]> err.no Git - linux-2.6/commitdiff
x86: prepare merger of <asm/alternative_{32,64}.h>
authorH. Peter Anvin <hpa@zytor.com>
Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)
committerIngo Molnar <mingo@elte.hu>
Wed, 30 Jan 2008 12:30:30 +0000 (13:30 +0100)
Prepare for merging <asm/alternative_{32,64}.h> by making the 32- and
64-bit versions textually identical.  This involves:

- removing arbitrary header inclusion differences
- reorganizing the 32-bit version slightly to match the 64-bit version
- using <asm/asm.h> to unify the assembly code
- renaming struct paravirt_patch to struct paravirt_patch_site in the
  64-bit version to match the 32-bit version; there are no references
  to struct paravirt_patch elsewhere in the tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
include/asm-x86/alternative_32.h
include/asm-x86/alternative_64.h

index bda6c810c0f4e3ac48973f3af52fdd478862f05b..4919b5ee8b9f69009773fab9859023375527d539 100644 (file)
@@ -1,23 +1,63 @@
 #ifndef _I386_ALTERNATIVE_H
 #define _I386_ALTERNATIVE_H
 
-#include <asm/types.h>
-#include <linux/stddef.h>
 #include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/asm.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel.  The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information.  That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+               ".section .smp_locks,\"a\"\n"   \
+               _ASM_ALIGN "\n"                 \
+               _ASM_PTR "661f\n" /* address */ \
+               ".previous\n"                   \
+               "661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
+#include <asm/cpufeature.h>
 
 struct alt_instr {
-       u8 *instr;              /* original instruction */
+       u8 *instr;              /* original instruction */
        u8 *replacement;
        u8  cpuid;              /* cpuid bit set for replacement */
        u8  instrlen;           /* length of original instruction */
-       u8  replacementlen;     /* length of new instruction, <= instrlen */
-       u8  pad;
+       u8  replacementlen;     /* length of new instruction, <= instrlen */
+       u8  pad1;
+#ifdef CONFIG_X86_64
+       u32 pad2;
+#endif
 };
 
 extern void alternative_instructions(void);
 extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
 
 struct module;
+
 #ifdef CONFIG_SMP
 extern void alternatives_smp_module_add(struct module *mod, char *name,
                                        void *locks, void *locks_end,
@@ -45,17 +85,17 @@ static inline void alternatives_smp_switch(int smp) {}
  * without volatile and memory clobber.
  */
 #define alternative(oldinstr, newinstr, feature)                       \
-       asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
+       asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
                      ".section .altinstructions,\"a\"\n"               \
-                     "  .align 4\n"                                    \
-                     "  .long 661b\n"            /* label */           \
-                     "  .long 663f\n"            /* new instruction */ \
-                     "  .byte %c0\n"             /* feature bit */     \
-                     "  .byte 662b-661b\n"       /* sourcelen */       \
-                     "  .byte 664f-663f\n"       /* replacementlen */  \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c0\n"           /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */\
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" :: "i" (feature) : "memory")
 
 /*
@@ -66,35 +106,35 @@ static inline void alternatives_smp_switch(int smp) {}
  * Argument numbers start with 1.
  * Best is to use constraints that are fixed size (like (%1) ... "r")
  * If you use variable sized constraints like "m" or "g" in the
- * replacement maake sure to pad to the worst case length.
+ * replacement make sure to pad to the worst case length.
  */
 #define alternative_input(oldinstr, newinstr, feature, input...)       \
        asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
                      ".section .altinstructions,\"a\"\n"               \
-                     "  .align 4\n"                                    \
-                     "  .long 661b\n"            /* label */           \
-                     "  .long 663f\n"            /* new instruction */ \
-                     "  .byte %c0\n"             /* feature bit */     \
-                     "  .byte 662b-661b\n"       /* sourcelen */       \
-                     "  .byte 664f-663f\n"       /* replacementlen */  \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c0\n"           /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */\
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" :: "i" (feature), ##input)
 
 /* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...) \
+#define alternative_io(oldinstr, newinstr, feature, output, input...)  \
        asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
                      ".section .altinstructions,\"a\"\n"               \
-                     "  .align 4\n"                                    \
-                     "  .long 661b\n"            /* label */           \
-                     "  .long 663f\n"            /* new instruction */ \
-                     "  .byte %c[feat]\n"        /* feature bit */     \
-                     "  .byte 662b-661b\n"       /* sourcelen */       \
-                     "  .byte 664f-663f\n"       /* replacementlen */  \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c[feat]\n"      /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" : output : [feat] "i" (feature), ##input)
 
 /*
@@ -103,39 +143,6 @@ static inline void alternatives_smp_switch(int smp) {}
  */
 #define ASM_OUTPUT2(a, b) a, b
 
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel.  The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information.  That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
-               ".section .smp_locks,\"a\"\n"   \
-               "  .align 4\n"                  \
-               "  .long 661f\n" /* address */  \
-               ".previous\n"                   \
-               "661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
 struct paravirt_patch_site;
 #ifdef CONFIG_PARAVIRT
 void apply_paravirt(struct paravirt_patch_site *start,
index ab161e810151aa2fbe9bed5f08fef5194b0f28c2..50efcebae33fedfdef93b0c4be5df65081b6670a 100644 (file)
@@ -1,10 +1,9 @@
 #ifndef _X86_64_ALTERNATIVE_H
 #define _X86_64_ALTERNATIVE_H
 
-#ifdef __KERNEL__
-
 #include <linux/types.h>
 #include <linux/stddef.h>
+#include <asm/asm.h>
 
 /*
  * Alternative inline assembly for SMP.
 #ifdef CONFIG_SMP
 #define LOCK_PREFIX \
                ".section .smp_locks,\"a\"\n"   \
-               "  .align 8\n"                  \
-               "  .quad 661f\n" /* address */  \
+               _ASM_ALIGN "\n"                 \
+               _ASM_PTR "661f\n" /* address */ \
                ".previous\n"                   \
-               "661:\n\tlock; "
+               "661:\n\tlock; "
 
 #else /* ! CONFIG_SMP */
 #define LOCK_PREFIX ""
 #include <asm/cpufeature.h>
 
 struct alt_instr {
-       u8 *instr;              /* original instruction */
+       u8 *instr;              /* original instruction */
        u8 *replacement;
        u8  cpuid;              /* cpuid bit set for replacement */
        u8  instrlen;           /* length of original instruction */
-       u8  replacementlen;     /* length of new instruction, <= instrlen */
-       u8  pad[5];
+       u8  replacementlen;     /* length of new instruction, <= instrlen */
+       u8  pad1;
+#ifdef CONFIG_X86_64
+       u32 pad2;
+#endif
 };
 
 extern void alternative_instructions(void);
@@ -68,9 +70,7 @@ static inline void alternatives_smp_module_add(struct module *mod, char *name,
                                        void *text, void *text_end) {}
 static inline void alternatives_smp_module_del(struct module *mod) {}
 static inline void alternatives_smp_switch(int smp) {}
-#endif
-
-#endif
+#endif /* CONFIG_SMP */
 
 /*
  * Alternative instructions for different CPU types or capabilities.
@@ -84,18 +84,18 @@ static inline void alternatives_smp_switch(int smp) {}
  * For non barrier like inlines please define new variants
  * without volatile and memory clobber.
  */
-#define alternative(oldinstr, newinstr, feature)       \
-       asm volatile ("661:\n\t" oldinstr "\n662:\n"                 \
-                     ".section .altinstructions,\"a\"\n"            \
-                     "  .align 8\n"                                   \
-                     "  .quad 661b\n"            /* label */          \
-                     "  .quad 663f\n"            /* new instruction */ \
-                     "  .byte %c0\n"             /* feature bit */    \
-                     "  .byte 662b-661b\n"       /* sourcelen */      \
-                     "  .byte 664f-663f\n"       /* replacementlen */ \
+#define alternative(oldinstr, newinstr, feature)                       \
+       asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
+                     ".section .altinstructions,\"a\"\n"               \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c0\n"           /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" :: "i" (feature) : "memory")
 
 /*
@@ -111,30 +111,30 @@ static inline void alternatives_smp_switch(int smp) {}
 #define alternative_input(oldinstr, newinstr, feature, input...)       \
        asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
                      ".section .altinstructions,\"a\"\n"               \
-                     "  .align 8\n"                                    \
-                     "  .quad 661b\n"            /* label */           \
-                     "  .quad 663f\n"            /* new instruction */ \
-                     "  .byte %c0\n"             /* feature bit */     \
-                     "  .byte 662b-661b\n"       /* sourcelen */       \
-                     "  .byte 664f-663f\n"       /* replacementlen */  \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c0\n"           /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" :: "i" (feature), ##input)
 
 /* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...) \
+#define alternative_io(oldinstr, newinstr, feature, output, input...)  \
        asm volatile ("661:\n\t" oldinstr "\n662:\n"                    \
                      ".section .altinstructions,\"a\"\n"               \
-                     "  .align 8\n"                                    \
-                     "  .quad 661b\n"            /* label */           \
-                     "  .quad 663f\n"            /* new instruction */ \
-                     "  .byte %c[feat]\n"        /* feature bit */     \
-                     "  .byte 662b-661b\n"       /* sourcelen */       \
-                     "  .byte 664f-663f\n"       /* replacementlen */  \
+                     _ASM_ALIGN "\n"                                   \
+                     _ASM_PTR "661b\n"         /* label */             \
+                     _ASM_PTR "663f\n"         /* new instruction */   \
+                     "  .byte %c[feat]\n"      /* feature bit */       \
+                     "  .byte 662b-661b\n"     /* sourcelen */         \
+                     "  .byte 664f-663f\n"     /* replacementlen */    \
                      ".previous\n"                                     \
                      ".section .altinstr_replacement,\"ax\"\n"         \
-                     "663:\n\t" newinstr "\n664:\n"   /* replacement */ \
+                     "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
                      ".previous" : output : [feat] "i" (feature), ##input)
 
 /*
@@ -143,15 +143,17 @@ static inline void alternatives_smp_switch(int smp) {}
  */
 #define ASM_OUTPUT2(a, b) a, b
 
-struct paravirt_patch;
+struct paravirt_patch_site;
 #ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
+void apply_paravirt(struct paravirt_patch_site *start,
+                   struct paravirt_patch_site *end);
 #else
 static inline void
-apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end)
+apply_paravirt(struct paravirt_patch_site *start,
+              struct paravirt_patch_site *end)
 {}
-#define __parainstructions NULL
-#define __parainstructions_end NULL
+#define __parainstructions     NULL
+#define __parainstructions_end NULL
 #endif
 
 extern void text_poke(void *addr, unsigned char *opcode, int len);