ide: remove ata_status_t and atapi_status_t

Remove ata_status_t (unused) and atapi_status_t.

While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 53f90257a8f0d5ec323069e2615916fae018440d..7b94c7aff25650cff8d94e021db10e87dcd80ca1 100644 (file)
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -788,12 +788,12 @@ static void idefloppy_retry_pc (ide_drive_t *drive)
 static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
 {
        idefloppy_floppy_t *floppy = drive->driver_data;
-       atapi_status_t status;
        atapi_bcount_t bcount;
        atapi_ireason_t ireason;
        idefloppy_pc_t *pc = floppy->pc;
        struct request *rq = pc->rq;
        unsigned int temp;
+       u8 stat;
 
        debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
                __FUNCTION__);
@@ -809,16 +809,16 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
        }
 
        /* Clear the interrupt */
-       status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+       stat = drive->hwif->INB(IDE_STATUS_REG);
 
-       if (!status.b.drq) {                    /* No more interrupts */
+       if ((stat & DRQ_STAT) == 0) {           /* No more interrupts */
                debug_log(KERN_INFO "Packet command completed, %d bytes "
                        "transferred\n", pc->actually_transferred);
                clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
 
                local_irq_enable_in_hardirq();
 
-               if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) {
+               if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
                        /* Error detected */
                        debug_log(KERN_INFO "ide-floppy: %s: I/O error\n",
                                drive->name);
@@ -1632,14 +1632,14 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
                /* Else assume format_unit has finished, and we're
                ** at 0x10000 */
        } else {
-               atapi_status_t status;
                unsigned long flags;
+               u8 stat;
 
                local_irq_save(flags);
-               status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+               stat = drive->hwif->INB(IDE_STATUS_REG);
                local_irq_restore(flags);
 
-               progress_indication = !status.b.dsc ? 0 : 0x10000;
+               progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
        }
        if (put_user(progress_indication, arg))
                return (-EFAULT);

diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 3bae2c46924f216e5fffeb174c4134b7099c28ac..dc7e539b4d0bee20fcc416ff41f1a74504adb90a 100644 (file)
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -562,27 +562,24 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat)
 static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat)
 {
        unsigned long flags;
-
-       atapi_status_t status;
        atapi_error_t error;
 
-       status.all = stat;
        error.all = 0;
        local_irq_save(flags);
        printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
-       if (status.b.bsy)
+       if (stat & BUSY_STAT)
                printk("Busy ");
        else {
-               if (status.b.drdy)      printk("DriveReady ");
-               if (status.b.df)        printk("DeviceFault ");
-               if (status.b.dsc)       printk("SeekComplete ");
-               if (status.b.drq)       printk("DataRequest ");
-               if (status.b.corr)      printk("CorrectedError ");
-               if (status.b.idx)       printk("Index ");
-               if (status.b.check)     printk("Error ");
+               if (stat & READY_STAT)  printk("DriveReady ");
+               if (stat & WRERR_STAT)  printk("DeviceFault ");
+               if (stat & SEEK_STAT)   printk("SeekComplete ");
+               if (stat & DRQ_STAT)    printk("DataRequest ");
+               if (stat & ECC_STAT)    printk("CorrectedError ");
+               if (stat & INDEX_STAT)  printk("Index ");
+               if (stat & ERR_STAT)    printk("Error ");
        }
        printk("}\n");
-       if (status.b.check && !status.b.bsy) {
+       if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
                error.all = HWIF(drive)->INB(IDE_ERROR_REG);
                printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all);
                if (error.b.ili)        printk("IllegalLengthIndication ");

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 90e902d233cf41a24b428c7194337bfd833a9e0a..c910395054363cf8b4b57bf140654d0df487daf5 100644 (file)
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1848,15 +1848,14 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 {
        ide_hwif_t *hwif = drive->hwif;
        idetape_tape_t *tape = drive->driver_data;
-       atapi_status_t status;
        atapi_bcount_t bcount;
        atapi_ireason_t ireason;
        idetape_pc_t *pc = tape->pc;
-
        unsigned int temp;
 #if SIMULATE_ERRORS
        static int error_sim_count = 0;
 #endif
+       u8 stat;
 
 #if IDETAPE_DEBUG_LOG
        if (tape->debug_level >= 4)
@@ -1865,10 +1864,10 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
 #endif /* IDETAPE_DEBUG_LOG */ 
 
        /* Clear the interrupt */
-       status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+       stat = hwif->INB(IDE_STATUS_REG);
 
        if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
-               if (HWIF(drive)->ide_dma_end(drive) || status.b.check) {
+               if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
                        /*
                         * A DMA error is sometimes expected. For example,
                         * if the tape is crossing a filemark during a
@@ -1902,7 +1901,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
        }
 
        /* No more interrupts */
-       if (!status.b.drq) {
+       if ((stat & DRQ_STAT) == 0) {
 #if IDETAPE_DEBUG_LOG
                if (tape->debug_level >= 2)
                        printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred);
@@ -1917,12 +1916,13 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
                    (++error_sim_count % 100) == 0) {
                        printk(KERN_INFO "ide-tape: %s: simulating error\n",
                                tape->name);
-                       status.b.check = 1;
+                       stat |= ERR_STAT;
                }
 #endif
-               if (status.b.check && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD)
-                       status.b.check = 0;
-               if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) {     /* Error detected */
+               if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD)
+                       stat &= ~ERR_STAT;
+               if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+                       /* Error detected */
 #if IDETAPE_DEBUG_LOG
                        if (tape->debug_level >= 1)
                                printk(KERN_INFO "ide-tape: %s: I/O error\n",
@@ -1941,7 +1941,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
                }
                pc->error = 0;
                if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
-                   !status.b.dsc) {
+                   (stat & SEEK_STAT) == 0) {
                        /* Media access command */
                        tape->dsc_polling_start = jiffies;
                        tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST;
@@ -2285,11 +2285,11 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive)
 {
        idetape_tape_t *tape = drive->driver_data;
        idetape_pc_t *pc = tape->pc;
-       atapi_status_t status;
+       u8 stat;
 
-       status.all = HWIF(drive)->INB(IDE_STATUS_REG);
-       if (status.b.dsc) {
-               if (status.b.check) {
+       stat = drive->hwif->INB(IDE_STATUS_REG);
+       if (stat & SEEK_STAT) {
+               if (stat & ERR_STAT) {
                        /* Error detected */
                        if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD)
                                printk(KERN_ERR "ide-tape: %s: I/O error, ",
@@ -2407,7 +2407,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
        idetape_tape_t *tape = drive->driver_data;
        idetape_pc_t *pc = NULL;
        struct request *postponed_rq = tape->postponed_rq;
-       atapi_status_t status;
+       u8 stat;
 
 #if IDETAPE_DEBUG_LOG
 #if 0
@@ -2455,7 +2455,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
         * If the tape is still busy, postpone our request and service
         * the other device meanwhile.
         */
-       status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+       stat = drive->hwif->INB(IDE_STATUS_REG);
 
        if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
                set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
@@ -2471,7 +2471,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
                tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
        calculate_speeds(drive);
        if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
-           !status.b.dsc) {
+           (stat & SEEK_STAT) == 0) {
                if (postponed_rq == NULL) {
                        tape->dsc_polling_start = jiffies;
                        tape->dsc_polling_frequency = tape->best_dsc_rw_frequency;

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 9706de9d98d51969044a68f8cf0663fac4dde80e..bd2b56912472d5b0f13d098b053e64381750017a 100644 (file)
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -398,11 +398,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
        idescsi_pc_t *pc=scsi->pc;
        struct request *rq = pc->rq;
        atapi_bcount_t bcount;
-       atapi_status_t status;
        atapi_ireason_t ireason;
        atapi_feature_t feature;
-
        unsigned int temp;
+       u8 stat;
 
 #if IDESCSI_DEBUG_LOG
        printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
@@ -427,14 +426,14 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 
        feature.all = 0;
        /* Clear the interrupt */
-       status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+       stat = drive->hwif->INB(IDE_STATUS_REG);
 
-       if (!status.b.drq) {
+       if ((stat & DRQ_STAT) == 0) {
                /* No more interrupts */
                if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
                        printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred);
                local_irq_enable_in_hardirq();
-               if (status.b.check)
+               if (stat & ERR_STAT)
                        rq->errors++;
                idescsi_end_request (drive, 1, 0);
                return ide_stopped;

diff --git a/include/linux/ide.h b/include/linux/ide.h
index c6ffc2028fb5b980772b1ec7ac9892cfee93c392..921cf717f22a20cc3849408355b68933b7959e8a 100644 (file)
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -365,50 +365,6 @@ typedef union {
        } b;
 } select_t, ata_select_t;
 
-/*
- * The ATA-IDE Status Register.
- * The ATAPI Status Register.
- *
- * check       : Error occurred
- * idx         : Index Error
- * corr                : Correctable error occurred
- * drq         : Data is request by the device
- * dsc         : Disk Seek Complete                    : ata
- *             : Media access command finished         : atapi
- * df          : Device Fault                          : ata
- *             : Reserved                              : atapi
- * drdy                : Ready, Command Mode Capable           : ata
- *             : Ignored for ATAPI commands            : atapi
- * bsy         : Disk is Busy
- *             : The device has access to the command block
- */
-typedef union {
-       unsigned all                    :8;
-       struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-               unsigned check          :1;
-               unsigned idx            :1;
-               unsigned corr           :1;
-               unsigned drq            :1;
-               unsigned dsc            :1;
-               unsigned df             :1;
-               unsigned drdy           :1;
-               unsigned bsy            :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-               unsigned bsy            :1;
-               unsigned drdy           :1;
-               unsigned df             :1;
-               unsigned dsc            :1;
-               unsigned drq            :1;
-               unsigned corr           :1;
-               unsigned idx            :1;
-               unsigned check          :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-       } b;
-} ata_status_t, atapi_status_t;
-
 /*
  * ATAPI Feature Register
  *