if (!cd_media_cd_rom)
cd_media_state = media_status[header[2] & 3];
+ /* DVD+RW discs once formatted are always "complete", DVD-RAM are
+ * "other" or "complete" if the disc is write protected; we need to
+ * check the contents if it is blank */
+ if ((cd_media_dvd_plus_rw || cd_media_dvd_plus_rw_dl || cd_media_dvd_ram) && (header[2] & 3) > 1) {
+ unsigned char buffer[17 * 2048];
+ unsigned char result, len;
+ int block, offset;
+
+ if (cd_media_dvd_ram) {
+ /* a write protected dvd-ram may report "complete" status */
+
+ unsigned char dvdstruct[8];
+ unsigned char format[12];
+
+ scsi_cmd_init(udev, &sc, dvdstruct, sizeof(dvdstruct));
+ scsi_cmd_set(udev, &sc, 0, 0xAD);
+ scsi_cmd_set(udev, &sc, 7, 0xC0);
+ scsi_cmd_set(udev, &sc, 9, sizeof(dvdstruct));
+ scsi_cmd_set(udev, &sc, 11, 0);
+ err = scsi_cmd_run(udev, &sc, fd, dvdstruct, sizeof(dvdstruct));
+ if ((err != 0)) {
+ info_scsi_cmd_err(udev, "READ DVD STRUCTURE", err);
+ return -1;
+ }
+ if (dvdstruct[4] & 0x02) {
+ cd_media_state = media_status[2];
+ info(udev, "write-protected DVD-RAM media inserted\n");
+ goto determined;
+ }
+
+ /* let's make sure we don't try to read unformatted media */
+ scsi_cmd_init(udev, &sc, format, sizeof(format));
+ scsi_cmd_set(udev, &sc, 0, 0x23);
+ scsi_cmd_set(udev, &sc, 8, sizeof(format));
+ scsi_cmd_set(udev, &sc, 9, 0);
+ err = scsi_cmd_run(udev, &sc, fd, format, sizeof(format));
+ if ((err != 0)) {
+ info_scsi_cmd_err(udev, "READ DVD FORMAT CAPACITIES", err);
+ return -1;
+ }
+
+ len = format[3];
+ if (len & 7 || len < 16) {
+ info(udev, "invalid format capacities length\n");
+ return -1;
+ }
+
+ switch(format[8] & 3) {
+ case 1:
+ info(udev, "unformatted DVD-RAM media inserted\n");
+ /* This means that last format was interrupted
+ * or failed, blank dvd-ram discs are factory
+ * formatted. Take no action here as it takes
+ * quite a while to reformat a dvd-ram and it's
+ * not automatically started */
+ goto determined;
+
+ case 2:
+ info(udev, "formatted DVD-RAM media inserted\n");
+ break;
+
+ case 3:
+ cd_media = 0; //return no media
+ info(udev, "format capacities returned no media\n");
+ return -1;
+ }
+ }
+
+ /* Take a closer look at formatted media (unformatted DVD+RW
+ * has "blank" status", DVD-RAM was examined earlier) and check
+ * for ISO and UDF PVDs or a fs superblock presence and do it
+ * in one ioctl (we need just sectors 0 and 16) */
+ scsi_cmd_init(udev, &sc, buffer, sizeof(buffer));
+ scsi_cmd_set(udev, &sc, 0, 0x28);
+ scsi_cmd_set(udev, &sc, 5, 0);
+ scsi_cmd_set(udev, &sc, 8, 17);
+ scsi_cmd_set(udev, &sc, 9, 0);
+ err = scsi_cmd_run(udev, &sc, fd, buffer, sizeof(buffer));
+ if ((err != 0)) {
+ info_scsi_cmd_err(udev, "READ FIRST 32 BLOCKS", err);
+ return -1;
+ }
+
+ /* if any non-zero data is found in sector 16 (iso and udf) or
+ * eventually 0 (fat32 boot sector, ext2 superblock, etc), disc
+ * is assumed non-blank */
+ result = 0;
+
+ for (block = 32768; block >= 0 && !result; block -= 32768) {
+ offset = block;
+ while (offset < (block + 2048) && !result) {
+ result = buffer [offset];
+ offset++;
+ }
+ }
+
+ if (!result) {
+ cd_media_state = media_status[0];
+ info(udev, "no data in blocks 0 or 16, assuming blank\n");
+ } else {
+ info(udev, "data in blocks 0 or 16, assuming complete\n");
+ }
+ }
+
+determined:
if ((header[2] & 3) != 2)
cd_media_session_next = header[10] << 8 | header[5];
cd_media_session_count = header[9] << 8 | header[4];