[PATCH] ARM: 2832/1: BAST - limit clock-rate for IIC bus

Patch from Ben Dooks

The default clock rate does not specify a maximum, so the
default of 400KHz is used. This rate is too fast for the PMU
on the EB2410ITX, so we now specify platform data with a rate
of around 100KHz.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e7f343822d0c5c111d5988bcb0eeeb4126ad7bc..e9182242da95be91ebe9dfc5f389c0a3318d8a5e 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -30,6 +30,7 @@
  *     28-Jun-2005 BJD  Moved pm functionality out to common code
  *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
  *     25-Jul-2005 BJD  Removed ASIX static mappings
+ *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
 */
 
 #include <linux/kernel.h>
@@ -60,6 +61,7 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/nand.h>
+#include <asm/arch/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -304,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-       .tacls          = 80,
+       .tacls          = 40,
        .twrph0         = 80,
        .twrph1         = 80,
        .nr_sets        = ARRAY_SIZE(bast_nand_sets),
@@ -385,6 +387,17 @@ static struct platform_device bast_sio = {
        },
 };
 
+/* we have devices on the bus which cannot work much over the
+ * standard 100KHz i2c bus frequency
+*/
+
+static struct s3c2410_platform_i2c bast_i2c_info = {
+       .flags          = 0,
+       .slave_addr     = 0x10,
+       .bus_freq       = 100*1000,
+       .max_freq       = 130*1000,
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -431,6 +444,7 @@ void __init bast_map_io(void)
        s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
        s3c_device_nand.dev.platform_data = &bast_nand_info;
+       s3c_device_i2c.dev.platform_data = &bast_i2c_info;
 
        s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
        s3c24xx_init_clocks(0);