V4L/DVB (5311): Tda1004x driver updates

There are the following changes:
- separate configuration of IF and GPIOs.
- set GPIOs before firmware load. This helps to avoid I2C address
  collisions.
- if desired invert GPIOs at sleep (automatic return to analog mode of card).
- added 3 tuner configuration bytes to config stuct.
- added i2c gate address to config struct.
- moved _state struct declaration to header file to make it accessible
  on board layer.
- added "conf_probed" to the state struct to allow i.e. probing for correct
  tuner version.
- changed firmware load mechanism to always:
  + check if already loaded
  + try to boot from eeprom
  + try downlad from host
- corrected name of tda10046 firmware image (backward compatible).

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index f4a9cf9d26d07d11d44ceee4cdb378ebfe909a21..c47501ae8b0e588ae0aed184700f61b877b9ea6a 100644 (file)
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -40,20 +40,6 @@
 #include "dvb_frontend.h"
 #include "tda1004x.h"
 
-enum tda1004x_demod {
-       TDA1004X_DEMOD_TDA10045,
-       TDA1004X_DEMOD_TDA10046,
-};
-
-struct tda1004x_state {
-       struct i2c_adapter* i2c;
-       const struct tda1004x_config* config;
-       struct dvb_frontend frontend;
-
-       /* private demod data */
-       enum tda1004x_demod demod_type;
-};
-
 static int debug;
 #define dprintk(args...) \
        do { \
@@ -507,8 +493,13 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
                tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
        }
        tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
+       /* set GPIO 1 and 3 */
+       if (state->config->gpio_config != TDA10046_GPTRI) {
+               tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
+               tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
+       }
        /* let the clocks recover from sleep */
-       msleep(5);
+       msleep(10);
 
        /* The PLLs need to be reprogrammed after sleep */
        tda10046_init_plls(fe);
@@ -517,25 +508,29 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
        if (tda1004x_check_upload_ok(state) == 0)
                return 0;
 
-       if (state->config->request_firmware != NULL) {
-               /* request the firmware, this will block until someone uploads it */
-               printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
-               ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
+       printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
+       tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4);
+       msleep(300);
+       /* don't re-upload unless necessary */
+       if (tda1004x_check_upload_ok(state) == 0)
+               return 0;
+
+       /* request the firmware, this will block until someone uploads it */
+       printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
+       ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
+       if (ret) {
+               /* remain compatible to old bug: try to load with tda10045 image name */
+               ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
                if (ret) {
                        printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
                        return ret;
-               }
-               tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
-               ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
-               release_firmware(fw);
-               if (ret)
-                       return ret;
-       } else {
-               /* boot from firmware eeprom */
-               printk(KERN_INFO "tda1004x: booting from eeprom\n");
-               tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4);
-               msleep(300);
+               } else
+                       printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
+                                         TDA10046_DEFAULT_FIRMWARE);
        }
+       tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
+       ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
+       release_firmware(fw);
        return tda1004x_check_upload_ok(state);
 }
 
@@ -638,37 +633,25 @@ static int tda10046_init(struct dvb_frontend* fe)
        switch (state->config->agc_config) {
        case TDA10046_AGC_DEFAULT:
                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+               tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
                break;
        case TDA10046_AGC_IFO_AUTO_NEG:
                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+               tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
                break;
        case TDA10046_AGC_IFO_AUTO_POS:
                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
+               tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00);  // set AGC polarities
                break;
-       case TDA10046_AGC_TDA827X_GP11:
+       case TDA10046_AGC_TDA827X:
                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
                tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
                tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
-               break;
-       case TDA10046_AGC_TDA827X_GP00:
-               tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
-               tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
-               tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
-               break;
-       case TDA10046_AGC_TDA827X_GP01:
-               tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
-               tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
-               tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
-               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+               tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
                break;
        }
        tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
-       tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
+       tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x79); // Turn IF AGC output on
        tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0);    // }
        tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
        tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0);     // }
@@ -1165,6 +1148,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
 static int tda1004x_sleep(struct dvb_frontend* fe)
 {
        struct tda1004x_state* state = fe->demodulator_priv;
+       int gpio_conf;
 
        switch (state->demod_type) {
        case TDA1004X_DEMOD_TDA10045:
@@ -1174,6 +1158,12 @@ static int tda1004x_sleep(struct dvb_frontend* fe)
        case TDA1004X_DEMOD_TDA10046:
                /* set outputs to tristate */
                tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
+               /* invert GPIO 1 and 3 if desired*/
+               gpio_conf = state->config->gpio_config;
+               if (gpio_conf >= TDA10046_GP00_I)
+                       tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
+                                                       (gpio_conf & 0x0f) ^ 0x0a);
+
                tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
                break;
        }

diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index ec502d71b83c6c170a993d0604e705fd96a10338..886db3f75d5686c535e5572be53525f7c95f73e0 100644 (file)
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,9 +35,23 @@ enum tda10046_agc {
        TDA10046_AGC_DEFAULT,           /* original configuration */
        TDA10046_AGC_IFO_AUTO_NEG,      /* IF AGC only, automatic, negtive */
        TDA10046_AGC_IFO_AUTO_POS,      /* IF AGC only, automatic, positive */
-       TDA10046_AGC_TDA827X_GP11,      /* IF AGC only, special setup for tda827x */
-       TDA10046_AGC_TDA827X_GP00,      /* same as above, but GPIOs 0 */
-       TDA10046_AGC_TDA827X_GP01,      /* same as above, but GPIO3=0 GPIO1=1*/
+       TDA10046_AGC_TDA827X,           /* IF AGC only, special setup for tda827x */
+};
+
+/* Many (hybrid) boards use GPIO 1 and 3
+       GPIO1   analog - dvb switch
+       GPIO3   firmware eeprom address switch
+*/
+enum tda10046_gpio {
+       TDA10046_GPTRI  = 0x00,         /* All GPIOs tristate */
+       TDA10046_GP00   = 0x40,         /* GPIO3=0, GPIO1=0 */
+       TDA10046_GP01   = 0x42,         /* GPIO3=0, GPIO1=1 */
+       TDA10046_GP10   = 0x48,         /* GPIO3=1, GPIO1=0 */
+       TDA10046_GP11   = 0x4a,         /* GPIO3=1, GPIO1=1 */
+       TDA10046_GP00_I = 0x80,         /* GPIO3=0, GPIO1=0, invert in sleep mode*/
+       TDA10046_GP01_I = 0x82,         /* GPIO3=0, GPIO1=1, invert in sleep mode */
+       TDA10046_GP10_I = 0x88,         /* GPIO3=1, GPIO1=0, invert in sleep mode */
+       TDA10046_GP11_I = 0x8a,         /* GPIO3=1, GPIO1=1, invert in sleep mode */
 };
 
 enum tda10046_if {
@@ -67,11 +81,38 @@ struct tda1004x_config
        /* AGC configuration */
        enum tda10046_agc agc_config;
 
+       /* setting of GPIO1 and 3 */
+       enum tda10046_gpio gpio_config;
+
+       /* slave address and configuration of the tuner */
+       u8 tuner_address;
+       u8 tuner_config;
+       u8 antenna_switch;
+
+       /* if the board uses another I2c Bridge (tda8290), its address */
+       u8 i2c_gate;
+
        /* request firmware for device */
-       /* set this to NULL if the card has a firmware EEPROM */
        int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
+enum tda1004x_demod {
+       TDA1004X_DEMOD_TDA10045,
+       TDA1004X_DEMOD_TDA10046,
+};
+
+struct tda1004x_state {
+       struct i2c_adapter* i2c;
+       const struct tda1004x_config* config;
+       struct dvb_frontend frontend;
+
+       /* this allows to store probed board information */
+       int     conf_probed;
+
+       /* private demod data */
+       enum tda1004x_demod demod_type;
+};
+
 #if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
                                            struct i2c_adapter* i2c);

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index e3059fd339510968861e96839e85a686a9949dc4..6d148a7601ac4a58ac5ba915ac090254de5c873e 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -416,7 +416,7 @@ static struct tda1004x_config philips_europa_config = {
        .xtal_freq     = TDA10046_XTAL_4M,
        .agc_config    = TDA10046_AGC_IFO_AUTO_POS,
        .if_freq       = TDA10046_FREQ_052,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -548,7 +548,7 @@ static struct tda1004x_config medion_cardbus = {
        .xtal_freq     = TDA10046_XTAL_16M,
        .agc_config    = TDA10046_AGC_IFO_AUTO_NEG,
        .if_freq       = TDA10046_FREQ_3613,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -681,9 +681,10 @@ static struct tda1004x_config tda827x_lifeview_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -885,9 +886,10 @@ static struct tda1004x_config philips_tiger_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 /* ------------------------------------------------------------------ */
 
@@ -918,9 +920,10 @@ static struct tda1004x_config cinergy_ht_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP01,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP01_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -930,7 +933,8 @@ static struct tda1004x_config pinnacle_pctv_310i_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
        .request_firmware = philips_tda1004x_request_firmware,
 };
@@ -942,7 +946,8 @@ static struct tda1004x_config hauppauge_hvr_1110_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
        .request_firmware = philips_tda1004x_request_firmware,
 };
@@ -954,7 +959,8 @@ static struct tda1004x_config asus_p7131_dual_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
        .request_firmware = philips_tda1004x_request_firmware,
 };
@@ -1006,9 +1012,10 @@ static struct tda1004x_config lifeview_trio_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP00,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP00_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -1043,9 +1050,10 @@ static struct tda1004x_config ads_tech_duo_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP00,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP00_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -1068,9 +1076,10 @@ static struct tda1004x_config tevion_dvbt220rf_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 /* ------------------------------------------------------------------ */
@@ -1113,9 +1122,10 @@ static struct tda1004x_config md8800_dvbt_config = {
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X_GP11,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = NULL,
+       .request_firmware = philips_tda1004x_request_firmware,
 };
 
 static struct tda10086_config flydvbs = {