Make various pte accessors common.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
#define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval)
#define set_pte_present(mm,addr,ptep,pteval) set_pte_at(mm,addr,ptep,pteval)
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *xp)
#define set_pte_atomic(ptep, pte) native_set_pte_atomic(ptep, pte)
#define set_pmd(pmdp, pmd) native_set_pmd(pmdp, pmd)
#define set_pud(pudp, pud) native_set_pud(pudp, pud)
-#define pte_clear(mm, addr, ptep) native_pte_clear(mm, addr, ptep)
#define pmd_clear(pmd) native_pmd_clear(pmd)
#endif
#define __S111 PAGE_SHARED_EXEC
#ifndef __ASSEMBLY__
+
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
return __pte(val);
}
-
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_X86_32
# include "pgtable_64.h"
#endif
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_PARAVIRT
+/*
+ * Rules for using pte_update - it must be called after any PTE update which
+ * has not been done using the set_pte / clear_pte interfaces. It is used by
+ * shadow mode hypervisors to resynchronize the shadow page tables. Kernel PTE
+ * updates should either be sets, clears, or set_pte_atomic for P->P
+ * transitions, which means this hook should only be called for user PTEs.
+ * This hook implies a P->P protection or access change has taken place, which
+ * requires a subsequent TLB flush. The notification can optionally be delayed
+ * until the TLB flush event by using the pte_update_defer form of the
+ * interface, but care must be taken to assure that the flush happens while
+ * still holding the same page table lock so that the shadow and primary pages
+ * do not become out of sync on SMP.
+ */
+#define pte_update(mm, addr, ptep) do { } while (0)
+#define pte_update_defer(mm, addr, ptep) do { } while (0)
+#endif
+
+/* local pte updates need not use xchg for locking */
+static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
+{
+ pte_t res = *ptep;
+
+ /* Pure native function needs no input for mm, addr */
+ native_pte_clear(NULL, 0, ptep);
+ return res;
+}
+
+/*
+ * We only update the dirty/accessed state if we set
+ * the dirty bit by hand in the kernel, since the hardware
+ * will do the accessed bit for us, and we don't want to
+ * race with other CPU's that might be updating the dirty
+ * bit at the same time.
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(vma, address, ptep, entry, dirty) \
+({ \
+ int __changed = !pte_same(*(ptep), entry); \
+ if (__changed && dirty) { \
+ *ptep = entry; \
+ pte_update_defer((vma)->vm_mm, (address), (ptep)); \
+ flush_tlb_page(vma, address); \
+ } \
+ __changed; \
+})
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(vma, addr, ptep) ({ \
+ int __ret = 0; \
+ if (pte_young(*(ptep))) \
+ __ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, \
+ &(ptep)->pte); \
+ if (__ret) \
+ pte_update((vma)->vm_mm, addr, ptep); \
+ __ret; \
+})
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(vma, address, ptep) \
+({ \
+ int __young; \
+ __young = ptep_test_and_clear_young((vma), (address), (ptep)); \
+ if (__young) \
+ flush_tlb_page(vma, address); \
+ __young; \
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_t pte = native_ptep_get_and_clear(ptep);
+ pte_update(mm, addr, ptep);
+ return pte;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
+{
+ pte_t pte;
+ if (full) {
+ /*
+ * Full address destruction in progress; paravirt does not
+ * care about updates and native needs no locking
+ */
+ pte = native_local_ptep_get_and_clear(ptep);
+ } else {
+ pte = ptep_get_and_clear(mm, addr, ptep);
+ }
+ return pte;
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ clear_bit(_PAGE_BIT_RW, &ptep->pte);
+ pte_update(mm, addr, ptep);
+}
+
+#ifndef CONFIG_PARAVIRT
+#define pte_clear(mm, addr, ptep) native_pte_clear(mm, addr, ptep)
+#endif /* !CONFIG_PARAVIRT */
+
+#include <asm-generic/pgtable.h>
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_X86_PGTABLE_H */
# include <asm/pgtable-2level.h>
#endif
-#ifndef CONFIG_PARAVIRT
-/*
- * Rules for using pte_update - it must be called after any PTE update which
- * has not been done using the set_pte / clear_pte interfaces. It is used by
- * shadow mode hypervisors to resynchronize the shadow page tables. Kernel PTE
- * updates should either be sets, clears, or set_pte_atomic for P->P
- * transitions, which means this hook should only be called for user PTEs.
- * This hook implies a P->P protection or access change has taken place, which
- * requires a subsequent TLB flush. The notification can optionally be delayed
- * until the TLB flush event by using the pte_update_defer form of the
- * interface, but care must be taken to assure that the flush happens while
- * still holding the same page table lock so that the shadow and primary pages
- * do not become out of sync on SMP.
- */
-#define pte_update(mm, addr, ptep) do { } while (0)
-#define pte_update_defer(mm, addr, ptep) do { } while (0)
-#endif
-
-/* local pte updates need not use xchg for locking */
-static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
-{
- pte_t res = *ptep;
-
- /* Pure native function needs no input for mm, addr */
- native_pte_clear(NULL, 0, ptep);
- return res;
-}
-
-/*
- * We only update the dirty/accessed state if we set
- * the dirty bit by hand in the kernel, since the hardware
- * will do the accessed bit for us, and we don't want to
- * race with other CPU's that might be updating the dirty
- * bit at the same time.
- */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(vma, address, ptep, entry, dirty) \
-({ \
- int __changed = !pte_same(*(ptep), entry); \
- if (__changed && dirty) { \
- (ptep)->pte_low = (entry).pte_low; \
- pte_update_defer((vma)->vm_mm, (address), (ptep)); \
- flush_tlb_page(vma, address); \
- } \
- __changed; \
-})
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(vma, addr, ptep) ({ \
- int __ret = 0; \
- if (pte_young(*(ptep))) \
- __ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, \
- &(ptep)->pte_low); \
- if (__ret) \
- pte_update((vma)->vm_mm, addr, ptep); \
- __ret; \
-})
-
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(vma, address, ptep) \
-({ \
- int __young; \
- __young = ptep_test_and_clear_young((vma), (address), (ptep)); \
- if (__young) \
- flush_tlb_page(vma, address); \
- __young; \
-})
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- pte_t pte = native_ptep_get_and_clear(ptep);
- pte_update(mm, addr, ptep);
- return pte;
-}
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
-{
- pte_t pte;
- if (full) {
- /*
- * Full address destruction in progress; paravirt does not
- * care about updates and native needs no locking
- */
- pte = native_local_ptep_get_and_clear(ptep);
- } else {
- pte = ptep_get_and_clear(mm, addr, ptep);
- }
- return pte;
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- clear_bit(_PAGE_BIT_RW, &ptep->pte_low);
- pte_update(mm, addr, ptep);
-}
-
/*
* clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
*
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
-#include <asm-generic/pgtable.h>
-
#endif /* _I386_PGTABLE_H */
set_pgd(pgd, __pgd(0));
}
-#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0))
+#define native_ptep_get_and_clear(xp) __pte(xchg(&(xp)->pte, 0))
struct mm_struct;
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
+static inline pte_t native_ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
{
pte_t pte;
if (full) {
pte = *ptep;
*ptep = __pte(0);
} else {
- pte = ptep_get_and_clear(mm, addr, ptep);
+ pte = native_ptep_get_and_clear(ptep);
}
return pte;
}
#define pte_none(x) (!pte_val(x))
#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+#define native_pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) /* FIXME: is this right? */
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((pte_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-struct vm_area_struct;
-
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
-{
- if (!pte_young(*ptep))
- return 0;
- return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
-}
-
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- clear_bit(_PAGE_BIT_RW, &ptep->pte);
-}
-
/*
* Macro to mark a page protection value as "uncacheable".
*/
#define update_mmu_cache(vma,address,pte) do { } while (0)
-/* We only update the dirty/accessed state if we set
- * the dirty bit by hand in the kernel, since the hardware
- * will do the accessed bit for us, and we don't want to
- * race with other CPU's that might be updating the dirty
- * bit at the same time. */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed && __dirty) { \
- set_pte(__ptep, __entry); \
- flush_tlb_page(__vma, __address); \
- } \
- __changed; \
-})
-
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 1) & 0x3f)
#define __swp_offset(x) ((x).val >> 8)
#define kc_offset_to_vaddr(o) \
(((o) & (1UL << (__VIRTUAL_MASK_SHIFT-1))) ? ((o) | (~__VIRTUAL_MASK)) : (o))
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
#define __HAVE_ARCH_PTE_SAME
-#include <asm-generic/pgtable.h>
#endif /* !__ASSEMBLY__ */
#endif /* _X86_64_PGTABLE_H */
projects / linux-2.6 / commitdiff