dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
}
-static int ehci_run (struct usb_hcd *hcd)
+/* one-time init, only for memory state */
+static int ehci_init(struct usb_hcd *hcd)
{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 temp;
int retval;
u32 hcc_params;
- int first;
-
- /* skip some things on restart paths */
- first = (ehci->watchdog.data == 0);
- if (first) {
- init_timer (&ehci->watchdog);
- ehci->watchdog.function = ehci_watchdog;
- ehci->watchdog.data = (unsigned long) ehci;
- }
+
+ spin_lock_init(&ehci->lock);
+
+ init_timer(&ehci->watchdog);
+ ehci->watchdog.function = ehci_watchdog;
+ ehci->watchdog.data = (unsigned long) ehci;
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
- if (first && (retval = ehci_mem_init (ehci, GFP_KERNEL)) < 0)
+ if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
/* controllers may cache some of the periodic schedule ... */
- hcc_params = readl (&ehci->caps->hcc_params);
- if (HCC_ISOC_CACHE (hcc_params)) // full frame cache
+ hcc_params = readl(&ehci->caps->hcc_params);
+ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 8;
else // N microframes cached
- ehci->i_thresh = 2 + HCC_ISOC_THRES (hcc_params);
+ ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
ehci->reclaim = NULL;
ehci->reclaim_ready = 0;
ehci->next_uframe = -1;
- /* controller state: unknown --> reset */
-
- /* EHCI spec section 4.1 */
- if ((retval = ehci_reset (ehci)) != 0) {
- ehci_mem_cleanup (ehci);
- return retval;
- }
- writel (ehci->periodic_dma, &ehci->regs->frame_list);
-
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
* its dummy is used in hw_alt_next of many tds, to prevent the qh
* from automatically advancing to the next td after short reads.
*/
- if (first) {
- ehci->async->qh_next.qh = NULL;
- ehci->async->hw_next = QH_NEXT (ehci->async->qh_dma);
- ehci->async->hw_info1 = cpu_to_le32 (QH_HEAD);
- ehci->async->hw_token = cpu_to_le32 (QTD_STS_HALT);
- ehci->async->hw_qtd_next = EHCI_LIST_END;
- ehci->async->qh_state = QH_STATE_LINKED;
- ehci->async->hw_alt_next = QTD_NEXT (ehci->async->dummy->qtd_dma);
- }
- writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
-
- /*
- * hcc_params controls whether ehci->regs->segment must (!!!)
- * be used; it constrains QH/ITD/SITD and QTD locations.
- * pci_pool consistent memory always uses segment zero.
- * streaming mappings for I/O buffers, like pci_map_single(),
- * can return segments above 4GB, if the device allows.
- *
- * NOTE: the dma mask is visible through dma_supported(), so
- * drivers can pass this info along ... like NETIF_F_HIGHDMA,
- * Scsi_Host.highmem_io, and so forth. It's readonly to all
- * host side drivers though.
- */
- if (HCC_64BIT_ADDR (hcc_params)) {
- writel (0, &ehci->regs->segment);
-#if 0
-// this is deeply broken on almost all architectures
- if (!dma_set_mask (hcd->self.controller, DMA_64BIT_MASK))
- ehci_info (ehci, "enabled 64bit DMA\n");
-#endif
- }
+ ehci->async->qh_next.qh = NULL;
+ ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma);
+ ehci->async->hw_info1 = cpu_to_le32(QH_HEAD);
+ ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT);
+ ehci->async->hw_qtd_next = EHCI_LIST_END;
+ ehci->async->qh_state = QH_STATE_LINKED;
+ ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma);
/* clear interrupt enables, set irq latency */
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
* make problems: throughput reduction (!), data errors...
*/
if (park) {
- park = min (park, (unsigned) 3);
+ park = min(park, (unsigned) 3);
temp |= CMD_PARK;
temp |= park << 8;
}
- ehci_info (ehci, "park %d\n", park);
+ ehci_dbg(ehci, "park %d\n", park);
}
- if (HCC_PGM_FRAMELISTLEN (hcc_params)) {
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
/* periodic schedule size can be smaller than default */
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
case 0: ehci->periodic_size = 1024; break;
case 1: ehci->periodic_size = 512; break;
case 2: ehci->periodic_size = 256; break;
- default: BUG ();
+ default: BUG();
}
}
+ ehci->command = temp;
+
+ ehci->reboot_notifier.notifier_call = ehci_reboot;
+ register_reboot_notifier(&ehci->reboot_notifier);
+
+ return 0;
+}
+
+/* start HC running; it's halted, ehci_init() has been run (once) */
+static int ehci_run (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ int retval;
+ u32 temp;
+ u32 hcc_params;
+
+ /* EHCI spec section 4.1 */
+ if ((retval = ehci_reset(ehci)) != 0) {
+ unregister_reboot_notifier(&ehci->reboot_notifier);
+ ehci_mem_cleanup(ehci);
+ return retval;
+ }
+ writel(ehci->periodic_dma, &ehci->regs->frame_list);
+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+ /*
+ * hcc_params controls whether ehci->regs->segment must (!!!)
+ * be used; it constrains QH/ITD/SITD and QTD locations.
+ * pci_pool consistent memory always uses segment zero.
+ * streaming mappings for I/O buffers, like pci_map_single(),
+ * can return segments above 4GB, if the device allows.
+ *
+ * NOTE: the dma mask is visible through dma_supported(), so
+ * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+ * Scsi_Host.highmem_io, and so forth. It's readonly to all
+ * host side drivers though.
+ */
+ hcc_params = readl(&ehci->caps->hcc_params);
+ if (HCC_64BIT_ADDR(hcc_params)) {
+ writel(0, &ehci->regs->segment);
+#if 0
+// this is deeply broken on almost all architectures
+ if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
+ ehci_info(ehci, "enabled 64bit DMA\n");
+#endif
+ }
+
+
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
- temp |= CMD_RUN;
- writel (temp, &ehci->regs->command);
- dbg_cmd (ehci, "init", temp);
-
- /* set async sleep time = 10 us ... ? */
+ ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+ ehci->command |= CMD_RUN;
+ writel (ehci->command, &ehci->regs->command);
+ dbg_cmd (ehci, "init", ehci->command);
/*
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
*/
- if (first) {
- ehci->reboot_notifier.notifier_call = ehci_reboot;
- register_reboot_notifier (&ehci->reboot_notifier);
- }
-
hcd->state = HC_STATE_RUNNING;
writel (FLAG_CF, &ehci->regs->configured_flag);
- readl (&ehci->regs->command); /* unblock posted write */
+ readl (&ehci->regs->command); /* unblock posted writes */
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
- "USB %x.%x %s, EHCI %x.%02x, driver %s\n",
+ "USB %x.%x started, EHCI %x.%02x, driver %s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- first ? "initialized" : "restarted",
temp >> 8, temp & 0xff, DRIVER_VERSION);
writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
- if (first)
- create_debug_files (ehci);
+ /* GRR this is run-once init(), being done every time the HC starts.
+ * So long as they're part of class devices, we can't do it init()
+ * since the class device isn't created that early.
+ */
+ create_debug_files(ehci);
return 0;
}
return 0;
}
-/* called by khubd or root hub init threads */
+/* called after powerup, by probe or system-pm "wakeup" */
+static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
+{
+ u32 temp;
+ int retval;
+ unsigned count = 256/4;
+
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability(pdev, 0x0a);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if ((temp & (3 << 13)) == (1 << 13)) {
+ temp &= 0x1fff;
+ ehci->debug = ehci_to_hcd(ehci)->regs + temp;
+ temp = readl(&ehci->debug->control);
+ ehci_info(ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(ehci->hcs_params),
+ (temp & DBGP_ENABLED)
+ ? " IN USE"
+ : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
+ temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
+
+ /* EHCI 0.96 and later may have "extended capabilities" */
+ while (temp && count--) {
+ u32 cap;
+
+ pci_read_config_dword(pdev, temp, &cap);
+ ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff */
+ if (bios_handoff(ehci, temp, cap) != 0)
+ return -EOPNOTSUPP;
+ break;
+ case 0: /* illegal reserved capability */
+ ehci_dbg(ehci, "illegal capability!\n");
+ cap = 0;
+ /* FALLTHROUGH */
+ default: /* unknown */
+ break;
+ }
+ temp = (cap >> 8) & 0xff;
+ }
+ if (!count) {
+ ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
+ return -EIO;
+ }
+
+ /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+ retval = pci_set_mwi(pdev);
+ if (!retval)
+ ehci_dbg(ehci, "MWI active\n");
+
+ ehci_port_power(ehci, 0);
+
+ return 0;
+}
+
+/* called by khubd or root hub (re)init threads; leaves HC in halt state */
static int ehci_pci_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 temp;
- unsigned count = 256/4;
-
- spin_lock_init (&ehci->lock);
+ int retval;
ehci->caps = hcd->regs;
ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
/* NOTE: only the parts below this line are PCI-specific */
switch (pdev->vendor) {
break;
}
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability(pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = readl(&ehci->debug->control);
- ehci_info(ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
- temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword(to_pci_dev(hcd->self.controller),
- temp, &cap);
- ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff(ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_warn(ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
if (ehci_is_TDI(ehci))
ehci_reset(ehci);
- ehci_port_power(ehci, 0);
-
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;
}
}
- /* force HC to halt state */
- return ehci_halt(ehci);
-}
-
-static int ehci_pci_start(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int result = 0;
- struct pci_dev *pdev;
- u16 port_wake;
-
- pdev = to_pci_dev(hcd->self.controller);
-
/* Serial Bus Release Number is at PCI 0x60 offset */
pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
- /* port wake capability, reported by boot firmware */
- pci_read_config_word(pdev, 0x62, &port_wake);
- hcd->can_wakeup = (port_wake & 1) != 0;
-
- /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
- result = pci_set_mwi(pdev);
- if (!result)
- ehci_dbg(ehci, "MWI active\n");
-
- return ehci_run(hcd);
-}
+ /* REVISIT: per-port wake capability (PCI 0x62) currently unused */
-/* always called by thread; normally rmmod */
+ retval = ehci_pci_reinit(ehci, pdev);
-static void ehci_pci_stop(struct usb_hcd *hcd)
-{
- ehci_stop(hcd);
+ /* finish init */
+ return ehci_init(hcd);
}
/*-------------------------------------------------------------------------*/
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned port;
struct usb_device *root = hcd->self.root_hub;
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = -EINVAL;
// maybe restore FLADJ
msleep(100);
/* If CF is clear, we lost PCI Vaux power and need to restart. */
- if (readl(&ehci->regs->configured_flag) != cpu_to_le32(FLAG_CF))
+ if (readl(&ehci->regs->configured_flag) != FLAG_CF)
goto restart;
/* If any port is suspended (or owned by the companion),
*/
(void) ehci_halt(ehci);
(void) ehci_reset(ehci);
- (void) ehci_pci_reset(hcd);
+ (void) ehci_pci_reinit(ehci, pdev);
/* emptying the schedule aborts any urbs */
spin_lock_irq(&ehci->lock);
/* restart; khubd will disconnect devices */
retval = ehci_run(hcd);
- /* here we "know" root ports should always stay powered;
- * but some controllers may lose all power.
- */
+ /* here we "know" root ports should always stay powered */
ehci_port_power(ehci, 1);
return retval;
* basic lifecycle operations
*/
.reset = ehci_pci_reset,
- .start = ehci_pci_start,
+ .start = ehci_run,
#ifdef CONFIG_PM
.suspend = ehci_pci_suspend,
.resume = ehci_pci_resume,
#endif
- .stop = ehci_pci_stop,
+ .stop = ehci_stop,
/*
* managing i/o requests and associated device resources
projects / linux-2.6 / commitdiff