+++ /dev/null
-/*
- * Copyright 2002 Andi Kleen, SuSE Labs.
- * FXSAVE<->i387 conversion support. Based on code by Gareth Hughes.
- * This is used for ptrace, signals and coredumps in 32bit emulation.
- */
-
-#include <linux/sched.h>
-#include <asm/sigcontext32.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-
-static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
-{
- unsigned int tmp; /* to avoid 16 bit prefixes in the code */
-
- /* Transform each pair of bits into 01 (valid) or 00 (empty) */
- tmp = ~twd;
- tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
- /* and move the valid bits to the lower byte. */
- tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
- tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
- tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
- return tmp;
-}
-
-#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16);
-#define FP_EXP_TAG_VALID 0
-#define FP_EXP_TAG_ZERO 1
-#define FP_EXP_TAG_SPECIAL 2
-#define FP_EXP_TAG_EMPTY 3
-
-static inline unsigned long twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
-{
- struct _fpxreg *st;
- unsigned long tos = (fxsave->swd >> 11) & 7;
- unsigned long twd = (unsigned long) fxsave->twd;
- unsigned long tag;
- unsigned long ret = 0xffff0000;
- int i;
-
- for (i = 0; i < 8; i++, twd >>= 1) {
- if (twd & 0x1) {
- st = FPREG_ADDR(fxsave, (i - tos) & 7);
-
- switch (st->exponent & 0x7fff) {
- case 0x7fff:
- tag = FP_EXP_TAG_SPECIAL;
- break;
- case 0x0000:
- if (!st->significand[0] &&
- !st->significand[1] &&
- !st->significand[2] &&
- !st->significand[3])
- tag = FP_EXP_TAG_ZERO;
- else
- tag = FP_EXP_TAG_SPECIAL;
- break;
- default:
- if (st->significand[3] & 0x8000)
- tag = FP_EXP_TAG_VALID;
- else
- tag = FP_EXP_TAG_SPECIAL;
- break;
- }
- } else {
- tag = FP_EXP_TAG_EMPTY;
- }
- ret |= tag << (2 * i);
- }
- return ret;
-}
-
-#define G(num, val) err |= __get_user(val, num + (u32 __user *)buf)
-
-static inline int convert_fxsr_from_user(struct i387_fxsave_struct *fxsave,
- struct _fpstate_ia32 __user *buf)
-{
- struct _fpxreg *to;
- struct _fpreg __user *from;
- int i, err = 0;
- u32 v;
-
- G(0, fxsave->cwd);
- G(1, fxsave->swd);
- G(2, fxsave->twd);
- fxsave->twd = twd_i387_to_fxsr(fxsave->twd);
- G(3, fxsave->rip);
- G(4, v);
- /* cs ignored */
- fxsave->fop = v>>16;
- G(5, fxsave->rdp);
- /* 6: ds ignored */
- if (err)
- return -1;
-
- to = (struct _fpxreg *)&fxsave->st_space[0];
- from = &buf->_st[0];
- for (i = 0; i < 8; i++, to++, from++) {
- if (__copy_from_user(to, from, sizeof(*from)))
- return -1;
- }
- return 0;
-}
-
-#define P(num, val) err |= __put_user(val, num + (u32 __user *)buf)
-
-static inline int convert_fxsr_to_user(struct _fpstate_ia32 __user *buf,
- struct i387_fxsave_struct *fxsave,
- struct pt_regs *regs,
- struct task_struct *tsk)
-{
- struct _fpreg __user *to;
- struct _fpxreg *from;
- int i, err = 0;
- u16 cs, ds;
-
- if (tsk == current) {
- /*
- * should be actually ds/cs at fpu exception time, but
- * that information is not available in 64bit mode.
- */
- asm("movw %%ds,%0 " : "=r" (ds));
- asm("movw %%cs,%0 " : "=r" (cs));
- } else {
- /* ptrace. task has stopped. */
- ds = tsk->thread.ds;
- cs = regs->cs;
- }
-
- P(0, (u32)fxsave->cwd | 0xffff0000);
- P(1, (u32)fxsave->swd | 0xffff0000);
- P(2, twd_fxsr_to_i387(fxsave));
- P(3, (u32)fxsave->rip);
- P(4, cs | ((u32)fxsave->fop) << 16);
- P(5, fxsave->rdp);
- P(6, 0xffff0000 | ds);
-
- if (err)
- return -1;
-
- to = &buf->_st[0];
- from = (struct _fpxreg *) &fxsave->st_space[0];
- for (i = 0; i < 8; i++, to++, from++) {
- if (__copy_to_user(to, from, sizeof(*to)))
- return -1;
- }
- return 0;
-}
-
-int restore_i387_ia32(struct task_struct *tsk,
- struct _fpstate_ia32 __user *buf, int fsave)
-{
- clear_fpu(tsk);
- if (!fsave) {
- if (__copy_from_user(&tsk->thread.i387.fxsave,
- &buf->_fxsr_env[0],
- sizeof(struct i387_fxsave_struct)))
- return -1;
- tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
- set_stopped_child_used_math(tsk);
- }
- return convert_fxsr_from_user(&tsk->thread.i387.fxsave, buf);
-}
-
-int save_i387_ia32(struct task_struct *tsk, struct _fpstate_ia32 __user *buf,
- struct pt_regs *regs, int fsave)
-{
- int err = 0;
-
- init_fpu(tsk);
- if (convert_fxsr_to_user(buf, &tsk->thread.i387.fxsave, regs, tsk))
- return -1;
- if (fsave)
- return 0;
- err |= __put_user(tsk->thread.i387.fxsave.swd, &buf->status);
- err |= __put_user(X86_FXSR_MAGIC, &buf->magic);
- err |= __copy_to_user(&buf->_fxsr_env[0], &tsk->thread.i387.fxsave,
- sizeof(struct i387_fxsave_struct));
- return err ? -1 : 1;
-}
+++ /dev/null
-/*
- * Copyright (C) 1994 Linus Torvalds
- * Copyright (C) 2002 Andi Kleen, SuSE Labs
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * x86-64 rework 2002 Andi Kleen.
- * Does direct fxsave in and out of user space now for signal handlers.
- * All the FSAVE<->FXSAVE conversion code has been moved to the 32bit emulation,
- * the 64bit user space sees a FXSAVE frame directly.
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-
-unsigned int mxcsr_feature_mask __read_mostly = 0xffffffff;
-
-void mxcsr_feature_mask_init(void)
-{
- unsigned int mask;
- clts();
- memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
- asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave));
- mask = current->thread.i387.fxsave.mxcsr_mask;
- if (mask == 0) mask = 0x0000ffbf;
- mxcsr_feature_mask &= mask;
- stts();
-}
-
-/*
- * Called at bootup to set up the initial FPU state that is later cloned
- * into all processes.
- */
-void __cpuinit fpu_init(void)
-{
- unsigned long oldcr0 = read_cr0();
- extern void __bad_fxsave_alignment(void);
-
- if (offsetof(struct task_struct, thread.i387.fxsave) & 15)
- __bad_fxsave_alignment();
- set_in_cr4(X86_CR4_OSFXSR);
- set_in_cr4(X86_CR4_OSXMMEXCPT);
-
- write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */
-
- mxcsr_feature_mask_init();
- /* clean state in init */
- current_thread_info()->status = 0;
- clear_used_math();
-}
-
-void init_fpu(struct task_struct *child)
-{
- if (tsk_used_math(child)) {
- if (child == current)
- unlazy_fpu(child);
- return;
- }
- memset(&child->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
- child->thread.i387.fxsave.cwd = 0x37f;
- child->thread.i387.fxsave.mxcsr = 0x1f80;
- /* only the device not available exception or ptrace can call init_fpu */
- set_stopped_child_used_math(child);
-}
-
-/*
- * ptrace request handlers.
- */
-
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *tsk)
-{
- init_fpu(tsk);
- return __copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct user_i387_struct)) ? -EFAULT : 0;
-}
-
-int set_fpregs(struct task_struct *tsk, struct user_i387_struct __user *buf)
-{
- if (__copy_from_user(&tsk->thread.i387.fxsave, buf,
- sizeof(struct user_i387_struct)))
- return -EFAULT;
- return 0;
-}
-
-/*
- * FPU state for core dumps.
- */
-
-int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu )
-{
- struct task_struct *tsk = current;
-
- if (!used_math())
- return 0;
-
- unlazy_fpu(tsk);
- memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct));
- return 1;
-}
-
-int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu)
-{
- int fpvalid = !!tsk_used_math(tsk);
-
- if (fpvalid) {
- if (tsk == current)
- unlazy_fpu(tsk);
- memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct));
-}
- return fpvalid;
-}
-#include "i387_64.h"
+/*
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ * x86-64 work by Andi Kleen 2002
+ */
+
+#ifndef _ASM_X86_I387_H
+#define _ASM_X86_I387_H
+
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/regset.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/uaccess.h>
+
+extern void fpu_init(void);
+extern unsigned int mxcsr_feature_mask;
+extern void mxcsr_feature_mask_init(void);
+extern void init_fpu(struct task_struct *child);
+extern asmlinkage void math_state_restore(void);
+
+extern user_regset_active_fn fpregs_active, xfpregs_active;
+extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
+extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+
+#ifdef CONFIG_IA32_EMULATION
+struct _fpstate_ia32;
+extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
+extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
+#endif
+
+#ifdef CONFIG_X86_64
+
+/* Ignore delayed exceptions from user space */
+static inline void tolerant_fwait(void)
+{
+ asm volatile("1: fwait\n"
+ "2:\n"
+ " .section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,2b\n"
+ " .previous\n");
+}
+
+static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
+{
+ int err;
+
+ asm volatile("1: rex64/fxrstor (%[fx])\n\t"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,3b\n"
+ ".previous"
+ : [err] "=r" (err)
+#if 0 /* See comment in __save_init_fpu() below. */
+ : [fx] "r" (fx), "m" (*fx), "0" (0));
+#else
+ : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
+#endif
+ if (unlikely(err))
+ init_fpu(current);
+ return err;
+}
+
+#define X87_FSW_ES (1 << 7) /* Exception Summary */
+
+/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. The kernel data segment can be sometimes 0 and sometimes
+ new user value. Both should be ok.
+ Use the PDA as safe address because it should be already in L1. */
+static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
+{
+ if (unlikely(fx->swd & X87_FSW_ES))
+ asm volatile("fnclex");
+ alternative_input(ASM_NOP8 ASM_NOP2,
+ " emms\n" /* clear stack tags */
+ " fildl %%gs:0", /* load to clear state */
+ X86_FEATURE_FXSAVE_LEAK);
+}
+
+static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
+{
+ int err;
+
+ asm volatile("1: rex64/fxsave (%[fx])\n\t"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,3b\n"
+ ".previous"
+ : [err] "=r" (err), "=m" (*fx)
+#if 0 /* See comment in __fxsave_clear() below. */
+ : [fx] "r" (fx), "0" (0));
+#else
+ : [fx] "cdaSDb" (fx), "0" (0));
+#endif
+ if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+ err = -EFAULT;
+ /* No need to clear here because the caller clears USED_MATH */
+ return err;
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+ /* Using "rex64; fxsave %0" is broken because, if the memory operand
+ uses any extended registers for addressing, a second REX prefix
+ will be generated (to the assembler, rex64 followed by semicolon
+ is a separate instruction), and hence the 64-bitness is lost. */
+#if 0
+ /* Using "fxsaveq %0" would be the ideal choice, but is only supported
+ starting with gas 2.16. */
+ __asm__ __volatile__("fxsaveq %0"
+ : "=m" (tsk->thread.i387.fxsave));
+#elif 0
+ /* Using, as a workaround, the properly prefixed form below isn't
+ accepted by any binutils version so far released, complaining that
+ the same type of prefix is used twice if an extended register is
+ needed for addressing (fix submitted to mainline 2005-11-21). */
+ __asm__ __volatile__("rex64/fxsave %0"
+ : "=m" (tsk->thread.i387.fxsave));
+#else
+ /* This, however, we can work around by forcing the compiler to select
+ an addressing mode that doesn't require extended registers. */
+ __asm__ __volatile__("rex64/fxsave %P2(%1)"
+ : "=m" (tsk->thread.i387.fxsave)
+ : "cdaSDb" (tsk),
+ "i" (offsetof(__typeof__(*tsk),
+ thread.i387.fxsave)));
+#endif
+ clear_fpu_state(&tsk->thread.i387.fxsave);
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+ struct task_struct *tsk = current;
+ int err = 0;
+
+ BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+ sizeof(tsk->thread.i387.fxsave));
+
+ if ((unsigned long)buf % 16)
+ printk("save_i387: bad fpstate %p\n", buf);
+
+ if (!used_math())
+ return 0;
+ clear_used_math(); /* trigger finit */
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
+ if (err) return err;
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ stts();
+ } else {
+ if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
+ sizeof(struct i387_fxsave_struct)))
+ return -1;
+ }
+ return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+ set_used_math();
+ if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+ clts();
+ task_thread_info(current)->status |= TS_USEDFPU;
+ }
+ return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+#else /* CONFIG_X86_32 */
+
+static inline void tolerant_fwait(void)
+{
+ asm volatile("fnclex ; fwait");
+}
+
+static inline void restore_fpu(struct task_struct *tsk)
+{
+ /*
+ * The "nop" is needed to make the instructions the same
+ * length.
+ */
+ alternative_input(
+ "nop ; frstor %1",
+ "fxrstor %1",
+ X86_FEATURE_FXSR,
+ "m" ((tsk)->thread.i387.fxsave));
+}
+
+/* We need a safe address that is cheap to find and that is already
+ in L1 during context switch. The best choices are unfortunately
+ different for UP and SMP */
+#ifdef CONFIG_SMP
+#define safe_address (__per_cpu_offset[0])
+#else
+#define safe_address (kstat_cpu(0).cpustat.user)
+#endif
+
+/*
+ * These must be called with preempt disabled
+ */
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+ /* Use more nops than strictly needed in case the compiler
+ varies code */
+ alternative_input(
+ "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
+ "fxsave %[fx]\n"
+ "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
+ X86_FEATURE_FXSR,
+ [fx] "m" (tsk->thread.i387.fxsave),
+ [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. safe_address is a random variable that should be in L1 */
+ alternative_input(
+ GENERIC_NOP8 GENERIC_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (safe_address));
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387(struct _fpstate __user *buf);
+extern int restore_i387(struct _fpstate __user *buf);
+
+#endif /* CONFIG_X86_64 */
+
+static inline void __unlazy_fpu(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ __save_init_fpu(tsk);
+ stts();
+ } else
+ tsk->fpu_counter = 0;
+}
+
+static inline void __clear_fpu(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ tolerant_fwait();
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ stts();
+ }
+}
+
+static inline void kernel_fpu_begin(void)
+{
+ struct thread_info *me = current_thread_info();
+ preempt_disable();
+ if (me->status & TS_USEDFPU)
+ __save_init_fpu(me->task);
+ else
+ clts();
+}
+
+static inline void kernel_fpu_end(void)
+{
+ stts();
+ preempt_enable();
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+ __save_init_fpu(tsk);
+ stts();
+}
+
+#define unlazy_fpu __unlazy_fpu
+#define clear_fpu __clear_fpu
+
+#else /* CONFIG_X86_32 */
+
+/*
+ * These disable preemption on their own and are safe
+ */
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __save_init_fpu(tsk);
+ stts();
+ preempt_enable();
+}
+
+static inline void unlazy_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __unlazy_fpu(tsk);
+ preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __clear_fpu(tsk);
+ preempt_enable();
+}
+
+#endif /* CONFIG_X86_64 */
+
+/*
+ * ptrace request handlers...
+ */
+extern int get_fpregs(struct user_i387_struct __user *buf,
+ struct task_struct *tsk);
+extern int set_fpregs(struct task_struct *tsk,
+ struct user_i387_struct __user *buf);
+
+struct user_fxsr_struct;
+extern int get_fpxregs(struct user_fxsr_struct __user *buf,
+ struct task_struct *tsk);
+extern int set_fpxregs(struct task_struct *tsk,
+ struct user_fxsr_struct __user *buf);
+
+/*
+ * i387 state interaction
+ */
+static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
+{
+ if (cpu_has_fxsr) {
+ return tsk->thread.i387.fxsave.cwd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.cwd;
+ }
+}
+
+static inline unsigned short get_fpu_swd(struct task_struct *tsk)
+{
+ if (cpu_has_fxsr) {
+ return tsk->thread.i387.fxsave.swd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.swd;
+ }
+}
+
+static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
+{
+ if (cpu_has_xmm) {
+ return tsk->thread.i387.fxsave.mxcsr;
+ } else {
+ return MXCSR_DEFAULT;
+ }
+}
+
+#endif /* _ASM_X86_I387_H */
+++ /dev/null
-/*
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-#ifndef __ASM_I386_I387_H
-#define __ASM_I386_I387_H
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-
-extern void mxcsr_feature_mask_init(void);
-extern void init_fpu(struct task_struct *);
-
-/*
- * FPU lazy state save handling...
- */
-
-/*
- * The "nop" is needed to make the instructions the same
- * length.
- */
-#define restore_fpu(tsk) \
- alternative_input( \
- "nop ; frstor %1", \
- "fxrstor %1", \
- X86_FEATURE_FXSR, \
- "m" ((tsk)->thread.i387.fxsave))
-
-extern void kernel_fpu_begin(void);
-#define kernel_fpu_end() do { stts(); preempt_enable(); } while(0)
-
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
-/*
- * These must be called with preempt disabled
- */
-static inline void __save_init_fpu( struct task_struct *tsk )
-{
- /* Use more nops than strictly needed in case the compiler
- varies code */
- alternative_input(
- "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
- "fxsave %[fx]\n"
- "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
- X86_FEATURE_FXSR,
- [fx] "m" (tsk->thread.i387.fxsave),
- [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- GENERIC_NOP8 GENERIC_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-#define __unlazy_fpu( tsk ) do { \
- if (task_thread_info(tsk)->status & TS_USEDFPU) { \
- __save_init_fpu(tsk); \
- stts(); \
- } else \
- tsk->fpu_counter = 0; \
-} while (0)
-
-#define __clear_fpu( tsk ) \
-do { \
- if (task_thread_info(tsk)->status & TS_USEDFPU) { \
- asm volatile("fnclex ; fwait"); \
- task_thread_info(tsk)->status &= ~TS_USEDFPU; \
- stts(); \
- } \
-} while (0)
-
-
-/*
- * These disable preemption on their own and are safe
- */
-static inline void save_init_fpu( struct task_struct *tsk )
-{
- preempt_disable();
- __save_init_fpu(tsk);
- stts();
- preempt_enable();
-}
-
-#define unlazy_fpu( tsk ) do { \
- preempt_disable(); \
- __unlazy_fpu(tsk); \
- preempt_enable(); \
-} while (0)
-
-#define clear_fpu( tsk ) do { \
- preempt_disable(); \
- __clear_fpu( tsk ); \
- preempt_enable(); \
-} while (0)
-
-/*
- * FPU state interaction...
- */
-extern unsigned short get_fpu_cwd( struct task_struct *tsk );
-extern unsigned short get_fpu_swd( struct task_struct *tsk );
-extern unsigned short get_fpu_mxcsr( struct task_struct *tsk );
-extern asmlinkage void math_state_restore(void);
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387( struct _fpstate __user *buf );
-extern int restore_i387( struct _fpstate __user *buf );
-
-/*
- * ptrace request handers...
- */
-extern int get_fpregs( struct user_i387_struct __user *buf,
- struct task_struct *tsk );
-extern int set_fpregs( struct task_struct *tsk,
- struct user_i387_struct __user *buf );
-
-extern int get_fpxregs( struct user_fxsr_struct __user *buf,
- struct task_struct *tsk );
-extern int set_fpxregs( struct task_struct *tsk,
- struct user_fxsr_struct __user *buf );
-
-/*
- * FPU state for core dumps...
- */
-extern int dump_fpu( struct pt_regs *regs,
- struct user_i387_struct *fpu );
-
-#endif /* __ASM_I386_I387_H */
+++ /dev/null
-/*
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- * x86-64 work by Andi Kleen 2002
- */
-
-#ifndef _ASM_X86_I387_H
-#define _ASM_X86_I387_H
-
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/regset.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/uaccess.h>
-
-extern void fpu_init(void);
-extern unsigned int mxcsr_feature_mask;
-extern void mxcsr_feature_mask_init(void);
-extern void init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-
-extern user_regset_active_fn fpregs_active, xfpregs_active;
-extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
-extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
-
-#ifdef CONFIG_IA32_EMULATION
-struct _fpstate_ia32;
-extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
-extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
-#endif
-
-#ifdef CONFIG_X86_64
-
-/* Ignore delayed exceptions from user space */
-static inline void tolerant_fwait(void)
-{
- asm volatile("1: fwait\n"
- "2:\n"
- " .section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,2b\n"
- " .previous\n");
-}
-
-static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
-{
- int err;
-
- asm volatile("1: rex64/fxrstor (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,3b\n"
- ".previous"
- : [err] "=r" (err)
-#if 0 /* See comment in __save_init_fpu() below. */
- : [fx] "r" (fx), "m" (*fx), "0" (0));
-#else
- : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
-#endif
- if (unlikely(err))
- init_fpu(current);
- return err;
-}
-
-#define X87_FSW_ES (1 << 7) /* Exception Summary */
-
-/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. The kernel data segment can be sometimes 0 and sometimes
- new user value. Both should be ok.
- Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
-{
- if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
- alternative_input(ASM_NOP8 ASM_NOP2,
- " emms\n" /* clear stack tags */
- " fildl %%gs:0", /* load to clear state */
- X86_FEATURE_FXSAVE_LEAK);
-}
-
-static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
-{
- int err;
-
- asm volatile("1: rex64/fxsave (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,3b\n"
- ".previous"
- : [err] "=r" (err), "=m" (*fx)
-#if 0 /* See comment in __fxsave_clear() below. */
- : [fx] "r" (fx), "0" (0));
-#else
- : [fx] "cdaSDb" (fx), "0" (0));
-#endif
- if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
- err = -EFAULT;
- /* No need to clear here because the caller clears USED_MATH */
- return err;
-}
-
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
- /* Using "rex64; fxsave %0" is broken because, if the memory operand
- uses any extended registers for addressing, a second REX prefix
- will be generated (to the assembler, rex64 followed by semicolon
- is a separate instruction), and hence the 64-bitness is lost. */
-#if 0
- /* Using "fxsaveq %0" would be the ideal choice, but is only supported
- starting with gas 2.16. */
- __asm__ __volatile__("fxsaveq %0"
- : "=m" (tsk->thread.i387.fxsave));
-#elif 0
- /* Using, as a workaround, the properly prefixed form below isn't
- accepted by any binutils version so far released, complaining that
- the same type of prefix is used twice if an extended register is
- needed for addressing (fix submitted to mainline 2005-11-21). */
- __asm__ __volatile__("rex64/fxsave %0"
- : "=m" (tsk->thread.i387.fxsave));
-#else
- /* This, however, we can work around by forcing the compiler to select
- an addressing mode that doesn't require extended registers. */
- __asm__ __volatile__("rex64/fxsave %P2(%1)"
- : "=m" (tsk->thread.i387.fxsave)
- : "cdaSDb" (tsk),
- "i" (offsetof(__typeof__(*tsk),
- thread.i387.fxsave)));
-#endif
- clear_fpu_state(&tsk->thread.i387.fxsave);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
- sizeof(tsk->thread.i387.fxsave));
-
- if ((unsigned long)buf % 16)
- printk("save_i387: bad fpstate %p\n", buf);
-
- if (!used_math())
- return 0;
- clear_used_math(); /* trigger finit */
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
- if (err) return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- } else {
- if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct i387_fxsave_struct)))
- return -1;
- }
- return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
- set_used_math();
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
- return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
-#else /* CONFIG_X86_32 */
-
-static inline void tolerant_fwait(void)
-{
- asm volatile("fnclex ; fwait");
-}
-
-static inline void restore_fpu(struct task_struct *tsk)
-{
- /*
- * The "nop" is needed to make the instructions the same
- * length.
- */
- alternative_input(
- "nop ; frstor %1",
- "fxrstor %1",
- X86_FEATURE_FXSR,
- "m" ((tsk)->thread.i387.fxsave));
-}
-
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
-/*
- * These must be called with preempt disabled
- */
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
- /* Use more nops than strictly needed in case the compiler
- varies code */
- alternative_input(
- "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
- "fxsave %[fx]\n"
- "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
- X86_FEATURE_FXSR,
- [fx] "m" (tsk->thread.i387.fxsave),
- [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- GENERIC_NOP8 GENERIC_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387(struct _fpstate __user *buf);
-extern int restore_i387(struct _fpstate __user *buf);
-
-#endif /* CONFIG_X86_64 */
-
-static inline void __unlazy_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
-}
-
-static inline void __clear_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- tolerant_fwait();
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- }
-}
-
-static inline void kernel_fpu_begin(void)
-{
- struct thread_info *me = current_thread_info();
- preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
- clts();
-}
-
-static inline void kernel_fpu_end(void)
-{
- stts();
- preempt_enable();
-}
-
-#ifdef CONFIG_X86_64
-
-static inline void save_init_fpu(struct task_struct *tsk)
-{
- __save_init_fpu(tsk);
- stts();
-}
-
-#define unlazy_fpu __unlazy_fpu
-#define clear_fpu __clear_fpu
-
-#else /* CONFIG_X86_32 */
-
-/*
- * These disable preemption on their own and are safe
- */
-static inline void save_init_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __save_init_fpu(tsk);
- stts();
- preempt_enable();
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __unlazy_fpu(tsk);
- preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __clear_fpu(tsk);
- preempt_enable();
-}
-
-#endif /* CONFIG_X86_64 */
-
-/*
- * ptrace request handlers...
- */
-extern int get_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *tsk);
-extern int set_fpregs(struct task_struct *tsk,
- struct user_i387_struct __user *buf);
-
-struct user_fxsr_struct;
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *tsk);
-extern int set_fpxregs(struct task_struct *tsk,
- struct user_fxsr_struct __user *buf);
-
-/*
- * i387 state interaction
- */
-static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
-{
- if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.cwd;
- } else {
- return (unsigned short)tsk->thread.i387.fsave.cwd;
- }
-}
-
-static inline unsigned short get_fpu_swd(struct task_struct *tsk)
-{
- if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.swd;
- } else {
- return (unsigned short)tsk->thread.i387.fsave.swd;
- }
-}
-
-static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
-{
- if (cpu_has_xmm) {
- return tsk->thread.i387.fxsave.mxcsr;
- } else {
- return MXCSR_DEFAULT;
- }
-}
-
-#endif /* _ASM_X86_I387_H */
projects / linux-2.6 / commitdiff