#
# Common support
-obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o
+obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o
obj-m :=
obj-n :=
obj- :=
/*
* linux/arch/arm/plat-omap/clock.c
*
- * Copyright (C) 2004 Nokia corporation
+ * Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/config.h>
#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
-#include <asm/arch/board.h>
-#include <asm/arch/usb.h>
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
-static LIST_HEAD(clocks);
+LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
-static DEFINE_SPINLOCK(clockfw_lock);
-static void propagate_rate(struct clk * clk);
-/* UART clock function */
-static int set_uart_rate(struct clk * clk, unsigned long rate);
-/* External clock (MCLK & BCLK) functions */
-static int set_ext_clk_rate(struct clk * clk, unsigned long rate);
-static long round_ext_clk_rate(struct clk * clk, unsigned long rate);
-static void init_ext_clk(struct clk * clk);
-/* MPU virtual clock functions */
-static int select_table_rate(struct clk * clk, unsigned long rate);
-static long round_to_table_rate(struct clk * clk, unsigned long rate);
-void clk_setdpll(__u16, __u16);
-
-static struct mpu_rate rate_table[] = {
- /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
- * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
- */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
- { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
- { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
- { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
- { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
- { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
- { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */
- { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
- { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
- { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
- { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
- { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
- { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
- { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
- { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
- { 0, 0, 0, 0, 0 },
-};
-
-
-static void ckctl_recalc(struct clk * clk);
-int __clk_enable(struct clk *clk);
-void __clk_disable(struct clk *clk);
-void __clk_unuse(struct clk *clk);
-int __clk_use(struct clk *clk);
-
-
-static void followparent_recalc(struct clk * clk)
-{
- clk->rate = clk->parent->rate;
-}
-
-
-static void watchdog_recalc(struct clk * clk)
-{
- clk->rate = clk->parent->rate / 14;
-}
-
-static void uart_recalc(struct clk * clk)
-{
- unsigned int val = omap_readl(clk->enable_reg);
- if (val & clk->enable_bit)
- clk->rate = 48000000;
- else
- clk->rate = 12000000;
-}
-
-static struct clk ck_ref = {
- .name = "ck_ref",
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1 = {
- .name = "ck_dpll1",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_PROPAGATES | ALWAYS_ENABLED,
-};
-
-static struct clk ck_dpll1out = {
- .name = "ck_dpll1out",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_CKOUT_ARM,
- .recalc = &followparent_recalc,
-};
-
-static struct clk arm_ck = {
- .name = "arm_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
- .rate_offset = CKCTL_ARMDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk armper_ck = {
- .name = "armper_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_PERCK,
- .rate_offset = CKCTL_PERDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk arm_gpio_ck = {
- .name = "arm_gpio_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_GPIOCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk armxor_ck = {
- .name = "armxor_ck",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_XORPCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk armtim_ck = {
- .name = "armtim_ck",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_TIMCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk armwdt_ck = {
- .name = "armwdt_ck",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_WDTCK,
- .recalc = &watchdog_recalc,
-};
-
-static struct clk arminth_ck16xx = {
- .name = "arminth_ck",
- .parent = &arm_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
- /* Note: On 16xx the frequency can be divided by 2 by programming
- * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
- *
- * 1510 version is in TC clocks.
- */
-};
-
-static struct clk dsp_ck = {
- .name = "dsp_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL,
- .enable_reg = ARM_CKCTL,
- .enable_bit = EN_DSPCK,
- .rate_offset = CKCTL_DSPDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk dspmmu_ck = {
- .name = "dspmmu_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | ALWAYS_ENABLED,
- .rate_offset = CKCTL_DSPMMUDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk dspper_ck = {
- .name = "dspper_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
- .enable_reg = DSP_IDLECT2,
- .enable_bit = EN_PERCK,
- .rate_offset = CKCTL_PERDIV_OFFSET,
- .recalc = &followparent_recalc,
- //.recalc = &ckctl_recalc,
-};
-
-static struct clk dspxor_ck = {
- .name = "dspxor_ck",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
- .enable_reg = DSP_IDLECT2,
- .enable_bit = EN_XORPCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
- .name = "dsptim_ck",
- .parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
- .enable_reg = DSP_IDLECT2,
- .enable_bit = EN_DSPTIMCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk tc_ck = {
- .name = "tc_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
- RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
- .rate_offset = CKCTL_TCDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk arminth_ck1510 = {
- .name = "arminth_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
- /* Note: On 1510 the frequency follows TC_CK
- *
- * 16xx version is in MPU clocks.
- */
-};
-
-static struct clk tipb_ck = {
- .name = "tibp_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
- .name = "l3_ocpi_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT3,
- .enable_bit = EN_OCPI_CK,
- .recalc = &followparent_recalc,
-};
+DEFINE_SPINLOCK(clockfw_lock);
-static struct clk tc1_ck = {
- .name = "tc1_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT3,
- .enable_bit = EN_TC1_CK,
- .recalc = &followparent_recalc,
-};
+static struct clk_functions *arch_clock;
-static struct clk tc2_ck = {
- .name = "tc2_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT3,
- .enable_bit = EN_TC2_CK,
- .recalc = &followparent_recalc,
-};
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
-static struct clk dma_ck = {
- .name = "dma_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
- .name = "dma_lcdfree_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk api_ck = {
- .name = "api_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_APICK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk lb_ck = {
- .name = "lb_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP1510,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_LBCK,
- .recalc = &followparent_recalc,
-};
-
-static struct clk rhea1_ck = {
- .name = "rhea1_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
- .name = "rhea2_ck",
- .parent = &tc_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
- .recalc = &followparent_recalc,
-};
-
-static struct clk lcd_ck = {
- .name = "lcd_ck",
- .parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 |
- RATE_CKCTL,
- .enable_reg = ARM_IDLECT2,
- .enable_bit = EN_LCDCK,
- .rate_offset = CKCTL_LCDDIV_OFFSET,
- .recalc = &ckctl_recalc,
-};
-
-static struct clk uart1_1510 = {
- .name = "uart1_ck",
- /* Direct from ULPD, no parent */
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 29, /* Chooses between 12MHz and 48MHz */
- .set_rate = &set_uart_rate,
- .recalc = &uart_recalc,
-};
-
-static struct clk uart1_16xx = {
- .name = "uart1_ck",
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 29,
-};
-
-static struct clk uart2_ck = {
- .name = "uart2_ck",
- /* Direct from ULPD, no parent */
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT |
- ALWAYS_ENABLED,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 30, /* Chooses between 12MHz and 48MHz */
- .set_rate = &set_uart_rate,
- .recalc = &uart_recalc,
-};
-
-static struct clk uart3_1510 = {
- .name = "uart3_ck",
- /* Direct from ULPD, no parent */
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 31, /* Chooses between 12MHz and 48MHz */
- .set_rate = &set_uart_rate,
- .recalc = &uart_recalc,
-};
-
-static struct clk uart3_16xx = {
- .name = "uart3_ck",
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 31,
-};
-
-static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
- .name = "usb_clko",
- /* Direct from ULPD, no parent */
- .rate = 6000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = ULPD_CLOCK_CTRL,
- .enable_bit = USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
- .name = "usb_hhc_ck",
- /* Direct from ULPD, no parent */
- .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
- .flags = CLOCK_IN_OMAP1510 |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
- .name = "usb_hhc_ck",
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
- .enable_bit = 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
- .name = "usb_dc_ck",
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
- .enable_reg = SOFT_REQ_REG,
- .enable_bit = 4,
-};
-
-static struct clk mclk_1510 = {
- .name = "mclk",
- /* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk mclk_16xx = {
- .name = "mclk",
- /* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = COM_CLK_DIV_CTRL_SEL,
- .enable_bit = COM_ULPD_PLL_CLK_REQ,
- .set_rate = &set_ext_clk_rate,
- .round_rate = &round_ext_clk_rate,
- .init = &init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
- .name = "bclk",
- /* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
- .name = "bclk",
- /* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = SWD_CLK_DIV_CTRL_SEL,
- .enable_bit = SWD_ULPD_PLL_CLK_REQ,
- .set_rate = &set_ext_clk_rate,
- .round_rate = &round_ext_clk_rate,
- .init = &init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
- .name = "mmc1_ck",
- /* Functional clock is direct from ULPD, interface clock is ARMPER */
- .parent = &armper_ck,
- .rate = 48000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 23,
-};
-
-static struct clk mmc2_ck = {
- .name = "mmc2_ck",
- /* Functional clock is direct from ULPD, interface clock is ARMPER */
- .parent = &armper_ck,
- .rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = MOD_CONF_CTRL_0,
- .enable_bit = 20,
-};
-
-static struct clk virtual_ck_mpu = {
- .name = "mpu",
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_CLOCK | ALWAYS_ENABLED,
- .parent = &arm_ck, /* Is smarter alias for */
- .recalc = &followparent_recalc,
- .set_rate = &select_table_rate,
- .round_rate = &round_to_table_rate,
-};
-
-
-static struct clk * onchip_clks[] = {
- /* non-ULPD clocks */
- &ck_ref,
- &ck_dpll1,
- /* CK_GEN1 clocks */
- &ck_dpll1out,
- &arm_ck,
- &armper_ck,
- &arm_gpio_ck,
- &armxor_ck,
- &armtim_ck,
- &armwdt_ck,
- &arminth_ck1510, &arminth_ck16xx,
- /* CK_GEN2 clocks */
- &dsp_ck,
- &dspmmu_ck,
- &dspper_ck,
- &dspxor_ck,
- &dsptim_ck,
- /* CK_GEN3 clocks */
- &tc_ck,
- &tipb_ck,
- &l3_ocpi_ck,
- &tc1_ck,
- &tc2_ck,
- &dma_ck,
- &dma_lcdfree_ck,
- &api_ck,
- &lb_ck,
- &rhea1_ck,
- &rhea2_ck,
- &lcd_ck,
- /* ULPD clocks */
- &uart1_1510,
- &uart1_16xx,
- &uart2_ck,
- &uart3_1510,
- &uart3_16xx,
- &usb_clko,
- &usb_hhc_ck1510, &usb_hhc_ck16xx,
- &usb_dc_ck,
- &mclk_1510, &mclk_16xx,
- &bclk_1510, &bclk_16xx,
- &mmc1_ck,
- &mmc2_ck,
- /* Virtual clocks */
- &virtual_ck_mpu,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
+struct clk * clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-
-int __clk_enable(struct clk *clk)
-{
- __u16 regval16;
- __u32 regval32;
-
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- if (unlikely(clk->enable_reg == 0)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0;
- }
-
- if (clk->flags & DSP_DOMAIN_CLOCK) {
- __clk_use(&api_ck);
- }
-
- if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
- } else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
- }
-
- if (clk->flags & DSP_DOMAIN_CLOCK) {
- __clk_unuse(&api_ck);
- }
-
- return 0;
-}
-
-
-void __clk_disable(struct clk *clk)
-{
- __u16 regval16;
- __u32 regval32;
-
- if (clk->enable_reg == 0)
- return;
-
- if (clk->flags & DSP_DOMAIN_CLOCK) {
- __clk_use(&api_ck);
- }
-
- if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
- } else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
- }
-
- if (clk->flags & DSP_DOMAIN_CLOCK) {
- __clk_unuse(&api_ck);
- }
-}
-
-
-void __clk_unuse(struct clk *clk)
-{
- if (clk->usecount > 0 && !(--clk->usecount)) {
- __clk_disable(clk);
- if (likely(clk->parent))
- __clk_unuse(clk->parent);
- }
-}
-
-
-int __clk_use(struct clk *clk)
-{
- int ret = 0;
- if (clk->usecount++ == 0) {
- if (likely(clk->parent))
- ret = __clk_use(clk->parent);
-
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
-
- ret = __clk_enable(clk);
-
- if (unlikely(ret != 0) && clk->parent) {
- __clk_unuse(clk->parent);
- clk->usecount--;
- }
- }
-
- return ret;
-}
-
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret;
+ int ret = 0;
spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
+ if (clk->enable)
+ ret = clk->enable(clk);
+ else if (arch_clock->clk_enable)
+ ret = arch_clock->clk_enable(clk);
+ else
+ printk(KERN_ERR "Could not enable clock %s\n", clk->name);
spin_unlock_irqrestore(&clockfw_lock, flags);
+
return ret;
}
EXPORT_SYMBOL(clk_enable);
-
void clk_disable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
+ if (clk->disable)
+ clk->disable(clk);
+ else if (arch_clock->clk_disable)
+ arch_clock->clk_disable(clk);
+ else
+ printk(KERN_ERR "Could not disable clock %s\n", clk->name);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
-
int clk_use(struct clk *clk)
{
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_use(clk);
+ if (arch_clock->clk_use)
+ ret = arch_clock->clk_use(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
+
return ret;
}
EXPORT_SYMBOL(clk_use);
-
void clk_unuse(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clockfw_lock, flags);
- __clk_unuse(clk);
+ if (arch_clock->clk_unuse)
+ arch_clock->clk_unuse(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_unuse);
-
int clk_get_usecount(struct clk *clk)
{
- return clk->usecount;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-
-static __u16 verify_ckctl_value(__u16 newval)
-{
- /* This function checks for following limitations set
- * by the hardware (all conditions must be true):
- * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2
- * ARM_CK >= TC_CK
- * DSP_CK >= TC_CK
- * DSPMMU_CK >= TC_CK
- *
- * In addition following rules are enforced:
- * LCD_CK <= TC_CK
- * ARMPER_CK <= TC_CK
- *
- * However, maximum frequencies are not checked for!
- */
- __u8 per_exp;
- __u8 lcd_exp;
- __u8 arm_exp;
- __u8 dsp_exp;
- __u8 tc_exp;
- __u8 dspmmu_exp;
-
- per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
- lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
- arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
- dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
- tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
- dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
-
- if (dspmmu_exp < dsp_exp)
- dspmmu_exp = dsp_exp;
- if (dspmmu_exp > dsp_exp+1)
- dspmmu_exp = dsp_exp+1;
- if (tc_exp < arm_exp)
- tc_exp = arm_exp;
- if (tc_exp < dspmmu_exp)
- tc_exp = dspmmu_exp;
- if (tc_exp > lcd_exp)
- lcd_exp = tc_exp;
- if (tc_exp > per_exp)
- per_exp = tc_exp;
+ unsigned long flags;
+ int ret = 0;
- newval &= 0xf000;
- newval |= per_exp << CKCTL_PERDIV_OFFSET;
- newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
- newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
- newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
- newval |= tc_exp << CKCTL_TCDIV_OFFSET;
- newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->usecount;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return newval;
+ return ret;
}
+EXPORT_SYMBOL(clk_get_usecount);
-
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+unsigned long clk_get_rate(struct clk *clk)
{
- /* Note: If target frequency is too low, this function will return 4,
- * which is invalid value. Caller must check for this value and act
- * accordingly.
- *
- * Note: This function does not check for following limitations set
- * by the hardware (all conditions must be true):
- * DSPMMU_CK == DSP_CK or DSPMMU_CK == DSP_CK/2
- * ARM_CK >= TC_CK
- * DSP_CK >= TC_CK
- * DSPMMU_CK >= TC_CK
- */
- unsigned long realrate;
- struct clk * parent;
- unsigned dsor_exp;
-
- if (unlikely(!(clk->flags & RATE_CKCTL)))
- return -EINVAL;
-
- parent = clk->parent;
- if (unlikely(parent == 0))
- return -EIO;
-
- realrate = parent->rate;
- for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
- if (realrate <= rate)
- break;
+ unsigned long flags;
+ unsigned long ret = 0;
- realrate /= 2;
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return dsor_exp;
+ return ret;
}
+EXPORT_SYMBOL(clk_get_rate);
-
-static void ckctl_recalc(struct clk * clk)
+void clk_put(struct clk *clk)
{
- int dsor;
-
- /* Calculate divisor encoded as 2-bit exponent */
- if (clk->flags & DSP_DOMAIN_CLOCK) {
- /* The clock control bits are in DSP domain,
- * so api_ck is needed for access.
- * Note that DSP_CKCTL virt addr = phys addr, so
- * we must use __raw_readw() instead of omap_readw().
- */
- __clk_use(&api_ck);
- dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
- __clk_unuse(&api_ck);
- } else {
- dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
- }
- if (unlikely(clk->rate == clk->parent->rate / dsor))
- return; /* No change, quick exit */
- clk->rate = clk->parent->rate / dsor;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
}
+EXPORT_SYMBOL(clk_put);
+/*-------------------------------------------------------------------------
+ * Optional clock functions defined in asm/hardware/clock.h
+ *-------------------------------------------------------------------------*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- int dsor_exp;
-
- if (clk->flags & RATE_FIXED)
- return clk->rate;
-
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp < 0)
- return dsor_exp;
- if (dsor_exp > 3)
- dsor_exp = 3;
- return clk->parent->rate / (1 << dsor_exp);
- }
+ unsigned long flags;
+ long ret = 0;
- if(clk->round_rate != 0)
- return clk->round_rate(clk, rate);
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_round_rate)
+ ret = arch_clock->clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return clk->rate;
+ return ret;
}
EXPORT_SYMBOL(clk_round_rate);
-
-static void propagate_rate(struct clk * clk)
-{
- struct clk ** clkp;
-
- for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
- if (likely((*clkp)->parent != clk)) continue;
- if (likely((*clkp)->recalc))
- (*clkp)->recalc(*clkp);
- }
-}
-
-
-static int select_table_rate(struct clk * clk, unsigned long rate)
+int clk_set_rate(struct clk *clk, unsigned long rate)
{
- /* Find the highest supported frequency <= rate and switch to it */
- struct mpu_rate * ptr;
-
- if (clk != &virtual_ck_mpu)
- return -EINVAL;
-
- for (ptr = rate_table; ptr->rate; ptr++) {
- if (ptr->xtal != ck_ref.rate)
- continue;
-
- /* DPLL1 cannot be reprogrammed without risking system crash */
- if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
- continue;
-
- /* Can check only after xtal frequency check */
- if (ptr->rate <= rate)
- break;
- }
-
- if (!ptr->rate)
- return -EINVAL;
+ unsigned long flags;
+ int ret = 0;
- /*
- * In most cases we should not need to reprogram DPLL.
- * Reprogramming the DPLL is tricky, it must be done from SRAM.
- */
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_set_rate)
+ ret = arch_clock->clk_set_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- ck_dpll1.rate = ptr->pll_rate;
- propagate_rate(&ck_dpll1);
- return 0;
+ return ret;
}
+EXPORT_SYMBOL(clk_set_rate);
-
-static long round_to_table_rate(struct clk * clk, unsigned long rate)
+int clk_set_parent(struct clk *clk, struct clk *parent)
{
- /* Find the highest supported frequency <= rate */
- struct mpu_rate * ptr;
- long highest_rate;
-
- if (clk != &virtual_ck_mpu)
- return -EINVAL;
-
- highest_rate = -EINVAL;
-
- for (ptr = rate_table; ptr->rate; ptr++) {
- if (ptr->xtal != ck_ref.rate)
- continue;
-
- highest_rate = ptr->rate;
+ unsigned long flags;
+ int ret = 0;
- /* Can check only after xtal frequency check */
- if (ptr->rate <= rate)
- break;
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_set_parent)
+ ret = arch_clock->clk_set_parent(clk, parent);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return highest_rate;
+ return ret;
}
+EXPORT_SYMBOL(clk_set_parent);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
+struct clk *clk_get_parent(struct clk *clk)
{
- int ret = -EINVAL;
- int dsor_exp;
- __u16 regval;
- unsigned long flags;
-
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp > 3)
- dsor_exp = -EINVAL;
- if (dsor_exp < 0)
- return dsor_exp;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- regval = omap_readw(ARM_CKCTL);
- regval &= ~(3 << clk->rate_offset);
- regval |= dsor_exp << clk->rate_offset;
- regval = verify_ckctl_value(regval);
- omap_writew(regval, ARM_CKCTL);
- clk->rate = clk->parent->rate / (1 << dsor_exp);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- ret = 0;
- } else if(clk->set_rate != 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->set_rate(clk, rate);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ unsigned long flags;
+ struct clk * ret = NULL;
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_get_parent)
+ ret = arch_clock->clk_get_parent(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
}
-EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+/*-------------------------------------------------------------------------
+ * OMAP specific clock functions shared between omap1 and omap2
+ *-------------------------------------------------------------------------*/
-static unsigned calc_ext_dsor(unsigned long rate)
-{
- unsigned dsor;
+unsigned int __initdata mpurate;
- /* MCLK and BCLK divisor selection is not linear:
- * freq = 96MHz / dsor
- *
- * RATIO_SEL range: dsor <-> RATIO_SEL
- * 0..6: (RATIO_SEL+2) <-> (dsor-2)
- * 6..48: (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
- * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
- * can not be used.
- */
- for (dsor = 2; dsor < 96; ++dsor) {
- if ((dsor & 1) && dsor > 8)
- continue;
- if (rate >= 96000000 / dsor)
- break;
- }
- return dsor;
-}
-
-/* Only needed on 1510 */
-static int set_uart_rate(struct clk * clk, unsigned long rate)
-{
- unsigned int val;
-
- val = omap_readl(clk->enable_reg);
- if (rate == 12000000)
- val &= ~(1 << clk->enable_bit);
- else if (rate == 48000000)
- val |= (1 << clk->enable_bit);
- else
- return -EINVAL;
- omap_writel(val, clk->enable_reg);
- clk->rate = rate;
-
- return 0;
-}
-
-static int set_ext_clk_rate(struct clk * clk, unsigned long rate)
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
{
- unsigned dsor;
- __u16 ratio_bits;
+ get_option(&str, &mpurate);
- dsor = calc_ext_dsor(rate);
- clk->rate = 96000000 / dsor;
- if (dsor > 8)
- ratio_bits = ((dsor - 8) / 2 + 6) << 2;
- else
- ratio_bits = (dsor - 2) << 2;
+ if (!mpurate)
+ return 1;
- ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
- omap_writew(ratio_bits, clk->enable_reg);
+ if (mpurate < 1000)
+ mpurate *= 1000000;
- return 0;
+ return 1;
}
+__setup("mpurate=", omap_clk_setup);
-
-static long round_ext_clk_rate(struct clk * clk, unsigned long rate)
+/* Used for clocks that always have same value as the parent clock */
+void followparent_recalc(struct clk *clk)
{
- return 96000000 / calc_ext_dsor(rate);
+ clk->rate = clk->parent->rate;
}
-
-static void init_ext_clk(struct clk * clk)
+/* Propagate rate to children */
+void propagate_rate(struct clk * tclk)
{
- unsigned dsor;
- __u16 ratio_bits;
+ struct clk *clkp;
- /* Determine current rate and ensure clock is based on 96MHz APLL */
- ratio_bits = omap_readw(clk->enable_reg) & ~1;
- omap_writew(ratio_bits, clk->enable_reg);
-
- ratio_bits = (ratio_bits & 0xfc) >> 2;
- if (ratio_bits > 6)
- dsor = (ratio_bits - 6) * 2 + 8;
- else
- dsor = ratio_bits + 2;
-
- clk-> rate = 96000000 / dsor;
+ list_for_each_entry(clkp, &clocks, node) {
+ if (likely(clkp->parent != tclk))
+ continue;
+ if (likely((u32)clkp->recalc))
+ clkp->recalc(clkp);
+ }
}
-
int clk_register(struct clk *clk)
{
down(&clocks_sem);
if (clk->init)
clk->init(clk);
up(&clocks_sem);
+
return 0;
}
EXPORT_SYMBOL(clk_register);
}
EXPORT_SYMBOL(clk_unregister);
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap_early_clk_reset(void)
+void clk_deny_idle(struct clk *clk)
{
- //omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_deny_idle)
+ arch_clock->clk_deny_idle(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
-#else
-#define omap_early_clk_reset() {}
-#endif
+EXPORT_SYMBOL(clk_deny_idle);
-int __init clk_init(void)
+void clk_allow_idle(struct clk *clk)
{
- struct clk ** clkp;
- const struct omap_clock_config *info;
- int crystal_type = 0; /* Default 12 MHz */
-
- omap_early_clk_reset();
-
- for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
- if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
- clk_register(*clkp);
- continue;
- }
-
- if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
- clk_register(*clkp);
- continue;
- }
-
- if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
- clk_register(*clkp);
- continue;
- }
- }
-
- info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
- if (info != NULL) {
- if (!cpu_is_omap1510())
- crystal_type = info->system_clock_type;
- }
-
-#if defined(CONFIG_ARCH_OMAP730)
- ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
- if (crystal_type == 2)
- ck_ref.rate = 19200000;
-#endif
-
- printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
- omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
- omap_readw(ARM_CKCTL));
-
- /* We want to be in syncronous scalable mode */
- omap_writew(0x1000, ARM_SYSST);
-
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
- /* Use values set by bootloader. Determine PLL rate and recalculate
- * dependent clocks as if kernel had changed PLL or divisors.
- */
- {
- unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
- ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
- if (pll_ctl_val & 0x10) {
- /* PLL enabled, apply multiplier and divisor */
- if (pll_ctl_val & 0xf80)
- ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
- ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
- } else {
- /* PLL disabled, apply bypass divisor */
- switch (pll_ctl_val & 0xc) {
- case 0:
- break;
- case 0x4:
- ck_dpll1.rate /= 2;
- break;
- default:
- ck_dpll1.rate /= 4;
- break;
- }
- }
- }
- propagate_rate(&ck_dpll1);
-#else
- /* Find the highest supported frequency and enable it */
- if (select_table_rate(&virtual_ck_mpu, ~0)) {
- printk(KERN_ERR "System frequencies not set. Check your config.\n");
- /* Guess sane values (60MHz) */
- omap_writew(0x2290, DPLL_CTL);
- omap_writew(0x1005, ARM_CKCTL);
- ck_dpll1.rate = 60000000;
- propagate_rate(&ck_dpll1);
- }
-#endif
- /* Cache rates for clocks connected to ck_ref (not dpll1) */
- propagate_rate(&ck_ref);
- printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
- "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
- ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
- ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
- arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
- /* Select slicer output as OMAP input clock */
- omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
-#endif
-
- /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
- omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
- /* Put DSP/MPUI into reset until needed */
- omap_writew(0, ARM_RSTCT1);
- omap_writew(1, ARM_RSTCT2);
- omap_writew(0x400, ARM_IDLECT1);
-
- /*
- * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
- * of the ARM_IDLECT2 register must be set to zero. The power-on
- * default value of this bit is one.
- */
- omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
-
- /*
- * Only enable those clocks we will need, let the drivers
- * enable other clocks as necessary
- */
- clk_use(&armper_ck);
- clk_use(&armxor_ck);
- clk_use(&armtim_ck);
-
- if (cpu_is_omap1510())
- clk_enable(&arm_gpio_ck);
+ unsigned long flags;
- return 0;
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_allow_idle)
+ arch_clock->clk_allow_idle(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
+EXPORT_SYMBOL(clk_allow_idle);
+/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-
-static int __init omap_late_clk_reset(void)
+int __init clk_init(struct clk_functions * custom_clocks)
{
- /* Turn off all unused clocks */
- struct clk *p;
- __u32 regval32;
-
- /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
- regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
- omap_writew(regval32, SOFT_REQ_REG);
- omap_writew(0, SOFT_REQ_REG2);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
- p->enable_reg == 0)
- continue;
-
- /* Assume no DSP clocks have been activated by bootloader */
- if (p->flags & DSP_DOMAIN_CLOCK)
- continue;
-
- /* Is the clock already disabled? */
- if (p->flags & ENABLE_REG_32BIT) {
- if (p->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readl(p->enable_reg);
- else
- regval32 = omap_readl(p->enable_reg);
- } else {
- if (p->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readw(p->enable_reg);
- else
- regval32 = omap_readw(p->enable_reg);
- }
-
- if ((regval32 & (1 << p->enable_bit)) == 0)
- continue;
-
- /* FIXME: This clock seems to be necessary but no-one
- * has asked for its activation. */
- if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera
- || p == &ck_dpll1out // FIX: SoSSI, SSR
- || p == &arm_gpio_ck // FIX: GPIO code for 1510
- ) {
- printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
- p->name);
- continue;
- }
-
- printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
- __clk_disable(p);
- printk(" done\n");
+ if (!custom_clocks) {
+ printk(KERN_ERR "No custom clock functions registered\n");
+ BUG();
}
+ arch_clock = custom_clocks;
+
return 0;
}
-
-late_initcall(omap_late_clk_reset);
-
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/clock.h
- *
- * Copyright (C) 2004 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-
-struct clk {
- struct list_head node;
- struct module *owner;
- const char *name;
- struct clk *parent;
- unsigned long rate;
- __s8 usecount;
- __u16 flags;
- __u32 enable_reg;
- __u8 enable_bit;
- __u8 rate_offset;
- void (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
-};
-
-
-struct mpu_rate {
- unsigned long rate;
- unsigned long xtal;
- unsigned long pll_rate;
- __u16 ckctl_val;
- __u16 dpllctl_val;
-};
-
-
-/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
-#define CLOCK_IN_OMAP16XX 64
-#define CLOCK_IN_OMAP1510 128
-#define CLOCK_IN_OMAP730 256
-#define DSP_DOMAIN_CLOCK 512
-#define VIRTUAL_IO_ADDRESS 1024
-
-/* ARM_CKCTL bit shifts */
-#define CKCTL_PERDIV_OFFSET 0
-#define CKCTL_LCDDIV_OFFSET 2
-#define CKCTL_ARMDIV_OFFSET 4
-#define CKCTL_DSPDIV_OFFSET 6
-#define CKCTL_TCDIV_OFFSET 8
-#define CKCTL_DSPMMUDIV_OFFSET 10
-/*#define ARM_TIMXO 12*/
-#define EN_DSPCK 13
-/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */
-/* DSP_CKCTL bit shifts */
-#define CKCTL_DSPPERDIV_OFFSET 0
-
-/* ARM_IDLECT1 bit shifts */
-/*#define IDLWDT_ARM 0*/
-/*#define IDLXORP_ARM 1*/
-/*#define IDLPER_ARM 2*/
-/*#define IDLLCD_ARM 3*/
-/*#define IDLLB_ARM 4*/
-/*#define IDLHSAB_ARM 5*/
-/*#define IDLIF_ARM 6*/
-/*#define IDLDPLL_ARM 7*/
-/*#define IDLAPI_ARM 8*/
-/*#define IDLTIM_ARM 9*/
-/*#define SETARM_IDLE 11*/
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK 0
-#define EN_XORPCK 1
-#define EN_PERCK 2
-#define EN_LCDCK 3
-#define EN_LBCK 4 /* Not on 1610/1710 */
-/*#define EN_HSABCK 5*/
-#define EN_APICK 6
-#define EN_TIMCK 7
-#define DMACK_REQ 8
-#define EN_GPIOCK 9 /* Not on 1610/1710 */
-/*#define EN_LBFREECK 10*/
-#define EN_CKOUT_ARM 11
-
-/* ARM_IDLECT3 bit shifts */
-#define EN_OCPI_CK 0
-#define EN_TC1_CK 2
-#define EN_TC2_CK 4
-
-/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
-#define EN_DSPTIMCK 5
-
-/* Various register defines for clock controls scattered around OMAP chip */
-#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */
-#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */
-#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */
-#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */
-#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874
-#define COM_CLK_DIV_CTRL_SEL 0xfffe0878
-#define SOFT_REQ_REG 0xfffe0834
-#define SOFT_REQ_REG2 0xfffe0880
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-int clk_init(void);
-
-#endif
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
-#include "clock.h"
+#include <asm/arch/clock.h>
#define NO_LENGTH_CHECK 0xffffffff
static int __init omap_add_serial_console(void)
{
- const struct omap_serial_console_config *info;
-
- info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
- struct omap_serial_console_config);
- if (info != NULL && info->console_uart) {
- static char speed[11], *opt = NULL;
+ const struct omap_serial_console_config *con_info;
+ const struct omap_uart_config *uart_info;
+ static char speed[11], *opt = NULL;
+ int line, i, uart_idx;
+
+ uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+ con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
+ struct omap_serial_console_config);
+ if (uart_info == NULL || con_info == NULL)
+ return 0;
+
+ if (con_info->console_uart == 0)
+ return 0;
+
+ if (con_info->console_speed) {
+ snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
+ opt = speed;
+ }
- if (info->console_speed) {
- snprintf(speed, sizeof(speed), "%u", info->console_speed);
- opt = speed;
- }
- return add_preferred_console("ttyS", info->console_uart - 1, opt);
+ uart_idx = con_info->console_uart - 1;
+ if (uart_idx >= OMAP_MAX_NR_PORTS) {
+ printk(KERN_INFO "Console: external UART#%d. "
+ "Not adding it as console this time.\n",
+ uart_idx + 1);
+ return 0;
+ }
+ if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
+ printk(KERN_ERR "Console: Selected UART#%d is "
+ "not enabled for this platform\n",
+ uart_idx + 1);
+ return -1;
+ }
+ line = 0;
+ for (i = 0; i < uart_idx; i++) {
+ if (uart_info->enabled_uarts & (1 << i))
+ line++;
}
- return 0;
+ return add_preferred_console("ttyS", line, opt);
}
console_initcall(omap_add_serial_console);
--- /dev/null
+/*
+ * linux/arch/arm/plat-omap/devices.c
+ *
+ * Common platform device setup/initialization for OMAP1 and OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+
+void omap_nop_release(struct device *dev)
+{
+ /* Nothing */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+
+#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP2_I2C_BASE1 0x48070000
+#define OMAP_I2C_SIZE 0x3f
+#define OMAP1_I2C_INT INT_I2C
+#define OMAP2_I2C_INT1 56
+
+static struct resource i2c_resources1[] = {
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* DMA not used; works around erratum writing to non-empty i2c fifo */
+
+static struct platform_device omap_i2c_device1 = {
+ .name = "i2c_omap",
+ .id = 1,
+ .dev = {
+ .release = omap_nop_release,
+ },
+ .num_resources = ARRAY_SIZE(i2c_resources1),
+ .resource = i2c_resources1,
+};
+
+/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
+static void omap_init_i2c(void)
+{
+ if (cpu_is_omap24xx()) {
+ i2c_resources1[0].start = OMAP2_I2C_BASE1;
+ i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
+ i2c_resources1[1].start = OMAP2_I2C_INT1;
+ } else {
+ i2c_resources1[0].start = OMAP1_I2C_BASE;
+ i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
+ i2c_resources1[1].start = OMAP1_I2C_INT;
+ }
+
+ /* FIXME define and use a boot tag, in case of boards that
+ * either don't wire up I2C, or chips that mux it differently...
+ * it can include clocking and address info, maybe more.
+ */
+ if (cpu_is_omap24xx()) {
+ omap_cfg_reg(M19_24XX_I2C1_SCL);
+ omap_cfg_reg(L15_24XX_I2C1_SDA);
+ } else {
+ omap_cfg_reg(I2C_SCL);
+ omap_cfg_reg(I2C_SDA);
+ }
+
+ (void) platform_device_register(&omap_i2c_device1);
+}
+
+#else
+static inline void omap_init_i2c(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define OMAP_MMC1_BASE 0x4809c000
+#define OMAP_MMC1_INT 83
+#else
+#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_INT INT_MMC
+#endif
+#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+
+static struct omap_mmc_conf mmc1_conf;
+
+static u64 mmc1_dmamask = 0xffffffff;
+
+static struct resource mmc1_resources[] = {
+ {
+ .start = IO_ADDRESS(OMAP_MMC1_BASE),
+ .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP_MMC1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mmc_omap_device1 = {
+ .name = "mmci-omap",
+ .id = 1,
+ .dev = {
+ .release = omap_nop_release,
+ .dma_mask = &mmc1_dmamask,
+ .platform_data = &mmc1_conf,
+ },
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+ .resource = mmc1_resources,
+};
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+static struct omap_mmc_conf mmc2_conf;
+
+static u64 mmc2_dmamask = 0xffffffff;
+
+static struct resource mmc2_resources[] = {
+ {
+ .start = IO_ADDRESS(OMAP_MMC2_BASE),
+ .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_1610_MMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mmc_omap_device2 = {
+ .name = "mmci-omap",
+ .id = 2,
+ .dev = {
+ .release = omap_nop_release,
+ .dma_mask = &mmc2_dmamask,
+ .platform_data = &mmc2_conf,
+ },
+ .num_resources = ARRAY_SIZE(mmc2_resources),
+ .resource = mmc2_resources,
+};
+#endif
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+ const struct omap_mmc_conf *mmc;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ /* block 1 is always available and has just one pinout option */
+ mmc = &mmc_conf->mmc[0];
+ if (mmc->enabled) {
+ if (!cpu_is_omap24xx()) {
+ omap_cfg_reg(MMC_CMD);
+ omap_cfg_reg(MMC_CLK);
+ omap_cfg_reg(MMC_DAT0);
+ if (cpu_is_omap1710()) {
+ omap_cfg_reg(M15_1710_MMC_CLKI);
+ omap_cfg_reg(P19_1710_MMC_CMDDIR);
+ omap_cfg_reg(P20_1710_MMC_DATDIR0);
+ }
+ }
+ if (mmc->wire4) {
+ if (!cpu_is_omap24xx()) {
+ omap_cfg_reg(MMC_DAT1);
+ /* NOTE: DAT2 can be on W10 (here) or M15 */
+ if (!mmc->nomux)
+ omap_cfg_reg(MMC_DAT2);
+ omap_cfg_reg(MMC_DAT3);
+ }
+ }
+ mmc1_conf = *mmc;
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#ifdef CONFIG_ARCH_OMAP16XX
+ /* block 2 is on newer chips, and has many pinout options */
+ mmc = &mmc_conf->mmc[1];
+ if (mmc->enabled) {
+ if (!mmc->nomux) {
+ omap_cfg_reg(Y8_1610_MMC2_CMD);
+ omap_cfg_reg(Y10_1610_MMC2_CLK);
+ omap_cfg_reg(R18_1610_MMC2_CLKIN);
+ omap_cfg_reg(W8_1610_MMC2_DAT0);
+ if (mmc->wire4) {
+ omap_cfg_reg(V8_1610_MMC2_DAT1);
+ omap_cfg_reg(W15_1610_MMC2_DAT2);
+ omap_cfg_reg(R10_1610_MMC2_DAT3);
+ }
+
+ /* These are needed for the level shifter */
+ omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+ omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+ omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+ }
+
+ /* Feedback clock must be set on OMAP-1710 MMC2 */
+ if (cpu_is_omap1710())
+ omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+ MOD_CONF_CTRL_1);
+ mmc2_conf = *mmc;
+ (void) platform_device_register(&mmc_omap_device2);
+ }
+#endif
+ return;
+}
+#else
+static inline void omap_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define OMAP_WDT_BASE 0x48022000
+#else
+#define OMAP_WDT_BASE 0xfffeb000
+#endif
+
+static struct resource wdt_resources[] = {
+ {
+ .start = OMAP_WDT_BASE,
+ .end = OMAP_WDT_BASE + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_wdt_device = {
+ .name = "omap_wdt",
+ .id = -1,
+ .dev = {
+ .release = omap_nop_release,
+ },
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+static void omap_init_wdt(void)
+{
+ (void) platform_device_register(&omap_wdt_device);
+}
+#else
+static inline void omap_init_wdt(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_OMAP_RNG) || defined(CONFIG_OMAP_RNG_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define OMAP_RNG_BASE 0x480A0000
+#else
+#define OMAP_RNG_BASE 0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+ {
+ .start = OMAP_RNG_BASE,
+ .end = OMAP_RNG_BASE + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_rng_device = {
+ .name = "omap_rng",
+ .id = -1,
+ .dev = {
+ .release = omap_nop_release,
+ },
+ .num_resources = ARRAY_SIZE(rng_resources),
+ .resource = rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+ (void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static struct omap_lcd_config omap_fb_conf;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+ .name = "omapfb",
+ .id = -1,
+ .dev = {
+ .release = omap_nop_release,
+ .dma_mask = &omap_fb_dma_mask,
+ .coherent_dma_mask = ~(u32)0,
+ .platform_data = &omap_fb_conf,
+ },
+ .num_resources = 0,
+};
+
+static inline void omap_init_fb(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL)
+ omap_fb_conf = *conf;
+ platform_device_register(&omap_fb_device);
+}
+
+#else
+
+static inline void omap_init_fb(void) {}
+
+#endif
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ * (a) Does any "standard config" pin muxing needed. Board-specific
+ * code will have muxed GPIO pins and done "nonstandard" setup;
+ * that code could live in the boot loader.
+ * (b) Populating board-specific platform_data with the data drivers
+ * rely on to handle wiring variations.
+ * (c) Creating platform devices as meaningful on this board and
+ * with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers. So is responding to probe().
+ *
+ * Board-specific knowlege like creating devices or pin setup is to be
+ * kept out of drivers as much as possible. In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap_init_devices(void)
+{
+ /* please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
+ omap_init_fb();
+ omap_init_i2c();
+ omap_init_mmc();
+ omap_init_wdt();
+ omap_init_rng();
+
+ return 0;
+}
+arch_initcall(omap_init_devices);
+
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
* by Imre Deak <imre.deak@nokia.com>
+ * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
* Support functions for the OMAP internal DMA channels.
#include <asm/arch/tc.h>
-#define OMAP_DMA_ACTIVE 0x01
+#define DEBUG_PRINTS
+#undef DEBUG_PRINTS
+#ifdef DEBUG_PRINTS
+#define debug_printk(x) printk x
+#else
+#define debug_printk(x)
+#endif
+#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
static spinlock_t dma_chan_lock;
static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
-const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+const static u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
};
+#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
+ __FUNCTION__);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+int omap_dma_in_1510_mode(void)
+{
+ return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode() 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
static inline int get_gdma_dev(int req)
{
u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
l |= (dev - 1) << shift;
omap_writel(l, reg);
}
+#else
+#define set_gdma_dev(req, dev) do {} while (0)
+#endif
static void clear_lch_regs(int lch)
{
}
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
- int frame_count, int sync_mode)
+ int frame_count, int sync_mode,
+ int dma_trigger, int src_or_dst_synch)
{
- u16 w;
+ OMAP_DMA_CSDP_REG(lch) &= ~0x03;
+ OMAP_DMA_CSDP_REG(lch) |= data_type;
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~0x03;
- w |= data_type;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ if (cpu_class_is_omap1()) {
+ OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
+ if (sync_mode == OMAP_DMA_SYNC_FRAME)
+ OMAP_DMA_CCR_REG(lch) |= 1 << 5;
+
+ OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
+ if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+ OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
+ }
+
+ if (cpu_is_omap24xx() && dma_trigger) {
+ u32 val = OMAP_DMA_CCR_REG(lch);
+
+ if (dma_trigger > 63)
+ val |= 1 << 20;
+ if (dma_trigger > 31)
+ val |= 1 << 19;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(1 << 5);
- if (sync_mode == OMAP_DMA_SYNC_FRAME)
- w |= 1 << 5;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ val |= (dma_trigger & 0x1f);
- w = omap_readw(OMAP_DMA_CCR2(lch));
- w &= ~(1 << 2);
- if (sync_mode == OMAP_DMA_SYNC_BLOCK)
- w |= 1 << 2;
- omap_writew(w, OMAP_DMA_CCR2(lch));
+ if (sync_mode & OMAP_DMA_SYNC_FRAME)
+ val |= 1 << 5;
- omap_writew(elem_count, OMAP_DMA_CEN(lch));
- omap_writew(frame_count, OMAP_DMA_CFN(lch));
+ if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+ val |= 1 << 18;
+ if (src_or_dst_synch)
+ val |= 1 << 24; /* source synch */
+ else
+ val &= ~(1 << 24); /* dest synch */
+
+ OMAP_DMA_CCR_REG(lch) = val;
+ }
+
+ OMAP_DMA_CEN_REG(lch) = elem_count;
+ OMAP_DMA_CFN_REG(lch) = frame_count;
}
+
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
u16 w;
BUG_ON(omap_dma_in_1510_mode());
- w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03;
+ if (cpu_is_omap24xx()) {
+ REVISIT_24XX();
+ return;
+ }
+
+ w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
switch (mode) {
case OMAP_DMA_CONSTANT_FILL:
w |= 0x01;
default:
BUG();
}
- omap_writew(w, OMAP_DMA_CCR2(lch));
+ OMAP1_DMA_CCR2_REG(lch) = w;
- w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f;
+ w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
/* Default is channel type 2D */
if (mode) {
- omap_writew((u16)color, OMAP_DMA_COLOR_L(lch));
- omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch));
+ OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
+ OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
w |= 1; /* Channel type G */
}
- omap_writew(w, OMAP_DMA_LCH_CTRL(lch));
+ OMAP1_DMA_LCH_CTRL_REG(lch) = w;
}
-
+/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
- unsigned long src_start)
+ unsigned long src_start,
+ int src_ei, int src_fi)
{
- u16 w;
+ if (cpu_class_is_omap1()) {
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
+ OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
+ }
+
+ OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
+ OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
+
+ if (cpu_class_is_omap1()) {
+ OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
+ OMAP1_DMA_CSSA_L_REG(lch) = src_start;
+ }
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~(0x1f << 2);
- w |= src_port << 2;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ if (cpu_is_omap24xx())
+ OMAP2_DMA_CSSA_REG(lch) = src_start;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(0x03 << 12);
- w |= src_amode << 12;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ OMAP_DMA_CSEI_REG(lch) = src_ei;
+ OMAP_DMA_CSFI_REG(lch) = src_fi;
+}
- omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch));
- omap_writew(src_start, OMAP_DMA_CSSA_L(lch));
+void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
+{
+ omap_set_dma_transfer_params(lch, params->data_type,
+ params->elem_count, params->frame_count,
+ params->sync_mode, params->trigger,
+ params->src_or_dst_synch);
+ omap_set_dma_src_params(lch, params->src_port,
+ params->src_amode, params->src_start,
+ params->src_ei, params->src_fi);
+
+ omap_set_dma_dest_params(lch, params->dst_port,
+ params->dst_amode, params->dst_start,
+ params->dst_ei, params->dst_fi);
}
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- omap_writew(eidx, OMAP_DMA_CSEI(lch));
- omap_writew(fidx, OMAP_DMA_CSFI(lch));
+ if (cpu_is_omap24xx()) {
+ REVISIT_24XX();
+ return;
+ }
+ OMAP_DMA_CSEI_REG(lch) = eidx;
+ OMAP_DMA_CSFI_REG(lch) = fidx;
}
void omap_set_dma_src_data_pack(int lch, int enable)
{
- u16 w;
-
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6);
- w |= enable ? (1 << 6) : 0;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
+ if (enable)
+ OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
}
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
- u16 w;
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- w |= (0x01 << 7);
+ OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
break;
case OMAP_DMA_DATA_BURST_8:
/* not supported by current hardware
default:
BUG();
}
- omap_writew(w, OMAP_DMA_CSDP(lch));
}
+/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
- unsigned long dest_start)
+ unsigned long dest_start,
+ int dst_ei, int dst_fi)
{
- u16 w;
+ if (cpu_class_is_omap1()) {
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
+ OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
+ }
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~(0x1f << 9);
- w |= dest_port << 9;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
+ OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
+
+ if (cpu_class_is_omap1()) {
+ OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
+ OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
+ }
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(0x03 << 14);
- w |= dest_amode << 14;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ if (cpu_is_omap24xx())
+ OMAP2_DMA_CDSA_REG(lch) = dest_start;
- omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch));
- omap_writew(dest_start, OMAP_DMA_CDSA_L(lch));
+ OMAP_DMA_CDEI_REG(lch) = dst_ei;
+ OMAP_DMA_CDFI_REG(lch) = dst_fi;
}
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- omap_writew(eidx, OMAP_DMA_CDEI(lch));
- omap_writew(fidx, OMAP_DMA_CDFI(lch));
+ if (cpu_is_omap24xx()) {
+ REVISIT_24XX();
+ return;
+ }
+ OMAP_DMA_CDEI_REG(lch) = eidx;
+ OMAP_DMA_CDFI_REG(lch) = fidx;
}
void omap_set_dma_dest_data_pack(int lch, int enable)
{
- u16 w;
-
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13);
- w |= enable ? (1 << 13) : 0;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
+ if (enable)
+ OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
}
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
- u16 w;
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- w |= (0x01 << 14);
+ OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
break;
case OMAP_DMA_DATA_BURST_8:
- w |= (0x03 << 14);
+ OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
break;
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
- omap_writew(w, OMAP_DMA_CSDP(lch));
}
-static inline void init_intr(int lch)
+static inline void omap_enable_channel_irq(int lch)
{
- u16 w;
+ u32 status;
/* Read CSR to make sure it's cleared. */
- w = omap_readw(OMAP_DMA_CSR(lch));
+ status = OMAP_DMA_CSR_REG(lch);
+
/* Enable some nice interrupts. */
- omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch));
+ OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
+
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
-static inline void enable_lnk(int lch)
+static void omap_disable_channel_irq(int lch)
{
- u16 w;
+ if (cpu_is_omap24xx())
+ OMAP_DMA_CICR_REG(lch) = 0;
+}
+
+void omap_enable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs |= bits;
+}
- /* Clear the STOP_LNK bits */
- w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
- w &= ~(1 << 14);
- omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs &= ~bits;
+}
+
+static inline void enable_lnk(int lch)
+{
+ if (cpu_class_is_omap1())
+ OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
- /* And set the ENABLE_LNK bits */
+ /* Set the ENABLE_LNK bits */
if (dma_chan[lch].next_lch != -1)
- omap_writew(dma_chan[lch].next_lch | (1 << 15),
- OMAP_DMA_CLNK_CTRL(lch));
+ OMAP_DMA_CLNK_CTRL_REG(lch) =
+ dma_chan[lch].next_lch | (1 << 15);
}
static inline void disable_lnk(int lch)
{
- u16 w;
-
/* Disable interrupts */
- omap_writew(0, OMAP_DMA_CICR(lch));
+ if (cpu_class_is_omap1()) {
+ OMAP_DMA_CICR_REG(lch) = 0;
+ /* Set the STOP_LNK bit */
+ OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
+ }
- /* Set the STOP_LNK bit */
- w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
- w |= (1 << 14);
- w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+ if (cpu_is_omap24xx()) {
+ omap_disable_channel_irq(lch);
+ /* Clear the ENABLE_LNK bit */
+ OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
+ }
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
-void omap_start_dma(int lch)
+static inline void omap2_enable_irq_lch(int lch)
{
- u16 w;
+ u32 val;
+
+ if (!cpu_is_omap24xx())
+ return;
+
+ val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+ val |= 1 << lch;
+ omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+}
+
+int omap_request_dma(int dev_id, const char *dev_name,
+ void (* callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch_out)
+{
+ int ch, free_ch = -1;
+ unsigned long flags;
+ struct omap_dma_lch *chan;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ for (ch = 0; ch < dma_chan_count; ch++) {
+ if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+ free_ch = ch;
+ if (dev_id == 0)
+ break;
+ }
+ }
+ if (free_ch == -1) {
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EBUSY;
+ }
+ chan = dma_chan + free_ch;
+ chan->dev_id = dev_id;
+
+ if (cpu_class_is_omap1())
+ clear_lch_regs(free_ch);
+ if (cpu_is_omap24xx())
+ omap_clear_dma(free_ch);
+
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ chan->dev_name = dev_name;
+ chan->callback = callback;
+ chan->data = data;
+ chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
+ OMAP_DMA_BLOCK_IRQ;
+
+ if (cpu_is_omap24xx())
+ chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+
+ if (cpu_is_omap16xx()) {
+ /* If the sync device is set, configure it dynamically. */
+ if (dev_id != 0) {
+ set_gdma_dev(free_ch + 1, dev_id);
+ dev_id = free_ch + 1;
+ }
+ /* Disable the 1510 compatibility mode and set the sync device
+ * id. */
+ OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
+ } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+ OMAP_DMA_CCR_REG(free_ch) = dev_id;
+ }
+
+ if (cpu_is_omap24xx()) {
+ omap2_enable_irq_lch(free_ch);
+
+ omap_enable_channel_irq(free_ch);
+ /* Clear the CSR register and IRQ status register */
+ OMAP_DMA_CSR_REG(free_ch) = 0x0;
+ omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+ }
+
+ *dma_ch_out = free_ch;
+
+ return 0;
+}
+
+void omap_free_dma(int lch)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ if (dma_chan[lch].dev_id == -1) {
+ printk("omap_dma: trying to free nonallocated DMA channel %d\n",
+ lch);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return;
+ }
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ if (cpu_class_is_omap1()) {
+ /* Disable all DMA interrupts for the channel. */
+ OMAP_DMA_CICR_REG(lch) = 0;
+ /* Make sure the DMA transfer is stopped. */
+ OMAP_DMA_CCR_REG(lch) = 0;
+ }
+
+ if (cpu_is_omap24xx()) {
+ u32 val;
+ /* Disable interrupts */
+ val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
+ val &= ~(1 << lch);
+ omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
+
+ /* Clear the CSR register and IRQ status register */
+ OMAP_DMA_CSR_REG(lch) = 0x0;
+
+ val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+ val |= 1 << lch;
+ omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+ /* Disable all DMA interrupts for the channel. */
+ OMAP_DMA_CICR_REG(lch) = 0;
+
+ /* Make sure the DMA transfer is stopped. */
+ OMAP_DMA_CCR_REG(lch) = 0;
+ omap_clear_dma(lch);
+ }
+}
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+void omap_clear_dma(int lch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (cpu_class_is_omap1()) {
+ int status;
+ OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
+
+ /* Clear pending interrupts */
+ status = OMAP_DMA_CSR_REG(lch);
+ }
+
+ if (cpu_is_omap24xx()) {
+ int i;
+ u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80;
+ for (i = 0; i < 0x44; i += 4)
+ omap_writel(0, lch_base + i);
+ }
+
+ local_irq_restore(flags);
+}
+
+void omap_start_dma(int lch)
+{
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
do {
next_lch = dma_chan[cur_lch].next_lch;
- /* The loop case: we've been here already */
+ /* The loop case: we've been here already */
if (dma_chan_link_map[cur_lch])
break;
/* Mark the current channel */
dma_chan_link_map[cur_lch] = 1;
enable_lnk(cur_lch);
- init_intr(cur_lch);
+ omap_enable_channel_irq(cur_lch);
cur_lch = next_lch;
} while (next_lch != -1);
+ } else if (cpu_is_omap24xx()) {
+ /* Errata: Need to write lch even if not using chaining */
+ OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
}
- init_intr(lch);
+ omap_enable_channel_irq(lch);
+
+ /* Errata: On ES2.0 BUFFERING disable must be set.
+ * This will always fail on ES1.0 */
+ if (cpu_is_omap24xx()) {
+ OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
+ }
+
+ OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w |= OMAP_DMA_CCR_EN;
- omap_writew(w, OMAP_DMA_CCR(lch));
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
void omap_stop_dma(int lch)
{
- u16 w;
-
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
return;
}
+
/* Disable all interrupts on the channel */
- omap_writew(0, OMAP_DMA_CICR(lch));
+ if (cpu_class_is_omap1())
+ OMAP_DMA_CICR_REG(lch) = 0;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~OMAP_DMA_CCR_EN;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
-void omap_enable_dma_irq(int lch, u16 bits)
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
{
- dma_chan[lch].enabled_irqs |= bits;
-}
+ dma_addr_t offset;
-void omap_disable_dma_irq(int lch, u16 bits)
-{
- dma_chan[lch].enabled_irqs &= ~bits;
-}
+ if (cpu_class_is_omap1())
+ offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
+ (OMAP1_DMA_CSSA_U_REG(lch) << 16));
-static int dma_handle_ch(int ch)
-{
- u16 csr;
+ if (cpu_is_omap24xx())
+ offset = OMAP_DMA_CSAC_REG(lch);
- if (enable_1510_mode && ch >= 6) {
- csr = dma_chan[ch].saved_csr;
- dma_chan[ch].saved_csr = 0;
- } else
- csr = omap_readw(OMAP_DMA_CSR(ch));
- if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
- dma_chan[ch + 6].saved_csr = csr >> 7;
- csr &= 0x7f;
- }
- if ((csr & 0x3f) == 0)
- return 0;
- if (unlikely(dma_chan[ch].dev_id == -1)) {
- printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
- ch, csr);
- return 0;
- }
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
- printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id);
- if (unlikely(csr & OMAP_DMA_DROP_IRQ))
- printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n",
- dma_chan[ch].dev_id);
- if (likely(csr & OMAP_DMA_BLOCK_IRQ))
- dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
- if (likely(dma_chan[ch].callback != NULL))
- dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
- return 1;
+ return offset;
}
-static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
{
- int ch = ((int) dev_id) - 1;
- int handled = 0;
+ dma_addr_t offset;
- for (;;) {
- int handled_now = 0;
+ if (cpu_class_is_omap1())
+ offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
+ (OMAP1_DMA_CDSA_U_REG(lch) << 16));
- handled_now += dma_handle_ch(ch);
- if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
- handled_now += dma_handle_ch(ch + 6);
- if (!handled_now)
- break;
- handled += handled_now;
- }
+ if (cpu_is_omap24xx())
+ offset = OMAP2_DMA_CDSA_REG(lch);
- return handled ? IRQ_HANDLED : IRQ_NONE;
+ return offset;
}
-int omap_request_dma(int dev_id, const char *dev_name,
- void (* callback)(int lch, u16 ch_status, void *data),
- void *data, int *dma_ch_out)
+/*
+ * Returns current source transfer counting for the given DMA channel.
+ * Can be used to monitor the progress of a transfer inside a block.
+ * It must be called with disabled interrupts.
+ */
+int omap_get_dma_src_addr_counter(int lch)
{
- int ch, free_ch = -1;
- unsigned long flags;
- struct omap_dma_lch *chan;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- for (ch = 0; ch < dma_chan_count; ch++) {
- if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
- free_ch = ch;
- if (dev_id == 0)
- break;
- }
- }
- if (free_ch == -1) {
- spin_unlock_irqrestore(&dma_chan_lock, flags);
- return -EBUSY;
- }
- chan = dma_chan + free_ch;
- chan->dev_id = dev_id;
- clear_lch_regs(free_ch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
- chan->dev_id = dev_id;
- chan->dev_name = dev_name;
- chan->callback = callback;
- chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
-
- if (cpu_is_omap16xx()) {
- /* If the sync device is set, configure it dynamically. */
- if (dev_id != 0) {
- set_gdma_dev(free_ch + 1, dev_id);
- dev_id = free_ch + 1;
- }
- /* Disable the 1510 compatibility mode and set the sync device
- * id. */
- omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch));
- } else {
- omap_writew(dev_id, OMAP_DMA_CCR(free_ch));
- }
- *dma_ch_out = free_ch;
-
- return 0;
+ return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
}
-void omap_free_dma(int ch)
+int omap_dma_running(void)
{
- unsigned long flags;
+ int lch;
- spin_lock_irqsave(&dma_chan_lock, flags);
- if (dma_chan[ch].dev_id == -1) {
- printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
- return;
- }
- dma_chan[ch].dev_id = -1;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
+ /* Check if LCD DMA is running */
+ if (cpu_is_omap16xx())
+ if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+ return 1;
- /* Disable all DMA interrupts for the channel. */
- omap_writew(0, OMAP_DMA_CICR(ch));
- /* Make sure the DMA transfer is stopped. */
- omap_writew(0, OMAP_DMA_CCR(ch));
-}
+ for (lch = 0; lch < dma_chan_count; lch++)
+ if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
+ return 1;
-int omap_dma_in_1510_mode(void)
-{
- return enable_1510_mode;
+ return 0;
}
/*
if ((dma_chan[lch_head].dev_id == -1) ||
(dma_chan[lch_queue].dev_id == -1)) {
- printk(KERN_ERR "omap_dma: trying to link non requested channels\n");
+ printk(KERN_ERR "omap_dma: trying to link "
+ "non requested channels\n");
dump_stack();
}
if (dma_chan[lch_head].next_lch != lch_queue ||
dma_chan[lch_head].next_lch == -1) {
- printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n");
+ printk(KERN_ERR "omap_dma: trying to unlink "
+ "non linked channels\n");
dump_stack();
}
if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
(dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
- printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n");
+ printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
+ "before unlinking\n");
dump_stack();
}
dma_chan[lch_head].next_lch = -1;
}
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
+{
+ u16 csr;
+
+ if (enable_1510_mode && ch >= 6) {
+ csr = dma_chan[ch].saved_csr;
+ dma_chan[ch].saved_csr = 0;
+ } else
+ csr = OMAP_DMA_CSR_REG(ch);
+ if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+ dma_chan[ch + 6].saved_csr = csr >> 7;
+ csr &= 0x7f;
+ }
+ if ((csr & 0x3f) == 0)
+ return 0;
+ if (unlikely(dma_chan[ch].dev_id == -1)) {
+ printk(KERN_WARNING "Spurious interrupt from DMA channel "
+ "%d (CSR %04x)\n", ch, csr);
+ return 0;
+ }
+ if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+ printk(KERN_WARNING "DMA timeout with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+ printk(KERN_WARNING "DMA synchronization event drop occurred "
+ "with device %d\n", dma_chan[ch].dev_id);
+ if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+ dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+ return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ int ch = ((int) dev_id) - 1;
+ int handled = 0;
+
+ for (;;) {
+ int handled_now = 0;
+
+ handled_now += omap1_dma_handle_ch(ch);
+ if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+ handled_now += omap1_dma_handle_ch(ch + 6);
+ if (!handled_now)
+ break;
+ handled += handled_now;
+ }
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#else
+#define omap1_dma_irq_handler NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static int omap2_dma_handle_ch(int ch)
+{
+ u32 status = OMAP_DMA_CSR_REG(ch);
+ u32 val;
+
+ if (!status)
+ return 0;
+ if (unlikely(dma_chan[ch].dev_id == -1))
+ return 0;
+ /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
+ if (unlikely(status & OMAP_DMA_TOUT_IRQ))
+ printk(KERN_INFO "DMA timeout with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP_DMA_DROP_IRQ))
+ printk(KERN_INFO
+ "DMA synchronization event drop occurred with device "
+ "%d\n", dma_chan[ch].dev_id);
+
+ if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
+ printk(KERN_INFO "DMA transaction error with device %d\n",
+ dma_chan[ch].dev_id);
+
+ OMAP_DMA_CSR_REG(ch) = 0x20;
+
+ val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+ /* ch in this function is from 0-31 while in register it is 1-32 */
+ val = 1 << (ch);
+ omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, status, dma_chan[ch].data);
+
+ return 0;
+}
+
+/* STATUS register count is from 1-32 while our is 0-31 */
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ u32 val;
+ int i;
+
+ val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
+
+ for (i = 1; i <= OMAP_LOGICAL_DMA_CH_COUNT; i++) {
+ int active = val & (1 << (i - 1));
+ if (active)
+ omap2_dma_handle_ch(i - 1);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap24xx_dma_irq = {
+ .name = "DMA",
+ .handler = omap2_dma_irq_handler,
+ .flags = SA_INTERRUPT
+};
+
+#else
+static struct irqaction omap24xx_dma_irq;
+#endif
+
+/*----------------------------------------------------------------------------*/
static struct lcd_dma_info {
spinlock_t lock;
/* Always set the source port as SDRAM for now*/
w &= ~(0x03 << 6);
if (lcd_dma.callback != NULL)
- w |= 1 << 1; /* Block interrupt enable */
+ w |= 1 << 1; /* Block interrupt enable */
else
w &= ~(1 << 1);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
}
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
{
u16 w;
return;
}
if (!enable_1510_mode)
- omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR);
+ omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+ OMAP1610_DMA_LCD_CCR);
lcd_dma.reserved = 0;
spin_unlock(&lcd_dma.lock);
}
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
-/*
- * Clears any DMA state so the DMA engine is ready to restart with new buffers
- * through omap_start_dma(). Any buffers in flight are discarded.
- */
-void omap_clear_dma(int lch)
-{
- unsigned long flags;
- int status;
-
- local_irq_save(flags);
- omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN,
- OMAP_DMA_CCR(lch));
- status = OMAP_DMA_CSR(lch); /* clear pending interrupts */
- local_irq_restore(flags);
-}
-
-/*
- * Returns current physical source address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_src_pos(int lch)
-{
- return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) |
- (omap_readw(OMAP_DMA_CSSA_U(lch)) << 16));
-}
-
-/*
- * Returns current physical destination address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_dst_pos(int lch)
-{
- return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) |
- (omap_readw(OMAP_DMA_CDSA_U(lch)) << 16));
-}
-
-/*
- * Returns current source transfer counting for the given DMA channel.
- * Can be used to monitor the progress of a transfer inside a block.
- * It must be called with disabled interrupts.
- */
-int omap_get_dma_src_addr_counter(int lch)
-{
- return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch));
-}
-
-int omap_dma_running(void)
-{
- int lch;
-
- /* Check if LCD DMA is running */
- if (cpu_is_omap16xx())
- if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
- return 1;
-
- for (lch = 0; lch < dma_chan_count; lch++) {
- u16 w;
-
- w = omap_readw(OMAP_DMA_CCR(lch));
- if (w & OMAP_DMA_CCR_EN)
- return 1;
- }
- return 0;
-}
+/*----------------------------------------------------------------------------*/
static int __init omap_init_dma(void)
{
int ch, r;
- if (cpu_is_omap1510()) {
- printk(KERN_INFO "DMA support for OMAP1510 initialized\n");
+ if (cpu_is_omap15xx()) {
+ printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
omap_readw(OMAP_DMA_HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
- (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L),
- (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L),
+ (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
+ omap_readw(OMAP_DMA_CAPS_0_L),
+ (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
+ omap_readw(OMAP_DMA_CAPS_1_L),
omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
omap_readw(OMAP_DMA_CAPS_4));
if (!enable_1510_mode) {
dma_chan_count = 16;
} else
dma_chan_count = 9;
+ } else if (cpu_is_omap24xx()) {
+ u8 revision = omap_readb(OMAP_DMA4_REVISION);
+ printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+ revision >> 4, revision & 0xf);
+ dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
} else {
dma_chan_count = 0;
return 0;
memset(&dma_chan, 0, sizeof(dma_chan));
for (ch = 0; ch < dma_chan_count; ch++) {
+ omap_clear_dma(ch);
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
if (ch >= 6 && enable_1510_mode)
continue;
- /* request_irq() doesn't like dev_id (ie. ch) being zero,
- * so we have to kludge around this. */
- r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA",
- (void *) (ch + 1));
+ if (cpu_class_is_omap1()) {
+ /* request_irq() doesn't like dev_id (ie. ch) being
+ * zero, so we have to kludge around this. */
+ r = request_irq(omap1_dma_irq[ch],
+ omap1_dma_irq_handler, 0, "DMA",
+ (void *) (ch + 1));
+ if (r != 0) {
+ int i;
+
+ printk(KERN_ERR "unable to request IRQ %d "
+ "for DMA (error %d)\n",
+ omap1_dma_irq[ch], r);
+ for (i = 0; i < ch; i++)
+ free_irq(omap1_dma_irq[i],
+ (void *) (i + 1));
+ return r;
+ }
+ }
+ }
+
+ if (cpu_is_omap24xx())
+ setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+
+ /* FIXME: Update LCD DMA to work on 24xx */
+ if (cpu_class_is_omap1()) {
+ r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+ "LCD DMA", NULL);
if (r != 0) {
int i;
- printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n",
- dma_irq[ch], r);
- for (i = 0; i < ch; i++)
- free_irq(dma_irq[i], (void *) (i + 1));
+ printk(KERN_ERR "unable to request IRQ for LCD DMA "
+ "(error %d)\n", r);
+ for (i = 0; i < dma_chan_count; i++)
+ free_irq(omap1_dma_irq[i], (void *) (i + 1));
return r;
}
}
- r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL);
- if (r != 0) {
- int i;
- printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r);
- for (i = 0; i < dma_chan_count; i++)
- free_irq(dma_irq[i], (void *) (i + 1));
- return r;
- }
return 0;
}
arch_initcall(omap_init_dma);
-
EXPORT_SYMBOL(omap_get_dma_src_pos);
EXPORT_SYMBOL(omap_get_dma_dst_pos);
EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
+EXPORT_SYMBOL(omap_set_dma_params);
+
EXPORT_SYMBOL(omap_dma_link_lch);
EXPORT_SYMBOL(omap_dma_unlink_lch);
};
#endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
{ OMAP_MPUIO_BASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
static inline struct gpio_bank *get_gpio_bank(int gpio)
{
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
if (OMAP_GPIO_IS_MPUIO(gpio))
return &gpio_bank[0];
return -1;
return 0;
}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510() && gpio < 16)
return 0;
#endif
/* Set trigger to none. You need to enable the trigger after request_irq */
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {
void __iomem *reg;
bank = (struct gpio_bank *) desc->data;
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510)
isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
#endif
d = irq_desc + gpio_irq;
desc_handle_irq(gpio_irq, d, regs);
}
- }
+ }
}
static void gpio_ack_irq(unsigned int irq)
.unmask = mpuio_unmask_irq
};
-static int initialized = 0;
-static struct clk * gpio_ck = NULL;
+static int initialized;
+static struct clk * gpio_ick;
+static struct clk * gpio_fck;
static int __init _omap_gpio_init(void)
{
initialized = 1;
if (cpu_is_omap1510()) {
- gpio_ck = clk_get(NULL, "arm_gpio_ck");
- if (IS_ERR(gpio_ck))
+ gpio_ick = clk_get(NULL, "arm_gpio_ck");
+ if (IS_ERR(gpio_ick))
printk("Could not get arm_gpio_ck\n");
else
- clk_use(gpio_ck);
+ clk_use(gpio_ick);
+ }
+ if (cpu_is_omap24xx()) {
+ gpio_ick = clk_get(NULL, "gpios_ick");
+ if (IS_ERR(gpio_ick))
+ printk("Could not get gpios_ick\n");
+ else
+ clk_use(gpio_ick);
+ gpio_fck = clk_get(NULL, "gpios_fck");
+ if (IS_ERR(gpio_ick))
+ printk("Could not get gpios_fck\n");
+ else
+ clk_use(gpio_fck);
}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
printk(KERN_INFO "OMAP1510 GPIO hardware\n");
gpio_bank_count = 2;
if (bank->method == METHOD_MPUIO) {
omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
}
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
/*
* This may get called early from board specific init
+ * for boards that have interrupts routed via FPGA.
*/
int omap_gpio_init(void)
{
omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
OMAP_DMA_DATA_TYPE_S16,
length >> 1, 1,
- OMAP_DMA_SYNC_ELEMENT);
+ OMAP_DMA_SYNC_ELEMENT,
+ 0, 0);
omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1);
+ mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+ 0, 0);
omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC,
- buffer);
+ buffer,
+ 0, 0);
omap_start_dma(mcbsp[id].dma_tx_lch);
wait_for_completion(&(mcbsp[id].tx_dma_completion));
omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
OMAP_DMA_DATA_TYPE_S16,
length >> 1, 1,
- OMAP_DMA_SYNC_ELEMENT);
+ OMAP_DMA_SYNC_ELEMENT,
+ 0, 0);
omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1);
+ mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+ 0, 0);
omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC,
- buffer);
+ buffer,
+ 0, 0);
omap_start_dma(mcbsp[id].dma_rx_lch);
wait_for_completion(&(mcbsp[id].rx_dma_completion));
};
#endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
static const struct omap_mcbsp_info mcbsp_1510[] = {
[0] = { .virt_base = OMAP1510_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
mcbsp_count = ARRAY_SIZE(mcbsp_730);
}
#endif
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
mcbsp_info = mcbsp_1510;
mcbsp_count = ARRAY_SIZE(mcbsp_1510);
*
* Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
*
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/spinlock.h>
-
-#define __MUX_C__
#include <asm/arch/mux.h>
#ifdef CONFIG_OMAP_MUX
+#define OMAP24XX_L4_BASE 0x48000000
+#define OMAP24XX_PULL_ENA (1 << 3)
+#define OMAP24XX_PULL_UP (1 << 4)
+
+static struct pin_config * pin_table;
+static unsigned long pin_table_sz;
+
+extern struct pin_config * omap730_pins;
+extern struct pin_config * omap1xxx_pins;
+extern struct pin_config * omap24xx_pins;
+
+int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+{
+ pin_table = pins;
+ pin_table_sz = size;
+
+ return 0;
+}
+
/*
* Sets the Omap MUX and PULL_DWN registers based on the table
*/
-int __init_or_module
-omap_cfg_reg(const reg_cfg_t reg_cfg)
+int __init_or_module omap_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
unsigned long flags;
- reg_cfg_set *cfg;
+ struct pin_config *cfg;
unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
pull_orig = 0, pull = 0;
unsigned int mask, warn = 0;
- if (cpu_is_omap7xx())
- return 0;
+ if (!pin_table)
+ BUG();
- if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
- printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
- return -EINVAL;
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
}
- cfg = (reg_cfg_set *)®_cfg_table[reg_cfg];
+ cfg = (struct pin_config *)&pin_table[index];
+ if (cpu_is_omap24xx()) {
+ u8 reg = 0;
+
+ reg |= cfg->mask & 0x7;
+ if (cfg->pull_val)
+ reg |= OMAP24XX_PULL_ENA;
+ if(cfg->pu_pd_val)
+ reg |= OMAP24XX_PULL_UP;
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
+ cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
+ omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#endif
+ omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+
+ return 0;
+ }
/* Check the mux register in question */
if (cfg->mux_reg) {
return 0;
#endif
}
-
EXPORT_SYMBOL(omap_cfg_reg);
-
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
#endif /* CONFIG_OMAP_MUX */
#include <asm/arch/tps65010.h>
#include <asm/arch/dsp_common.h>
-#include "clock.h"
-#include "sram.h"
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
*/
static void omap_pm_wakeup_setup(void)
{
- u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ);
- u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD);
+ u32 level1_wake = 0;
+ u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
/*
* Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
* drivers must still separately call omap_set_gpio_wakeup() to
* wake up to a GPIO interrupt.
*/
- if (cpu_is_omap1510() || cpu_is_omap16xx())
- level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1);
- else if (cpu_is_omap730())
- level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1);
+ if (cpu_is_omap730())
+ level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+ else if (cpu_is_omap1510())
+ level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+ else if (cpu_is_omap16xx())
+ level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
omap_writel(~level1_wake, OMAP_IH1_MIR);
- if (cpu_is_omap1510())
+ if (cpu_is_omap730()) {
+ omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+ omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap1510()) {
+ level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
omap_writel(~level2_wake, OMAP_IH2_MIR);
-
- /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
- if (cpu_is_omap16xx()) {
+ } else if (cpu_is_omap16xx()) {
+ level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+ /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
omap_writel(~0x0, OMAP_IH2_2_MIR);
omap_writel(~0x0, OMAP_IH2_3_MIR);
* Save interrupt, MPUI, ARM and UPLD control registers.
*/
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap730()) {
+ MPUI730_SAVE(OMAP_IH1_MIR);
+ MPUI730_SAVE(OMAP_IH2_0_MIR);
+ MPUI730_SAVE(OMAP_IH2_1_MIR);
+ MPUI730_SAVE(MPUI_CTRL);
+ MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI730_SAVE(EMIFS_CONFIG);
+ MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+
+ } else if (cpu_is_omap1510()) {
MPUI1510_SAVE(OMAP_IH1_MIR);
MPUI1510_SAVE(OMAP_IH2_MIR);
MPUI1510_SAVE(MPUI_CTRL);
ULPD_RESTORE(ULPD_CLOCK_CTRL);
ULPD_RESTORE(ULPD_STATUS_REQ);
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap730()) {
+ MPUI730_RESTORE(EMIFS_CONFIG);
+ MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+ MPUI730_RESTORE(OMAP_IH1_MIR);
+ MPUI730_RESTORE(OMAP_IH2_0_MIR);
+ MPUI730_RESTORE(OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap1510()) {
MPUI1510_RESTORE(MPUI_CTRL);
MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
ULPD_SAVE(ULPD_DPLL_CTRL);
ULPD_SAVE(ULPD_POWER_CTRL);
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap730()) {
+ MPUI730_SAVE(MPUI_CTRL);
+ MPUI730_SAVE(MPUI_DSP_STATUS);
+ MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+ MPUI730_SAVE(EMIFS_CONFIG);
+ } else if (cpu_is_omap1510()) {
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_STATUS);
MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
ULPD_SHOW(ULPD_STATUS_REQ),
ULPD_SHOW(ULPD_POWER_CTRL));
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap730()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "MPUI730_CTRL_REG 0x%-8x \n"
+ "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
+ "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
+ MPUI730_SHOW(MPUI_CTRL),
+ MPUI730_SHOW(MPUI_DSP_STATUS),
+ MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+ MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+ MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+ MPUI730_SHOW(EMIFS_CONFIG));
+ } else if (cpu_is_omap1510()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1510_CTRL_REG 0x%-8x \n"
"MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
- if (cpu_is_omap1510()) {
+ if (cpu_is_omap730()) {
+ omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
+ omap730_idle_loop_suspend_sz);
+ omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+ omap730_cpu_suspend_sz);
+ } else if (cpu_is_omap1510()) {
omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
omap1510_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
pm_idle = omap_pm_idle;
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+ if (cpu_is_omap730())
+ setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+ else if (cpu_is_omap16xx())
+ setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
#if 0
/* --- BEGIN BOARD-DEPENDENT CODE --- */
/* Sleepx mask direction */
omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
/* Configure IDLECT3 */
- if (cpu_is_omap16xx())
+ if (cpu_is_omap730())
+ omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+ else if (cpu_is_omap16xx())
omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
pm_set_ops(&omap_pm_ops);
omap_pm_init_proc();
#endif
- /* configure LOW_PWR pin */
- omap_cfg_reg(T20_1610_LOW_PWR);
+ if (cpu_is_omap16xx()) {
+ /* configure LOW_PWR pin */
+ omap_cfg_reg(T20_1610_LOW_PWR);
+ }
return 0;
}
/*
* linux/arch/arm/plat-omap/sleep.S
*
- * Low-level OMAP1510/1610 sleep/wakeUp support
+ * Low-level OMAP730/1510/1610 sleep/wakeUp support
*
* Initial SA1110 code:
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
* processor specific functions here.
*/
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_idle_loop_suspend)
+
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+
+ @ load base address of ARM_IDLECT1 and ARM_IDLECT2
+ mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+ orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+ orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+ @ turn off clock domains
+ @ get ARM_IDLECT2 into r2
+ ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+ mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+ orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+ strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+ @ request ARM idle
+ @ get ARM_IDLECT1 into r1
+ ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+ orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff
+ strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+ mov r5, #IDLE_WAIT_CYCLES & 0xff
+ orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+l_730: subs r5, r5, #1
+ bne l_730
+/*
+ * Let's wait for the next clock tick to wake us up.
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+/*
+ * omap730_idle_loop_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ */
+
+ @ restore ARM_IDLECT1 and ARM_IDLECT2 and return
+ @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
+ strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+ strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+
+ENTRY(omap730_idle_loop_suspend_sz)
+ .word . - omap730_idle_loop_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
ENTRY(omap1510_idle_loop_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
ENTRY(omap1510_idle_loop_suspend_sz)
.word . - omap1510_idle_loop_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
#if defined(CONFIG_ARCH_OMAP16XX)
ENTRY(omap1610_idle_loop_suspend)
*
*/
-#ifdef CONFIG_ARCH_OMAP1510
+#if defined(CONFIG_ARCH_OMAP730)
+ENTRY(omap730_cpu_suspend)
+
+ @ save registers on stack
+ stmfd sp!, {r0 - r12, lr}
+
+ @ Drain write cache
+ mov r4, #0
+ mcr p15, 0, r0, c7, c10, 4
+ nop
+
+ @ load base address of Traffic Controller
+ mov r6, #TCMIF_ASM_BASE & 0xff000000
+ orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+ orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
+
+ @ prepare to put SDRAM into self-refresh manually
+ ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+ orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
+ orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+ str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+ @ prepare to put EMIFS to Sleep
+ ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+ orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+ str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+ @ load base address of ARM_IDLECT1 and ARM_IDLECT2
+ mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+ orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+ orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+ @ turn off clock domains
+ @ do not disable PERCK (0x04)
+ mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
+ orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+ strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+ @ request ARM idle
+ mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
+ orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+ strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+ @ disable instruction cache
+ mrc p15, 0, r9, c1, c0, 0
+ bic r2, r9, #0x1000
+ mcr p15, 0, r2, c1, c0, 0
+ nop
+
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+ mov r2, #0
+ mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+/*
+ * omap730_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+ */
+ @ re-enable Icache
+ mcr p15, 0, r9, c1, c0, 0
+
+ @ reset the ARM_IDLECT1 and ARM_IDLECT2.
+ strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+ strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+ @ Restore EMIFF controls
+ str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+ str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+ @ restore regs and return
+ ldmfd sp!, {r0 - r12, pc}
+
+ENTRY(omap730_cpu_suspend_sz)
+ .word . - omap730_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
ENTRY(omap1510_cpu_suspend)
@ save registers on stack
ENTRY(omap1510_cpu_suspend_sz)
.word . - omap1510_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP1510 */
+#endif /* CONFIG_ARCH_OMAP15XX */
#if defined(CONFIG_ARCH_OMAP16XX)
ENTRY(omap1610_cpu_suspend)
#include <asm/io.h>
#include <asm/cacheflush.h>
-#include "sram.h"
+#include <asm/arch/sram.h>
+
+#define OMAP1_SRAM_PA 0x20000000
+#define OMAP1_SRAM_VA 0xd0000000
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP2_SRAM_VA 0xd0000000
-#define OMAP1_SRAM_BASE 0xd0000000
-#define OMAP1_SRAM_START 0x20000000
#define SRAM_BOOTLOADER_SZ 0x80
static unsigned long omap_sram_base;
static unsigned long omap_sram_ceil;
/*
- * The amount of SRAM depends on the core type:
- * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
+ * The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
void __init omap_detect_sram(void)
{
- omap_sram_base = OMAP1_SRAM_BASE;
+ if (!cpu_is_omap24xx())
+ omap_sram_base = OMAP1_SRAM_VA;
+ else
+ omap_sram_base = OMAP2_SRAM_VA;
if (cpu_is_omap730())
- omap_sram_size = 0x32000;
- else if (cpu_is_omap1510())
- omap_sram_size = 0x80000;
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
- omap_sram_size = 0x4000;
+ omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800;
+ omap_sram_size = 0x3e800; /* 250K */
+ else if (cpu_is_omap2420())
+ omap_sram_size = 0xa0014; /* 640K */
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
- printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
omap_sram_ceil = omap_sram_base + omap_sram_size;
}
static struct map_desc omap_sram_io_desc[] __initdata = {
{ /* .length gets filled in at runtime */
- .virtual = OMAP1_SRAM_BASE,
- .pfn = __phys_to_pfn(OMAP1_SRAM_START),
+ .virtual = OMAP1_SRAM_VA,
+ .pfn = __phys_to_pfn(OMAP1_SRAM_PA),
.type = MT_DEVICE
}
};
if (omap_sram_size == 0)
return;
+ if (cpu_is_omap24xx()) {
+ omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA);
+ }
+
omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
omap_sram_io_desc[0].length *= PAGE_SIZE;
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
+ printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
+ omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
+ omap_sram_io_desc[0].length);
+
/*
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
omap_sram_size - SRAM_BOOTLOADER_SZ);
}
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL;
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
- if (_omap_sram_reprogram_clock == NULL)
- panic("Cannot use SRAM");
-
- return _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
void * omap_sram_push(void * start, unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
return (void *)omap_sram_ceil;
}
-void __init omap_sram_init(void)
+static void omap_sram_error(void)
+{
+ panic("Uninitialized SRAM function\n");
+}
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+ if (!_omap_sram_reprogram_clock)
+ omap_sram_error();
+
+ return _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap1_sram_init(void)
{
- omap_detect_sram();
- omap_map_sram();
_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
sram_reprogram_clock_sz);
+
+ return 0;
+}
+
+#else
+#define omap1_sram_init() do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+ if (!_omap2_sram_ddr_init)
+ omap_sram_error();
+
+ return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+ if (!_omap2_sram_reprogram_sdrc)
+ omap_sram_error();
+
+ return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+ if (!_omap2_set_prcm)
+ omap_sram_error();
+
+ return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+int __init omap2_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
+ sram_reprogram_sdrc_sz);
+ _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+#define omap2_sram_init() do {} while (0)
+#endif
+
+int __init omap_sram_init(void)
+{
+ omap_detect_sram();
+ omap_map_sram();
+
+ if (!cpu_is_omap24xx())
+ omap1_sram_init();
+ else
+ omap2_sram_init();
+
+ return 0;
}
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
-
-#endif
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
+
static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
return syscon1 << 24;
}
+#endif
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_USB_GADGET_OMAP) || \
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
#define ULPD_DPLL_CTRL_REG __REG16(ULPD_DPLL_CTRL)
#define DPLL_IOB (1 << 13)
static void __init omap_1510_usb_init(struct omap_usb_config *config)
{
- int status;
unsigned int val;
omap_usb0_init(config->pins[0], is_usb0_device(config));
#ifdef CONFIG_USB_GADGET_OMAP
if (config->register_dev) {
+ int status;
+
udc_device.dev.platform_data = config;
status = platform_device_register(&udc_device);
if (status)
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
if (config->register_host) {
+ int status;
+
ohci_device.dev.platform_data = config;
status = platform_device_register(&ohci_device);
if (status)
projects / linux-2.6 / commitdiff