/*
* Add a property to a node
*/
-void prom_add_property(struct device_node* np, struct property* prop)
+int prom_add_property(struct device_node* np, struct property* prop)
{
- struct property **next = &np->properties;
+ struct property **next;
prop->next = NULL;
- while (*next)
+ write_lock(&devtree_lock);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock(&devtree_lock);
+ return -1;
+ }
next = &(*next)->next;
+ }
*next = prop;
+ write_unlock(&devtree_lock);
+
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+
+ return 0;
}
/* I quickly hacked that one, check against spec ! */
/*
* Add a property to a node
*/
-void
+int
prom_add_property(struct device_node* np, struct property* prop)
{
struct property **next = &np->properties;
while (*next)
next = &(*next)->next;
*next = prop;
+
+ return 0;
}
/* I quickly hacked that one, check against spec ! */
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <linux/module.h>
+#include <linux/module.h>
#include <asm/prom.h>
#include <asm/rtas.h>
EXPORT_SYMBOL(get_property);
/*
- * Add a property to a node
+ * Add a property to a node.
*/
-void
+int
prom_add_property(struct device_node* np, struct property* prop)
{
- struct property **next = &np->properties;
+ struct property **next;
prop->next = NULL;
- while (*next)
+ write_lock(&devtree_lock);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock(&devtree_lock);
+ return -1;
+ }
next = &(*next)->next;
+ }
*next = prop;
+ write_unlock(&devtree_lock);
+
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+
+ return 0;
}
#if 0
#include <asm/uaccess.h>
#include <asm/of_device.h>
-#define VERSION "0.6"
+#define VERSION "0.7"
#define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp."
#undef DEBUG_SMU
#ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
#else
#define DPRINTK(fmt, args...) do { } while (0)
#endif
* for now, just hard code that
*/
static struct smu_device *smu;
-
+static DECLARE_MUTEX(smu_part_access);
/*
* SMU driver low level stuff
DPRINTK("SMU: starting cmd %x, %d bytes data\n", cmd->cmd,
cmd->data_len);
- DPRINTK("SMU: data buffer: %02x %02x %02x %02x ...\n",
+ DPRINTK("SMU: data buffer: %02x %02x %02x %02x %02x %02x %02x %02x\n",
((u8 *)cmd->data_buf)[0], ((u8 *)cmd->data_buf)[1],
- ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3]);
+ ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3],
+ ((u8 *)cmd->data_buf)[4], ((u8 *)cmd->data_buf)[5],
+ ((u8 *)cmd->data_buf)[6], ((u8 *)cmd->data_buf)[7]);
/* Fill the SMU command buffer */
smu->cmd_buf->cmd = cmd->cmd;
EXPORT_SYMBOL(smu_present);
-int smu_init (void)
+int __init smu_init (void)
{
struct device_node *np;
u32 *data;
return 0;
}
-struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
+/*
+ * Handling of "partitions"
+ */
+
+static int smu_read_datablock(u8 *dest, unsigned int addr, unsigned int len)
+{
+ DECLARE_COMPLETION(comp);
+ unsigned int chunk;
+ struct smu_cmd cmd;
+ int rc;
+ u8 params[8];
+
+ /* We currently use a chunk size of 0xe. We could check the
+ * SMU firmware version and use bigger sizes though
+ */
+ chunk = 0xe;
+
+ while (len) {
+ unsigned int clen = min(len, chunk);
+
+ cmd.cmd = SMU_CMD_MISC_ee_COMMAND;
+ cmd.data_len = 7;
+ cmd.data_buf = params;
+ cmd.reply_len = chunk;
+ cmd.reply_buf = dest;
+ cmd.done = smu_done_complete;
+ cmd.misc = ∁
+ params[0] = SMU_CMD_MISC_ee_GET_DATABLOCK_REC;
+ params[1] = 0x4;
+ *((u32 *)¶ms[2]) = addr;
+ params[6] = clen;
+
+ rc = smu_queue_cmd(&cmd);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ if (cmd.status != 0)
+ return rc;
+ if (cmd.reply_len != clen) {
+ printk(KERN_DEBUG "SMU: short read in "
+ "smu_read_datablock, got: %d, want: %d\n",
+ cmd.reply_len, clen);
+ return -EIO;
+ }
+ len -= clen;
+ addr += clen;
+ dest += clen;
+ }
+ return 0;
+}
+
+static struct smu_sdbp_header *smu_create_sdb_partition(int id)
+{
+ DECLARE_COMPLETION(comp);
+ struct smu_simple_cmd cmd;
+ unsigned int addr, len, tlen;
+ struct smu_sdbp_header *hdr;
+ struct property *prop;
+
+ /* First query the partition info */
+ smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
+ smu_done_complete, &comp,
+ SMU_CMD_PARTITION_LATEST, id);
+ wait_for_completion(&comp);
+
+ /* Partition doesn't exist (or other error) */
+ if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
+ return NULL;
+
+ /* Fetch address and length from reply */
+ addr = *((u16 *)cmd.buffer);
+ len = cmd.buffer[3] << 2;
+ /* Calucluate total length to allocate, including the 17 bytes
+ * for "sdb-partition-XX" that we append at the end of the buffer
+ */
+ tlen = sizeof(struct property) + len + 18;
+
+ prop = kcalloc(tlen, 1, GFP_KERNEL);
+ if (prop == NULL)
+ return NULL;
+ hdr = (struct smu_sdbp_header *)(prop + 1);
+ prop->name = ((char *)prop) + tlen - 18;
+ sprintf(prop->name, "sdb-partition-%02x", id);
+ prop->length = len;
+ prop->value = (unsigned char *)hdr;
+ prop->next = NULL;
+
+ /* Read the datablock */
+ if (smu_read_datablock((u8 *)hdr, addr, len)) {
+ printk(KERN_DEBUG "SMU: datablock read failed while reading "
+ "partition %02x !\n", id);
+ goto failure;
+ }
+
+ /* Got it, check a few things and create the property */
+ if (hdr->id != id) {
+ printk(KERN_DEBUG "SMU: Reading partition %02x and got "
+ "%02x !\n", id, hdr->id);
+ goto failure;
+ }
+ if (prom_add_property(smu->of_node, prop)) {
+ printk(KERN_DEBUG "SMU: Failed creating sdb-partition-%02x "
+ "property !\n", id);
+ goto failure;
+ }
+
+ return hdr;
+ failure:
+ kfree(prop);
+ return NULL;
+}
+
+/* Note: Only allowed to return error code in pointers (using ERR_PTR)
+ * when interruptible is 1
+ */
+struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
+ int interruptible)
{
char pname[32];
+ struct smu_sdbp_header *part;
if (!smu)
return NULL;
sprintf(pname, "sdb-partition-%02x", id);
- return (struct smu_sdbp_header *)get_property(smu->of_node,
+
+ if (interruptible) {
+ int rc;
+ rc = down_interruptible(&smu_part_access);
+ if (rc)
+ return ERR_PTR(rc);
+ } else
+ down(&smu_part_access);
+
+ part = (struct smu_sdbp_header *)get_property(smu->of_node,
pname, size);
+ if (part == NULL) {
+ part = smu_create_sdb_partition(id);
+ if (part != NULL && size)
+ *size = part->len << 2;
+ }
+ up(&smu_part_access);
+ return part;
+}
+
+struct smu_sdbp_header *smu_get_sdb_partition(int id, unsigned int *size)
+{
+ return __smu_get_sdb_partition(id, size, 0);
}
EXPORT_SYMBOL(smu_get_sdb_partition);
else if (hdr.cmdtype == SMU_CMDTYPE_WANTS_EVENTS) {
pp->mode = smu_file_events;
return 0;
+ } else if (hdr.cmdtype == SMU_CMDTYPE_GET_PARTITION) {
+ struct smu_sdbp_header *part;
+ part = __smu_get_sdb_partition(hdr.cmd, NULL, 1);
+ if (part == NULL)
+ return -EINVAL;
+ else if (IS_ERR(part))
+ return PTR_ERR(part);
+ return 0;
} else if (hdr.cmdtype != SMU_CMDTYPE_SMU)
return -EINVAL;
else if (pp->mode != smu_file_commands)
* and "@10" to it.
*/
+/*
+ * Add a property to a node
+ */
+static struct proc_dir_entry *
+__proc_device_tree_add_prop(struct proc_dir_entry *de, struct property *pp)
+{
+ struct proc_dir_entry *ent;
+
+ /*
+ * Unfortunately proc_register puts each new entry
+ * at the beginning of the list. So we rearrange them.
+ */
+ ent = create_proc_read_entry(pp->name,
+ strncmp(pp->name, "security-", 9)
+ ? S_IRUGO : S_IRUSR, de,
+ property_read_proc, pp);
+ if (ent == NULL)
+ return NULL;
+
+ if (!strncmp(pp->name, "security-", 9))
+ ent->size = 0; /* don't leak number of password chars */
+ else
+ ent->size = pp->length;
+
+ return ent;
+}
+
+
+void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop)
+{
+ __proc_device_tree_add_prop(pde, prop);
+}
+
/*
* Process a node, adding entries for its children and its properties.
*/
struct property *pp;
struct proc_dir_entry *ent;
struct device_node *child;
- struct proc_dir_entry *list = NULL, **lastp;
const char *p;
set_node_proc_entry(np, de);
- lastp = &list;
for (child = NULL; (child = of_get_next_child(np, child));) {
p = strrchr(child->full_name, '/');
if (!p)
ent = proc_mkdir(p, de);
if (ent == 0)
break;
- *lastp = ent;
- ent->next = NULL;
- lastp = &ent->next;
proc_device_tree_add_node(child, ent);
}
of_node_put(child);
* properties are quite unimportant for us though, thus we
* simply "skip" them here, but we do have to check.
*/
- for (ent = list; ent != NULL; ent = ent->next)
+ for (ent = de->subdir; ent != NULL; ent = ent->next)
if (!strcmp(ent->name, pp->name))
break;
if (ent != NULL) {
continue;
}
- /*
- * Unfortunately proc_register puts each new entry
- * at the beginning of the list. So we rearrange them.
- */
- ent = create_proc_read_entry(pp->name,
- strncmp(pp->name, "security-", 9)
- ? S_IRUGO : S_IRUSR, de,
- property_read_proc, pp);
+ ent = __proc_device_tree_add_prop(de, pp);
if (ent == 0)
break;
- if (!strncmp(pp->name, "security-", 9))
- ent->size = 0; /* don't leak number of password chars */
- else
- ent->size = pp->length;
- ent->next = NULL;
- *lastp = ent;
- lastp = &ent->next;
}
- de->subdir = list;
}
/*
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
#ifdef CONFIG_PPC32
/*
/*
* Partition info commands
*
- * I do not know what those are for at this point
+ * These commands are used to retreive the sdb-partition-XX datas from
+ * the SMU. The lenght is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ * - 0..1 : partition address
+ * - 2 : a byte containing the partition ID
+ * - 3 : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
*/
#define SMU_CMD_PARTITION_COMMAND 0x3e
+#define SMU_CMD_PARTITION_LATEST 0x01
+#define SMU_CMD_PARTITION_BASE 0x02
+#define SMU_CMD_PARTITION_UPDATE 0x03
/*
* Fan control
*
- * This is a "mux" for fan control commands, first byte is the
- * "sub" command.
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
*/
#define SMU_CMD_FAN_COMMAND 0x4a
#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN"
#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW"
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC 0xd8
+
/* Misc commands
*
* This command seem to be a grab bag of various things
* Misc commands
*
* This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retreive partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ * byte 0: subcommand code (0x02)
+ * byte 1: 0x04 (always, I don't know what it means, maybe the address
+ * space to use or some other nicety. It's hard coded in OF)
+ * byte 2..5: SMU address of the chunk (big endian 32 bits)
+ * byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
*/
#define SMU_CMD_MISC_ee_COMMAND 0xee
#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
__u8 flags;
};
-/*
- * 32 bits integers are usually encoded with 2x16 bits swapped,
- * this demangles them
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
*/
-#define SMU_U32_MIX(x) ((((x) << 16) & 0xffff0000u) | (((x) >> 16) & 0xffffu))
+#define SMU_U16_MIX(x) le16_to_cpu(x);
+#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
/* This is the definition of the SMU sdb-partition-0x12 table (called
* CPU F/V/T operating points in Darwin). The definition for all those
* SMU tables should be moved to some separate file
*/
-#define SMU_SDB_FVT_ID 0x12
+#define SMU_SDB_FVT_ID 0x12
struct smu_sdbp_fvt {
__u32 sysclk; /* Base SysClk frequency in Hz for
- * this operating point
+ * this operating point. Value need to
+ * be unmixed with SMU_U32_MIX()
*/
__u8 pad;
__u8 maxtemp; /* Max temp. supported by this
__u16 volts[3]; /* CPU core voltage for the 3
* PowerTune modes, a mode with
- * 0V = not supported.
+ * 0V = not supported. Value need
+ * to be unmixed with SMU_U16_MIX()
*/
};
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID 0x21
+
+struct smu_sdbp_cpuvcp {
+ __u16 volt_scale; /* u4.12 fixed point */
+ __s16 volt_offset; /* s4.12 fixed point */
+ __u16 curr_scale; /* u4.12 fixed point */
+ __s16 curr_offset; /* s4.12 fixed point */
+ __s32 power_quads[3]; /* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID 0x18
+
+struct smu_sdbp_cpudiode {
+ __u16 m_value; /* u1.15 fixed point */
+ __s16 b_value; /* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID 0x78
+
+struct smu_sdbp_slotspow {
+ __u16 pow_scale; /* u4.12 fixed point */
+ __s16 pow_offset; /* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID 0x25
+
+struct smu_sdbp_sensortree {
+ u8 model_id;
+ u8 unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID 0x17
+
+struct smu_sdbp_cpupiddata {
+ u8 unknown1;
+ u8 target_temp_delta;
+ u8 unknown2;
+ u8 history_len;
+ s16 power_adj;
+ u16 max_power;
+ s32 gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID 0x05
+
#ifdef __KERNEL__
/*
* This returns the pointer to an SMU "sdb" partition data or NULL
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
__u8 cmd; /* SMU command byte */
+ __u8 pad[3]; /* padding */
__u32 data_len; /* Lenght of data following */
};
extern int machine_is_compatible(const char *compat);
extern unsigned char *get_property(struct device_node *node, const char *name,
int *lenp);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
extern void prom_get_irq_senses(unsigned char *, int, int);
extern int prom_n_addr_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_size_cells(struct device_node* np);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern void prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_add_property(struct device_node* np, struct property* prop);
#endif /* _PPC64_PROM_H */
/*
* proc_devtree.c
*/
+#ifdef CONFIG_PROC_DEVICETREE
struct device_node;
+struct property;
extern void proc_device_tree_init(void);
-#ifdef CONFIG_PROC_DEVICETREE
extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
-#else /* !CONFIG_PROC_DEVICETREE */
-static inline void proc_device_tree_add_node(struct device_node *np, struct proc_dir_entry *pde)
-{
- return;
-}
+extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
#endif /* CONFIG_PROC_DEVICETREE */
extern struct proc_dir_entry *proc_symlink(const char *,
projects / linux-2.6 / commitdiff