]> err.no Git - linux-2.6/commitdiff
V4L/DVB (4926): Fix USBVision handling of VIDIOC_QUERYCTRL
authorDwaine Garden <dwainegarden@rogers.com>
Mon, 4 Dec 2006 11:31:11 +0000 (08:31 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Sun, 10 Dec 2006 11:05:43 +0000 (09:05 -0200)
There's a better (and recommended) way for handling VIDIOC_QUERYCTRL.

This patch will fix the issue where the hardware control values were
invalid and stops the SAA7115 module from complaining about invalid values.

saa7115 4-0024: invalid brightness setting 32768
saa7115 4-0024: invalid contrast setting 49152
saa7115 4-0024: invalid hue setting 32768
saa7115 4-0024: invalid saturation setting 32768

Signed-off-by: Dwaine Garden <dwainegarden@rogers.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/usbvision/usbvision-core.c

index da422e7793adf0dcef3e86981e4c9e0e1937d735..f225701f16fd3d7dd11a61b71715047ffa1f8931 100644 (file)
@@ -1,7 +1,7 @@
 /*
  * USB USBVISION Video device driver 0.9.8.3cvs (For Kernel 2.4.19-2.4.32 + 2.6.0-2.6.16)
  *
- * 
+ *
  *
  * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
  *
  * June 2, 2004 - 0.9.6 Dwaine Garden
  *     - Fixed sourceforge.net cvs repository.
  *     - Added #if LINUX_VERSION_CODE > KERNEL_VERSION(2,4,26) for .owner to help compiling under kernels 2.4.x which do not have the i2c v2.8.x updates.
- *     - Added device Hauppauge WinTv-USB III (PAL) FM Model 597 to usbvision.h        
+ *     - Added device Hauppauge WinTv-USB III (PAL) FM Model 597 to usbvision.h
  *
  * July 1, 2004 -0.9.6 Dwaine Garden
  *     - Patch was submitted by Hal Finkel to fix the problem with the tuner not working under kernel 2.6.7.
  *     - Changed usbvision_muxsel to address the problem with black & white s-video output for NT1004 devices with saa7114 video decoder.  Thanks to Emmanuel for the patch and testing.
  *     - Fixed up SECAM devices which could not properly output video.  Changes to usbmuxsel.  Thanks to Emmanuel for the patch and everyone with a SECAM device which help test.
  *     - Removed some commented out code.  Clean up.
- *     - Tried to fix up the annoying empty directories in the sourceforge.net cvs.   Fuck it up again.  8*(   
+ *     - Tried to fix up the annoying empty directories in the sourceforge.net cvs.   Fuck it up again.  8*(
  *
  * November 15, 2004 - 0.9.8 Dwaine Garden
  *     - Release new tar - 0.9.8 on sourceforge.net
  *     - Better support for mythtv.
  *
  * January 2, 2005 - 0.9.8.1cvs Dwaine Garden
- *     - Setup that you can specify which device is used for video.  Default is auto detect next available device number eg.  /dev/videoX  
+ *     - Setup that you can specify which device is used for video.  Default is auto detect next available device number eg.  /dev/videoX
  *     - Setup that you can specify which device is used for radio.  Default is auto detect next available device number eg.  /dev/radioX
  *     - usb_unlink_urb() is deprecated for synchronous unlinks.  Using usb_kill_urb instead.
  *     - usbvision_kvirt_to_pa is deprecated.  Removed.
  * April 20, 2005 - 0.9.8.2cvs Dwaine Garden
  *     - Release lock in usbvision_v4l_read_done.  -Thanks to nplanel for the patch.
  *     - Additional comments to the driver.
- *     - Fixed some spelling mistakes.  8*)    
+ *     - Fixed some spelling mistakes.  8*)
  *
  * April 23, 2005 - 0.9.8.2cvs Joerg Heckenbach
  *     - Found bug in usbvision line counting. Now there should be no spurious lines in the image any longer.
- *     - Swapped usbvision_register_video and usbvision_configure_video to fix problem with PowerOnAtOpen=0. 
+ *     - Swapped usbvision_register_video and usbvision_configure_video to fix problem with PowerOnAtOpen=0.
  *       Thanks to Erwan Velu
  *
  * April 26, 2005 - 0.9.8.2cvs Joerg Heckenbach
  *     - Fixed problem with rmmod module and oppses. Replaced vfree(usbvision->overlay_base) with iounmap(usbvision->overlay_base).
- *     - Added function usb_get_dev(dev) and ; To help with unloading the module multiple times without crashing. 
+ *     - Added function usb_get_dev(dev) and ; To help with unloading the module multiple times without crashing.
  *       (Keep the reference count in kobjects correct)
  *
  * June 14, 2005 - 0.9.8.2cvs Dwaine
- *     - Missed a change in saa7113.c for checking kernel version.  Added conditional if's.    
+ *     - Missed a change in saa7113.c for checking kernel version.  Added conditional if's.
  *
  * June 15, 2005 - 0.9.8.2cvs Dwaine
- *     - Added new device WinTV device VendorId 0573 and ProductId 4d29.    
+ *     - Added new device WinTV device VendorId 0573 and ProductId 4d29.
  *     - Hacked some support for newer NT1005 devices.  This devices only seem to have one configuration, not multiple configurations like the NT1004.
  *
  * June 29, 2005 - 0.9.8.2cvs Dwaine
- *     - Added new device WinTV device VendorId 0573 and ProductId 4d37.   
- *     - Because of the first empty entry in usbvision_table, modutils failed to create the necessary entries for modules.usbmap. 
- *       This means hotplug won't work for usbvision.  Thanks to Gary Ng.  
+ *     - Added new device WinTV device VendorId 0573 and ProductId 4d37.
+ *     - Because of the first empty entry in usbvision_table, modutils failed to create the necessary entries for modules.usbmap.
+ *       This means hotplug won't work for usbvision.  Thanks to Gary Ng.
  *     - Sent an e-mail to the maintainer of usb.ids.  New devices identified need to be added.
- *     - Fixed compile error with saa7113 under kernel 2.6.12. 
+ *     - Fixed compile error with saa7113 under kernel 2.6.12.
  *
  * July 6, 2005 - 0.9.8.2cvs Dwaine
- *     - Patch submitted by Gary Ng for two additional procfs entries.  Device Input and Frequency setting.  
+ *     - Patch submitted by Gary Ng for two additional procfs entries.  Device Input and Frequency setting.
  *
  * July 12, 2005 - 0.9.8.2cvs Dwaine
  *     - New tuner identified for some devices it's called TCL_MFPE05.  This tuner uses the same API as tuner 38 in tuner.c.
  *     - Thanks to lynx31 for contacting Hauppage and asking them.
- *     - I have no clue as to which devices use this new tuner, so people will have to contact me and tell me.  
+ *     - I have no clue as to which devices use this new tuner, so people will have to contact me and tell me.
  *
  * July 21, 2005 - 0.9.8.2cvs Dwaine
  *     - Patched usbvision.c with missing ifdef kernversion statement so the module will compile with older kernels and v4l.
  *     -Changed number of bytes for i2c write to 4 as per the NT100X spec sheet.  Thanks to Merlum for finding it.
  *     -Remove the radio option for device Hauppauge WinTV USB device Model 40219 Rev E189.  This device does not have a FM radio.  Thanks to Shadwell.
  *     -Added radio option for device Hauppauge WinTV USB device Model 40219 Rev E189 again.  Just got an e-mail indicating their device has one.  8*)
- *   
+ *
  * Aug 27, 2006 - 0.9.8.3cvs Dwaine
  *     -Changed ifdef statement so the usbvision driver will compile with kernels at 2.6.12.
  *     -Updated readme files for new updated tuner list for v4l devices.
- *      
+ *
  *
  *
  * TODO:
 #define USBVISION_VERSION __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL) " " USBVISION_DRIVER_VERSION_COMMENT
 #define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL)
 
-#include <media/saa7115.h> 
-#include <media/v4l2-common.h> 
+#include <media/saa7115.h>
+#include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include <media/audiochip.h>
 
@@ -427,14 +427,14 @@ enum {
 };
 
 static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
-        { 1, 1,  8, V4L2_PIX_FMT_GREY    , "GREY" },
-        { 1, 2, 16, V4L2_PIX_FMT_RGB565  , "RGB565" },
-        { 1, 3, 24, V4L2_PIX_FMT_RGB24   , "RGB24" },
-        { 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
-        { 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
-        { 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
-        { 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, // 1.5 !
-        { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
+       { 1, 1,  8, V4L2_PIX_FMT_GREY    , "GREY" },
+       { 1, 2, 16, V4L2_PIX_FMT_RGB565  , "RGB565" },
+       { 1, 3, 24, V4L2_PIX_FMT_RGB24   , "RGB24" },
+       { 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
+       { 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
+       { 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
+       { 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, // 1.5 !
+       { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
 };
 
 
@@ -448,11 +448,6 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
 #define DEFAULT_SCRATCH_BUF_SIZE       (0x20000)               // 128kB memory scratch buffer
 static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
 
-static int init_brightness = 128;      // Initalize the brightness of the video device
-static int init_contrast = 192;                // Initalize the contrast of the video device
-static int init_saturation = 128;      // Initalize the staturation mode of the video device
-static int init_hue = 128;             // Initalize the Hue settings of the video device
-
 // Function prototypes
 static int usbvision_restart_isoc(struct usb_usbvision *usbvision);
 static int usbvision_begin_streaming(struct usb_usbvision *usbvision);
@@ -466,9 +461,9 @@ static int usbvision_unrequest_intra (struct usb_usbvision *usbvision);
 static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
 static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision);
 static void usbvision_release(struct usb_usbvision *usbvision);
-static int usbvision_set_input(struct usb_usbvision *usbvision); 
-static int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height); 
-static void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd, void *arg); 
+static int usbvision_set_input(struct usb_usbvision *usbvision);
+static int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
+static void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd, void *arg);
 
 
 // Bit flags (options)
@@ -488,8 +483,8 @@ static int adjustCompression = 1;                   // Set the compression to be adaptive
 static int dga = 1;                                    // Set the default Direct Graphic Access
 static int PowerOnAtOpen = 1;                          // Set the default device to power on at startup
 static int SwitchSVideoInput = 0;                      // To help people with Black and White output with using s-video input.  Some cables and input device are wired differently.
-static int video_nr = -1;                              // Sequential Number of Video Device
-static int radio_nr = -1;                              // Sequential Number of Radio Device
+static int video_nr = -1;                              // Sequential Number of Video Device
+static int radio_nr = -1;                              // Sequential Number of Radio Device
 static int vbi_nr = -1;                                        // Sequential Number of VBI Device
 static char *CustomDevice=NULL;                                // Set as nothing....
 
@@ -515,10 +510,10 @@ MODULE_PARM(adjustCompression, "i");                      // Grab the compression to be adaptive
 MODULE_PARM(dga, "i");                                 // Grab the Direct Graphic Access
 MODULE_PARM(PowerOnAtOpen, "i");                       // Grab the device to power on at startup
 MODULE_PARM(SwitchSVideoInput, "i");                   // To help people with Black and White output with using s-video input.  Some cables and input device are wired differently.
-MODULE_PARM(video_nr, "i");                            // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)                 
+MODULE_PARM(video_nr, "i");                            // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)
 MODULE_PARM(radio_nr, "i");                            // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...)
 MODULE_PARM(vbi_nr, "i");                              // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...)
-MODULE_PARM(CustomDevice, "s");                                // .... CustomDevice
+MODULE_PARM(CustomDevice, "s");                                // .... CustomDevice
 #endif
 
 MODULE_PARM_DESC(flags,        " Set the default Overlay Display mode of the device driver.  Default: 0 (Off)");
@@ -539,7 +534,7 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE(DRIVER_LICENSE);
        MODULE_VERSION(DRIVER_VERSION);
-       MODULE_ALIAS(DRIVER_ALIAS); 
+       MODULE_ALIAS(DRIVER_ALIAS);
 
 #ifdef MODULE
 static unsigned int autoload = 1;
@@ -549,8 +544,8 @@ static unsigned int autoload = 0;
 
 
 /****************************************************************************************/
-/* SYSFS Code - Copied from the stv680.c usb module.                                   */
-/* Device information is located at /sys/class/video4linux/video0                      */
+/* SYSFS Code - Copied from the stv680.c usb module.                                   */
+/* Device information is located at /sys/class/video4linux/video0                      */
 /* Device parameters information is located at /sys/module/usbvision                    */
 /* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber    */
 /****************************************************************************************/
@@ -567,79 +562,79 @@ static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd)
 static ssize_t show_version(struct class_device *cd, char *buf)
 {
        return sprintf(buf, "%s\n", DRIVER_VERSION);
-} 
+}
 static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
 
 static ssize_t show_model(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString);
-} 
+}
 static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
 
 static ssize_t show_hue(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%d\n", usbvision->hue >> 8);
-} 
+}
 static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
 
 static ssize_t show_contrast(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%d\n", usbvision->contrast >> 8);
-} 
+}
 static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
 
 static ssize_t show_brightness(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%d\n", usbvision->brightness >> 8);
-} 
+}
 static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
 
 static ssize_t show_saturation(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%d\n", usbvision->saturation >> 8);
-} 
+}
 static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
 
 static ssize_t show_streaming(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%s\n", YES_NO(usbvision->streaming));
-} 
+}
 static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
 
 static ssize_t show_overlay(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%s\n", YES_NO(usbvision->overlay));
-} 
+}
 static CLASS_DEVICE_ATTR(overlay, S_IRUGO, show_overlay, NULL);
 
 static ssize_t show_compression(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
-} 
+}
 static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
 
 static ssize_t show_device_bridge(struct class_device *class_dev, char *buf)
 {
-       struct video_device *vdev = to_video_device(class_dev); 
-       struct usb_usbvision *usbvision = video_get_drvdata(vdev);      
+       struct video_device *vdev = to_video_device(class_dev);
+       struct usb_usbvision *usbvision = video_get_drvdata(vdev);
        return sprintf(buf, "%d\n", usbvision->bridgeType);
-} 
+}
 static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
 
 static void usbvision_create_sysfs(struct video_device *vdev)
@@ -1195,9 +1190,9 @@ void usbvision_osd_stats(struct usb_usbvision *usbvision,
  *
  * Parameters:
  * fullframe:   if TRUE then entire frame is filled, otherwise the procedure
- *             continues from the current scanline.
+ *             continues from the current scanline.
  * pmode       0: fill the frame with solid blue color (like on VCR or TV)
- *             1: Draw a colored grid
+ *             1: Draw a colored grid
  *
  */
 void usbvision_testpattern(struct usb_usbvision *usbvision, int fullframe,
@@ -1608,7 +1603,7 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 
        if (overlay) {
                frame  = &usbvision->overlay_frame;
-               imageSize = frame->frmwidth * frame->frmheight; 
+               imageSize = frame->frmwidth * frame->frmheight;
                if (usbvision->overlay_base == NULL) {
                        //video_buffer is not set yet
                        return ParseState_NextFrame;
@@ -1618,26 +1613,26 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
        }
        else {
                frame  = &usbvision->frame[usbvision->curFrameNum];
-               imageSize = frame->frmwidth * frame->frmheight;                                 
+               imageSize = frame->frmwidth * frame->frmheight;
                if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
                     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) )
-               {       // this is a planar format 
-                                                                      //... v4l2_linesize not used here.
+               {       // this is a planar format
+                                                                      //... v4l2_linesize not used here.
                        f = frame->data + (frame->width * frame->curline);
-               } else 
+               } else
                        f = frame->data + (frame->v4l2_linesize * frame->curline);
-               
+
                if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers
-                                                                // get base of u and b planes add halfoffset
-                       
-                       u = frame->data 
-                               + imageSize     
+                                                                // get base of u and b planes add halfoffset
+
+                       u = frame->data
+                               + imageSize
                                + (frame->frmwidth >>1) * frame->curline ;
                        v = u + (imageSize >>1 );
-                       
+
                } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
-                       
-                       v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ; 
+
+                       v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
                        u = v + (imageSize >>2) ;
                }
        }
@@ -1687,7 +1682,7 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
                return ParseState_NextFrame;
        }
 
-       bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+       bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
        clipmask_index = frame->curline * MAX_FRAME_WIDTH;
 
        scratch_get(usbvision, StripData, StripLen);
@@ -1723,7 +1718,7 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
        if (BlockPos > StripLen) {
                usbvision->stripLenErrors++;
        }
-       
+
        for (Idx = 0; Idx < IdxEnd; Idx++) {
                if((overlay) && (clipped_pixel(clipmask_index))) {
                        f += bytes_per_pixel;
@@ -1741,15 +1736,15 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
                }
                else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
                        *f++ = Y [Idx];
-                       if ( !((  Idx & 0x01  ) | (  frame->curline & 0x01  )) ){ 
-                           
+                       if ( !((  Idx & 0x01  ) | (  frame->curline & 0x01  )) ){
+
 /*                              only need do this for 1 in 4 pixels */
 /*                              intraframe buffer is YUV420 format */
 
                                *u++ = U[Idx >>1];
                                *v++ = V[Idx >>1];
                        }
-                       
+
                }
                else {
                        YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv);
@@ -1780,12 +1775,12 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
                }
                clipmask_index++;
        }
-       /* Deal with non-integer no. of bytes for YUV420P */ 
-       if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 ) 
-               *pcopylen += frame->v4l2_linesize; 
-       else 
-               *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;  
-  
+       /* Deal with non-integer no. of bytes for YUV420P */
+       if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
+               *pcopylen += frame->v4l2_linesize;
+       else
+               *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
+
        frame->curline += 1;
 
        if (frame->curline >= frame->frmheight) {
@@ -1846,7 +1841,7 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
        /* Make sure there's enough data for the entire line */
        /* In this mode usbvision transfer 3 bytes for every 2 pixels */
        /* I need two lines to decode the color */
-       bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+       bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
        stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
        clipmask_even_index = frame->curline * MAX_FRAME_WIDTH;
        clipmask_odd_index  = clipmask_even_index + MAX_FRAME_WIDTH;
@@ -2276,7 +2271,7 @@ static void usbvision_isocIrq(struct urb *urb, struct pt_regs *regs)
   urb->iso_frame_desc[i].status = 0;
   urb->iso_frame_desc[i].actual_length = 0;
  }
-       urb->status = 0;
+       urb->status = 0;
        urb->dev = usbvision->dev;
        errCode = usb_submit_urb (urb, GFP_ATOMIC);
 
@@ -2562,10 +2557,10 @@ static int attach_inform(struct i2c_client *client)
        }
        if ((usbvision->have_tuner) && (usbvision->tuner_type != -1)) {
                tun_addr.mode_mask = T_ANALOG_TV;
-                tun_addr.type = usbvision->tuner_type;
-                tun_addr.addr = ADDR_UNSET;
-                client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
-                
+               tun_addr.type = usbvision->tuner_type;
+               tun_addr.addr = ADDR_UNSET;
+               client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_addr);
+
                call_i2c_clients(usbvision, VIDIOC_S_INPUT, &usbvision->input.index);
        }
        // FIXME : need to add a call VIDIOC_S_CTRL for each control
@@ -2733,7 +2728,7 @@ static int usbvision_i2c_write(void *data, unsigned char addr, char *buf,
        int retval;
        int wrcount = 0;
        int count;
-       int maxLen = 4;
+       int maxLen = 4;
        struct usb_usbvision *usbvision = (struct usb_usbvision *) data;
 
        while (len > 0) {
@@ -2841,7 +2836,7 @@ static int usbvision_init_i2c(struct usb_usbvision *usbvision)
                                break;
                }
                if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
-                       request_module("tuner");
+                       request_module("tuner");
                }
        }
 #endif
@@ -3001,7 +2996,7 @@ static int usbvision_set_output(struct usb_usbvision *usbvision, int width,
        }
 
        if (usbvision->input.std & V4L2_STD_625_50) {
-               frameDrop = frameRate * 32 / 25 - 1;
+               frameDrop = frameRate * 32 / 25 - 1;
        }
        else if (usbvision->input.std & V4L2_STD_525_60) {
                frameDrop = frameRate * 32 / 30 - 1;
@@ -3042,7 +3037,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
        value[2] = 0x00;    // Reg.46 Force intra mode on all new frames
        value[3] = 0x00;    // Reg.47 FORCE_UP <- 0 normal operation (not force)
        value[4] = 0xA2;    // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode.
-        value[5] = 0x00;    // Reg.49 DVI_YUV This has nothing to do with compression
+       value[5] = 0x00;    // Reg.49 DVI_YUV This has nothing to do with compression
 
        //catched values for NT1004
        // value[0] = 0xFF; // Never apply intra mode automatically
@@ -3196,7 +3191,7 @@ static int usbvision_set_input(struct usb_usbvision *usbvision)
                dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv & 0xff;
        }
        else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
-        /* This changes as the fine sync control changes. Further investigation necessary */
+       /* This changes as the fine sync control changes. Further investigation necessary */
                dvi_yuv_value = 0x06;
        }
 
@@ -3313,7 +3308,7 @@ static void usbvision_powerOffTimer(unsigned long data)
        del_timer(&usbvision->powerOffTimer);
        INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off, usbvision);
        (void) schedule_work(&usbvision->powerOffWork);
-       
+
 }
 
 
@@ -3421,7 +3416,7 @@ static int usbvision_setup(struct usb_usbvision *usbvision)
        usbvision_set_input(usbvision);
        usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT);
        usbvision_restart_isoc(usbvision);
-       
+
        /* cosas del PCM */
        return USBVISION_IS_OPERATIONAL(usbvision);
 }
@@ -3532,12 +3527,12 @@ static void usbvision_stop_isoc(struct usb_usbvision *usbvision)
                usb_kill_urb(usbvision->sbuf[bufIdx].urb);
                usb_free_urb(usbvision->sbuf[bufIdx].urb);
                usbvision->sbuf[bufIdx].urb = NULL;
-        }
+       }
 
 
        PDEBUG(DBG_ISOC, "%s: streaming=0\n", __FUNCTION__);
        usbvision->streaming = 0;
-                       
+
 
        if (!usbvision->remove_pending) {
 
@@ -3615,7 +3610,7 @@ static int usbvision_new_frame(struct usb_usbvision *usbvision, int framenum)
 static int usbvision_muxsel(struct usb_usbvision *usbvision, int channel, int norm)
 {
        int mode[4];
-       int audio[]= {1, 0, 0, 0};      
+       int audio[]= {1, 0, 0, 0};
        struct v4l2_routing route;
        //channel 0 is TV with audiochannel 1 (tuner mono)
        //channel 1 is Composite with audio channel 0 (line in)
@@ -3636,7 +3631,7 @@ static int usbvision_muxsel(struct usb_usbvision *usbvision, int channel, int no
 
        // set the new channel
        // Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
-       // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red 
+       // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
 
        switch (usbvision_device_data[usbvision->DevModel].Codec) {
                case CODEC_SAA7113:
@@ -3646,10 +3641,10 @@ static int usbvision_muxsel(struct usb_usbvision *usbvision, int channel, int no
                        else {
                                mode[2] = 7;
                        }
-                       if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { 
+                       if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
                                mode[0] = 0; mode[1] = 2; mode[3] = 3;  // Special for four input devices
                        }
-                       else {  
+                       else {
                                mode[0] = 0; mode[1] = 2; //modes for regular saa7113 devices
                        }
                        break;
@@ -3748,7 +3743,7 @@ static int usbvision_v4l2_open(struct inode *inode, struct file *file)
                                err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size);
                                errCode = -ENOMEM;
                        }
-                       
+
                }
                if (errCode) {
                        /* Have to free all that memory */
@@ -3940,8 +3935,8 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                                case 0:
                                        if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
                                                strcpy(vi->name, "White Video Input");
-                                       } 
-                                       else {  
+                                       }
+                                       else {
                                                strcpy(vi->name, "Television");
                                                vi->type = V4L2_INPUT_TYPE_TUNER;
                                                vi->audioset = 1;
@@ -3950,30 +3945,30 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                                        }
                                        break;
                                case 1:
-                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
+                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
                                        if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
                                                strcpy(vi->name, "Green Video Input");
-                                       } 
-                                       else {  
+                                       }
+                                       else {
                                                strcpy(vi->name, "Composite Video Input");
                                        }
                                        vi->std = V4L2_STD_PAL;
                                        break;
                                case 2:
-                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
+                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
                                        if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
                                                strcpy(vi->name, "Yellow Video Input");
-                                       } 
-                                       else {  
+                                       }
+                                       else {
                                        strcpy(vi->name, "S-Video Input");
                                        }
                                        vi->std = V4L2_STD_PAL;
                                        break;
                                case 3:
-                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
+                                       vi->type = V4L2_INPUT_TYPE_CAMERA;
                                        strcpy(vi->name, "Red Video Input");
                                        vi->std = V4L2_STD_PAL;
-                                       break; 
+                                       break;
                        }
                        PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x", vi->name, vi->index, vi->tuner,vi->type,(int)vi->std);
                        return 0;
@@ -4008,13 +4003,13 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        }
                        return 0;
                }
-               case VIDIOC_G_INPUT:
+               case VIDIOC_G_INPUT:
                {
                        int *input = arg;
                        *input = usbvision->input.index;
                        return 0;
                }
-               case VIDIOC_S_INPUT:
+               case VIDIOC_S_INPUT:
                {
                        int *input = arg;
                        if ((*input >= usbvision->video_inputs) || (*input < 0) )
@@ -4028,14 +4023,14 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        up(&usbvision->lock);
                        return 0;
                }
-               case VIDIOC_G_STD:
+               case VIDIOC_G_STD:
                {
                        v4l2_std_id *std = arg;
                        *std = usbvision->input.std;
                        PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%x", (unsigned)*std);
                        return 0;
                }
-               case VIDIOC_S_STD:
+               case VIDIOC_S_STD:
                {
                        v4l2_std_id *std = arg;
 
@@ -4049,7 +4044,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%x", (unsigned)*std);
                        return 0;
                }
-               case VIDIOC_G_TUNER:
+               case VIDIOC_G_TUNER:
                {
                        struct v4l2_tuner *vt = arg;
                        struct v4l2_tuner status;
@@ -4118,55 +4113,35 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        // FIXME: void function ???
                        return 0;
                }
-               case VIDIOC_QUERYCTRL:
+               case VIDIOC_QUERYCTRL:
                {
-                       struct v4l2_queryctrl *qc = arg;
-                       switch(qc->id) {
-                       case V4L2_CID_BRIGHTNESS:
-                       case V4L2_CID_HUE:
-                       case V4L2_CID_SATURATION:
-                       case V4L2_CID_CONTRAST:
-                       case V4L2_CID_AUDIO_VOLUME:
-                       case V4L2_CID_AUDIO_MUTE:
-                               return v4l2_ctrl_query_fill_std(qc);
-                               break;
-                       default:
+                       struct v4l2_queryctrl *ctrl = arg;
+                       int id=ctrl->id;
+
+                       memset(ctrl,0,sizeof(*ctrl));
+                       ctrl->id=id;
+
+                       i2c_clients_command(&usbvision->i2c_adap, cmd, arg);
+
+                       if (ctrl->type)
+                               return 0;
+                       else
                                return -EINVAL;
-                       }
-                       return 0;
+
+                       PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
                }
                case VIDIOC_G_CTRL:
                {
                        struct v4l2_control *ctrl = arg;
 
-                       switch (ctrl->id) {
-                       case V4L2_CID_BRIGHTNESS:
-                               ctrl->value = usbvision->brightness;
-                               break;
-                       case V4L2_CID_CONTRAST:
-                               ctrl->value = usbvision->contrast;
-                               break;
-                       case V4L2_CID_SATURATION:
-                               ctrl->value = usbvision->saturation;
-                               break;
-                       case V4L2_CID_HUE:
-                               ctrl->value = usbvision->hue;
-                               break;
-                       case V4L2_CID_AUDIO_VOLUME:
-                               /*      ctrl->value = usbvision->volume; */
-                               break;
-                       case V4L2_CID_AUDIO_MUTE:
-                               ctrl->value = usbvision->AudioMute;
-                               break;
-                       default:
-                               return -EINVAL;
-                       }
-                       PDEBUG(DBG_IOCTL, "VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+                       PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+                       call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
                        return 0;
                }
                case VIDIOC_S_CTRL:
                {
                        struct v4l2_control *ctrl = arg;
+
                        PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
                        call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
                        return 0;
@@ -4213,7 +4188,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        vb->sequence = usbvision->frame_num;
                        return 0;
                }
-               case VIDIOC_QBUF: // VIDIOCMCAPTURE + VIDIOCSYNC
+               case VIDIOC_QBUF: // VIDIOCMCAPTURE + VIDIOCSYNC
                {
                        struct v4l2_buffer *vb = arg;
                        struct usbvision_frame *frame;
@@ -4308,7 +4283,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                case VIDIOC_STREAMON:
                {
                        int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
-                       call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);      
+                       call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);
                        return 0;
                }
                case VIDIOC_STREAMOFF:
@@ -4323,7 +4298,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        up(&usbvision->lock);
                        return 0;
                }
-               case VIDIOC_G_FBUF:
+               case VIDIOC_G_FBUF:
                {
                        struct v4l2_framebuffer *vb = arg;
 
@@ -4389,7 +4364,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        if ( (dga == 0) &&
                             (vfd->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
                             (usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
-                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) { 
+                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
                                return -EINVAL;
                        }
                        if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
@@ -4403,11 +4378,11 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                case VIDIOC_G_FMT:
                {
                        struct v4l2_format *vf = arg;
-      
+
                        if ( (dga == 0) &&
                             (vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
                             (usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
-                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) { 
+                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
                                return -EINVAL;
                        }
                        down(&usbvision->lock);
@@ -4417,7 +4392,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                               vf->fmt.win.w.left, vf->fmt.win.w.top, vf->fmt.win.w.width, vf->fmt.win.w.height, vf->fmt.win.chromakey, vf->fmt.win.clipcount);
                        return 0;
                }
-               case VIDIOC_S_FMT:
+               case VIDIOC_S_FMT:
                {
                        struct v4l2_format *vf = arg;
                        struct v4l2_clip *vc=NULL;
@@ -4426,7 +4401,7 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                        if ( (dga == 0) &&
                             (vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) &&
                             (usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
-                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) { 
+                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
                                return -EINVAL;
                        }
                        if(vf->type == V4L2_BUF_TYPE_VIDEO_OVERLAY) {
@@ -4518,10 +4493,10 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
                case VIDIOC_OVERLAY:
                {
                        int *v = arg;
-      
+
                        if ( (dga == 0) &&
                             (usbvision->palette.format != V4L2_PIX_FMT_YVU420) &&
-                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) { 
+                            (usbvision->palette.format != V4L2_PIX_FMT_YUV422P) ) {
                                PDEBUG(DBG_IOCTL, "VIDIOC_OVERLAY  DGA disabled");
                                return -EINVAL;
                        }
@@ -4609,7 +4584,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char *buf,
                goto usbvision_v4l2_read_done;
        }
        PDEBUG(DBG_IO, "Waiting frame grabbing");
-       rc = wait_event_interruptible(frame->wq, (frame->grabstate == FrameState_Done) || 
+       rc = wait_event_interruptible(frame->wq, (frame->grabstate == FrameState_Done) ||
                                                 (frame->grabstate == FrameState_Error));
        if (rc) {
                goto usbvision_v4l2_read_done;
@@ -4670,11 +4645,11 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
        pos = (unsigned long) usbvision->fbuf;
        while (size > 0) {
-               
+
 // Really ugly....
-       #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)                           //Compatibility for 2.6.10+ kernels
+       #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)                           //Compatibility for 2.6.10+ kernels
                page = vmalloc_to_pfn((void *)pos);
-               if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { 
+               if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
                        return -EAGAIN;
                }
        #else                                                                      //Compatibility for 2.6.0 - 2.6.9 kernels
@@ -4791,7 +4766,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                /***************************
                 * V4L2 IOCTLs             *
                 ***************************/
-               case VIDIOC_QUERYCAP:
+               case VIDIOC_QUERYCAP:
                {
                        struct v4l2_capability *vc=arg;
                        memset(vc, 0, sizeof(struct v4l2_capability));
@@ -4803,7 +4778,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_RIO, "%s: VIDIOC_QUERYCAP", __FUNCTION__);
                        return 0;
                }
-               case VIDIOC_QUERYCTRL:
+               case VIDIOC_QUERYCTRL:
                {
                        struct v4l2_queryctrl *qc = arg;
                        switch(qc->id)
@@ -4817,7 +4792,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                                }
                        return 0;
                }
-                       case VIDIOC_G_CTRL:
+               case VIDIOC_G_CTRL:
                {
                        struct v4l2_control *ctrl = arg;
                        PDEBUG(DBG_IOCTL, "VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
@@ -4833,7 +4808,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        }
                        return 0;
                }
-               case VIDIOC_S_CTRL:
+               case VIDIOC_S_CTRL:
                {
                        struct v4l2_control *ctrl = arg;
                        call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
@@ -4841,7 +4816,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_RIO, "%s: VIDIOC_S_CTRL id=%x value=%x", __FUNCTION__,ctrl->id,ctrl->value);
                        return 0;
                }
-               case VIDIOC_G_TUNER:
+               case VIDIOC_G_TUNER:
                {
                        struct v4l2_tuner *vt = arg;
 
@@ -4862,7 +4837,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_RIO, "%s: VIDIOC_G_TUNER signal=%d", __FUNCTION__, vt->signal);
                        return 0;
                }
-               case VIDIOC_S_TUNER:
+               case VIDIOC_S_TUNER:
                {
                        struct v4l2_tuner *vt = arg;
 
@@ -4873,7 +4848,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_RIO, "%s: VIDIOC_S_TUNER", __FUNCTION__);
                        return 0;
                }
-               case VIDIOC_G_AUDIO:
+               case VIDIOC_G_AUDIO:
                {
                        struct v4l2_audio *va = arg;
                        memset(va,0, sizeof(va));
@@ -4882,7 +4857,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO");
                        return 0;
                }
-               case VIDIOC_S_AUDIO:
+               case VIDIOC_S_AUDIO:
                {
                        struct v4l2_audio *v = arg;
                        if(v->index) {
@@ -4892,7 +4867,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        // FIXME: void function ???
                        return 0;
                }
-               case VIDIOC_G_FREQUENCY:
+               case VIDIOC_G_FREQUENCY:
                {
                        struct v4l2_frequency *freq = arg;
                        freq->tuner = 0; // Only one tuner
@@ -4901,7 +4876,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                        PDEBUG(DBG_RIO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
                        return 0;
                }
-               case VIDIOC_S_FREQUENCY:
+               case VIDIOC_S_FREQUENCY:
                {
                        struct v4l2_frequency *freq = arg;
                        usbvision->freq = freq->frequency;
@@ -4913,7 +4888,7 @@ static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
                /***************************
                 * V4L1 IOCTLs             *
                 ***************************/
-               case VIDIOCGCAP:
+               case VIDIOCGCAP:
                {
                        struct video_capability *vc = arg;
 
@@ -5227,18 +5202,8 @@ static void usbvision_configure_video(struct usb_usbvision *usbvision)
 
        if (usbvision == NULL)
                return;
-               
-       model = usbvision->DevModel;
 
-       RESTRICT_TO_RANGE(init_brightness, 0, 255);
-       RESTRICT_TO_RANGE(init_contrast, 0, 255);
-       RESTRICT_TO_RANGE(init_saturation, 0, 255);
-       RESTRICT_TO_RANGE(init_hue, 0, 255);
-       
-       usbvision->saturation = init_saturation << 8;
-       usbvision->hue = init_hue << 8;
-       usbvision->brightness = init_brightness << 8;
-       usbvision->contrast = init_contrast << 8;
+       model = usbvision->DevModel;
        usbvision->depth = 24;
        usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
 
@@ -5393,7 +5358,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision)
                }
                usbvision->vbi = NULL;
        }
-       
+
        // Radio Device:
        if (usbvision->rdev) {
                PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f);
@@ -5444,7 +5409,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
                }
                info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f);
        }
-       // vbi Device: 
+       // vbi Device:
        if (usbvision_device_data[usbvision->DevModel].vbi) {
                usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI");
                if (usbvision->vdev == NULL) {
@@ -5575,10 +5540,10 @@ static int __devinit usbvision_probe(struct usb_interface *intf, const struct us
        /* Is it an USBVISION video dev? */
        model = 0;
        for(model = 0; usbvision_device_data[model].idVendor; model++) {
-               if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) { 
+               if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) {
                        continue;
                }
-               if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) { 
+               if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) {
                        continue;
                }
 
@@ -5607,7 +5572,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf, const struct us
        }
 
        usb_get_dev(dev);
-       
+
        if ((usbvision = usbvision_alloc(dev)) == NULL) {
                err("%s: couldn't allocate USBVision struct", __FUNCTION__);
                return -ENOMEM;
@@ -5617,7 +5582,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf, const struct us
        }
        else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") {
                usbvision->bridgeType = BRIDGE_NT1005;
-       }               
+       }
        else {
                usbvision->bridgeType = BRIDGE_NT1003;
        }
@@ -5649,7 +5614,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf, const struct us
 
 
        usb_set_intfdata (intf, usbvision);
-       usbvision_create_sysfs(usbvision->vdev);        
+       usbvision_create_sysfs(usbvision->vdev);
 
        PDEBUG(DBG_PROBE, "success");
        return 0;
@@ -5724,7 +5689,7 @@ void customdevice_process(void)
        if(CustomDevice)
        {
                char *parse=CustomDevice;
-       
+
                PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice);
 
                /*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1"
@@ -5743,9 +5708,9 @@ void customdevice_process(void)
                usbvision_device_data[0].X_Offset;
                usbvision_device_data[0].Y_Offset;
                usbvision_device_data[0].Dvi_yuv;
-               usbvision_device_data[0].ModelString;
+               usbvision_device_data[0].ModelString;
                */
-               
+
                rmspace(parse);
                usbvision_device_data[0].ModelString="USBVISION Custom Device";
 
@@ -5852,12 +5817,12 @@ static int __init usbvision_init(void)
        PDEBUG(DBG_FUNC, "FUNC    debugging is enabled");
        PDEBUG(DBG_I2C,  "I2C     debugging is enabled");
 
-       /* disable planar mode support unless compression enabled */ 
-       if (isocMode != ISOC_MODE_COMPRESS ) { 
+       /* disable planar mode support unless compression enabled */
+       if (isocMode != ISOC_MODE_COMPRESS ) {
                // FIXME : not the right way to set supported flag
                usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
                usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
-       } 
+       }
 
        customdevice_process();