ide: update references to Documentation/ide/ide.txt (v2)

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 30b327a116eaa8d15af97c3047ab2c07ebc41089..042073f656e53e01daff332e1e9ee500ad99efc0 100644 (file)
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -183,8 +183,6 @@ i386/
        - directory with info about Linux on Intel 32 bit architecture.
 ia64/
        - directory with info about Linux on Intel 64 bit architecture.
-ide.txt
-       - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
 infiniband/
        - directory with documents concerning Linux InfiniBand support.
 initrd.txt

diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd
index 29721bfcde129f98a0f35eb51b72582cf776e70c..91c0dcc6fa5ca92d29124951e83f7e8c8b4e3b32 100644 (file)
--- a/Documentation/cdrom/ide-cd
+++ b/Documentation/cdrom/ide-cd
@@ -45,7 +45,7 @@ This driver provides the following features:
 ---------------
 
 0. The ide-cd relies on the ide disk driver.  See
-   Documentation/ide.txt for up-to-date information on the ide
+   Documentation/ide/ide.txt for up-to-date information on the ide
    driver.
 
 1. Make sure that the ide and ide-cd drivers are compiled into the
@@ -64,7 +64,7 @@ This driver provides the following features:
 
    Depending on what type of IDE interface you have, you may need to
    specify additional configuration options.  See
-   Documentation/ide.txt.
+   Documentation/ide/ide.txt.
 
 2. You should also ensure that the iso9660 filesystem is either
    compiled into the kernel or available as a loadable module.  You
@@ -84,7 +84,7 @@ This driver provides the following features:
    on the primary IDE interface are called `hda' and `hdb',
    respectively.  The drives on the secondary interface are called
    `hdc' and `hdd'.  (Interfaces at other locations get other letters
-   in the third position; see Documentation/ide.txt.)
+   in the third position; see Documentation/ide/ide.txt.)
 
    If you want your CDROM drive to be found automatically by the
    driver, you should make sure your IDE interface uses either the
@@ -93,7 +93,7 @@ This driver provides the following features:
    be jumpered as `master'.  (If for some reason you cannot configure
    your system in this manner, you can probably still use the driver.
    You may have to pass extra configuration information to the kernel
-   when you boot, however.  See Documentation/ide.txt for more
+   when you boot, however.  See Documentation/ide/ide.txt for more
    information.)
 
 4. Boot the system.  If the drive is recognized, you should see a
@@ -201,7 +201,7 @@ TEST
 This section discusses some common problems encountered when trying to
 use the driver, and some possible solutions.  Note that if you are
 experiencing problems, you should probably also review
-Documentation/ide.txt for current information about the underlying
+Documentation/ide/ide.txt for current information about the underlying
 IDE support code.  Some of these items apply only to earlier versions
 of the driver, but are mentioned here for completeness.
 
@@ -211,7 +211,7 @@ from the driver.
 a. Drive is not detected during booting.
 
    - Review the configuration instructions above and in
-     Documentation/ide.txt, and check how your hardware is
+     Documentation/ide/ide.txt, and check how your hardware is
      configured.
 
    - If your drive is the only device on an IDE interface, it should
@@ -219,7 +219,7 @@ a. Drive is not detected during booting.
 
    - If your IDE interface is not at the standard addresses of 0x170
      or 0x1f0, you'll need to explicitly inform the driver using a
-     lilo option.  See Documentation/ide.txt.  (This feature was
+     lilo option.  See Documentation/ide/ide.txt.  (This feature was
      added around kernel version 1.3.30.)
 
    - If the autoprobing is not finding your drive, you can tell the
@@ -245,7 +245,7 @@ a. Drive is not detected during booting.
      Support for some interfaces needing extra initialization is
      provided in later 1.3.x kernels.  You may need to turn on
      additional kernel configuration options to get them to work;
-     see Documentation/ide.txt.
+     see Documentation/ide/ide.txt.
 
      Even if support is not available for your interface, you may be
      able to get it to work with the following procedure.  First boot
@@ -299,7 +299,7 @@ c. System hangups.
     be worked around by specifying the `serialize' option when
     booting.  Recent kernels should be able to detect the need for
     this automatically in most cases, but the detection is not
-    foolproof.  See Documentation/ide.txt for more information
+    foolproof.  See Documentation/ide/ide.txt for more information
     about the `serialize' option and the CMD640B.
 
   - Note that many MS-DOS CDROM drivers will work with such buggy

diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX
new file mode 100644 (file)
index 0000000..d6b7788
--- /dev/null
+++ b/Documentation/ide/00-INDEX
@@ -0,0 +1,12 @@
+00-INDEX
+       - this file
+ChangeLog.ide-cd.1994-2004
+       - ide-cd changelog
+ChangeLog.ide-floppy.1996-2002
+       - ide-floppy changelog
+ChangeLog.ide-tape.1995-2002
+       - ide-tape changelog
+ide-tape.txt
+       - info on the IDE ATAPI streaming tape driver
+ide.txt
+       - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9a5b6658c65e0ee4a6b55df39da68d5836e9889b..533e67febf813a18d6af172ac40fcf7c9e0def88 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -712,7 +712,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format: <cyl>,<head>,<sect>
 
        hd?=            [HW] (E)IDE subsystem
-       hd?lun=         See Documentation/ide.txt.
+       hd?lun=         See Documentation/ide/ide.txt.
 
        highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
                        size of <nn>. This works even on boxes that have no
@@ -766,14 +766,14 @@ and is between 256 and 4096 characters. It is defined in the file
 
        ide=            [HW] (E)IDE subsystem
                        Format: ide=nodma or ide=doubler or ide=reverse
-                       See Documentation/ide.txt.
+                       See Documentation/ide/ide.txt.
 
        ide?=           [HW] (E)IDE subsystem
                        Format: ide?=noprobe or chipset specific parameters.
-                       See Documentation/ide.txt.
+                       See Documentation/ide/ide.txt.
 
        idebus=         [HW] (E)IDE subsystem - VLB/PCI bus speed
-                       See Documentation/ide.txt.
+                       See Documentation/ide/ide.txt.
 
        idle=           [X86]
                        Format: idle=poll or idle=mwait

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index df752e690e4739f595dee6dde3c103db522da5fa..eed6d8e1b5c7abfbff3d693bc072bb3040ea3e1e 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -50,7 +50,7 @@ menuconfig IDE
          To compile this driver as a module, choose M here: the
          module will be called ide.
 
-         For further information, please read <file:Documentation/ide.txt>.
+         For further information, please read <file:Documentation/ide/ide.txt>.
 
          If unsure, say Y.
 
@@ -77,7 +77,7 @@ config BLK_DEV_IDE
          Useful information about large (>540 MB) IDE disks, multiple
          interfaces, what to do if ATA/IDE devices are not automatically
          detected, sound card ATA/IDE ports, module support, and other
-         topics, is contained in <file:Documentation/ide.txt>. For detailed
+         topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
          information about hard drives, consult the Disk-HOWTO and the
          Multi-Disk-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
@@ -87,7 +87,7 @@ config BLK_DEV_IDE
          <ftp://ibiblio.org/pub/Linux/system/hardware/>.
 
          To compile this driver as a module, choose M here and read
-         <file:Documentation/ide.txt>. The module will be called ide-mod.
+         <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
          Do not compile this driver as a module if your root file system (the
          one containing the directory /) is located on an IDE device.
 
@@ -98,7 +98,7 @@ config BLK_DEV_IDE
 
 if BLK_DEV_IDE
 
-comment "Please see Documentation/ide.txt for help/info on IDE drives"
+comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
 
 config BLK_DEV_IDE_SATA
        bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
@@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE
          along with other IDE devices, as "hdb" or "hdc", or something
          similar, and will be mapped to a character device such as "ht0"
          (check the boot messages with dmesg).  Be sure to consult the
-         <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
-         for usage information.
+         <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
+         files for usage information.
 
          To compile this driver as a module, choose M here: the
          module will be called ide-tape.
@@ -358,7 +358,7 @@ config BLK_DEV_CMD640
 
          The CMD640 chip is also used on add-in cards by Acculogic, and on
          the "CSA-6400E PCI to IDE controller" that some people have. For
-         details, read <file:Documentation/ide.txt>.
+         details, read <file:Documentation/ide/ide.txt>.
 
 config BLK_DEV_CMD640_ENHANCED
        bool "CMD640 enhanced support"
@@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED
        help
          This option includes support for setting/autotuning PIO modes and
          prefetch on CMD640 IDE interfaces.  For details, read
-         <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+         <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
          and your BIOS does not already do this for you, then say Y here.
          Otherwise say N.
 
@@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX
          This driver is enabled at runtime using the "ali14xx.probe" kernel
          boot parameter.  It enables support for the secondary IDE interface
          of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
-         I/O speeds to be set as well.  See the files
-         <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
-         for more info.
+         I/O speeds to be set as well.
+         See the files <file:Documentation/ide/ide.txt> and
+         <file:drivers/ide/legacy/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
        tristate "DTC-2278 support"
@@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278
          This driver is enabled at runtime using the "dtc2278.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the DTC-2278 card, and permits faster I/O speeds to be set as
-         well. See the <file:Documentation/ide.txt> and
+         well. See the <file:Documentation/ide/ide.txt> and
          <file:drivers/ide/legacy/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
@@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B
          This driver is enabled at runtime using the "ht6560b.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the Holtek card, and permits faster I/O speeds to be set as well.
-         See the <file:Documentation/ide.txt> and
+         See the <file:Documentation/ide/ide.txt> and
          <file:drivers/ide/legacy/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
@@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX
        help
          This driver is enabled at runtime using the "qd65xx.probe" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the
-         <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+         <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
          for more info.
 
 config BLK_DEV_UMC8672
@@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672
          This driver is enabled at runtime using the "umc8672.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
          of the UMC-8672, and permits faster I/O speeds to be set as well.
-         See the files <file:Documentation/ide.txt> and
+         See the files <file:Documentation/ide/ide.txt> and
          <file:drivers/ide/legacy/umc8672.c> for more info.
 
 endif

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c2b791224097e95a6c71bcde41cba974b8854894..9976f9d627d401113e5244fd5e20cfc01043fb01 100644 (file)
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1180,7 +1180,7 @@ static int __initdata is_chipset_set[MAX_HWIFS];
  * ide_setup() gets called VERY EARLY during initialization,
  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
  *
- * Remember to update Documentation/ide.txt if you change something here.
+ * Remember to update Documentation/ide/ide.txt if you change something here.
  */
 static int __init ide_setup(char *s)
 {