vp->product_name, dev)) return -EAGAIN;
enable_dma(dev->dma);
set_dma_mode(dev->dma, DMA_MODE_CASCADE);
- } else if (request_irq(dev->irq, &corkscrew_interrupt, SA_SHIRQ,
+ } else if (request_irq(dev->irq, &corkscrew_interrupt, IRQF_SHARED,
vp->product_name, dev)) {
return -EAGAIN;
}
elmc_id_attn586(); /* disable interrupts */
- ret = request_irq(dev->irq, &elmc_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM,
+ ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
* Grab the IRQ
*/
- err = request_irq(dev->irq, &mc32_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, dev);
+ err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
if (err) {
release_region(dev->base_addr, MC32_IO_EXTENT);
printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
pci_enable_device(pdev);
pci_set_master(pdev);
if (request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev)) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
pci_disable_device(pdev);
return -EBUSY;
/* Use the now-standard shared IRQ implementation. */
if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, SA_SHIRQ, dev->name, dev))) {
+ &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
goto out;
}
cp_init_hw(cp);
- rc = request_irq(dev->irq, cp_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, cp_interrupt, IRQF_SHARED, dev->name, dev);
if (rc)
goto err_out_hw;
int retval;
void __iomem *ioaddr = tp->mmio_addr;
- retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;
ll->rdp = LE_C0_STOP;
/* Install the Interrupt handler */
- ret = request_irq(IRQ_AMIGA_PORTS, lance_interrupt, SA_SHIRQ,
+ ret = request_irq(IRQ_AMIGA_PORTS, lance_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret) return ret;
goto init_error;
}
- ecode = request_irq(pdev->irq, ace_interrupt, SA_SHIRQ,
+ ecode = request_irq(pdev->irq, ace_interrupt, IRQF_SHARED,
DRV_NAME, dev);
if (ecode) {
printk(KERN_WARNING "%s: Requested IRQ %d is busy\n",
{
struct amd8111e_priv *lp = netdev_priv(dev);
- if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, SA_SHIRQ,
+ if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
dev->name, dev))
return -EAGAIN;
dev->base_addr = ioaddr;
/* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, SA_SHIRQ, DRV_NAME, dev);
+ i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
goto out_port;
}
- if ((err = com20020_found(dev, SA_SHIRQ)) != 0)
+ if ((err = com20020_found(dev, IRQF_SHARED)) != 0)
goto out_port;
return 0;
netif_start_queue(dev);
- i = request_irq(IRQ_AMIGA_PORTS, ariadne_interrupt, SA_SHIRQ,
+ i = request_irq(IRQ_AMIGA_PORTS, ariadne_interrupt, IRQF_SHARED,
dev->name, dev);
if (i) return i;
b44_check_phy(bp);
- err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
+ err = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (unlikely(err < 0)) {
b44_chip_reset(bp);
b44_free_rings(bp);
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev))
printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
spin_lock_irq(&bp->lock);
}
else {
rc = request_irq(bp->pdev->irq, bnx2_interrupt,
- SA_SHIRQ, dev->name, dev);
+ IRQF_SHARED, dev->name, dev);
}
}
else {
- rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ,
+ rc = request_irq(bp->pdev->irq, bnx2_interrupt, IRQF_SHARED,
dev->name, dev);
}
if (rc) {
if (!rc) {
rc = request_irq(bp->pdev->irq, bnx2_interrupt,
- SA_SHIRQ, dev->name, dev);
+ IRQF_SHARED, dev->name, dev);
}
if (rc) {
bnx2_free_skbs(bp);
* mapping to expose them
*/
if (request_irq(cp->pdev->irq, cas_interrupt,
- SA_SHIRQ, dev->name, (void *) dev)) {
+ IRQF_SHARED, dev->name, (void *) dev)) {
printk(KERN_ERR "%s: failed to request irq !\n",
cp->dev->name);
err = -EAGAIN;
t1_interrupts_clear(adapter);
if ((err = request_irq(adapter->pdev->irq,
- t1_select_intr_handler(adapter), SA_SHIRQ,
+ t1_select_intr_handler(adapter), IRQF_SHARED,
adapter->name, adapter))) {
goto out_err;
}
/* allocate the irq corresponding to the receiving DMA */
if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
- SA_SAMPLE_RANDOM, cardname, (void *)dev)) {
+ IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
goto grace_exit0;
}
/* Register IRQ - support shared interrupts by passing device ptr */
- ret = request_irq(dev->irq, dfx_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
return ret;
if (priv->plxreg)
OUTL(dev->base_addr + PLX_LCL2PCI_DOORBELL, 1);
- rc = request_irq(dev->irq, &dgrs_intr, SA_SHIRQ, "RightSwitch", dev);
+ rc = request_irq(dev->irq, &dgrs_intr, IRQF_SHARED, "RightSwitch", dev);
if (rc)
goto err_out;
int i;
u16 macctrl;
- i = request_irq (dev->irq, &rio_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq (dev->irq, &rio_interrupt, IRQF_SHARED, dev->name, dev);
if (i)
return i;
PRINTK2("entering dm9000_open\n");
- if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
/* Initialize DM9000 board */
e100_set_multicast_list(nic->netdev);
e100_start_receiver(nic, NULL);
mod_timer(&nic->watchdog, jiffies);
- if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ,
+ if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
nic->netdev->name, nic->netdev)))
goto err_no_irq;
netif_wake_queue(nic->netdev);
*data = 0;
/* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name,
- netdev)) {
+ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, netdev)) {
shared_int = FALSE;
- } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
netdev->name, netdev)){
*data = 1;
return -1;
}
#endif
if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
netdev->name, netdev))) {
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
- if (request_irq (*irqp, NULL, SA_SHIRQ, "bogus", dev) != EBUSY) {
+ if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
unsigned long irq_mask;
/* Twinkle the interrupt, and check if it's seen */
irq_mask = probe_irq_on();
sp->in_interrupt = 0;
/* .. we can safely take handler calls during init. */
- retval = request_irq(dev->irq, &speedo_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &speedo_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
return retval;
}
/* Soft reset the chip. */
outl(0x4001, ioaddr + GENCTL);
- if ((retval = request_irq(dev->irq, &epic_interrupt, SA_SHIRQ, dev->name, dev)))
+ if ((retval = request_irq(dev->irq, &epic_interrupt, IRQF_SHARED, dev->name, dev)))
return retval;
epic_init_ring(dev);
iowrite32(0x00000001, ioaddr + BCR); /* Reset */
- if (request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
for (i = 0; i < 3; i++)
np->msi_flags |= NV_MSI_X_ENABLED;
if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT && !intr_test) {
/* Request irq for rx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_err;
}
/* Request irq for tx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_free_rx;
}
/* Request irq for link and timer handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
} else {
/* Request irq for all interrupts */
if ((!intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
+ request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
(intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0)) {
+ request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
np->msi_flags |= NV_MSI_ENABLED;
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0)) {
+ if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
+ (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msi(np->pci_dev);
np->msi_flags &= ~NV_MSI_ENABLED;
}
}
if (ret != 0) {
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, SA_SHIRQ, dev->name, dev) != 0))
+ if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
+ (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0))
goto out_err;
}
struct fs_enet_private *fep = netdev_priv(dev);
(*fep->ops->pre_request_irq)(dev, irq);
- return request_irq(irq, irqf, SA_SHIRQ, name, dev);
+ return request_irq(irq, irqf, IRQF_SHARED, name, dev);
}
static void fs_free_irq(struct net_device *dev, int irq)
}
if ((retval = request_irq(dev->irq, >96100_interrupt,
- SA_SHIRQ, dev->name, dev))) {
+ IRQF_SHARED, dev->name, dev))) {
err("unable to get IRQ %d\n", dev->irq);
return retval;
}
u32 rx_int_var, tx_int_var;
u16 fifo_info;
- i = request_irq(dev->irq, &hamachi_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &hamachi_interrupt, IRQF_SHARED, dev->name, dev);
if (i)
return i;
outb(0, FCR(dev->base_addr)); /* disable FIFOs */
outb(0x0d, MCR(dev->base_addr));
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, ser12_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED | IRQF_SHARED,
"baycom_ser_fdx", dev)) {
release_region(dev->base_addr, SER12_EXTENT);
return -EBUSY;
outb(0, FCR(dev->base_addr)); /* disable FIFOs */
outb(0x0d, MCR(dev->base_addr));
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, ser12_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, ser12_interrupt, IRQF_DISABLED | IRQF_SHARED,
"baycom_ser12", dev)) {
release_region(dev->base_addr, SER12_EXTENT);
return -EBUSY;
if (!Ivec[hwcfg.irq].used && hwcfg.irq)
{
- if (request_irq(hwcfg.irq, scc_isr, SA_INTERRUPT, "AX.25 SCC", NULL))
+ if (request_irq(hwcfg.irq, scc_isr, IRQF_DISABLED, "AX.25 SCC", NULL))
printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
else
Ivec[hwcfg.irq].used = 1;
goto out_release_base;
}
outb(0, IER(dev->base_addr));
- if (request_irq(dev->irq, yam_interrupt, SA_INTERRUPT | SA_SHIRQ, dev->name, dev)) {
+ if (request_irq(dev->irq, yam_interrupt, IRQF_DISABLED | IRQF_SHARED, dev->name, dev)) {
printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
ret = -EBUSY;
goto out_release_base;
/* New: if bus is PCI or EISA, interrupts might be shared interrupts */
if (request_irq(dev->irq, hp100_interrupt,
lp->bus == HP100_BUS_PCI || lp->bus ==
- HP100_BUS_EISA ? SA_SHIRQ : SA_INTERRUPT,
+ HP100_BUS_EISA ? IRQF_SHARED : IRQF_DISABLED,
"hp100", dev)) {
printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq);
return -EAGAIN;
dev->irq = IRQ_AMIGA_PORTS;
/* Install the Interrupt handler */
- if (request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, "Hydra Ethernet",
+ if (request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, "Hydra Ethernet",
dev)) {
free_netdev(dev);
return -EAGAIN;
/* register resources - only necessary for IRQ */
- result = request_irq(priv->realirq, irq_handler, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (result != 0) {
printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq);
return result;
{
struct ioc3_private *ip = netdev_priv(dev);
- if (request_irq(dev->irq, ioc3_interrupt, SA_SHIRQ, ioc3_str, dev)) {
+ if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
return -EAGAIN;
return 0;
if (request_irq (self->io.irq, toshoboe_interrupt,
- SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
+ IRQF_SHARED | IRQF_DISABLED, dev->name, (void *) self))
{
return -EAGAIN;
}
self->io.fir_base = self->base;
self->io.fir_ext = OBOE_IO_EXTENT;
self->io.irq = pci_dev->irq;
- self->io.irqflags = SA_SHIRQ | SA_INTERRUPT;
+ self->io.irqflags = IRQF_SHARED | IRQF_DISABLED;
self->speed = self->io.speed = 9600;
self->async = 0;
outb(IRINTR_INT_MASK, ndev->base_addr+VLSI_PIO_IRINTR);
- if (request_irq(ndev->irq, vlsi_interrupt, SA_SHIRQ,
+ if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED,
drivername, ndev)) {
IRDA_WARNING("%s: couldn't get IRQ: %d\n",
__FUNCTION__, ndev->irq);
#endif
if((err = request_irq(adapter->pdev->irq, &ixgb_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
netdev->name, netdev))) {
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
if (!nds_open++) {
err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt,
- SA_SHIRQ, "ixp2000_eth", nds);
+ IRQF_SHARED, "ixp2000_eth", nds);
if (err) {
nds_open--;
return err;
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
-#define SONIC_IRQ_FLAG SA_INTERRUPT
+#define SONIC_IRQ_FLAG IRQF_DISABLED
#include "sonic.c"
{
int i;
- i = request_irq(dev->irq, &i596_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &i596_interrupt, IRQF_SHARED, dev->name, dev);
if (i) {
printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
return i;
pr_debug("%s: mipsnet_open\n", dev->name);
err = request_irq(dev->irq, &mipsnet_interrupt,
- SA_SHIRQ, dev->name, (void *) dev);
+ IRQF_SHARED, dev->name, (void *) dev);
if (err) {
pr_debug("%s: %s(): can't get irq %d\n",
int err;
err = request_irq(dev->irq, mv643xx_eth_int_handler,
- SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (err) {
printk(KERN_ERR "Can not assign IRQ number to MV643XX_eth%d\n",
port_num);
pci_enable_device(pdev);
pci_set_master(pdev);
- status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
netdev->name, mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to allocate IRQ\n");
mgp->msi_enabled = 1;
}
- status = request_irq(pdev->irq, myri10ge_intr, SA_SHIRQ,
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
netdev->name, mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to allocate IRQ\n");
/* Register interrupt handler now. */
DET(("Requesting MYRIcom IRQ line.\n"));
if (request_irq(dev->irq, &myri_interrupt,
- SA_SHIRQ, "MyriCOM Ethernet", (void *) dev)) {
+ IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
printk("MyriCOM: Cannot register interrupt handler.\n");
goto err;
}
/* Reset the chip, just in case. */
natsemi_reset(dev);
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i) return i;
if (netif_msg_ifup(np))
static int ne2k_pci_open(struct net_device *dev)
{
- int ret = request_irq(dev->irq, ei_interrupt, SA_SHIRQ, dev->name, dev);
+ int ret = request_irq(dev->irq, ei_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
struct netx_eth_priv *priv = netdev_priv(ndev);
if (request_irq
- (ndev->irq, &netx_eth_interrupt, SA_SHIRQ, ndev->name, ndev))
+ (ndev->irq, &netx_eth_interrupt, IRQF_SHARED, ndev->name, ndev))
return -EAGAIN;
writel(ndev->dev_addr[0] |
dev->IMR_cache = 0;
- err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
+ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED,
DRV_NAME, ndev);
if (err) {
printk(KERN_INFO "ns83820: unable to register irq %d\n",
DPRINTK ("ENTER\n");
- retval = request_irq (dev->irq, netdrv_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq (dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
DPRINTK ("EXIT, returning %d\n", retval);
return retval;
link->open++;
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, "axnet_cs", dev);
+ request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
info->link_status = 0x00;
init_timer(&info->watchdog);
link->open++;
set_misc_reg(dev);
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev);
+ request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
info->phy_id = info->eth_phy;
info->link_status = 0x00;
unsigned long flags;
if (request_irq(dev->irq, &pcnet32_interrupt,
- lp->shared_irq ? SA_SHIRQ : 0, dev->name,
+ lp->shared_irq ? IRQF_SHARED : 0, dev->name,
(void *)dev)) {
return -EAGAIN;
}
INIT_WORK(&phydev->phy_queue, phy_change, phydev);
if (request_irq(phydev->irq, phy_interrupt,
- SA_SHIRQ,
+ IRQF_SHARED,
"phy_interrupt",
phydev) < 0) {
printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
rtl8169_set_rxbufsize(tp, dev);
retval =
- request_irq(dev->irq, rtl8169_interrupt, SA_SHIRQ, dev->name, dev);
+ request_irq(dev->irq, rtl8169_interrupt, IRQF_SHARED, dev->name, dev);
if (retval < 0)
goto out;
readl(®s->HostCtrl);
spin_unlock_irqrestore(&rrpriv->lock, flags);
- if (request_irq(dev->irq, rr_interrupt, SA_SHIRQ, dev->name, dev)) {
+ if (request_irq(dev->irq, rr_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_WARNING "%s: Requested IRQ %d is busy\n",
dev->name, dev->irq);
ecode = -EAGAIN;
/* After proper initialization of H/W, register ISR */
if (sp->intr_type == MSI) {
err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
- SA_SHIRQ, sp->name, dev);
+ IRQF_SHARED, sp->name, dev);
if (err) {
DBG_PRINT(ERR_DBG, "%s: MSI registration \
failed\n", dev->name);
}
}
if (sp->intr_type == INTA) {
- err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
+ err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
sp->name, dev);
if (err) {
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
*/
__raw_readq(sc->sbm_isr);
- if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev))
return -EBUSY;
/*
sis190_request_timer(dev);
- rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev);
if (rc < 0)
goto err_release_timer_2;
/* Equalizer workaround Rule */
sis630_set_eq(net_dev, sis_priv->chipset_rev);
- ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ,
+ ret = request_irq(net_dev->irq, &sis900_interrupt, IRQF_SHARED,
net_dev->name, net_dev);
if (ret)
return ret;
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
if (pAC->GIni.GIMacsFound == 2) {
- Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
+ Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
} else if (pAC->GIni.GIMacsFound == 1) {
- Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
+ Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED,
"sk98lin", dev);
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
pci_enable_device(pdev);
pci_set_master(pdev);
if (pAC->GIni.GIMacsFound == 2)
- ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
+ ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
else
- ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev);
+ ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev);
if (ret) {
printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
pAC->AllocFlag &= ~SK_ALLOC_IRQ;
/* register resources - only necessary for IRQ */
result =
request_irq(priv->realirq, irq_handler,
- SA_SHIRQ | SA_SAMPLE_RANDOM, "sk_mca", dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, "sk_mca", dev);
if (result != 0) {
printk("%s: failed to register irq %d\n", dev->name,
dev->irq);
PRINTK(KERN_INFO "entering skfp_open\n");
/* Register IRQ - support shared interrupts by passing device ptr */
- err = request_irq(dev->irq, (void *) skfp_interrupt, SA_SHIRQ,
+ err = request_irq(dev->irq, (void *) skfp_interrupt, IRQF_SHARED,
dev->name, dev);
if (err)
return err;
goto err_out_free_hw;
}
- err = request_irq(pdev->irq, skge_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
goto err_out_unregister;
}
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
static int ultra32_open(struct net_device *dev)
{
int ioaddr = dev->base_addr - ULTRA32_NIC_OFFSET; /* ASIC addr */
- int irq_flags = (inb(ioaddr + ULTRA32_CFG5) & 0x08) ? 0 : SA_SHIRQ;
+ int irq_flags = (inb(ioaddr + ULTRA32_CFG5) & 0x08) ? 0 : IRQF_SHARED;
int retval;
retval = request_irq(dev->irq, ei_interrupt, irq_flags, dev->name, dev);
lp->ctl_rspeed = 100;
/* Grab the IRQ */
- retval = request_irq(dev->irq, &smc911x_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &smc911x_interrupt, IRQF_SHARED, dev->name, dev);
if (retval)
goto err_out;
machine_is_omap_h2() \
|| machine_is_omap_h3() \
|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING)
+ ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
#elif defined(CONFIG_SH_SH4202_MICRODEV)
#endif
#ifndef SMC_IRQ_FLAGS
-#define SMC_IRQ_FLAGS SA_TRIGGER_RISING
+#define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING
#endif
#ifndef SMC_INTERRUPT_PREAMBLE
result = -EBUSY;
if (request_irq(netdev->irq, spider_net_interrupt,
- SA_SHIRQ, netdev->name, netdev))
+ IRQF_SHARED, netdev->name, netdev))
goto register_int_failed;
spider_net_enable_card(card);
/* Do we ever need to reset the chip??? */
- retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;
REGA(CSR0) = CSR0_STOP;
- request_irq(LANCE_IRQ, lance_interrupt, SA_INTERRUPT, "SUN3 Lance", dev);
+ request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev);
dev->irq = (unsigned short)LANCE_IRQ;
struct bigmac *bp = (struct bigmac *) dev->priv;
int ret;
- ret = request_irq(dev->irq, &bigmac_interrupt, SA_SHIRQ, dev->name, bp);
+ ret = request_irq(dev->irq, &bigmac_interrupt, IRQF_SHARED, dev->name, bp);
if (ret) {
printk(KERN_ERR "BIGMAC: Can't order irq %d to go.\n", dev->irq);
return ret;
/* Do we need to reset the chip??? */
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
return i;
spin_unlock_irqrestore(&gp->lock, flags);
if (request_irq(gp->pdev->irq, gem_interrupt,
- SA_SHIRQ, dev->name, (void *)dev)) {
+ IRQF_SHARED, dev->name, (void *)dev)) {
printk(KERN_ERR "%s: failed to request irq !\n", gp->dev->name);
spin_lock_irqsave(&gp->lock, flags);
*/
if ((hp->happy_flags & (HFLAG_QUATTRO|HFLAG_PCI)) != HFLAG_QUATTRO) {
if (request_irq(dev->irq, &happy_meal_interrupt,
- SA_SHIRQ, dev->name, (void *)dev)) {
+ IRQF_SHARED, dev->name, (void *)dev)) {
HMD(("EAGAIN\n"));
printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n",
dev->irq);
err = request_irq(sdev->irqs[0],
quattro_sbus_interrupt,
- SA_SHIRQ, "Quattro",
+ IRQF_SHARED, "Quattro",
qp);
if (err != 0) {
printk(KERN_ERR "Quattro: Fatal IRQ registery error %d.\n", err);
STOP_LANCE(lp);
- if (request_irq(dev->irq, &lance_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, &lance_interrupt, IRQF_SHARED,
lancestr, (void *) dev)) {
printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
return -EAGAIN;
qec_init_once(qecp, qec_sdev);
if (request_irq(qec_sdev->irqs[0], &qec_interrupt,
- SA_SHIRQ, "qec", (void *) qecp)) {
+ IRQF_SHARED, "qec", (void *) qecp)) {
printk(KERN_ERR "qec: Can't register irq.\n");
goto fail;
}
*/
if (dev->irq == 0 ||
- request_irq(dev->irq, &tc35815_interrupt, SA_SHIRQ, cardname, dev)) {
+ request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, cardname, dev)) {
return -EAGAIN;
}
fn = tg3_msi;
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
fn = tg3_msi_1shot;
- flags = SA_SAMPLE_RANDOM;
+ flags = IRQF_SAMPLE_RANDOM;
} else {
fn = tg3_interrupt;
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
fn = tg3_interrupt_tagged;
- flags = SA_SHIRQ | SA_SAMPLE_RANDOM;
+ flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
}
return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
}
free_irq(tp->pdev->irq, dev);
err = request_irq(tp->pdev->irq, tg3_test_isr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
if (err)
return err;
int err;
priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
- err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
+ err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED, TLanSignature, dev );
if ( err ) {
printk(KERN_ERR "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
u16 switchsettings, switchsettings_eeprom ;
- if(request_irq(dev->irq, &xl_interrupt, SA_SHIRQ , "3c359", dev)) {
+ if(request_irq(dev->irq, &xl_interrupt, IRQF_SHARED , "3c359", dev)) {
return -EAGAIN;
}
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, SA_SHIRQ,
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret)
goto err_out_region;
rc=streamer_reset(dev);
}
- if (request_irq(dev->irq, &streamer_interrupt, SA_SHIRQ, "lanstreamer", dev)) {
+ if (request_irq(dev->irq, &streamer_interrupt, IRQF_SHARED, "lanstreamer", dev)) {
return -EAGAIN;
}
#if STREAMER_DEBUG
*/
outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
madgemc_setsifsel(dev, 1);
- if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, madgemc_interrupt, IRQF_SHARED,
"madgemc", dev)) {
ret = -EBUSY;
goto getout3;
olympic_init(dev);
- if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) {
+ if(request_irq(dev->irq, &olympic_interrupt, IRQF_SHARED , "olympic", dev)) {
return -EAGAIN;
}
dev->irq = 15;
break;
}
- if (request_irq(dev->irq, smctr_interrupt, SA_SHIRQ, smctr_name, dev)) {
+ if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev)) {
release_region(dev->base_addr, SMCTR_IO_EXTENT);
return -ENODEV;
}
goto out2;
}
- if (request_irq(dev->irq, smctr_interrupt, SA_SHIRQ, smctr_name, dev))
+ if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev))
goto out2;
/* Get 58x Rom Base */
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, SA_SHIRQ,
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
dev->name, dev);
if (ret)
goto err_out_region;
dw32(IntrMask, 0);
- rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
dev->name, dev->irq, rc);
0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
only <niles@axp745gsfc.nasa.gov>
Fix for multiple PCI cards reported by <jos@xos.nl>
- Duh, put the SA_SHIRQ flag into request_interrupt().
+ Duh, put the IRQF_SHARED flag into request_interrupt().
Fix SMC ethernet address in enet_det[].
Print chip name instead of "UNKNOWN" during boot.
0.42 26-Apr-96 Fix MII write TA bit error.
infoblocks.
Added DC21142 and DC21143 functions.
Added byte counters from <phil@tazenda.demon.co.uk>
- Added SA_INTERRUPT temporary fix from
+ Added IRQF_DISABLED temporary fix from
<mjacob@feral.com>.
0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
module load: bug reported by
lp->state = OPEN;
de4x5_dbg_open(dev);
- if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ,
+ if (request_irq(dev->irq, (void *)de4x5_interrupt, IRQF_SHARED,
lp->adapter_name, dev)) {
printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
- if (request_irq(dev->irq, de4x5_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
lp->adapter_name, dev)) {
printk("\n Cannot get IRQ- reconfigure your hardware.\n");
disable_ast(dev);
DMFE_DBUG(0, "dmfe_open", 0);
- ret = request_irq(dev->irq, &dmfe_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, &dmfe_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
{
int retval;
- if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev)))
+ if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev)))
return retval;
tulip_init_ring (dev);
pci_enable_device(pdev);
- if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
printk (KERN_ERR "tulip: request_irq failed in resume\n");
return retval;
}
ULI526X_DBUG(0, "uli526x_open", 0);
- ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */
netif_device_detach(dev);
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
goto out_err;
int retval;
enter("xircom_open");
printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
- retval = request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev);
+ retval = request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
leave("xircom_open - No IRQ");
return retval;
{
struct xircom_private *tp = netdev_priv(dev);
- if (request_irq(dev->irq, &xircom_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev))
return -EAGAIN;
xircom_up(dev);
goto out_sleep;
}
- err = request_irq(dev->irq, &typhoon_interrupt, SA_SHIRQ,
+ err = request_irq(dev->irq, &typhoon_interrupt, IRQF_SHARED,
dev->name, dev);
if(err < 0)
goto out_sleep;
void __iomem *ioaddr = rp->base;
int rc;
- rc = request_irq(rp->pdev->irq, &rhine_interrupt, SA_SHIRQ, dev->name,
+ rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
dev);
if (rc)
return rc;
if (!netif_running(dev))
return 0;
- if (request_irq(dev->irq, rhine_interrupt, SA_SHIRQ, dev->name, dev))
+ if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
ret = pci_set_power_state(pdev, PCI_D0);
velocity_init_registers(vptr, VELOCITY_INIT_COLD);
- ret = request_irq(vptr->pdev->irq, &velocity_intr, SA_SHIRQ,
+ ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
dev->name, dev);
if (ret < 0) {
/* Power down the chip */
priv = pci_get_drvdata(pdev);
- rc = request_irq(pdev->irq, dscc4_irq, SA_SHIRQ, DRV_NAME, priv->root);
+ rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
if (rc < 0) {
printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
goto err_release_4;
dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
/* Register the interrupt handler */
- if (request_irq(pdev->irq, fst_intr, SA_SHIRQ, FST_DEV_NAME, card)) {
+ if (request_irq(pdev->irq, fst_intr, IRQF_SHARED, FST_DEV_NAME, card)) {
printk_err("Unable to register interrupt %d\n", card->irq);
pci_release_regions(pdev);
pci_disable_device(pdev);
/* We want a fast IRQ for this device. Actually we'd like an even faster
IRQ ;) - This is one driver RtLinux is made for */
- if(request_irq(irq, &z8530_interrupt, SA_INTERRUPT, "Hostess SV11", dev)<0)
+ if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0)
{
printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
goto fail1;
lmc_softreset (sc);
/* Since we have to use PCI bus, this should work on x86,alpha,ppc */
- if (request_irq (dev->irq, &lmc_interrupt, SA_SHIRQ, dev->name, dev)){
+ if (request_irq (dev->irq, &lmc_interrupt, IRQF_SHARED, dev->name, dev)){
printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
lmc_trace(dev, "lmc_open irq failed out");
return -EAGAIN;
}
/* Allocate IRQ */
- if (request_irq(card->hw.irq, cpc_intr, SA_SHIRQ, "Cyclades-PC300", card)) {
+ if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) {
printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n",
card->hw.ramphys, card->hw.irq);
goto err_io_unmap;
writew(readw(p) | 0x0040, p);
/* Allocate IRQ */
- if (request_irq(pdev->irq, sca_intr, SA_SHIRQ, devname, card)) {
+ if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
pdev->irq);
pci200_pci_remove_one(pdev);
}
}
- if( request_irq(dev->irq, sbni_interrupt, SA_SHIRQ, dev->name, dev) ) {
+ if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
printk( KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, dev->irq );
return -EAGAIN;
/* We want a fast IRQ for this device. Actually we'd like an even faster
IRQ ;) - This is one driver RtLinux is made for */
- if(request_irq(irq, &z8530_interrupt, SA_INTERRUPT, "SeaLevel", dev)<0)
+ if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
{
printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
goto fail1_1;
pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
/* Allocate IRQ */
- if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) {
+ if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
pci_name(pdev), pdev->irq);
wanxl_pci_remove_one(pdev);
reset_card (dev, 1);
msleep(400);
- rc = request_irq( dev->irq, airo_interrupt, SA_SHIRQ, dev->name, dev );
+ rc = request_irq( dev->irq, airo_interrupt, IRQF_SHARED, dev->name, dev );
if (rc) {
airo_print_err(dev->name, "register interrupt %d failed, rc %d",
irq, rc);
SET_NETDEV_DEV(dev, sys_dev);
- if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) {
+ if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc);
goto err_out_free;
}
}
#endif
res = request_irq(bcm->irq, bcm43xx_interrupt_handler,
- SA_SHIRQ, KBUILD_MODNAME, bcm);
+ IRQF_SHARED, KBUILD_MODNAME, bcm);
if (res) {
printk(KERN_ERR PFX "Cannot register IRQ%d\n", bcm->irq);
return -ENODEV;
pci_set_drvdata(pdev, dev);
- if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name,
+ if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
dev)) {
printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
goto fail;
pci_set_drvdata(pdev, dev);
- if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name,
+ if (request_irq(dev->irq, prism2_interrupt, IRQF_SHARED, dev->name,
dev)) {
printk(KERN_WARNING "%s: request_irq failed\n", dev->name);
goto fail;
ipw2100_queues_initialize(priv);
err = request_irq(pci_dev->irq,
- ipw2100_interrupt, SA_SHIRQ, dev->name, priv);
+ ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
if (err) {
printk(KERN_WARNING DRV_NAME
"Error calling request_irq: %d.\n", pci_dev->irq);
ipw_sw_reset(priv, 1);
- err = request_irq(pdev->irq, ipw_isr, SA_SHIRQ, DRV_NAME, priv);
+ err = request_irq(pdev->irq, ipw_isr, IRQF_SHARED, DRV_NAME, priv);
if (err) {
IPW_ERROR("Error allocating IRQ %d\n", pdev->irq);
goto out_destroy_workqueue;
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
pci_enable_device(pdev);
pci_restore_state(pdev);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
dev->name, dev);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
/* request for the interrupt before uploading the firmware */
rvalue = request_irq(pdev->irq, &islpci_interrupt,
- SA_SHIRQ, ndev->name, priv);
+ IRQF_SHARED, ndev->name, priv);
if (rvalue) {
/* error, could not hook the handler to the irq */
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
if (i) return i;
if (yellowfin_debug > 1)
dev->irq = IRQ_AMIGA_PORTS;
/* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, DRV_NAME, dev);
+ i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
int irq, irq2; /* Interrupts used */
int dma, dma2; /* DMA channel(s) used */
int fifo_size; /* FIFO size */
- int irqflags; /* interrupt flags (ie, SA_SHIRQ|SA_INTERRUPT) */
+ int irqflags; /* interrupt flags (ie, IRQF_SHARED|IRQF_DISABLED) */
int direction; /* Link direction, used by some FIR drivers */
int enabled; /* Powered on? */
int suspended; /* Suspended by APM */
projects / linux-2.6 / commitdiff