V4L/DVB (4985): Update cx2341x documentation.

Removed a few unimplemented commands. Added a note for a few fields that are
not implemented in the firmware, and clarified several issues around reverse
playback.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/Documentation/video4linux/cx2341x/fw-decoder-api.txt b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
index 15c388b8bd195efaa57ca780af1c50687194d739..1345d267c5fce85c2098f3a764c2e198f961e49c 100644 (file)
--- a/Documentation/video4linux/cx2341x/fw-decoder-api.txt
+++ b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
@@ -21,7 +21,7 @@ Param[0]
        0 based frame number in GOP to begin playback from.
 Param[1]
        Specifies the number of muted audio frames to play before normal
-       audio resumes.
+       audio resumes. (This is not implemented in the firmware, leave at 0)
 
 -------------------------------------------------------------------------------
 
@@ -64,7 +64,7 @@ Param[0]
            31   Speed:
                     '0' slow
                     '1' fast
-       Note: n seems to be limited to 2. Anything higher does not result in
+       Note: n is limited to 2. Anything higher does not result in
        faster playback. Instead the host should start dropping frames.
 Param[1]
        Direction: 0=forward, 1=reverse
@@ -77,15 +77,16 @@ Param[2]
            7=I, P, B frames
 Param[3]
        B frames per GOP (for reverse play only)
-       Note: apparently this does not work. For reverse play I can only make it
-       work by selecting I or I and P frames in the Picture mask.
+       Note: for reverse playback the Picture Mask should be set to I or I, P.
+       Adding B frames to the mask will result in corrupt video. This field
+       has to be set to the correct value in order to keep the timing correct.
 Param[4]
        Mute audio: 0=disable, 1=enable
 Param[5]
        Display 0=frame, 1=field
 Param[6]
        Specifies the number of muted audio frames to play before normal audio
-       resumes.
+       resumes. (Not implemented in the firmware, leave at 0)
 
 -------------------------------------------------------------------------------
 
@@ -287,43 +288,6 @@ Param[3]
 
 -------------------------------------------------------------------------------
 
-Name   CX2341X_DEC_SET_AUDIO_OUTPUT
-Enum   27/0x1B
-Description
-       Select audio output format
-Param[0]
-       Bitmask:
-            0:1  Data size:
-                     '00' 16 bit
-                     '01' 20 bit
-                     '10' 24 bit
-            2:7  Unused
-            8:9  Mode:
-                     '00' 2 channels
-                     '01' 4 channels
-                     '10' 6 channels
-                     '11' 6 channels with one line data mode
-                          (for left justified MSB first mode, 20 bit only)
-           10:11 Unused
-           12:13 Channel format:
-                     '00' right justified MSB first mode
-                     '01' left justified MSB first mode
-                     '10' I2S mode
-           14:15 Unused
-           16:21 Right justify bit count
-           22:31 Unused
-
--------------------------------------------------------------------------------
-
-Name   CX2341X_DEC_SET_AV_DELAY
-Enum   28/0x1C
-Description
-       Set audio/video delay in 90Khz ticks
-Param[0]
-       0=A/V in sync, negative=audio lags, positive=video lags
-
--------------------------------------------------------------------------------
-
 Name   CX2341X_DEC_SET_PREBUFFERING
 Enum   30/0x1E
 Description

diff --git a/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
index 15df0df57dddb284974180e92d3b864b0f5661e1..9a5710646778ef38856d229c42a8d8c8a6e95d27 100644 (file)
--- a/Documentation/video4linux/cx2341x/fw-encoder-api.txt
+++ b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
@@ -216,7 +216,7 @@ Param[1]
 Name   CX2341X_ENC_SET_3_2_PULLDOWN
 Enum   177/0xB1
 Description
-       3:2 pulldown properties
+       3:2 pulldown properties (This command is not implemented in the firmware)
 Param[0]
        0=enabled
        1=disabled