]> err.no Git - linux-2.6/commitdiff
V4L/DVB (7596): em28xx-dvb: Add support for HVR950
authorMauro Carvalho Chehab <mchehab@infradead.org>
Fri, 18 Apr 2008 00:37:40 +0000 (21:37 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 24 Apr 2008 17:09:41 +0000 (14:09 -0300)
This patch adds DVB support for Hauppauge HVR950.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/em28xx/Kconfig
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-dvb.c

index 2b47a9bd0b65221a32a3c4c902eb695addc54978..4818cda389137acc05a4660762ea889e999984ee 100644 (file)
@@ -31,6 +31,7 @@ config VIDEO_EM28XX_ALSA
 config VIDEO_EM28XX_DVB
        tristate "DVB/ATSC Support for em28xx based TV cards"
        depends on VIDEO_EM28XX && DVB_CORE
+       select DVB_LGDT330X if !DVB_FE_CUSTOMISE
        select VIDEOBUF_DVB
        select FW_LOADER
        ---help---
index c907d6a5a05663bb3b30687e05e9e07dd3222a11..710f110b6e8ac5f0fa6b1c84aa3b92be6eb7818f 100644 (file)
@@ -180,6 +180,7 @@ struct em28xx_board em28xx_boards[] = {
                .tuner_type     = TUNER_XC2028,
                .mts_firmware   = 1,
                .has_12mhz_i2s  = 1,
+               .has_dvb        = 1,
                .decoder        = EM28XX_TVP5150,
                .input          = { {
                        .type     = EM28XX_VMUX_TELEVISION,
@@ -194,6 +195,32 @@ struct em28xx_board em28xx_boards[] = {
                        .vmux     = TVP5150_SVIDEO,
                        .amux     = 1,
                } },
+               .analog_gpio = {
+                       {               /* xc3028 reset seq */
+                               .reg = 0x08,
+                               .val = 0x3d,
+                               .rst = 0x2d,
+                               .t1 = 5,
+                               .t2 = 10,
+                               .t3 = 5,
+                       },
+               },
+               .digital_gpio = {
+                       {               /* xc3028 reset seq */
+                               .reg = 0x08,
+                               .val = 0x3e,
+                               .rst = 0x2e,
+                               .t1 = 6,
+                               .t2 = 6,
+                               .t3 = 6,
+                       }, {            /* demod reset seq */
+                               .reg = 0x04,
+                               .val = 0x0c,
+                               .rst = 0x04,
+                               .t2 = 10,
+                               .t3 = 10,
+                       }
+               },
        },
        [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
                .name         = "Terratec Hybrid XS",
@@ -521,7 +548,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
        /* Put xc2028 tuners and demods into a sane state */
        if (dev->tuner_type == TUNER_XC2028) {
-               dev->mode = EM28XX_DIGITAL_MODE;
+               dev->mode = EM28XX_ANALOG_MODE;
                em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
        };
 }
index 1ffe64f620950bb896400efb1f471a7a50653c02..1645021191a8049c2780fa631512eac86f96d7b9 100644 (file)
@@ -58,7 +58,10 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
 
 /* ------------------------------------------------------------------ */
 
-/* Add demods here */
+static struct lgdt330x_config em2880_lgdt3303_dev = {
+       .demod_address = 0x0e,
+       .demod_chip = LGDT3303,
+};
 
 /* ------------------------------------------------------------------ */
 
@@ -70,6 +73,7 @@ static int attach_xc3028(u8 addr, struct em28xx *dev)
                .i2c_adap  = &dev->i2c_adap,
                .i2c_addr  = addr,
                .ctrl      = &ctl,
+               .callback  = em28xx_tuner_callback,
        };
 
        if (!dev->dvb.frontend) {
@@ -109,6 +113,17 @@ static int dvb_init(struct em28xx *dev)
 
        /* init frontend */
        switch (dev->model) {
+       case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+               /* Enable lgdt330x */
+               dev->mode = EM28XX_ANALOG_MODE;
+               em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
+
+               dev->dvb.frontend = dvb_attach(lgdt330x_attach,
+                                              &em2880_lgdt3303_dev,
+                                              &dev->i2c_adap);
+               if (attach_xc3028(0x61, dev) < 0)
+                       return -EINVAL;
+               break;
        default:
                printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
                                " isn't supported yet\n",