{                                                                      \
        .sensors        = _sensors,                                     \
        .inputs         = _inputs,                                      \
        .outputs        = _outputs,                                     \
        .has_lcd        = _lcd,                                         \
+       .amnesiac       = _amnesiac                                     \
 };
-ifkit(0, 0, 4, 0);
-ifkit(8, 8, 8, 0);
-ifkit(0, 4, 7, 1);
-ifkit(8, 8, 4, 0);
-ifkit(0, 8, 8, 1);
-ifkit(0, 16, 16, 0);
+
+static const struct driver_interfacekit ph_004 = ifkit(0, 0, 4, 0, 0);
+static const struct driver_interfacekit ph_888n = ifkit(8, 8, 8, 0, 1);
+static const struct driver_interfacekit ph_888o = ifkit(8, 8, 8, 0, 0);
+static const struct driver_interfacekit ph_047 = ifkit(0, 4, 7, 1, 0);
+static const struct driver_interfacekit ph_884 = ifkit(8, 8, 4, 0, 0);
+static const struct driver_interfacekit ph_088 = ifkit(0, 8, 8, 1, 0);
+static const struct driver_interfacekit ph_01616 = ifkit(0, 16, 16, 0, 0);
 
 static unsigned long device_no;
 
@@ -77,6 +82,7 @@ struct interfacekit {
        dma_addr_t data_dma;
 
        struct work_struct do_notify;
+       struct work_struct do_resubmit;
        unsigned long input_events;
        unsigned long sensor_events;
 };
@@ -84,8 +90,10 @@ struct interfacekit {
 static struct usb_device_id id_table[] = {
        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004),
                .driver_info = (kernel_ulong_t)&ph_004},
-       {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888),
-               .driver_info = (kernel_ulong_t)&ph_888},
+       {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0, 0x814),
+               .driver_info = (kernel_ulong_t)&ph_888o},
+       {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0x0815, 0xffff),
+               .driver_info = (kernel_ulong_t)&ph_888n},
        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047),
                .driver_info = (kernel_ulong_t)&ph_047},
        {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088),
@@ -98,16 +106,11 @@ static struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static int change_outputs(struct interfacekit *kit, int output_num, int enable)
+static int set_outputs(struct interfacekit *kit)
 {
        u8 *buffer;
        int retval;
 
-       if (enable)
-               set_bit(output_num, &kit->outputs);
-       else
-               clear_bit(output_num, &kit->outputs);
-
        buffer = kzalloc(4, GFP_KERNEL);
        if (!buffer) {
                dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__);
@@ -127,6 +130,9 @@ static int change_outputs(struct interfacekit *kit, int output_num, int enable)
                                retval);
        kfree(buffer);
 
+       if (kit->ifkit->amnesiac)
+               schedule_delayed_work(&kit->do_resubmit, HZ / 2);
+
        return retval < 0 ? retval : 0;
 }
 
@@ -399,19 +405,29 @@ static void do_notify(void *data)
        }
 }
 
+static void do_resubmit(void *data)
+{
+       set_outputs(data);
+}
+
 #define show_set_output(value)         \
 static ssize_t set_output##value(struct device *dev,                   \
                                        struct device_attribute *attr,  \
                                        const char *buf, size_t count)  \
 {                                                                      \
        struct interfacekit *kit = dev_get_drvdata(dev);                \
-       int enabled;                                                    \
+       int enable;                                                     \
        int retval;                                                     \
                                                                        \
-       if (sscanf(buf, "%d", &enabled) < 1)                            \
+       if (sscanf(buf, "%d", &enable) < 1)                             \
                return -EINVAL;                                         \
                                                                        \
-       retval = change_outputs(kit, value - 1, enabled);               \
+       if (enable)                                                     \
+               set_bit(value - 1, &kit->outputs);                      \
+       else                                                            \
+               clear_bit(value - 1, &kit->outputs);                    \
+                                                                       \
+       retval = set_outputs(kit);                                      \
                                                                        \
        return retval ? retval : count;                                 \
 }                                                                      \
@@ -560,6 +576,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic
        kit->udev = usb_get_dev(dev);
        kit->intf = intf;
        INIT_WORK(&kit->do_notify, do_notify, kit);
+       INIT_WORK(&kit->do_resubmit, do_resubmit, kit);
        usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data,
                        maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
                        interfacekit_irq, kit, endpoint->bInterval);
@@ -663,6 +680,7 @@ static void interfacekit_disconnect(struct usb_interface *interface)
        usb_buffer_free(kit->udev, URB_INT_SIZE, kit->data, kit->data_dma);
 
        cancel_delayed_work(&kit->do_notify);
+       cancel_delayed_work(&kit->do_resubmit);
 
        for (i=0; i<kit->ifkit->outputs; i++)
                device_remove_file(kit->dev, &dev_output_attrs[i]);