--- /dev/null
- (priv->scan_bands == 2) ? "2.4" : "5.2",
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-sta.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req. This should be set long enough to hear probe responses
+ * from more than one AP. */
+#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52 (10)
+
+/* For faster active scanning, scan will move to the next channel if fewer than
+ * PLCP_QUIET_THRESH packets are heard on this channel within
+ * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
+ * time if it's a quiet channel (nothing responded to our probe, and there's
+ * no other traffic).
+ * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
+#define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
+#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IWL_PASSIVE_DWELL_TIME_52 (10)
+#define IWL_PASSIVE_DWELL_BASE (100)
+#define IWL_CHANNEL_TUNE_TIME 5
+
+static int scan_tx_ant[3] = {
+ RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK
+};
+
+static int iwl_is_empty_essid(const char *essid, int essid_len)
+{
+ /* Single white space is for Linksys APs */
+ if (essid_len == 1 && essid[0] == ' ')
+ return 1;
+
+ /* Otherwise, if the entire essid is 0, we assume it is hidden */
+ while (essid_len) {
+ essid_len--;
+ if (essid[essid_len] != '\0')
+ return 0;
+ }
+
+ return 1;
+}
+
+
+
+const char *iwl_escape_essid(const char *essid, u8 essid_len)
+{
+ static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ const char *s = essid;
+ char *d = escaped;
+
+ if (iwl_is_empty_essid(essid, essid_len)) {
+ memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+ return escaped;
+ }
+
+ essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
+ while (essid_len--) {
+ if (*s == '\0') {
+ *d++ = '\\';
+ *d++ = '0';
+ s++;
+ } else
+ *d++ = *s++;
+ }
+ *d = '\0';
+ return escaped;
+}
+EXPORT_SYMBOL(iwl_escape_essid);
+
+/**
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ *
+ * NOTE: priv->mutex is not required before calling this function
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+ if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+ clear_bit(STATUS_SCANNING, &priv->status);
+ return 0;
+ }
+
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN("Queuing scan abort.\n");
+ set_bit(STATUS_SCAN_ABORTING, &priv->status);
+ queue_work(priv->workqueue, &priv->abort_scan);
+
+ } else
+ IWL_DEBUG_SCAN("Scan abort already in progress.\n");
+
+ return test_bit(STATUS_SCANNING, &priv->status);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_scan_cancel);
+/**
+ * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ * NOTE: priv->mutex must be held before calling this function
+ */
+int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+{
+ unsigned long now = jiffies;
+ int ret;
+
+ ret = iwl_scan_cancel(priv);
+ if (ret && ms) {
+ mutex_unlock(&priv->mutex);
+ while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
+ test_bit(STATUS_SCANNING, &priv->status))
+ msleep(1);
+ mutex_lock(&priv->mutex);
+
+ return test_bit(STATUS_SCANNING, &priv->status);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(iwl_scan_cancel_timeout);
+
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+ int ret = 0;
+ struct iwl_rx_packet *res;
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_ABORT_CMD,
+ .meta.flags = CMD_WANT_SKB,
+ };
+
+ /* If there isn't a scan actively going on in the hardware
+ * then we are in between scan bands and not actually
+ * actively scanning, so don't send the abort command */
+ if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ return 0;
+ }
+
+ ret = iwl_send_cmd_sync(priv, &cmd);
+ if (ret) {
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ return ret;
+ }
+
+ res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ if (res->u.status != CAN_ABORT_STATUS) {
+ /* The scan abort will return 1 for success or
+ * 2 for "failure". A failure condition can be
+ * due to simply not being in an active scan which
+ * can occur if we send the scan abort before we
+ * the microcode has notified us that a scan is
+ * completed. */
+ IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ }
+
+ dev_kfree_skb_any(cmd.meta.u.skb);
+
+ return ret;
+}
+
+
+/* Service response to REPLY_SCAN_CMD (0x80) */
+static void iwl_rx_reply_scan(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanreq_notification *notif =
+ (struct iwl_scanreq_notification *)pkt->u.raw;
+
+ IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service SCAN_START_NOTIFICATION (0x82) */
+static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanstart_notification *notif =
+ (struct iwl_scanstart_notification *)pkt->u.raw;
+ priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+ IWL_DEBUG_SCAN("Scan start: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ notif->tsf_high,
+ notif->tsf_low, notif->status, notif->beacon_timer);
+}
+
+/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
+static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scanresults_notification *notif =
+ (struct iwl_scanresults_notification *)pkt->u.raw;
+
+ IWL_DEBUG_SCAN("Scan ch.res: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d "
+ "elapsed=%lu usec (%dms since last)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ le32_to_cpu(notif->statistics[0]),
+ le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
+ jiffies_to_msecs(elapsed_jiffies
+ (priv->last_scan_jiffies, jiffies)));
+#endif
+
+ priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
+}
+
+/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
+static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
+
+ IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+ scan_notif->scanned_channels,
+ scan_notif->tsf_low,
+ scan_notif->tsf_high, scan_notif->status);
+
+ /* The HW is no longer scanning */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+
+ /* The scan completion notification came in, so kill that timer... */
+ cancel_delayed_work(&priv->scan_check);
+
+ IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
- /* Remove this scanned band from the list
- * of pending bands to scan */
- priv->scan_bands--;
++ (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
++ "2.4" : "5.2",
+ jiffies_to_msecs(elapsed_jiffies
+ (priv->scan_pass_start, jiffies)));
+
- if (priv->scan_bands > 0)
++ /* Remove this scanned band from the list of pending
++ * bands to scan, band G precedes A in order of scanning
++ * as seen in iwl_bg_request_scan */
++ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
++ priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
++ else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
++ priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
+
+ /* If a request to abort was given, or the scan did not succeed
+ * then we reset the scan state machine and terminate,
+ * re-queuing another scan if one has been requested */
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_INFO("Aborted scan completed.\n");
+ clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+ } else {
+ /* If there are more bands on this scan pass reschedule */
- IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
++ if (priv->scan_bands)
+ goto reschedule;
+ }
+
+ priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
+ IWL_DEBUG_INFO("Setting scan to off\n");
+
+ clear_bit(STATUS_SCANNING, &priv->status);
+
+ IWL_DEBUG_INFO("Scan took %dms\n",
+ jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
+
+ queue_work(priv->workqueue, &priv->scan_completed);
+
+ return;
+
+reschedule:
+ priv->scan_pass_start = jiffies;
+ queue_work(priv->workqueue, &priv->request_scan);
+}
+
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
+{
+ /* scan handlers */
+ priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
+ priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
+ priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
+ iwl_rx_scan_results_notif;
+ priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
+ iwl_rx_scan_complete_notif;
+}
+EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
+
+static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ if (band == IEEE80211_BAND_5GHZ)
+ return IWL_ACTIVE_DWELL_TIME_52;
+ else
+ return IWL_ACTIVE_DWELL_TIME_24;
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+ enum ieee80211_band band)
+{
+ u16 active = iwl_get_active_dwell_time(priv, band);
+ u16 passive = (band != IEEE80211_BAND_5GHZ) ?
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
+ IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
+
+ if (iwl_is_associated(priv)) {
+ /* If we're associated, we clamp the maximum passive
+ * dwell time to be 98% of the beacon interval (minus
+ * 2 * channel tune time) */
+ passive = priv->beacon_int;
+ if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
+ passive = IWL_PASSIVE_DWELL_BASE;
+ passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+ }
+
+ if (passive <= active)
+ passive = active + 1;
+
+ return passive;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 is_active, u8 direct_mask,
+ struct iwl_scan_channel *scan_ch)
+{
+ const struct ieee80211_channel *channels = NULL;
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband)
+ return 0;
+
+ channels = sband->channels;
+
+ active_dwell = iwl_get_active_dwell_time(priv, band);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ for (i = 0, added = 0; i < sband->n_channels; i++) {
+ if (channels[i].flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ scan_ch->channel =
+ ieee80211_frequency_to_channel(channels[i].center_freq);
+
+ ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
+ if (!is_channel_valid(ch_info)) {
- priv->scan_bands = 2;
++ IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
+ scan_ch->channel);
+ continue;
+ }
+
+ if (!is_active || is_channel_passive(ch_info) ||
+ (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ scan_ch->type = 0;
+ else
+ scan_ch->type = 1;
+
+ if (scan_ch->type & 1)
+ scan_ch->type |= (direct_mask << 1);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else {
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ }
+
+ IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
+ scan_ch->channel,
+ (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+ (scan_ch->type & 1) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ IWL_DEBUG_SCAN("total channels to scan %d \n", added);
+ return added;
+}
+
+void iwl_init_scan_params(struct iwl_priv *priv)
+{
+ if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
+ priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = RATE_MCS_ANT_INIT_IND;
+ if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
+ priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = RATE_MCS_ANT_INIT_IND;
+}
+
+int iwl_scan_initiate(struct iwl_priv *priv)
+{
+ if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
+ IWL_ERROR("APs don't scan.\n");
+ return 0;
+ }
+
+ if (!iwl_is_ready_rf(priv)) {
+ IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
+ return -EIO;
+ }
+
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_SCAN("Scan already in progress.\n");
+ return -EAGAIN;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_SCAN("Scan request while abort pending. "
+ "Queuing.\n");
+ return -EAGAIN;
+ }
+
+ IWL_DEBUG_INFO("Starting scan...\n");
- switch (priv->scan_bands) {
- case 2:
++ if (priv->cfg->sku & IWL_SKU_G)
++ priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
++ if (priv->cfg->sku & IWL_SKU_A)
++ priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
+ set_bit(STATUS_SCANNING, &priv->status);
+ priv->scan_start = jiffies;
+ priv->scan_pass_start = priv->scan_start;
+
+ queue_work(priv->workqueue, &priv->request_scan);
+
+ return 0;
+}
+EXPORT_SYMBOL(iwl_scan_initiate);
+
+#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
+
+static void iwl_bg_scan_check(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, scan_check.work);
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ mutex_lock(&priv->mutex);
+ if (test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG(IWL_DL_SCAN, "Scan completion watchdog resetting "
+ "adapter (%dms)\n",
+ jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+
+ if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+ iwl_send_scan_abort(priv);
+ }
+ mutex_unlock(&priv->mutex);
+}
+/**
+ * iwl_supported_rate_to_ie - fill in the supported rate in IE field
+ *
+ * return : set the bit for each supported rate insert in ie
+ */
+static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
+ u16 basic_rate, int *left)
+{
+ u16 ret_rates = 0, bit;
+ int i;
+ u8 *cnt = ie;
+ u8 *rates = ie + 1;
+
+ for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
+ if (bit & supported_rate) {
+ ret_rates |= bit;
+ rates[*cnt] = iwl_rates[i].ieee |
+ ((bit & basic_rate) ? 0x80 : 0x00);
+ (*cnt)++;
+ (*left)--;
+ if ((*left <= 0) ||
+ (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
+ break;
+ }
+ }
+
+ return ret_rates;
+}
+
+
+static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
+ u8 *pos, int *left)
+{
+ struct ieee80211_ht_cap *ht_cap;
+
+ if (!sband || !sband->ht_info.ht_supported)
+ return;
+
+ if (*left < sizeof(struct ieee80211_ht_cap))
+ return;
+
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ ht_cap = (struct ieee80211_ht_cap *) pos;
+
+ ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
+ memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
+ ht_cap->ampdu_params_info =
+ (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
+ ((sband->ht_info.ampdu_density << 2) &
+ IEEE80211_HT_CAP_AMPDU_DENSITY);
+ *left -= sizeof(struct ieee80211_ht_cap);
+}
+
+/**
+ * iwl_fill_probe_req - fill in all required fields and IE for probe request
+ */
+
+static u16 iwl_fill_probe_req(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ struct ieee80211_mgmt *frame,
+ int left)
+{
+ int len = 0;
+ u8 *pos = NULL;
+ u16 active_rates, ret_rates, cck_rates, active_rate_basic;
+ const struct ieee80211_supported_band *sband =
+ iwl_get_hw_mode(priv, band);
+
+
+ /* Make sure there is enough space for the probe request,
+ * two mandatory IEs and the data */
+ left -= 24;
+ if (left < 0)
+ return 0;
+
+ frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+ memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
+ memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
+ memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
+ frame->seq_ctrl = 0;
+
+ len += 24;
+
+ /* ...next IE... */
+ pos = &frame->u.probe_req.variable[0];
+
+ /* fill in our indirect SSID IE */
+ left -= 2;
+ if (left < 0)
+ return 0;
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = 0;
+
+ len += 2;
+
+ /* fill in supported rate */
+ left -= 2;
+ if (left < 0)
+ return 0;
+
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos = 0;
+
+ /* exclude 60M rate */
+ active_rates = priv->rates_mask;
+ active_rates &= ~IWL_RATE_60M_MASK;
+
+ active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
+
+ cck_rates = IWL_CCK_RATES_MASK & active_rates;
+ ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
+ active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
+ active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ len += 2 + *pos;
+ pos += (*pos) + 1;
+
+ if (active_rates == 0)
+ goto fill_end;
+
+ /* fill in supported extended rate */
+ /* ...next IE... */
+ left -= 2;
+ if (left < 0)
+ return 0;
+ /* ... fill it in... */
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos = 0;
+ iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
+ if (*pos > 0) {
+ len += 2 + *pos;
+ pos += (*pos) + 1;
+ } else {
+ pos--;
+ }
+
+ fill_end:
+
+ left -= 2;
+ if (left < 0)
+ return 0;
+
+ *pos++ = WLAN_EID_HT_CAPABILITY;
+ *pos = 0;
+ iwl_ht_cap_to_ie(sband, pos, &left);
+ if (*pos > 0)
+ len += 2 + *pos;
+
+ return (u16)len;
+}
+
+static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band)
+{
+ int i, ind;
+
+ ind = priv->scan_tx_ant[band];
+ for (i = 0; i < priv->hw_params.tx_chains_num; i++) {
+ ind = (ind+1) >= priv->hw_params.tx_chains_num ? 0 : ind+1;
+ if (priv->hw_params.valid_tx_ant & (1 << ind)) {
+ priv->scan_tx_ant[band] = ind;
+ break;
+ }
+ }
+
+ return scan_tx_ant[ind];
+}
+
+
+static void iwl_bg_request_scan(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, request_scan);
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct iwl_scan_cmd),
+ .meta.flags = CMD_SIZE_HUGE,
+ };
+ struct iwl_scan_cmd *scan;
+ struct ieee80211_conf *conf = NULL;
+ int ret = 0;
+ u32 tx_ant;
+ u16 cmd_len;
+ enum ieee80211_band band;
+ u8 direct_mask;
+ u8 rx_chain = 0x7; /* bitmap: ABC chains */
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ mutex_lock(&priv->mutex);
+
+ if (!iwl_is_ready(priv)) {
+ IWL_WARNING("request scan called when driver not ready.\n");
+ goto done;
+ }
+
+ /* Make sure the scan wasn't cancelled before this queued work
+ * was given the chance to run... */
+ if (!test_bit(STATUS_SCANNING, &priv->status))
+ goto done;
+
+ /* This should never be called or scheduled if there is currently
+ * a scan active in the hardware. */
+ if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
+ "Ignoring second request.\n");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
+ goto done;
+ }
+
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+ goto done;
+ }
+
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
+ goto done;
+ }
+
+ if (!priv->scan_bands) {
+ IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
+ goto done;
+ }
+
+ if (!priv->scan) {
+ priv->scan = kmalloc(sizeof(struct iwl_scan_cmd) +
+ IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!priv->scan) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ }
+ scan = priv->scan;
+ memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+ if (iwl_is_associated(priv)) {
+ u16 interval = 0;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+ unsigned long flags;
+
+ IWL_DEBUG_INFO("Scanning while associated...\n");
+
+ spin_lock_irqsave(&priv->lock, flags);
+ interval = priv->beacon_int;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ /* We should add the ability for user to lock to PASSIVE ONLY */
+ if (priv->one_direct_scan) {
+ IWL_DEBUG_SCAN("Start direct scan for '%s'\n",
+ iwl_escape_essid(priv->direct_ssid,
+ priv->direct_ssid_len));
+ scan->direct_scan[0].id = WLAN_EID_SSID;
+ scan->direct_scan[0].len = priv->direct_ssid_len;
+ memcpy(scan->direct_scan[0].ssid,
+ priv->direct_ssid, priv->direct_ssid_len);
+ direct_mask = 1;
+ } else if (!iwl_is_associated(priv) && priv->essid_len) {
+ IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n",
+ iwl_escape_essid(priv->essid, priv->essid_len));
+ scan->direct_scan[0].id = WLAN_EID_SSID;
+ scan->direct_scan[0].len = priv->essid_len;
+ memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
+ direct_mask = 1;
+ } else {
+ IWL_DEBUG_SCAN("Start indirect scan.\n");
+ direct_mask = 0;
+ }
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+
- break;
-
- case 1:
++ if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
+ band = IEEE80211_BAND_2GHZ;
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ tx_ant = iwl_scan_tx_ant(priv, band);
+ if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK)
+ scan->tx_cmd.rate_n_flags =
+ iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
+ tx_ant);
+ else
+ scan->tx_cmd.rate_n_flags =
+ iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
+ tx_ant |
+ RATE_MCS_CCK_MSK);
+ scan->good_CRC_th = 0;
-
- break;
- default:
++ } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
+ band = IEEE80211_BAND_5GHZ;
+ tx_ant = iwl_scan_tx_ant(priv, band);
+ scan->tx_cmd.rate_n_flags =
+ iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
+ tx_ant);
+ scan->good_CRC_th = IWL_GOOD_CRC_TH;
+
+ /* Force use of chains B and C (0x6) for scan Rx for 4965
+ * Avoid A (0x1) because of its off-channel reception on A-band.
+ * MIMO is not used here, but value is required */
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+ rx_chain = 0x6;
++ } else {
+ IWL_WARNING("Invalid scan band count\n");
+ goto done;
+ }
+
+ scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
+ cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
+ (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
+ (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
+
+ cmd_len = iwl_fill_probe_req(priv, band,
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
+ scan->filter_flags = RXON_FILTER_PROMISC_MSK;
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
+ if (direct_mask)
+ scan->channel_count =
+ iwl_get_channels_for_scan(priv, band, 1, /* active */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ else
+ scan->channel_count =
+ iwl_get_channels_for_scan(priv, band, 0, /* passive */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count);
+ goto done;
+ }
+
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct iwl_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &priv->status);
+ ret = iwl_send_cmd_sync(priv, &cmd);
+ if (ret)
+ goto done;
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IWL_SCAN_CHECK_WATCHDOG);
+
+ mutex_unlock(&priv->mutex);
+ return;
+
+ done:
+ /* inform mac80211 scan aborted */
+ queue_work(priv->workqueue, &priv->scan_completed);
+ mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_abort_scan(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ mutex_lock(&priv->mutex);
+
+ set_bit(STATUS_SCAN_ABORTING, &priv->status);
+ iwl_send_scan_abort(priv);
+
+ mutex_unlock(&priv->mutex);
+}
+
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
+{
+ /* FIXME: move here when resolved PENDING
+ * INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); */
+ INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
+ INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+}
+EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
+
projects / linux-2.6 / commitdiff