--- /dev/null
++2008-12-09 Filippo Giunchedi <filippo@debian.org>
++
++ * tools/queue_rss.py: Added, generates RSS feeds of NEW.
++
+2008-12-09 Philipp Kern <pkern@debian.org>
+
+ * daklib/queue.py (cross_suite_version_check): add an additional
+ parameter to specify if an upload is sourceful or not; do not reject
+ uploads that do not satisfy the "must be newer than" criteria and
+ are binary-only
+ * daklib/queue.py (check_source_against_db, check_binary_against_db):
+ invoke cross_suite_version_check as above
+
+2008-12-04 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (recheck): call reject for
+ Upload.check_{binary,source}_against_db with an empty prefix to not
+ reject on warnings
+
+2008-11-30 Philipp Kern <pkern@debian.org>
+
+ * dak/process_unchecked.py (do_stableupdate, do_oldstableupdate):
+ move files to NEW for {old,}stable-proposed-updates world-readable
+ (Closes: #368056)
+
+2008-11-30 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/apt.conf: Lets generate experimental content
+ files.
+
+ * dak/daklib/queue.py (Upload.cross_suite_version_check): Add a
+ few () to make cross_suite_version_check finally work as
+ intended (well, we hope). Thanks to Philipp Kern for spotting this.
+
+2008-11-28 Mark Hymers <mhy@debian.org>
+
+ * dak/new_security_install.py: Don't attempt to delete the .changes files
+ which have already been moved to queue/done by now.
+
+2008-11-27 Mark Hymers <mhy@debian.org>
+
+ * dak/new_security_install.py: Attempt to tidy up the buildd queue. The
+ buildd team believes that the fact that the packages are in the security
+ pool after this point should be good enough.
+
+2008-11-25 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (queue_(un)embargo): (Hopefully) enable
+ sending mails again, which got broken when testing-security
+ handling was (not completly correctly) implemented. Closes: #440004
+
+2008-11-24 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (check_signed_by_key): remove the
+ binary-upload restriction stuff. unused.
+
+ * config/debian-security/apt.conf.buildd: byebye sarge
+
+ * scripts/nfu/get-w-b-db: remove m68k
+
+ * scripts/debian/update-ftpstats: remove m68k
+
+ * config/debian/dak.conf: remove m68k
+ remove the binary-upload-restrictions
+
+ * config/debian/vars (archs): Remove m68k
+
+2008-11-23 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (check_files): fix this armel mess
+
+ * config/debian-security/dak.conf: Set ValidTime
+
+ * config/debian-security/cron.weekly: Added
+
+2008-11-17 Joerg Jaspert <joerg@debian.org>
+
+ * dak/security-install.py: Removed, no longer in use.
+
+2008-11-16 Joerg Jaspert <joerg@debian.org>
+
+ * scripts/debian/mkfilesindices: useless typical, doesnt have
+ i18n/ dirs. Force them in (i hope).
+
+2008-11-15 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/show_deferred.py: handle uploads that do not close bugs
+
+2008-11-11 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/dak.conf: good bye oldstable/o-p-u
+
+2008-11-10 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.unchecked: how about us ignoring bugs.d.o
+ down? It's not like it is time critical or something to transfer
+ this stuff, it doesn't hurt to have it there a bit later...
+
+2008-11-08 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.hourly: Create new tracefile format.
+
+2008-11-05 Joerg Jaspert <joerg@debian.org>
+
+ * dak/new_security_install.py (_do_Approve): This sudo call
+ definitely wants the -H option.
+
+2008-11-01 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (check_files): Also check the
+ upload_suite for uploads. I guess we could kill the default_suite
+ totally, but for now we just look into the upload_suite one too.
+
+ * config/debian-security/dak.conf: Let DefaultSuite be stable
+
+2008-10-27 Joerg Jaspert <joerg@debian.org>
+
+ * scripts/debian/mkfilesindices: Remove oldstable
+
+ * config/debian/vars: Remove sarge
+
+ * config/debian/dak.conf: Untouchable o-p-u, until we removed all
+ of sarge and its files.
+
+ * config/debian/apt.conf.oldstable: Removed
+
+ * config/debian/apt.conf: Remove oldstable
+
+2008-10-14 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/show_deferred.py: produce .changes and improve status
+
+2008-10-07 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: Only keep the last 60 days of
+ dinstall logfiles on disc.
+
+2008-10-05 Thomas Viehmann <tv@beamnet.de>
+
+ * daklib/database.py: added get_suites
+ * dak/dak.py, dak/show_deferred.py: add show-deferred to dak.
+
+2008-09-23 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/dak.conf: Add the validtime fields, set to 7
+ days.
+
+ * dak/generate_releases.py (main): Add a "Valid-Until" line into
+ our release files, meaning "$receiver shouldn't trust this files
+ after that date". Should be used by apt and similar tools to
+ detect some kind of MITM attacks, see #499897
+
+2008-09-21 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.hourly: Generate the DEFERRED queue
+ overview.
+
+2008-09-13 Philipp Kern <pkern@debian.org>
+
+ * dak/queue.py (dump_vars): make .dak u,g=rw,o=r; James'
+ assumption (as stated in 2002-05-18's ChangeLog entry)
+ was that people will use the information therein albeit
+ it is "just" a duplication of information present in
+ other control files; people should still not use it
+ as source of information but access to those files makes
+ dak debugging easier and there is no leak of sensitive
+ information involved
+
+2008-09-12 Philipp Kern <pkern@debian.org>
+
+ * dak/new_security_install.py (actually_upload): remove
+ oldstable-security/amd64 check; Etch, as the next oldstable,
+ already had proper amd64 support
+
+2008-09-12 Joerg Jaspert <joerg@debian.org>
+
+ * scripts/debian/update-pseudopackages.sh: s/i/file/
+
+2008-09-11 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/pseudo-packages.description, ...maintainers:
+ Removed, now with the bts people
+
+ * scripts/debian/update-pseudopackages.sh: Added, fetching
+ pseudo-packages from new bts location
+
+ * scripts/debian/mkmaintainers: Use new location
+
+2008-09-08 Philipp Kern <pkern@debian.org>
+
+ * dak/check_archive.py (check_checksums): rewind the files
+ before the sha1sum/sha256sum checks as they got seeked by
+ md5sum
+
+ * daklib/utils.py (build_file_list): do not die on very
+ old dsc files without format header
+
+2008-09-07 Philipp Kern <pkern@debian.org>
+
+ * daklib/utils.py (check_hash): try..except..finally only
+ works on python >=2.5.
+
+ * dak/process_accepted.py (install): better use dsc_file
+ instead of the (for the loop iteration) static file
+ variable
+
+2008-09-07 Philipp Kern <pkern@debian.org>
+
+ * daklib/utils.py (check_hash): change the comment and warn
+ if a file is not found when checking the hashes (i.e. when
+ it is probably in the pool)
+
+ * daklib/utils.py (check_size): do not bail out if the file
+ is not found, because it may be in the pool
+
+ * dak/process_accepted.py (install): bail out and skip the
+ upload when ensure_hashes fails, print the rejection messages
+ as warnings
+
+2008-08-28 Philipp Kern <pkern@debian.org>
+
+ * daklib/utils.py (check_hashes): adapt to different API, check
+ sizes separately
+
+ * daklib/utils.py (parse_changes, parse_deb822): refactor
+ the string-based logic of parse_changes into a new function
+ parse_deb822; parse_changes itself remains file-based
+
+ * daklib/utils.py (hash_key): gives the key of a hash in the
+ files dict
+
+ * daklib/utils.py (create_hash, check_size): made more readable
+
+ * daklib/utils.py (check_hash): just check the hashes and complain
+ about missing checksums
+
+ * daklib/utils.py (check_hash_fields): function to reject unknown
+ checksums fields
+
+ * daklib/utils.py (_ensure_changes_hash, _ensure_dsc_hash): helper
+ functions for ensure_hashes; check their corresponding manifests'
+ hashes
+
+ * daklib/utils.py (ensure_hashes): retrieve the checksums fields
+ from the original filecontents blob so that they do not need to
+ be present in the .dak; refactored the actual checks by calling
+ the aforementioned helper functions
+
+ * daklib/utils.py (parse_checksums): parse a given checksums field
+ in a manifest and insert the values found into the files dict,
+ checking the file sizes on the way
+
+2008-09-06 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (is_source_in_queue_dir): Access the right
+ variable to check if the given entry in the queue is the sourceful
+ upload we are looking for.
+
+2008-09-02 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/pseudo-packages.description: Added debian-i18n and
+ buildd.emdebian.org
+
+ * dak/process_new.py (_accept): Fix Philipps new helper function
+ to not break by moving Upload.build_summaries there.
+
+2008-08-31 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (_accept): new helper function to accept
+ an upload regularly, obeying no-action if set
+ * dak/process_new.py (do_accept): use _accept
+ * dak/process_new.py (do_accept_stableupdate): bail out in else
+ on binary uploads, in case we missed something; use the _accept
+ helper
+
+2008-08-30 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (is_source_in_queue_dir): join the queue path
+ because os.listdir entries come with their path stripped
+
+2008-08-30 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (do_accept_stableupdate): state what we intend
+ to do
+
+2008-08-26 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (is_source_in_queue_dir): fix variable usage
+ * dak/process_new.py (move_to_holding): just state what we intend
+ to do in no-action mode
+ * dak/process_new.py (do_accept_stableupdate): fetch summaries,
+ fix invokation of is_source_in_queue_dir, actually accept sourceful
+ uploads in p-u holding
+
+2008-08-26 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (do_accept): do not try to free the unchecked
+ lockfile in no-action mode
+
+2008-08-16 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: We dont want i18n to ever fail
+ dinstall, add a || true
+
+2008-08-15 Mark Hymers <mhy@debian.org>
+
+ * daklib/utils.py: Actually import a module before using it.
+
+ * daklib/utils.py: Actually check we have basedict before trying to
+ use it.
+
+ * dak/process_accepted.py, dak/process_unchecked.py,
+ daklib/database.py: Don't change get_files_id to use sha1sum and
+ sha256sum.
+
+ * setup/init_pool.sql, dak/check_archive.py, dak/decode_dot_dak.py,
+ dak/process_accepted.py, dak/process_unchecked.py, daklib/database.py,
+ daklib/queue.py, daklib/utils.py: Attempt to add sha1sum and
+ sha256sums into the database. The complication is that we have to
+ keep backwards compatibility with the .dak files already in existance.
+ Note that import_archive hasn't been hacked to deal with this yet.
+
+2008-08-14 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: Added the i18n retrieval of package
+ description translations
+
+2008-08-12 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: Complicate the i18n export a little
+ by using date/hour based directories which we then link into the
+ web view. They contain a signed timestamp file now, which means
+ the i18n people can take a long time to generate files, yet we
+ still know exactly on which dataset their data is based on, and
+ can then verify it with that. Ensures we only get descriptions for
+ packages we know off (or knew of in the past 2 days).
+
+2008-08-11 Joerg Jaspert <joerg@debian.org>
+
+ * web/dinstall.html: Added
+
+ * config/debian/dak.conf: Added back the pgp keyrings for now, as
+ it seems that we should keep it for a few more days, until we
+ somehow got ll those oldtimers to get a newer key into the
+ keyring. Unfortunately our logic to look for uploads done from
+ that keyring wasnt the most perfect one, so well, it is actually
+ used. Damn.
+
+2008-08-09 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/dak.conf: No longer use the pgp keyring - no
+ uploads recorded for any of the pgp keys for a long time.
+
+ * config/debian/cron.dinstall: Export the i18n foo.
+
+2008-08-08 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: Create a hardlinked tree of the
+ ftp/ in mirror/ so we have more atomic mirror updates for the
+ buildds
+
+ * config/debian/cron.unchecked: Added signing of buildd incoming
+
+2008-08-07 Philipp Kern <pkern@debian.org>
+
+ * dak/process_new.py (do_accept): handle uploads to (oldstable-)
+ proposed-updates differently and put them into p-u holding
+ for review instead of unconditionally accepting them into
+ p-u proper; additional care needed to be taken to look
+ out for the source if a binary-only upload is being handled
+
+2008-08-07 Joerg Jaspert <joerg@debian.org>
+
+ * dak/cruft_report.py (parse_nfu): call utils.warn instead of warn
+ (main): Only do the nfu stuff if nfu is a check we want to run
+ later.
+ (main): And another place where we dont want to do nfu foo unless
+ we need nfu
+
+ * dak/make_suite_file_list.py (main): Fix a bug that has been
+ there for ages, but "just" never triggered.
+
+2008-08-07 Stephen Gran <sgran@debian.org>
+
+ * Drop use of exec to eval variable interpolation
+2008-08-07 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_accepted.py (install): Error out with the new
+ exception if we dont know the source package for a file we want to
+ install. Shouldn't ever hit us, but better safe than sorry.
+
+ * daklib/dak_exceptions.py (dakerrors): new exception - no source field.
+
+2008-08-05 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.unchecked: disable the ssh-move insanity (and
+ as soon as rietz is back online - replace it with a one-line scp
+ or rsync statement followed by a one-line rm)
+ And now replaced this 128 line perl "not-invented-here" with a
+ one-line rsync command, using a feature rsync only understands
+ since sarge - damn new-fangled technology.
+
+2008-08-05 Joachim Breitner <nomeata@debian.org>
+
+ * dak/cruft_report.py: In full mode, report out-of-date binaries on
+ architectures that have set Not-For-Us for that package.
+
+ * scripts/nfu/get-w-b-db: Script to fetch the wanna-build database
+ dump from http://buildd.debian.org/
+
+ * config/debian/cron.weekly: Run the above script
+
+2008-08-03 Mark Hymers <mhy@debian.org>
+
+ * dak/process_new.py: Apply jvw's patch so that process_new shows
+ packages which need binary uploads sorted earlier than other packages.
+
+2008-07-26 Joerg Jaspert <joerg@debian.org>
+
+ * templates/reject-proposed-updates.rejected,dak/reject_proposed_updates.py:
+ applied a patch by luk modifying the stable rejection mails to fit
+ reality a bit more
+
+ * config/debian/dak.conf: no m68k in testing, so no m68k in t-p-u
+ r4 now
+
+2008-06-19 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/process_unchecked.py (check_dsc,check_hashes): Catch
+ UnknownFormatError and reject
+
+2008-06-15 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.weekly: Work around a git bug until git is
+ fixed upstream and the fix is on backports.org
+
+ * config/debian/cron.dinstall: (various ssh calls): Make them use
+ batchmode/connect/setuptimeout to not take too long with
+ connections... Also || true them, no need to die in dinstall if
+ one host isn't reachable.
+ Also do not die when the ldap server is unreachable, just ignore
+ that error.
+
+ * README: Updated mailing list location
+
+2008-06-14 Otavio Salvador <otavio@debian.org>
+
+ * docs/manpages/clean-suites.1.sgml: Minor typo fix
+
+ * dak/import_archive.py: Add support to udeb packages
+
+ * dak/control_suite.py (main): Handle SystemError exception in
+ case of a incompatible commandline parameter
+
+ * dak/check_overrides.py (main): Use case-insensitive comparing
+ for codename
+
+2008-06-14 Joerg Jaspert <joerg@debian.org>
+
+ * scripts/debian/byhand-task: Merged patch from Frans Pop to
+ fail on byhand-task uploads if they do not go to unstable.
+
+ * config/debian/cron.weekly: Do a little git cleanup work too.
+
+ * config/debian/cron.buildd: Add batchmode and also
+ Connect/SetupTimeout parameters to ssh
+
+ * config/debian/cron.dinstall (POSTDUMP): Compress all
+ uncompressed psql backups
+
+2008-06-08 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (check_urgency): Lowercase urgency
+ before we (eventually) warn on it. Patch taken from Russ Allbery.
+
+2008-06-01 Otavio Salvador <otavio@debian.org>
+
+ * daklib/queue.py (check_valid): allow debian-installer specific
+ sources to have 'debian-installer' section.
+
+2008-05-28 Frans Pop <fjp@debian.org>
+
+ * add autobyhand support for task overrides (from tasksel)
+
+2008-05-27 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/pseudo-packages.maintainers: Change ftp.debian.org
+ pseudopackage maintainer name.
+
+2008-05-12 Joerg Jaspert <joerg@debian.org>
+
+ * dak/transitions.py: use yaml.dump instead of syck.dump, as syck
+ seems to have a bug in its dump(), causing it to write illegal entries
+ And also do this for load.
+
+2008-05-10 Stephen Gran <sgran@debian.org>
+ * tools/debianqueued-0.9/debianqueued: First pass at a send_mail
+ implementation that sucks less
+ * Update debian/control to reflect new perl dependency
+
+2008-05-09 Joerg Jaspert <joerg@debian.org>
+
+ * dak/override.py (main): substitute value in X-Debian-Package
+ header
+
+ * templates/override.bug-close: Add X-Debian-Package header
+ * templates/reject-proposed-updates.rejected: dito
+ * templates/queue.rejected: dito
+ * templates/process-unchecked.new: dito
+ * templates/process-unchecked.bug-nmu-fixed: dito
+ * templates/process-unchecked.bug-experimental-fixed: dito
+ * templates/process-unchecked.bug-close: dito
+ * templates/process-unchecked.announce: dito
+ * templates/process-unchecked.accepted: dito
+ * templates/process-new.prod: dito
+ * templates/process-accepted.unaccept: dito
+ * templates/process-accepted.install: dito
+ * templates/process-unchecked.override-disparity: dito
+
+2008-05-08 Joerg Jaspert <joerg@debian.org>
+
+ * templates/override.bug-close: Add X-Debian header
+ * templates/rm.bug-close: dito
+ * templates/reject-proposed-updates.rejected: dito
+ * templates/queue.rejected: dito
+ * templates/process-unchecked.new: dito
+ * templates/process-unchecked.bug-nmu-fixed: dito
+ * templates/process-unchecked.bug-experimental-fixed: dito
+ * templates/process-unchecked.bug-close: dito
+ * templates/process-unchecked.announce: dito
+ * templates/process-unchecked.accepted: dito
+ * templates/process-new.prod: dito
+ * templates/process-accepted.unaccept: dito
+ * templates/process-accepted.install: dito
+ * templates/process-unchecked.override-disparity: dito, but also
+ mention that people should include the package lists with the
+ override disparities.
+
+2008-05-06 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.dinstall: Put the timestamp stuff into an own
+ function, call that from everywhere. Also change the timestamp
+ format to not be local dependent.
+
+2008-05-05 Joerg Jaspert <joerg@debian.org>
+
+ * daklib/dak_exceptions.py (dakerrors): add TransitionsError
+ * dak/transitions.py: Use it, instead of the own definition
+
+2008-05-05 Mark Hymers <mhy@debian.org>
+
+ * daklib/dak_exceptions.py: Add a default message and tidy up our string
+ representation
+
+2008-05-05 Joerg Jaspert <joerg@debian.org>
+
+ * daklib/dak_exceptions.py: New file, central place for all those
+ own exceptions dak may raise.
+
+ * daklib/utils.py: Use dak_exceptions and delete all those string
+ exception raising stuff, which is depcreated.
+ During that delete the unknown_hostname_exc, as it wasnt used.
+
+ * dak/import_archive.py: use the new Exception class
+ * dak/rm.py: dito
+ * dak/generate_releases.py: dito
+ * dak/queue_report.py: dito
+ * daklib/queue.py: dito
+
+2008-05-04 Joerg Jaspert <joerg@debian.org>
+
+ * daklib/queue.py: Various pychecker cleanups
+
+ * dak/import_keyring.py: Remove unused daklib.logging and Logger
+ and add the actually used daklib/utils
+
+ * dak/examine_package.py: remove daklib.queue import, never used
+
+ * dak/check_proposed_updates.py: Import stuff from daklib as
+ "import daklib.foo as foo"
+ * dak/clean_proposed_updates.py: likewise
+ * dak/clean_queues.py: likewise
+ * dak/clean_suites.py: likewise
+ * dak/compare_suites.py: likewise
+ * dak/cruft_report.py: likewise
+ (get_suite_binaries): Seperated in own function, out of main. More
+ of main should be splitted. (Or well, cruft_report redesigned a
+ little, so its easier to run on multiple suites with differing tests)
+
+ * dak/examine_package.py: likewise
+ * dak/find_null_maintainers.py: likewise
+ * dak/generate_index_diffs.py: likewise
+ * dak/generate_releases.py: likewise
+ * dak/import_archive.py: likewise
+ * dak/import_ldap_fingerprints.py: likewise
+ * dak/import_users_from_passwd.py: likewise
+ * dak/init_db.py: likewise
+ * dak/init_dirs.py: likewise
+ * dak/ls.py: likewise
+ * dak/make_maintainers.py: likewise
+ * dak/make_overrides.py: likewise
+ * dak/make_suite_file_list.py: likewise
+ * dak/new_security_install.py: likewise
+ * dak/override.py: likewise
+ * dak/process_accepted.py: likewise
+ * dak/process_new.py: likewise
+ * dak/process_unchecked.py: likewise
+ * dak/rm.py: likewise
+ * dak/show_new.py: likewise
+ * dak/split_done.py: likewise
+ * dak/stats.py: likewise
+ * dak/transitions.py: likewise
+
+ * dak/check_archive.py (check_files_not_symlinks): Remove
+ long-time unused and commented code. Import stuff from daklib as
+ "import daklib.foo as foo"
+
+2008-05-04 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/process_unchecked.py (check_signed_by_key): cater for uid_email
+ None in sponsor notification
+
+2008-05-03 Joerg Jaspert <joerg@debian.org>
+
+ * dak/examine_package.py: clean up pychecker warnings (merged with
+ Thomas changes to the NEW display)
+
+2008-05-03 Mark Hymers <mhy@debian.org>
+
+ * dak/check_archive.py: clean up pychecker warnings
+ * dak/check_overrides.py: likewise
+ * dak/check_proposed_updates.py: likewise
+ * dak/clean_proposed_updates.py: likewise
+ * dak/clean_queues.py: likewise
+ * dak/control_overrides.py: likewise
+ * dak/control_suite.py: likewise
+ * dak/decode_dot_dak.py: likewise
+ * dak/examine_package.py: likewise
+ * dak/process_new.py: likewise
+ * dak/process_unchecked.py: likewise
+ * dak/queue_report.py: likewise
+ * dak/reject_proposed_updates.py: likewise
+ * dak/security_install.py: likewise
+ * dak/show_new.py: likewise
+ * dak/stats.py: likewise
+ * dak/symlink_dists.py: likewise
+ * dak/transitions.py: likewise
+>>>>>>> sec-merge:ChangeLog
+
+2008-05-03 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/cron.daily: Rename to
+ * config/debian/cron.dinstall: this, as its not really something run
+ daily for some time now. And while dinstall is an OLD name, its
+ recognized pretty well within Debian
+ Also add some more timing information
+ Do not allow automated [o-]p-u-new processing to break dinstall
+
+2008-05-03 Thomas Viehmann <tv@beamnet.de>
+
+ * web/,web/style.css: add web dir and current style.css
+
+ * dak/examine_package.py, dak/show_new.py: improve NEW html pages,
+ based on mock-up by M. Ferrari.
+ remove Checksums-* from examine-package output
+
+2008-05-03 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/process_unchecked.py (check_hashes): Reject on error while
+ parsing Checksums-*.
+
+2008-05-02 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/pseudo-packages*: Removed listarchives, closes #468667
+ added wiki.debian.org (currently pointing to debian-www), closes #194206
+ added security-tracker, closes #436152
+ added release.debian.org, closes #451005
+
+ * config/debian/cron.buildd: Cleanup unreachable code. (If someone
+ still wants it - its in revision control...)
+
+ * config/debian/cron.daily: Modify call to update-ftpstats to only
+ use files log/2*, instead of log/*, so it ignores the new cron/
+ subdir. Makes sure it can't get confused, and is also safe for
+ nearly thousand years. If this code is really in use in year 3000,
+ im sure people can adjust it! :)
+
+ * config/debian/vars: Add logdir as a place for cronjob log output
+
+ * config/debian/cron.daily: Use a logfile and be more verbose of
+ whats going on.
+ Also moved the commented VACUUM ; VACUUM ANALYZE calls over to
+ cron.weekly, ...
+ * config/debian/cron.weekly: likewise,
+ ... and activate those calls again. Once a week, as an
+ additional safety bet to be sure the stuff does get run is ok,
+ even if we have autovacuum by default.
+
+2008-05-02 Thomas Viehmann <tv@beamnet.de>
+
+ * dak/process_unchecked.py (check_hashes): fix typo in
+ checksum reject message.
+
+2008-05-02 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/extensions.py: used reindent.py from the python
+ 2.x source examples to get all dak code use the same indentation
+ style, no longer a mix of 4 spaces / 1 tab.
+ * dak/check_archive.py: likewise
+ * dak/check_overrides.py: likewise
+ * dak/check_proposed_updates.py: likewise
+ * dak/clean_proposed_updates.py: likewise
+ * dak/clean_queues.py: likewise
+ * dak/clean_suites.py: likewise
+ * dak/compare_suites.py: likewise
+ * dak/control_overrides.py: likewise
+ * dak/control_suite.py: likewise
+ * dak/cruft_report.py: likewise
+ * dak/dak.py: likewise
+ * dak/decode_dot_dak.py: likewise
+ * dak/examine_package.py: likewise
+ * dak/find_null_maintainers.py: likewise
+ * dak/generate_index_diffs.py: likewise
+ * dak/generate_releases.py: likewise
+ * dak/import_archive.py: likewise
+ * dak/import_keyring.py: likewise
+ * dak/import_ldap_fingerprints.py: likewise
+ * dak/import_users_from_passwd.py: likewise
+ * dak/init_db.py: likewise
+ * dak/init_dirs.py: likewise
+ * dak/ls.py: likewise
+ * dak/make_maintainers.py: likewise
+ * dak/make_overrides.py: likewise
+ * dak/make_suite_file_list.py: likewise
+ * dak/mirror_split.py: likewise
+ * dak/new_security_install.py: likewise
+ * dak/override.py: likewise
+ * dak/poolize.py: likewise
+ * dak/process_accepted.py: likewise
+ * dak/process_new.py: likewise
+ * dak/process_unchecked.py: likewise
+ * dak/queue_report.py: likewise
+ * dak/reject_proposed_updates.py: likewise
+ * dak/rm.py: likewise
+ * dak/security_install.py: likewise
+ * dak/show_new.py: likewise
+ * dak/split_done.py: likewise
+ * dak/stats.py: likewise
+ * dak/symlink_dists.py: likewise
+ * dak/test/001/test.py: likewise
+ * dak/test/002/test.py: likewise
+ * dak/transitions.py: likewise
+ * daklib/extensions.py: likewise
+ * daklib/logging.py: likewise
+ * daklib/queue.py: likewise
+ * daklib/utils.py: likewise
+ * scripts/debian/insert_missing_changedby.py: likewise
+
+ * dak/process_new.py (recheck): Make the path check more robust,
+ so we no longer have to keep process_new seperate trees between
+ security and normal archive.
+
+2008-04-27 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_accepted.py (Urgency_Log.__init__): Warn if the
+ configured path does not exist or is not writeable by us. Use a
+ tmp path if so, so we do not lose the urgencies in such cases.
+
+ * config/debian/dak.conf: Changed path for UrgencyLog
+ Same for the ReleaseTransitions file
+
+ * config/debian/cron.daily: Notify qa user on merkel of dinstall
+ start, Remove the britney call
+
+2008-04-26 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_new.py: Call end() whenever we try to leave by
+ pressing Q
+
+ * config/debian/cron.daily: Also report NBS in experimental
+
+2008-04-25 Joerg Jaspert <joerg@debian.org>
+
+ * dak/cruft_report.py (main): Make it possible to look at
+ experimental too, especially NBS
+
+ * dak/split_done.py (main): Only move files into their subdirs if
+ they are older than 30 days. That enables us to run this script as
+ part of a cronjob.
+
+ * config/debian/cron.weekly: Run dak split-done
+
+2008-04-23 Thomas Viehmann <tviehmann@debian.org>
+
+ * dak/process_unchecked.py: add changes["sponsoremail"]
+ for sponsored uploads if desired
+ * daklib/queue.py: add changes["sponsoremail"] to
+ Subst["__MAINTAINER_TO__"] if present
+ * daklib/utils.py: add functions
+ is_email_alias to check which accounts allow email forwarding,
+ which_alias_file to find the alias file, and
+ gpg_get_key_addresses to find uid addresses for a given
+ fingerprint
+
+2008-04-22 Joerg Jaspert <joerg@debian.org>
+
+ * setup/init_pool.sql: added a function/aggregate for the release
+ team to base some script on it.
+
+ * config/debian/cron.daily: push katie@merkel to immediately start
+ the sync of projectb there.
+
+2008-04-21 Joerg Jaspert <joerg@debian.org>
+
+ * scripts/debian/expire_dumps: New script, expires old database
+ dumps, using a scheme to keep more of the recent dumps.
+
+ * config/debian/cron.daily: Use the new script. Also - compress
+ all files older than 7 days, instead of 30.
+
+ * dak/process_accepted.py (install): Do not break if a
+ source/maintainer combination is already in src_uploaders, "just"
+ warn us.
+
+2008-04-20 Thomas Viehmann <tviehmann@debian.org>
+
+ * daklib/utils.py (build_file_list): Deal with "Format 3 style"
+ Format lines (ie. those having extra text appended).
+
+2008-04-19 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py (check_files): Sanity check the
+ provides field, which closes #472783
+
+2008-04-18 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/dak.conf: Add mapping stable-proposed-updates
+ -> proposed-updates.
+
+ * dak/transitions.py (load_transitions): Additionally check for
+ invalid package list indentation
+
+2008-04-17 Joerg Jaspert <joerg@debian.org>
+
+ * config/debian/dak.conf: Add TempPath statement for the Release
+ Transitions script
+
+ * dak/transitions.py (temp_transitions_file): Use the TempPath
+ (write_transitions_from_file): Check if the file we should get our
+ transitions from is in our TempPath, error out if it isnt
+ (main): Check for TempPath existance
+
+2008-04-12 James Troup <troup@debian.org>
+
+ * dak/clean_proposed_updates.py: add support for -s/--suite and
+ -n/--no-action.
+
+2008-04-11 Anthony Towns <ajt@debian.org>
+
+ * dak/utils.py: build_file_list() extra parameters so it can
+ build a file list for checksums-foo fields. Don't use float() to
+ compare formats, because Format: 1.10 should compare greater than
+ Format: 1.9 (use "1.9".split(".",1) and tuple comparison instead)
+
+ * dak/process_unchecked.py: check_md5sum becomes check_hashes
+ and check_hash. If changes format is 1.8 or later, also check
+ checksums-sha1 and checksums-sha256 for both .changes and .dsc,
+ and reject on presence/absence of un/expected checksums-* fields.
+
+2008-04-07 Joerg Jaspert <joerg@debian.org>
+
+ * daklib/utils.py (build_file_list): Check for dpkg .changes
+ adjusted to reject newer (and right now broken) 1.8 version, until
+ dpkg (or debsign) is fixed and doesn't produce invalid .changes anymore
+
+2008-03-22 Joerg Jaspert <joerg@debian.org>
+
+ * dak/transitions.py (load_transitions): Check if all our keys are
+ defined, if there are only keys defined we want and also the types
+ of the various keys.
+
+2008-03-22 Anthony Towns <ajt@debian.org>
+
+ * dak/edit_transitions.py: Add --import option.
+ Add --use-sudo option. Use fcntl locking for writing.
+ Move writing into a function (write_transitions).
+ Reinvoke self using sudo and --import if necessary.
+ Move temporary file creation into a function, use mkstemp.
+ Rename to "dak transitions".
+
+2008-03-21 Joerg Jaspert <joerg@debian.org>
+
+ * dak/edit_transitions.py (edit_transitions): Use sudo to copy the
+ edited file back in place
+ (check_transitions): Use proper locking and also use sudo to copy
+ the new file in place
+
+2008-03-21 Anthony Towns <ajt@debian.org>
+
+ * config/debian/extensions.py: Add infrastructure for replacing
+ functions in dak modules; add upload blocking for dpkg.
+
+2008-03-12 Joerg Jaspert <joerg@debian.org>
+
+ * dak/edit_transitions.py: Done a number of cleanups to make code
+ working. Also changed the way prompting/answering goes, to not
+ have to import daklib/queue.
+ (edit_transitions): When done with a successful edit - also print
+ a final overview about defined transitions
+
+2008-03-11 Joerg Jaspert <joerg@debian.org>
+
+ * dak/process_unchecked.py: Import syck module directly, not "from
+ syck import *"
+ (check_transition): Do the check for sourceful upload in here
+ Also adjust the syck loading commands, rename new_vers to
+ expected, curvers to current, to make it more clear what they mean.
+
+ * daklib/database.py (get_suite_version): Renamed from
+ get_testing_version. Also changed the cache variables name
+
+ * The above changes are based on modifications from Anthony.
+
+ * dak/dak.py (init): Renamed check -> edit transitions
+
+ * dak/edit_transitions.py: Renamed from check_transitions.py
+ (main): Also rename new_vers/curvers to expected/current
+ Basically a nice rewrite, so it now does checks and edit,
+ depending on how you call it. Check also removes old transitions,
+ if user wants it.
+
+2008-03-02 Joerg Jaspert <joerg@debian.org>
+
+ * debian/control (Suggests): Add python-syck to Depends:
+
+ * dak/dak.py (init): Tell it about check_transitions
+
+ * dak/check_transitions.py (usage): Added, checks the transitions
+ file (if any)
+
+ * daklib/database.py (get_testing_version): Added. Returns the
+ version for the source in testing, if any
+
+ * dak/process_unchecked.py (check_transition): Added. Checks if a
+ release team member defined a transition, and rejects based on
+ that data.
+ (process_it): Use it.
+ (check_transition): Warn on broken transitions file and return,
+ not doing anything.
+ (check_transition): Moved out of here, into daklib/queue
+ (process_it): Call check_transitions only if
+ changes[architecture] has source included.
+ (check_transition): Now call the database.get_testing_version
+
+2008-02-09 Christoph Berg <myon@debian.org>
+
+ * daklib/queue.py (get_type): fubar does not exist in global
+ namespace.
+
+ * setup/add_constraints.sql setup/init_pool.sql: Add changedby column
+ to source table, and move src_uploaders after source so the REFERNCES
+ clause works.
+ * dak/process_accepted.py (install): Fill the changedby column from
+ the information found in the .changes. This will allow to identify
+ NMUs and sponsored uploads more precisely in tools querying projectb.
+ * scripts/debian/insert_missing_changedby.py: Script to import yet
+ missing fields from filippo's uploads-history DB.
+
+2008-02-06 Joerg Jaspert <joerg@debian.org>
+
+ * daklib/utils.py (check_signature): Make variable key available,
+ so we can access it.
+
+2008-01-07 Joerg Jaspert <joerg@debian.org>
+
+ * dak/examine_package.py (check_deb): Remove linda call. It
+ provides no added benefit to lintian anymore.
+
+2008-01-07 Joerg Jaspert <joerg@debian.org>
+
+ * dak/examine_package.py (check_deb): Remove linda call. It
+ provides no added benefit to lintian anymore.
+
+2008-01-06 Joerg Jaspert <joerg@debian.org>
+
+ * dak/examine_package.py (do_lintian): lintian now supports html
+ coloring, so use it.
+ (do_command): Dont escape html chars if param escaped = 1
+
+2008-01-06 Joerg Jaspert <joerg@debian.org>
+
+ * dak/examine_package.py (do_lintian): lintian now supports html
+ coloring, so use it.
+ (do_command): Dont escape html chars if param escaped = 1
+
+2007-12-31 Anthony Towns <ajt@debian.org>
+
+ * dak/process_new.py (recheck): pass "" for prefix_str to reject()
+ when processing result of check_dsc_against_db so we don't promote
+ warnings to rejections.
+
+2007-12-31 Anthony Towns <ajt@debian.org>
+
+ * dak/process_new.py (recheck): pass "" for prefix_str to reject()
+ when processing result of check_dsc_against_db so we don't promote
+ warnings to rejections.
+
+2007-12-30 Joerg Jaspert <joerg@debian.org>
+
+ * dak/dak.py (init): add show-new. This is based on a patch
+ submitted by Thomas Viehmann in Bug #408318, but large parts of
+ handling it are rewritten and show-new is done by me.
+
+ * dak/queue_report.py (table_row): Add link to generated html page
+ for NEW package.
+
+ * dak/show_new.py: new file, generates html overview for NEW
+ packages, similar to what we see with examine-package.
+
+ * config/debian/cron.hourly: Add show-new call
+
+ * config/debian/dak.conf: Add HTMLPath for Show-New
+
+ * dak/examine_package.py (print_copyright): ignore stderr when
+ finding copyright file.
+ (main): add html option
+ (html_escape): new function
+ (escape_if_needed): ditto
+ (headline): ditto
+ (colour_output): ditto
+ (print_escaped_text): ditto
+ (print_formatted_text): ditto
+ - use those functions everywhere where we generate output, as they
+ easily know if we want html or not and just DTRT
+ (do_lintian): new function
+ (check_deb): use it
+ (output_deb_info): Use print_escaped_text, not print_formatted_text.
+ Also import daklib.queue, determine_new now lives there
+
+ Also add a variable to see if we want html output. Default is
+ disabled, show_new enables it for its use.
+ Most of html, besides header/footer are in examine_package instead
+ of show_new, as it makes it a whole lot easier to deal with it at
+ the point the info is generated.
+
+
+ * dak/process_new.py (determine_new): Moved out of here.
+ (check_valid): Moved out of here.
+ (get_type): Moved out of here.
+
+ * daklib/queue.py (determine_new): Moved here.
+ (check_valid): Moved here.
+ (get_type): Moved here.
+
+ * dak/init_db.py (do_section): Remove non-US code
+
+ * dak/make_overrides.py (main): ditto
+
+ * dak/process_new.py (determine_new): ditto
+
+ * daklib/queue.py (Upload.in_override_p),
+ (Upload.check_override): ditto
+
+ * daklib/utils.py (extract_component_from_section):,
+ (poolify): ditto
+
+ * dak/import_archive.py (update_section): ditto
+
+ * dak/symlink_dists.py (fix_component_section): ditto
+
+ * scripts/debian/mkmaintainers: ditto
+
+ * scripts/debian/update-mirrorlists (masterlist): ditto
+
+ * config/debian-non-US/*: Remove subdir
+
+ * scripts/debian/update-readmenonus: Removed.
+
+
+2007-12-30 Joerg Jaspert <joerg@debian.org>
+
+ * dak/dak.py (init): add show-new. This is based on a patch
+ submitted by Thomas Viehmann in Bug #408318, but large parts of
+ handling it are rewritten and show-new is done by me.
+
+ * dak/queue_report.py (table_row): Add link to generated html page
+ for NEW package.
+
+ * dak/show_new.py: new file, generates html overview for NEW
+ packages, similar to what we see with examine-package.
+
+ * config/debian/cron.hourly: Add show-new call
+
+ * config/debian/dak.conf: Add HTMLPath for Show-New
+
+ * dak/examine_package.py (print_copyright): ignore stderr when
+ finding copyright file.
+ (main): add html option
+ (html_escape): new function
+ (escape_if_needed): ditto
+ (headline): ditto
+ (colour_output): ditto
+ (print_escaped_text): ditto
+ (print_formatted_text): ditto
+ - use those functions everywhere where we generate output, as they
+ easily know if we want html or not and just DTRT
+ (do_lintian): new function
+ (check_deb): use it
+ (output_deb_info): Use print_escaped_text, not print_formatted_text.
+ Also import daklib.queue, determine_new now lives there
+
+ Also add a variable to see if we want html output. Default is
+ disabled, show_new enables it for its use.
+ Most of html, besides header/footer are in examine_package instead
+ of show_new, as it makes it a whole lot easier to deal with it at
+ the point the info is generated.
+
+
+ * dak/process_new.py (determine_new): Moved out of here.
+ (check_valid): Moved out of here.
+ (get_type): Moved out of here.
+
+ * daklib/queue.py (determine_new): Moved here.
+ (check_valid): Moved here.
+ (get_type): Moved here.
+
+ * dak/init_db.py (do_section): Remove non-US code
+
+ * dak/make_overrides.py (main): ditto
+
+ * dak/process_new.py (determine_new): ditto
+
+ * daklib/queue.py (Upload.in_override_p),
+ (Upload.check_override): ditto
+
+ * daklib/utils.py (extract_component_from_section):,
+ (poolify): ditto
+
+ * dak/import_archive.py (update_section): ditto
+
+ * dak/symlink_dists.py (fix_component_section): ditto
+
+ * scripts/debian/mkmaintainers: ditto
+
+ * scripts/debian/update-mirrorlists (masterlist): ditto
+
+ * config/debian-non-US/*: Remove subdir
+
+ * scripts/debian/update-readmenonus: Removed.
+
+
+2007-12-28 Anthony Towns <ajt@debian.org>
+
+ * daklib/utils.py (check_signature): add NOTATION_DATA and
+ NOTATION_NAME to known keywords.
+
+ * daklib/queue.py (Upload.check_source_against_db):
+
+ * dak/make_suite_file_list.py: add -f/--force option.
+
+ * dak/generate_releases.py: add -a/--apt-conf=FILE and
+ -f/--force-touch options. Pull version info from the database.
+ Make suite description optional.
+
+ * config/debian/dak.conf: update
+ Reject-Proposed-Updates::MoreInfoURL. Comment out
+ Suite::Stable::Version and ::Description.
+
+ * config/debian/apt.conf: Add hurd-i386 to unstable
+ debian-installer stanza.
+
+2007-12-28 Joerg Jaspert <joerg@debian.org>
+
+ * KEYEXPIRED is actually a known keyword. We do check it earlier
+ on and reject in case the sig is bad (or unknown)
+
+2007-12-28 Anthony Towns <ajt@debian.org>
+
+ * daklib/utils.py (check_signature): add NOTATION_DATA and
+ NOTATION_NAME to known keywords.
+
+ * daklib/queue.py (Upload.check_source_against_db):
+
+ * dak/make_suite_file_list.py: add -f/--force option.
+
+ * dak/generate_releases.py: add -a/--apt-conf=FILE and
+ -f/--force-touch options. Pull version info from the database.
+ Make suite description optional.
+
+ * config/debian/dak.conf: update
+ Reject-Proposed-Updates::MoreInfoURL. Comment out
+ Suite::Stable::Version and ::Description.
+
+ * config/debian/apt.conf: Add hurd-i386 to unstable
+ debian-installer stanza.
+
+2007-12-28 Joerg Jaspert <joerg@debian.org>
+
+ * KEYEXPIRED is actually a known keyword. We do check it earlier
+ on and reject in case the sig is bad (or unknown)
+
+2007-12-24 Joerg Jaspert <joerg@debian.org>
+
+ * Also run lintian on the .dsc file to check the source itself.
+
+ * Fix the direct usage of ar | tar etc to get the copyright file
+ and use dpkg-deb, which is made for this and makes us able to
+ process data.tar.bz2 (or whatever format it will be in the
+ future).
+
+2007-12-24 Joerg Jaspert <joerg@debian.org>
+
+ * Also run lintian on the .dsc file to check the source itself.
+
+ * Fix the direct usage of ar | tar etc to get the copyright file
+ and use dpkg-deb, which is made for this and makes us able to
+ process data.tar.bz2 (or whatever format it will be in the
+ future).
+
+2007-12-21 Joerg Jaspert <joerg@debian.org>
+
+ * Remove the (now useless) check for a pre-depends on dpkg for
+ binaries that contain bzip2 compressed data tarballs.
+
+2007-12-21 Joerg Jaspert <joerg@debian.org>
+
+ * Remove the (now useless) check for a pre-depends on dpkg for
+ binaries that contain bzip2 compressed data tarballs.
+
+2007-08-28 Anthony Towns <ajt@debian.org>
+
+ * process_unchecked.py: Add support for automatic BYHAND
+ processing.
+ * config/debian/dak.conf, scripts/debian/byhand-tag: Automatic
+ processing of tag-overrides.
+ * examine_package.py: Summarise duplicate copyright file entries
+ (same md5sum) with a reference to the previous instance, rather
+ than repeating them.
+ * process_new.py: When rejecting from the p-u-new or o-p-u-new
+ holding queues, don't worry if dak has its own reasons for
+ rejecting the package as well as the SRMs.
+
+2007-08-28 Anthony Towns <ajt@debian.org>
+
+ * process_unchecked.py: Add support for automatic BYHAND
+ processing.
+ * config/debian/dak.conf, scripts/debian/byhand-tag: Automatic
+ processing of tag-overrides.
+ * examine_package.py: Summarise duplicate copyright file entries
+ (same md5sum) with a reference to the previous instance, rather
+ than repeating them.
+ * process_new.py: When rejecting from the p-u-new or o-p-u-new
+ holding queues, don't worry if dak has its own reasons for
+ rejecting the package as well as the SRMs.
+
+2007-06-19 Anthony Towns <ajt@debian.org>
+
+ * Add nm.debian.org pseudopackage
+
+2007-06-19 Anthony Towns <ajt@debian.org>
+
+ * Add nm.debian.org pseudopackage
+
+2007-06-18 Anthony Towns <ajt@debian.org>
+
+ * daklib/logging.py: Set umask to not exclude group-writability
+ so we don't get reminded at the start of each month. Thanks to
+ Random J.
+ * dak/override.py: More changes from Herr von Wifflepuck: warn
+ if section of source is different to binary section; restore
+ functionality on source-only overrides; croak if trying to set
+ priority of a source override; never set priority of source
+ overrides; correct typo in logging (s/priority/section/ at
+ one place)
+
+ * config/debian/apt.conf.oldstable: Added for oldstable point releases.
+ * config/debian/cron.daily: auotmatically accept/reject
+ oldstable-proposed-updates based on COMMENTS directory
+
+2007-06-18 Anthony Towns <ajt@debian.org>
+
+ * config/debian/apt.conf, config/debian/apt.conf.stable,
+ config/debian/dak.conf: update for 4.0r0 (etch), and 3.1r6
+ (sarge), support for oldstable-proposed-updates, dropping m68k
+ from etch, creating etch-m68k suite, creating lenny.
+
+ * config/debian/vars: update for lenny
+
+ * config/debian/dak.conf: typo fix for Dinstall::GPGKeyring,
+ drop upload limitations, add release postgres user
+
+ * dak/process_new.py: support for automatically accepting and rejecting
+ packages from proposed-updates holding queues via COMMENTS directory
+ * cron.daily: automatically process COMMENTS-based approvals
+ and rejections for proposed-updates holding queues
+
+ * dak/process_unchecked.py: add support for oldproposedupdates
+ holding queue
+
+ * dak/control_suite.py: allow control-suite to work with etch-m68k
+
+ * dak/generate_releases.py: unlink old Release files before updating
+ them if nlinks > 1 (ie, if two files used to be the same, maybe they
+ shouldn't be when generate-releases is run)
+
+ * dak/generate_releases.py: add a couple of commented lines to make
+ it easier to deal with point releases
+
+ * dak/make_overrides.py: generate overrides for !contrib udebs
+
+ * docs/README.stable-point-release: update docs for doing a
+ point release
+
+2007-06-18 Anthony Towns <ajt@debian.org>
+
+ * daklib/logging.py: Set umask to not exclude group-writability
+ so we don't get reminded at the start of each month. Thanks to
+ Random J.
+ * dak/override.py: More changes from Herr von Wifflepuck: warn
+ if section of source is different to binary section; restore
+ functionality on source-only overrides; croak if trying to set
+ priority of a source override; never set priority of source
+ overrides; correct typo in logging (s/priority/section/ at
+ one place)
+
+ * config/debian/apt.conf.oldstable: Added for oldstable point releases.
+ * config/debian/cron.daily: auotmatically accept/reject
+ oldstable-proposed-updates based on COMMENTS directory
+
+2007-06-18 Anthony Towns <ajt@debian.org>
+
+ * config/debian/apt.conf, config/debian/apt.conf.stable,
+ config/debian/dak.conf: update for 4.0r0 (etch), and 3.1r6
+ (sarge), support for oldstable-proposed-updates, dropping m68k
+ from etch, creating etch-m68k suite, creating lenny.
+
+ * config/debian/vars: update for lenny
+
+ * config/debian/dak.conf: typo fix for Dinstall::GPGKeyring,
+ drop upload limitations, add release postgres user
+
+ * dak/process_new.py: support for automatically accepting and rejecting
+ packages from proposed-updates holding queues via COMMENTS directory
+ * cron.daily: automatically process COMMENTS-based approvals
+ and rejections for proposed-updates holding queues
+
+ * dak/process_unchecked.py: add support for oldproposedupdates
+ holding queue
+
+ * dak/control_suite.py: allow control-suite to work with etch-m68k
+
+ * dak/generate_releases.py: unlink old Release files before updating
+ them if nlinks > 1 (ie, if two files used to be the same, maybe they
+ shouldn't be when generate-releases is run)
+
+ * dak/generate_releases.py: add a couple of commented lines to make
+ it easier to deal with point releases
+
+ * dak/make_overrides.py: generate overrides for !contrib udebs
+
+ * docs/README.stable-point-release: update docs for doing a
+ point release
+
+2007-03-05 Anthony Towns <ajt@debian.org>
+
+ * config/debian/dak.conf: update for 3.1r5.
+ * scripts/debian/ssh-move: add ssh-move script from debbugs
+ * config/debian/cron.unchecked: push version info to debbugs using
+ ssh-move.
+
+2007-03-05 Anthony Towns <ajt@debian.org>
+
+ * config/debian/dak.conf: update for 3.1r5.
+ * scripts/debian/ssh-move: add ssh-move script from debbugs
+ * config/debian/cron.unchecked: push version info to debbugs using
+ ssh-move.
+
+2007-02-14 James Troup <troup@ries.debian.org>
+
+ * docs/README.config: remove Dinstall::GroupOverrideFilename.
+ * config/debian/dak.conf: likewise.
+ * config/debian-non-US/dak.conf: likewise.
+ * config/debian-security/dak.conf: likewise.
+
+ * daklib/queue.py (Upload.close_bugs): no longer handle NMUs or
+ experimental differently, just close the bugs and let version
+ tracking sort it out.
+ (nmu_p): remove entire class - now unused.
+ (Upload.__init__): don't use nmu_p.
+
+2007-02-14 James Troup <troup@ries.debian.org>
+
+ * docs/README.config: remove Dinstall::GroupOverrideFilename.
+ * config/debian/dak.conf: likewise.
+ * config/debian-non-US/dak.conf: likewise.
+ * config/debian-security/dak.conf: likewise.
+
+ * daklib/queue.py (Upload.close_bugs): no longer handle NMUs or
+ experimental differently, just close the bugs and let version
+ tracking sort it out.
+ (nmu_p): remove entire class - now unused.
+ (Upload.__init__): don't use nmu_p.
+
+2007-02-08 Anthony Towns <ajt@debian.org>
+
+ * config/debian/dak.conf: update for 3.1r4. Use new 'etch'
+ signing key. Drop maximum index diffs down to 14.
+
+ * config/debian/apt.conf: add udeb support for non-free (testing,
+ unstable) and experimental.
+ * config/debian/dak.conf: likewise.
+
+ * dak/generate_releases.py (main): handle udebs in any component.
+
+ * daklib/queue.py (Upload.build_summaries): handle files without a
+ 'type' gracefully.
+
+ * dak/generate_releases.py (print_sha256_files): new function.
+ (main): use it.
+
+ * dak/process_accepted.py (stable_install): fix name of template
+ mail.
+
+ * dak/process_unchecked.py (is_stableupdate): fix invocation of
+ database.get_suite_id().
+
+ * templates/process-new.bxa_notification: Update on request
+ of/after discussion with BIS staff.
+
+ * scripts/debian/mkfilesindices: also handle proposed-updates.
+
+2007-02-08 Ryan Murray <rmurray@debian.org>
+
+ * config/debian/cron.monthly: use $ftpgroup instead of hardcoding
+ group name for chgrp of mail archives.
+
+ * daklib/queue.py (Upload.check_dsc_against_db): handle multiple
+ orig.tar.gz's by picking the first one by file id.
+
+ * dak/override.py (main): limit to binary overrides only for now.
+ (usage): update to match.
+
+ * config/debian/cron.daily: track when we have the accepted lock
+ and clean it up on exit if we have it. Take/check the
+ cron.unchecked lock just before traping to cleanup on exit.
+ Remove potato override handling. Remove any dangling symlinks in
+ /srv/incoming.d.o/buildd. Clean up apt-ftparchive's databases.
+
+ * config/debian/apt.conf: change default compression scheme for
+ both Sources and Packages to gzip and bzip2 rather than
+ uncompressed and gzip (Packages) and gzip (Sources). Use old
+ defaults for proposed-updates.
+
+ * dak/control_overrides.py (main): refuse to operate on
+ untouchable suites.
+
+ * config/debian/pseudo-packages.maintainers: drop install,
+ installation, boot-floppy, slink-cd, potato-cd and
+ nonus.debian.org. Update base.
+ * config/debian/pseudo-packages.description: likewise.
+
+ * daklib/utils.py (re_srchasver): new regex.
+ (parse_changes): use regex to split 'Source (Version)' style
+ Source fields into 'source' and 'source-version'.
+
+ * config/debian/cron.daily: use $base instead of hardcoding path
+ name.
+
+ * scripts/debian/mkfilesindices: source 'vars' file and use it's
+ variables instead of hardcoding path names.
+
+ * config/debian/apt.conf: switch from /org to /srv.
+ * config/debian/apt.conf.buildd: likewise.
+ * config/debian/apt.conf.stable: likewise.
+ * config/debian/cron.daily: likewise.
+ * config/debian/cron.hourly: likewise.
+ * config/debian/cron.monthly: likewise.
+ * config/debian/cron.unchecked: likewise.
+ * config/debian/cron.weekly: likewise.
+ * config/debian/dak.conf: likewise.
+ * config/debian/vars: likewise.
+ * scripts/debian/mkfilesindices: likewise.
+
+2007-02-08 James Troup <james@nocrew.org>
+
+ * dak/process_unchecked.py (check_signed_by_key): new function to
+ ensure .changes files are signed by an authorized uploader.
+ (process_it): use it.
+
+ * config/debian/dak.conf (Binary-Upload-Restrictions): new stanza
+ to configure per suite/component/architecture binary upload
+ restrictions.
+
+2007-02-08 Anthony Towns <ajt@debian.org>
+
+ * config/debian/dak.conf: update for 3.1r4. Use new 'etch'
+ signing key. Drop maximum index diffs down to 14.
+
+ * config/debian/apt.conf: add udeb support for non-free (testing,
+ unstable) and experimental.
+ * config/debian/dak.conf: likewise.
+
+ * dak/generate_releases.py (main): handle udebs in any component.
+
+ * daklib/queue.py (Upload.build_summaries): handle files without a
+ 'type' gracefully.
+
+ * dak/generate_releases.py (print_sha256_files): new function.
+ (main): use it.
+
+ * dak/process_accepted.py (stable_install): fix name of template
+ mail.
+
+ * dak/process_unchecked.py (is_stableupdate): fix invocation of
+ database.get_suite_id().
+
+ * templates/process-new.bxa_notification: Update on request
+ of/after discussion with BIS staff.
+
+ * scripts/debian/mkfilesindices: also handle proposed-updates.
+
+2007-02-08 Ryan Murray <rmurray@debian.org>
+
+ * config/debian/cron.monthly: use $ftpgroup instead of hardcoding
+ group name for chgrp of mail archives.
+
+ * daklib/queue.py (Upload.check_dsc_against_db): handle multiple
+ orig.tar.gz's by picking the first one by file id.
+
+ * dak/override.py (main): limit to binary overrides only for now.
+ (usage): update to match.
+
+ * config/debian/cron.daily: track when we have the accepted lock
+ and clean it up on exit if we have it. Take/check the
+ cron.unchecked lock just before traping to cleanup on exit.
+ Remove potato override handling. Remove any dangling symlinks in
+ /srv/incoming.d.o/buildd. Clean up apt-ftparchive's databases.
+
+ * config/debian/apt.conf: change default compression scheme for
+ both Sources and Packages to gzip and bzip2 rather than
+ uncompressed and gzip (Packages) and gzip (Sources). Use old
+ defaults for proposed-updates.
+
+ * dak/control_overrides.py (main): refuse to operate on
+ untouchable suites.
+
+ * config/debian/pseudo-packages.maintainers: drop install,
+ installation, boot-floppy, slink-cd, potato-cd and
+ nonus.debian.org. Update base.
+ * config/debian/pseudo-packages.description: likewise.
+
+ * daklib/utils.py (re_srchasver): new regex.
+ (parse_changes): use regex to split 'Source (Version)' style
+ Source fields into 'source' and 'source-version'.
+
+ * config/debian/cron.daily: use $base instead of hardcoding path
+ name.
+
+ * scripts/debian/mkfilesindices: source 'vars' file and use it's
+ variables instead of hardcoding path names.
+
+ * config/debian/apt.conf: switch from /org to /srv.
+ * config/debian/apt.conf.buildd: likewise.
+ * config/debian/apt.conf.stable: likewise.
+ * config/debian/cron.daily: likewise.
+ * config/debian/cron.hourly: likewise.
+ * config/debian/cron.monthly: likewise.
+ * config/debian/cron.unchecked: likewise.
+ * config/debian/cron.weekly: likewise.
+ * config/debian/dak.conf: likewise.
+ * config/debian/vars: likewise.
+ * scripts/debian/mkfilesindices: likewise.
+
+2007-02-08 James Troup <james@nocrew.org>
+
+ * dak/process_unchecked.py (check_signed_by_key): new function to
+ ensure .changes files are signed by an authorized uploader.
+ (process_it): use it.
+
+ * config/debian/dak.conf (Binary-Upload-Restrictions): new stanza
+ to configure per suite/component/architecture binary upload
+ restrictions.
+
+2006-10-09 James Troup <james.troup@canonical.com>
+
+ * dak/process_unchecked.py (check_timestamps): change match to
+ search as recent versions of python-apt prefix the string with 'E: '.
+
+2006-10-09 James Troup <james.troup@canonical.com>
+
+ * dak/process_unchecked.py (check_timestamps): change match to
+ search as recent versions of python-apt prefix the string with 'E: '.
+
+2006-06-26 Ryan Murray <rmurray@debian.org>
+
+ * dak/process_unchecked.py (check_files): strip optional source version
+ from Source: field in changes file, and ensure what is left is a valid
+ package name.
+
+2006-06-26 Ryan Murray <rmurray@debian.org>
+
+ * dak/process_unchecked.py (check_files): strip optional source version
+ from Source: field in changes file, and ensure what is left is a valid
+ package name.
+
+2006-06-23 Ryan Murray <rmurray@debian.org>
+
+ * dak/process_unchecked.py (check_files): also check ProposedUpdates
+ queue for source.
+
+2006-06-23 Ryan Murray <rmurray@debian.org>
+
+ * dak/process_unchecked.py (check_files): also check ProposedUpdates
+ queue for source.
+
+2006-06-18 Ryan Murray <rmurray@debian.org>
+
+ * dak/scripts/debian/update-ftpstats: look for dak named processes in
+ the log, too.
+
+ * dak/process_unchecked.py (check_files): only check embargoed and
+ unembargoed queues if the keys are set.
+
+ * dak/config/debian-security/apt.conf: set Packages::Compress to gzip
+ and bzip2 for etch.
+
+2006-06-18 Ryan Murray <rmurray@debian.org>
+
+ * dak/scripts/debian/update-ftpstats: look for dak named processes in
+ the log, too.
+
+ * dak/process_unchecked.py (check_files): only check embargoed and
+ unembargoed queues if the keys are set.
+
+ * dak/config/debian-security/apt.conf: set Packages::Compress to gzip
+ and bzip2 for etch.
+
+2006-06-16 James Troup <james@nocrew.org>
+
+ * dak/dak.py (init): add new-security-install.
+
+ * dak/new_security_install.py: cleanups and adapt for new naming
+ scheme and other changes.
+
+2006-06-16 Anthony Towns <ajt@debian.org>
+
+ * dak/new_security_install.py: initial version imported from
+ klecker.
+
+2006-06-16 James Troup <james@nocrew.org>
+
+ [Merged changes from klecker - original author unknown.]
+
+ * daklib/queue.py (Upload.dump_vars): also save changes["adv id"].
+
+ * dak/security_install.py (do_upload): fix check for oldstable and
+ upload file list handling.
+
+ * dak/process_unchecked.py (check_files): update "check for
+ source" code to also look in Embargoed and Unembargoed queues.
+ (is_unembargo): fix handling of Dir::Queue::Disembargo.
+
+ * dak/decode_dot_dak.py (main): add support for changes["adv id"].
+
+ * config/debian-security/vars (disembargo): add.
+
+ * config/debian-security/dak.conf (Dinstall::SigningKeyIds):
+ update.
+ (Process-Unchecked::AcceptedLockFile): add.
+ (Suite::Testing): clean up Version and Description.
+ (SuiteMappings): add silent map from etch-secure to testing.
+
+ * config/debian-security/cron.unchecked: add support for
+ disembargoed queues.
+
+ * config/debian-security/apt.conf.buildd: add bzip2ed Packages
+ files too.
+
+ * config/debian-security/apt.conf: add amd64 to architectures for
+ testing-security.
+
+2006-06-11 James Troup <troup@spohr.debian.org>
+
+ * config/debian/cron.daily: invoke process-accepted not
+ process-unchecked.
+
+ * config/debian/vars (scriptsdir): new variable.
+ * config/debian/cron.daily: use it.
+
+ * scripts/debian/mkmaintainers: put Maintainers_Versions-non-US in
+ $base/misc/ instead of versioned $masterdir. Correct 'dak
+ make-maintainers' invocation to look in $configdir for
+ pseudo-packages.maintainers.
+
+ * daklib/queue.py (Upload.do_reject): use correct name for
+ rejection template.
+
+2006-06-11 James Troup <james@nocrew.org>
+
+ * dak/override.py (main): temporarily add content of old X-Katie
+ header back as the PTS apparently filters on it.
+ * dak/process_accepted.py (main): likewise.
+ * dak/process_new.py (main): likewise.
+ * dak/process_unchecked.py (main): likewise.
+ * dak/reject_proposed_updates.py (main): likewise.
+ * dak/rm.py (main): likewise.
+ * daklib/queue.py (Upload.do_reject): likewise.
+
+ * config/debian/cron.unchecked: set -u to error out on undefined
+ variables. Preset LOCKDAILY to "" accordingly.
+ * config/debian/cron.hourly: likewise.
+ * config/debian/cron.monthly: likewise.
+ * config/debian/cron.weekly: likewise.
+
+ * config/debian/vars (configdir): add new variable pointing to
+ this directory.
+
+ * config/debian/cron.daily: use $configdir inplace of $masterdir
+ when that's what we mean, and don't cd into $masterdir just to run
+ dak scripts as we don't need to do that anymore.
+ * config/debian/cron.hourly: likewise.
+ * config/debian/cron.unchecked: likewise.
+ * config/debian/cron.weekly: likewise.
+
+ * config/debian/dak.conf
+ (Import-Users-From-Passwd::KnownPostgres): temporarily add 'katie'
+ user back to list of known users as it's non-trivial to entirely
+ change the owner of a database with postgresql 7.4.
+
+ * daklib/queue.py (Upload.source_exists): use string object
+ methods rather than string module.
+ (Upload.get_anyversion): likewise.
+
+ * daklib/utils.py (validate_changes_file_arg): update filename
+ slicing to cope with new .dak filenames.
+
+ * dak/ls.py (main): add back 'heidi' as a valid argument for
+ -f/--format as people are using it in scripts and breaking that
+ without warning seems rude.
+
+2006-05-21 James Troup <james@nocrew.org>
+
+ * dak/rm.py (main): use string .isdigit() rather than
+ utils.str_isnum().
+ * dak/process_new.py (edit_overrides): likewise.
+
+ * daklib/utils.py (str_isnum): removed accordingly. Also drop
+ string import.
+
+2006-05-21 James Troup <james@nocrew.org>
+
+ * dak/check_archive.py (check_indices_files_exist): use list
+ comprehension instead of map(). No longer need to import
+ deprecated string module as a side-effect.
+ * dak/check_overrides.py (process): likewise.
+ (main): likewise.
+ * dak/cruft_report.py (do_obsolete_source): likewise.
+ (main): likewise.
+ * dak/ls.py (main): likewise.
+ * dak/make_suite_file_list.py (write_filelists): likewise.
+ * dak/process_accepted.py (stable_install): likewise.
+ * dak/rm.py (main): likewise.
+ * dak/stats.py (number_of_packages): likewise.
+ * daklib/logging.py (Logger.log): likewise.
+ * daklib/queue.py (Upload.source_exists): likewise.
+ (Upload.cross_suite_version_check): likewise.
+ * daklib/utils.py (parse_args): likewise.
+
+2006-05-21 James Troup <james@nocrew.org>
+
+ * daklib/utils.py (process_gpgv_output): new function, split out
+ of check_signature().
+ (check_signature): adapt accordingly.
+ (retrieve_key): new function that will try to retrieve the key
+ that signed a given file from a keyserver.
+ (check_signature): add 'autofetch' argument that if not set
+ defaults to the value of Dinstall::KeyAutoFetch (if that exists).
+ If 'autofetch' is true, invoke retrieve_key().
+
+ * docs/README.config: document Dinstall::KeyAutoFetch and
+ Dinstall:KeyServer.
+
+2006-05-20 James Troup <james@nocrew.org>
+
+ * dak/find_null_maintainers.py (main):
+ s/createtimestamp/createTimestamp/ to make things work with modern
+ slapd.
+
+ * config/debian/dak.conf: Update StableRejector, MoreInfoURL,
+ Stable::Version and Stable::Description for 3.1r2.
+
+ * config/debian-non-US/dak.conf: sync with klecker - update
+ version number of 3.0 and MoreInfoURL.
+
+ * docs/README.stable-point-release: Add notes about updating
+ dak.conf and Reject-Proposed-Updates section in particular.
+ s/woody/stable/. Also need to update README.html.
+
+ * scripts/debian/mklslar: drop support for uncompressed ls-lR file.
+
+ * config/debian/apt.conf: Add udeb tree for proposed-updates.
+
+2006-05-20 Ryan Murray <rmurray@debian.org>
+
+ * scripts/debian/update-ftpstats: new script to update daily
+ architecture size graph data.
+
+ * config/debian/cron.buildd: sync with spohr - due to ftp-master /
+ buildd split, simply ssh to buildd.d.o and call 'trigger.often'
+ there.
+
+ * config/debian/cron.daily: ssh to buildd and run 'trigger.daily'
+ before we finish. Don't push to merkel.
+
+ * dak/process_unchecked.py (check_changes): Also look in
+ ProposedUpdates queue dir.
+ (check_files): likewise.
+
+2006-05-20 Anthony Towns <ajt@debian.org>
+
+ * scripts/debian/mkfilesindices: new script to generate file
+ indices used for partial mirroring.
+
+ * config/debian/cron.daily: add progress timestamps.
+
+ * config/debian/dak.conf: update Dinstall::SigningKeyIds. Add
+ amd64 to testing, unstable and experimental. Drop sh from
+ experimental. Move Experimental to dists/experimental. Add
+ Dir::ProposedUpdates. Add Architectures::amd64.
+
+ * config/debian/apt.conf: add amd64 to testing, unstable and
+ experimental. Drop uncompressed Packages files from testing. Drop
+ sh from experimental. Move experimental to dists/experimental/.
+
+ * config/debian/vars (archs): add amd64.
+
+ * dak/process_unchecked.py (action): Add support for
+ proposed-updates approval queue.
+ (is_stableupdate): new function - checks if the upload is targeted
+ at proposed-updates.
+ (do_stableupdate): likewise - moves upload to proposed-updates
+ holding area.
+
+ * dak/process_new.py (do_new): warn if original or new target
+ suite are invalid.
+
+ * dak/generate_releases.py (print_md5sha_files): less whitespace
+ between the hash and size.
+
+ * dak/generate_index_diffs.py (genchanges): don't say we're not
+ doing anything. Better formatting of other messages.
+ (main): don't skip experimental and remove some 'doing stuff'
+ prints.
+
+2006-05-18 James Troup <james@nocrew.org>
+
+ * dak/clean_suites.py (clean_binaries): remove debug print of SQL
+ query.
+
+ * dak/init_dirs.py: pylint cleanups - long lines, unused globals,
+ docstrings, untabify, don't shadow builtins, lowercase non-global
+ variable names, spaces after commas. Also bail if given any
+ arguments since we don't accept any.
+ * dak/init_db.py: likewise. Also split large main() into
+ subfunctions and rename get() to sql_get().
+
+ * dak/init_db.py (main): check returned value from
+ database.get_archive_id().
+
+ * dak/dak.py: renamed from shell.py. Update to support new source
+ layout. Created init() and usage() functions. Various
+ pylint-inspired cleanups. Use daklib utils.warn() and
+ utils.fubar(). Change 'functionality' variable to only have
+ (command, description) and always invoke main() when running the
+ module. Also support -h.
+
+2006-05-17 James Troup <james@nocrew.org>
+
+ * dak/check_archive.py: remove $Id$ and $Revision$ strings. Update
+ imports of and calls to daklib modules. Change script name
+ everywhere, i.e. in output, mails, comments and configuration tree
+ + filenames. Also update references to other renamed scripts,
+ classes and templates. Use '.dak' instead of '.katie' for the
+ queue info storage files.
+ (Renamed from tea)
+ * dak/check_overrides.py: likewise. (Renamed from cindy)
+ * dak/check_proposed_updates.py: likewise. (Renamed from jeri)
+ * dak/clean_proposed_updates.py: likewise. (Renamed from halle)
+ * dak/clean_queues.py: likewise. (Renamed from shania)
+ * dak/clean_suites.py: likewise. (Renamed from rhona)
+ * dak/compare_suites.py: likewise. (Renamed from andrea)
+ * dak/control_overrides.py: likewise. (Renamed from natalie)
+ * dak/control_suite.py: likewise. (Renamed from heidi)
+ * dak/cruft_report.py: likewise. (Renamed from rene)
+ * dak/decode_dot_dak.py: likewise. (Renamed from ashley)
+ * dak/find_null_maintainers.py: likewise. (Renamed from rosamund)
+ * dak/generate_index_diffs.py: likewise. (Renamed from tiffani)
+ * dak/generate_releases.py: likewise. (Renamed from ziyi)
+ * dak/import_archive.py: likewise. (Renamed from neve)
+ * dak/import_ldap_fingerprints.py: likewise. (Renamed from emilie)
+ * dak/import_users_from_passwd.py: likewise. (Renamed from julia)
+ * dak/init_db.py: likewise. (Renamed from alyson)
+ * dak/init_dirs.py: likewise. (Renamed from rose)
+ * dak/ls.py: likewise. (Renamed from madison)
+ * dak/make_maintainers.py: likewise. (Renamed from charisma)
+ * dak/make_overrides.py: likewise. (Renamed from denise)
+ * dak/make_suite_file_list.py: likewise. (Renamed from jenna)
+ * dak/mirror_split.py: likewise. (Renamed from billie)
+ * dak/override.py: likewise. (Renamed from alicia)
+ * dak/poolize.py: likewise. (Renamed from catherine)
+ * dak/process_accepted.py: likewise. (Renamed from kelly)
+ * dak/process_new.py: likewise. (Renamed from lisa)
+ * dak/process_unchecked.py: likewise. (Renamed from jennifer)
+ * dak/queue_report.py: likewise. (Renamed from helena)
+ * dak/reject_proposed_updates.py: likewise. (Renamed from lauren)
+ * dak/rm.py: likewise. (Renamed from melanie)
+ * dak/security_install.py: likewise. (Renamed from amber)
+ * dak/split_done.py: likewise. (Renamed from nina)
+ * dak/stats.py: likewise. (Renamed from saffron)
+ * dak/symlink_dists.py: likewise. (Renamed from saffron)
+ * daklib/database.py: likewise. (Renamed from db_access)
+ * daklib/queue.py: likewise. 'Katie' class -> 'Upload'. (Renamed from katie)
+ * daklib/utils.py: likewise.
+
+ * dak/cruft_report.py: Use '[auto-cruft]' as the magic "this removal
+ doesn't need to notify anyone" string.
+ * dak/rm.py: likewise, look for '[auto-cruft]' as the magic string.
+
+ * dak/process_accepted.py (init): drop -V/--version argument.
+ * dak/process_new.py (init): likewise.
+ * dak/process_unchecked.py (init): likewise.
+ * dak/reject_proposed_updates.py (init): likewise
+
+ * dak/shell.py: Renamed from dak. ".katie" -> ".dak"
+
+ * dak/stats.py: in usage() output change STAT to MODE.
+
+2006-05-15 James Troup <james@nocrew.org>
+
+ * dak/queue_report.py: remove unused encodings imports.
+
+ * dak/mirror_split.py: drop unused pg, pwd, db_access and logging
+ imports. Initalize 'Cnf' as a global.
+ (BillieDB._internal_recurse): fix 'util.' typo.
+
+ * dak/import_ldap_fingerprints.py (main): drop unused time import and
+ commented out time check for LDAP search.
+
+2005-12-16 Ryan Murray <rmurray@debian.org>
+
+ * halle: add support for udebs
+ * kelly: stable_install: add support for binNMU versions
+
+2005-12-05 Anthony Towns <aj@erisian.com.au>
+
+ * katie.py: Move accept() autobuilding support into separate function
+ (queue_build), and generalise to build different queues
+
+ * db_access.py: Add get_or_set_queue_id instead of hardcoding accepted=0
+
+ * jennifer: Initial support for enabling embargo handling with the
+ Dinstall::SecurityQueueHandling option.
+ * jennifer: Shift common code into remove_from_unchecked and move_to_dir
+ functions.
+
+ * katie.conf-security: Include embargo options
+ * katie.conf-security: Add Lock dir
+ * init_pool.sql-security: Create disembargo table
+ * init_pool.sql-security: Add constraints for disembargo table
+
+2005-11-26 Anthony Towns <aj@erisian.com.au>
+
+ * Merge of changes from klecker, by various people
+
+ * amber: special casing for not passing on amd64 and oldstable updates
+ * amber: security mirror triggering
+ * templates/amber.advisory: updated advisory structure
+ * apt.conf.buildd-security: update for sarge's release
+ * apt.conf-security: update for sarge's release
+ * cron.buildd-security: generalise suite support, update for sarge's release
+ * cron.daily-security: update for sarge's release, add udeb support
+ * vars-security: update for sarge's release
+ * katie.conf-security: update for sarge's release, add amd64 support,
+ update signing key
+
+ * docs/README.names, docs/README.quotes: include the additions
+
+2005-11-25 Anthony Towns <aj@erisian.com.au>
+
+ * Changed accepted_autobuild to queue_build everywhere.
+ * Add a queue table.
+ * Add a "queue" field in the queue_build table (currently always 0)
+
+ * jennifer: Restructure to make it easier to support special
+ purpose queues between unchecked and accepted.
+
+2005-11-25 Anthony Towns <aj@erisian.com.au>
+
+ * Finishing merge of changes from spohr, by various people still
+
+ * jennifer: If changed-by parsing fails, set variables to "" so REJECT
+ works
+ * jennifer: Re-enable .deb ar format checking
+ * katie.py: Convert to +bX binNMU special casing
+ * rhona: Add some debug output when deleting binaries
+ * cron.daily: Add emilie
+ * cron.unchecked: Add lock files
+
+2005-11-15 Anthony Towns <aj@erisian.com.au>
+
+ * Merge of changes from spohr, by various people.
+
+ * tiffani: new script to do patches to Packages, Sources and Contents
+ files for quicker downloads.
+ * ziyi: update to authenticate tiffani generated files
+
+ * dak: new script to provide a single binary with less arbitrary names
+ for access to dak functionality.
+
+ * cindy: script implemented
+
+ * saffron: cope with suites that don't have a Priority specified
+ * heidi: use get_suite_id()
+ * denise: don't hardcode stable and unstable, or limit udebs to unstable
+ * denise: remove override munging for testing (now done by cindy)
+ * helena: expanded help, added new, sort and age options, and fancy headers
+ * jennifer: require description, add a reject for missing dsc file
+ * jennifer: change lock file
+ * kelly: propogation support
+ * lisa: honour accepted lock, use mtime not ctime, add override type_id
+ * madison: don't say "dep-retry"
+ * melanie: bug fix in output (missing %)
+ * natalie: cope with maintainer_override == None; add type_id for overrides
+ * nina: use mtime, not ctime
+
+ * katie.py: propogation bug fixes
+ * logging.py: add debugging support, use | as the logfile separator
+
+ * katie.conf: updated signing key (4F368D5D)
+ * katie.conf: changed lockfile to dinstall.lock
+ * katie.conf: added Lisa::AcceptedLockFile, Dir::Lock
+ * katie.conf: added tiffani, cindy support
+ * katie.conf: updated to match 3.0r6 release
+ * katie.conf: updated to match sarge's release
+
+ * apt.conf: update for sarge's release
+ * apt.conf.stable: update for sarge's release
+ * apt.conf: bump daily max Contents change to 25MB from 12MB
+
+ * cron.daily: add accepted lock and invoke cindy
+ * cron.daily: add daily.lock
+ * cron.daily: invoke tiffani
+ * cron.daily: rebuild accepted buildd stuff
+ * cron.daily: save rene-daily output on the web site
+ * cron.daily: disable billie
+ * cron.daily: add stats pr0n
+
+ * cron.hourly: invoke helena
+
+ * pseudo-packages.maintainers,.descriptions: miscellaneous updates
+ * vars: add lockdir, add etch to copyoverrides
+ * Makefile: add -Ipostgresql/server to CXXFLAGS
+
+ * docs/: added README.quotes
+ * docs/: added manpages for alicia, catherine, charisma, cindy, heidi,
+ julia, katie, kelly, lisa, madison, melanie, natalie, rhona.
+
+ * TODO: correct spelling of "conflicts"
+
+2005-05-28 James Troup <james@nocrew.org>
+
+ * helena (process_changes_files): use MTIME rather than CTIME (the
+ C's not for 'creation', stupid).
+ * lisa (sort_changes): likewise.
+
+ * jennifer (check_distributions): use has_key rather than an 'in'
+ test which doesn't work with python2.1. [Probably by AJ]
+
+2005-03-19 James Troup <james@nocrew.org>
+
+ * rene (main): use Suite::<suite>::UdebComponents to determine
+ what components have udebs rather than assuming only 'main' does.
+
+2005-03-18 James Troup <james@nocrew.org>
+
+ * utils.py (rfc2047_encode): use codecs.lookup() rather than
+ encodings.<encoding>.Codec().decode() as encodings.utf_8 no longer
+ has a Codec() module in python2.4. Thanks to Andrew Bennetts
+ <andrew@ubuntu.com>.
+
+2005-03-06 Joerg Jaspert <ganneff@debian.org>
+
+ * helena: add -n/--new HTML output option and improved sorting
+ options.
+
+2005-03-06 Ryan Murray <rmurray@debian.org>
+
+ * shania(main): use Cnf::Dir::Reject instead of REJECT
+
+2005-02-08 James Troup <james@nocrew.org>
+
+ * rene (main): add partial NBS support by checking that binary
+ packages are built by their real parent and not some random
+ stranger.
+ (do_partial_nbs): likewise.
+
+2005-01-18 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.build_summaries): avoid leaking file handle when
+ extracting package description.
+ (Katie.force_reject): remember and close each file descriptor we
+ use.
+ (Katie.do_reject): s/file/temp_fh/ to avoid pychecker warning.
+ s/reason_file/reason_fd/ because it's a file descriptor.
+ (Katie.check_dsc_against_db): avoid leaking file handle whenever
+ invoking apt_pkg.md5sum().
+
+ * jennifer (check_deb_ar): new function: sanity check the ar
+ contents of a .deb.
+ (check_files): use it.
+ (check_timestamps): check for data.tar.bz2 if data.tar.gz can't be
+ found.
+ (check_files): accept 'raw-installer' as an alias for 'byhand'.
+
+2005-01-14 Anthony Towns <ajt@debian.org>
+
+ * kelly: when UNACCEPTing, don't double up the "Rejecting:"
+
+ * propup stuff (thanks to Andreas Barth)
+ * katie.conf: add stable MustBeOlderThan testing, add -security
+ propup
+ * jennifer: set distribution-version in .katie if propup may be needed
+ * katie.py: add propogation to cross_suite_version_check
+
+2004-11-27 James Troup <james@nocrew.org>
+
+ * nina: new script to split monolithic queue/done into date-based
+ hierarchy.
+
+ * rene (usage): document -s/--suite.
+ (add_nbs): use .setdefault().
+ (do_anais): likewise.
+ (do_nbs): don't set a string to "" and then += it.
+ (do_obsolete_source): new function - looks for obsolete source
+ packages (i.e source packages whose binary packages are ALL a)
+ claimed by someone else and b) newer when built from the other
+ source package).
+ (main): support -s/--suite. Add 'obsolete source' to both 'daily'
+ and 'full' check modes. Check for obsolete source packages.
+ linux-wlan-ng has been fixed - remove hideous bodge.
+
+ * jennifer (check_distributions): support 'reject' suite map type.
+
+ * utils.py (validate_changes_file_arg): s/file/filename/.
+ s/fatal/require_changes/. If require_changes is -1, ignore errors
+ and return the .changes filename regardless.
+ (re_no_epoch): s/\*/+/ as there must be a digit in an epoch.
+ (re_no_revision): don't escape '-', it's not a special character.
+ s/\*/+/ as there must be at least one non-dash character after the
+ dash in a revision. Thanks to Christian Reis for noticing both of
+ these.
+
+ * ashley (main): pass require_changes=-1 to
+ utils.validate_changes_file_arg().
+
+ * pseudo-packages.maintainers (kernel): switch to 'Debian Kernel
+ Team <debian-kernel@lists.debian.org>'.
+
+ * katie.py (Katie.in_override_p): fix .startswith() usage.
+
+ * katie.conf (Dinstall::DefaultSuite): add as 'unstable'.
+ (Lauren::MoreInfoURL): update to 3.0r3.
+ (Suite::Stable::Version): likewise.
+ (Suite::Stable::Description): likewise.
+
+ * cron.daily: disable automatic task override generation.
+
+ * cindy (process): restrict "find all packages" queries by
+ component. Respect Options["No-Action"].
+ (main): add -n/--no-action support. Only run on unstable. Rename
+ type to otype (pychecker).
+
+2004-11-27 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * katie.conf (Billie::BasicTrees): add all architectures.
+ (Billie::CombinationTrees): remove 'welovehp' and 'embedded', add
+ 'everything'.
+
+ * cron.daily: Update a 'current' symlink when creating the
+ post-daily-cron-job database backup to aid mirroring to merkel.
+ Run billie.
+
+ * billie (BillieTarget.poolish_match): handle .udeb too.
+
+2004-10-13 Ryan Murray <rmurray@debian.org>
+
+ * amber (do_upload): Sort changes files in "katie" order so that
+ source always arrives before binary-only rebuilds
+
+2004-10-05 James Troup <james@nocrew.org>
+
+ * jennifer (check_dsc): correct reject message on invalid
+ Maintainer field.
+
+2004-09-20 James Troup <james@nocrew.org>
+
+ * alicia: remove unused 'pwd' import.
+
+ * tea (check_override): underline suite name in output properly.
+
+ * rene (main): read a compressed Packages file.
+ * tea (validate_packages): likewise.
+
+ * katie.py (re_fdnic): add 'r' prefix.
+ (re_bin_only_nmu_of_mu): likewise.
+ (re_bin_only_nmu_of_nmu): likewise.
+
+ * madison (main): retrieve component information too and display
+ it if it's not 'main'.
+ * melanie (reverse_depends_check): likewise.
+
+ * utils.py (pp_dep): renamed...
+ (pp_deps): ... to this.
+ * jeri (check_dep): update calls to utils.pp_deps().
+ * melanie (reverse_depends_check): likewise.
+
+ * jennifer (check_changes): move initalization of email variables
+ from here...
+ (process_it): ...to here as we no longer always run
+ check_changes(). Don't bother to initialize
+ changes["architecture"].
+
+ * denise (list): renamed to...
+ (do_list): ...this to avoid name clash with builtin 'list'.
+ Similarly, s/file/output_file/, s/type/otype/. Use .setdefault()
+ for dictionaries.
+ (main): Likewise for name clash avoidance and also
+ s/override_type/suffix/. Adjust call to do_list().
+
+2004-09-01 Ryan Murray <rmurray@debian.org>
+
+ * tea (check_files): check the pool/ directory instead of dists/
+
+2004-08-04 James Troup <james@nocrew.org>
+
+ * jenna (cleanup): use .setdefault() for dictionaries.
+ (write_filelists): likewise.
+
+ (write_filelists): Use utils.split_args() not split() to split
+ command line arguments.
+ (stable_dislocation_p): likewise.
+
+ (write_filelists): Add support for mapping side of suite-based
+ "Arch: all mapping".
+ (do_da_do_da): ensure that if we're not doing all suites that we
+ process enough to be able correct map arch: all packages.
+
+ * utils.py (cant_open_exc): correct exception string,
+ s/read/open/, s/.$//.
+
+ * templates/amber.advisory: update to match reality a little
+ better.
+
+ * melanie (reverse_depends_check): read Packages.gz rather than
+ Packages.
+
+ * jennifer (check_files): check for unknown component before
+ checking for NEWness.
+
+ * katie.py (Katie.in_override_p): use .startswith in favour of a
+ slice.
+
+ * docs/melanie.1.sgml: document -R/--rdep-check.
+
+2004-07-12 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * billie (main): Make the verbatim lists include all the README
+ elements.
+ * docs/README.names: Add billie in (correcting oversight)
+
+2004-07-01 James Troup <james@nocrew.org>
+
+ * emilie (main): handle woody's case-sensitive python-ldap,
+ s/keyfingerprint/keyFingerPrint/.
+
+2004-06-25 James Troup <james@nocrew.org>
+
+ * debian/control (Depends): add dpkg-dev since jennifer uses
+ dpkg-source.
+
+2004-06-24 James Troup <james@nocrew.org>
+
+ * melanie (main): s/file/temp_file/ and close file handle before
+ removing the temporary file.
+ (main): don't warn about needing a --carbon-copy if in no-action
+ mode.
+
+ * rene (do_nbs): pcmcia-cs has been fixed - remove hideous bodge.
+ (main): likewise.
+
+ * test/006/test.py (main): check bracketed email-only form.
+
+ * utils.py (fix_maintainer): if the Maintainer string is bracketed
+ email-only, strip the brackets so we don't end up with
+ <<james@nocrew.org>>.
+
+2004-06-20 James Troup <james@nocrew.org>
+
+ * jennifer (process_it): only run check_changes() if
+ check_signature() returns something. (Likewise)
+
+ * utils.py (changes_compare): if there's no changes["version"] use
+ "0" rather than None. (Avoids a crash on unsigned changes file.)
+
+2004-06-17 Martin Michlmayr <tbm@cyrius.com>
+
+ * jeri (pp_dep): moved from here to ...
+ * utils.py (pp_dep): here.
+
+ * melanie (main): add reverse dependency checking.
+
+2004-06-17 James Troup <james@nocrew.org>
+
+ * jennifer (check_dsc): s/dsc_whitespace_rules/signing_rules/.
+ * tea (check_dscs): likewise.
+
+ * utils.py (parse_changes): s/dsc_whitespace_rules/signing_rules/,
+ change from boolean to a variable with 3 possible values, 0 and 1
+ as before, -1 means don't require a signature. Makes
+ parse_changes() useful for parsing arbitary RFC822-style files,
+ e.g. 'Release' files.
+ (check_signature): add support for detached signatures by passing
+ the files the signature is for as an optional third argument.
+ s/filename/sig_filename/g. Add a fourth optional argument to
+ choose the keyring(s) to use. Don't os.path.basename() the
+ sig_filename before checking it for taint.
+ (re_taint_free): allow '/'.
+
+2004-06-11 James Troup <james@nocrew.org>
+
+ * tea (check_files): make override.unreadable optional.
+ (validate_sources): close the Sources file handle.
+
+ * docs/README.first: clarify that 'alyson' and running
+ add_constraints.sql by hand is something you only want to do if
+ you're not running 'neve'.
+
+ * docs/README.config (Location::$LOCATION::Suites): document.
+
+ * db_access.py (do_query): also print out the result of the query.
+
+2004-06-10 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.cross_suite_version_check): post-woody versions
+ of python-apt's apt_pkg.VersionCompare() function apparently
+ returns variable integers for less than or greater than results -
+ update our result checking to match.
+ * jenna (resolve_arch_all_vs_any): likewise.
+ * charisma (main): likewise.
+
+2004-06-09 James Troup <james@nocrew.org>
+
+ * jennifer (process_it): s/changes_valid/valid_changes_p/. Add
+ valid_dsc_p and don't run check_source() if check_dsc() failed.
+ (check_dsc): on fatal failures return 0 so check_source() isn't
+ run (since it makes fatal assumptions about the presence of
+ mandatory .dsc fields).
+ Remove unused and obsolete re_bad_diff and re_is_changes regexps.
+
+2004-05-07 James Troup <james@nocrew.org>
+
+ * katie.conf (Rhona::OverrideFilename): unused and obsolete, remove.
+ * katie.conf-non-US (Rhona::OverrideFilename): likewise.
+
+ * katie.conf (Dir::Override): remove duplicate definition.
+
+ * neve (get_or_set_files_id): add an always-NULL last_used column
+ to output.
+
+2004-04-27 James Troup <james@nocrew.org>
+
+ * apt.conf-security (tree "dists/stable/updates"): add
+ ExtraOverride - noticed by Joey Hess (#246050).
+ (tree "dists/testing/updates"): likewise.
+
+2004-04-20 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): check for existing .changes or .katie
+ files of the same name in the Suite::<suite>::Copy{Changes,Katie}
+ directories.
+
+2004-04-19 James Troup <james@nocrew.org>
+
+ * jennifer (check_source): handle failure to remove the temporary
+ directory (used for source tree extraction) better, specifically:
+ if we fail with -EACCES, chmod -R u+rwx the temporary directory
+ and try again and if that works, REJECT the package.
+
+2004-04-17 James Troup <james@nocrew.org>
+
+ * docs/madison.1.sgml: document -b/--binary-type,
+ -g/--greaterorequal and -G/--greaterthan.
+
+ * madison (usage): -b/--binary-type only takes a single argument.
+ Document -g/--greaterorequal and -G/--greaterthan.
+ (main): add support for -g/--greaterorequal and -G/--greaterthan.
+
+2004-04-12 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * billie: Cleaned up a load of comments, added /README.non-US to
+ the verbatim matches list.
+
+2004-04-07 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * utils.py (size_type): Make it use real binary megabytes and
+ kilobytes, instead of the marketing terms used before.
+
+2004-04-07 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.check_dsc_against_db): in the case we're
+ ignoring an identical-to-existing orig.tar.gz remember the path to
+ the existent version in pkg.orig_tar_gz. Adjust query to grab
+ location.path too to be able to do so.
+
+2004-04-03 James Troup <james@nocrew.org>
+
+ * debian/control (Depends): add python2.1-email | python (>= 2.2)
+ needed for new utils.rfc2047_encode() function.
+
+ * utils.py (re_parse_maintainer): allow whitespace inside the
+ email address.
+ (Error): new exception base class.
+ (ParseMaintError): new exception class.
+ (force_to_utf8): new function.
+ (rfc2047_encode): likewise.
+ (fix_maintainer): rework. use force_to_utf8() to force name and
+ rfc822 return values to always use UTF-8. use rfc2047_encode() to
+ return an rfc2047 value. Validate the address to catch missing
+ email addresses and (some) broken ones.
+
+ * katie.py (nmu_p.is_an_nmu): adapt for new utils.fix_maintainer()
+ by adopting foo2047 return value.
+ (Katie.dump_vars): add changedby2047 and maintainer2047 as
+ mandatory changes fields. Promote changes and maintainer822 to
+ mandatory fields.
+ (Katie.update_subst): default maintainer2047 rather than
+ maintainer822. User foo2047 rather than foo822 when setting
+ __MAINTAINER_TO__ or __MAINTAINER_FROM__.
+
+ * jennifer (check_changes): set default changes["maintainer2047"]
+ and changes["changedby2047"] values rather than their 822
+ equivalents. Makes changes["changes"] a mandatory field. Adapt
+ to new utils.fix_maintainer() - reject on exception and adopt
+ foo2047 return value.
+ (check_dsc): if a mandatory field is missing don't do any further
+ checks and as a result reduce paranoia about dsc[var] existence.
+ Validate the maintainer field by calling new
+ utils.fix_maintainer().
+
+ * ashley (main): add changedby2047 and maintainer2047 to mandatory
+ changes fields. Promote maintainer822 to a mandatory changes
+ field. add "pool name" to files fields.
+
+ * test/006/test.py: new file - tests for new
+ utils.fix_maintainer().
+
+2004-04-01 James Troup <james@nocrew.org>
+
+ * templates/lisa.prod (To): use __MAINTAINER_TO__ not __MAINTAINER__.
+
+ * jennifer (get_changelog_versions): create a symlink mirror of
+ the source files in the temporary directory.
+ (check_source): if check_dsc_against_db() couldn't find the
+ orig.tar.gz bail out.
+
+ * katie.py (Katie.check_dsc_against_db): if the orig.tar.gz is not
+ part of the upload store the path to it in pkg.orig_tar_gz and if
+ it can't be found set pkg.orig_tar_gz to -1.
+
+ Explicitly return the second value as None in the (usual) case
+ where we don't have to reprocess. Remove obsolete diagnostic
+ logs.
+
+ * lisa (prod_maintainer): don't return anything, no one cares. (pychecker)
+
+ * utils.py (temp_filename): new helper function that wraps around
+ tempfile.mktemp().
+
+ * katie.py (Katie.do_reject): use it and don't import tempfile.
+ * lisa (prod_maintainer): likewise.
+ (edit_note): likewise.
+ (edit_new): likewise.
+ * lauren (reject): likewise.
+ * melanie (main): likewise.
+ * neve (do_sources): likewise.
+ * rene (main): likewise.
+ * tea (validate_sources): likewise.
+
+2004-03-31 James Troup <james@nocrew.org>
+
+ * tea (validate_sources): remove unused 's' temporary variable.
+
+2004-03-15 James Troup <james@nocrew.org>
+
+ * jennifer (check_dsc): check changes["architecture"] for
+ source before we do anything else.
+
+2004-03-21 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * billie: Added
+ * katie.conf (Billie): Added sample Billie stanza to katie.conf
+
+2004-03-12 James Troup <james@nocrew.org>
+
+ * docs/README.config (Dir::Queue::BTSVersionTrack): document.
+
+ * katie.conf (Dir::Queue::BTSVersionTrack): define.
+
+ * katie.py (Katie.accept): add support for DebBugs Version
+ Tracking by writing out .versions (generated in jennifer's
+ get_changelog_versions()) and .debinfo (mapping of binary ->
+ source) files.
+
+ * ashley (main): add dsc["bts changelog"].
+
+ * katie.py (Katie.dump_vars): store dsc["bts changelog"] too.
+
+ * jennifer (check_diff): obsoleted by check_source(), removed.
+ (check_source): new function: create a temporary directory and
+ move into it and call get_changelog_versions().
+ (get_changelog_versions): new function: extract the source package
+ and optionally parse debian/changelog to obtain the version
+ history for the BTS.
+ (process_it): call check_source() rather than check_diff().
+
+2004-03-08 James Troup <james@nocrew.org>
+
+ * lisa (edit_index): Fix logic swapo from 'use "if varfoo in
+ listbar" rather than "if listbar.count(varfoo)"' change on
+ 2004-02-24.
+
+2004-03-05 James Troup <james@nocrew.org>
+
+ * alicia (main): don't warn about not closing bugs - we don't
+ manage overrides through the BTS.
+
+2004-02-27 Martin Michlmayr <tbm@cyrius.com>
+
+ * docs/README.config: lots of updates and corrections.
+ * docs/README.first: likewise.
+
+ * docs/README.config: drop unused Dir::Queue::Root.
+ * katie.conf-non-US: likewise.
+ * katie.conf: likewise.
+ * katie.conf-security: likewise.
+
+2004-02-27 James Troup <james@nocrew.org>
+
+ * rose (process_tree): use 'if var in [ list ]' rather than long
+ 'if var == foo or var == bar or var == baz'. Suggested by Martin
+ Michlmayr.
+
+ * jennifer (check_files): reduce 'if var != None' to 'if var' as
+ suggested by Martin Michlmayr.
+ * catherine (poolize): likewise.
+ * charisma (main): likewise.
+ * halle (check_changes): likewise.
+ * heidi (main): likewise.
+ (process_file): likewise.
+ * kelly (install): likewise.
+ (stable_install): likewise.
+ * utils.py (fix_maintainer): likewise.
+
+ * apt.conf: add support for debian-installer in testing-proposed-updates.
+ * katie.conf (Suite::Testing-Proposed-Updates::UdebComponents):
+ add - set to main.
+
+ * mkmaintainers: add "-T15" option to wget of non-US packages file
+ so that we don't hang cron.daily if non-US is down.
+
+ * templates/lisa.prod (Subject): Prefix with "Comments regarding".
+
+ * templates/jennifer.bug-close: add Source and Source-Version
+ pseudo-headers that may be used for BTS Version Tracking someday
+ [ajt@].
+
+ * rene (do_nbs): special case linux-wlan-ng like we do for pcmcia.
+ (main): likewise.
+
+ * cron.unchecked: it's /org/ftp.debian.org not ftp-master.
+
+2004-02-25 James Troup <james@nocrew.org>
+
+ * katie.conf (SuiteMappings): don't map testing-security to
+ proposed-updates.
+
+2004-02-24 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.__init__): remove unused 'values' field.
+
+ * utils.py (extract_component_from_section): use 's.find(c) != -1'
+ rather than 's.count(c) > 0'.
+
+ * katie.py (Katie.source_exists): use "if varfoo in listbar"
+ rather than "if listbar.count(varfoo)".
+ * halle (check_joey): likewise.
+ * jeri (check_joey): likewise.
+ * lisa (edit_index): likewise.
+ * jenna (stable_dislocation_p): likewise.
+
+ * jennifer (main): remove unused global 'nmu'.
+
+2004-02-03 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * pseudo-packages.maintainers (ftp.debian.org): Changed the maintainer
+ to be ftpmaster@ftp-master.debian.org to bring it into line with how
+ the dak tools close bugs.
+
+2004-02-02 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * katie.conf (Alicia): Added an Alicia section with email address
+ * templates/alicia.bug-close: Added
+ * docs/alicia.1.sgml: Added the docs for the -d/--done argument
+ * alicia (main): Added a -d/--done argument
+
+2004-02-02 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * templates/lisa.prod: Oops, missed a BITCH->PROD conversion
+
+2004-01-29 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * lisa (prod_maintainer): Added function to prod the maintainer without
+ accepting or rejecting the package
+ * templates/lisa.prod: Added this template for the prodding mail
+
+ * .cvsignore: Added neve-files which turns up in new installations
+
+2004-01-30 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * alicia (usage): Fixed usage message to offer section and priority
+ as seperately optional arguments.
+ * alicia (main): Added a % (arg) interpolation needed when only
+ one of section or priority is provided and it cannot be found.
+
+2004-01-29 Daniel Silverstone <dsilvers@digital-scurf.org>
+
+ * alicia: Added
+ * docs/alicia.1.sgml: Added
+ * docs/Makefile: Added alicia to the list of manpages to build
+ * docs/README.names: Noted what alicia does
+ * docs/README.first: Noted where alicia is useful
+
+2004-01-21 James Troup <james@nocrew.org>
+
+ * madison (main): add -b/--binary-type.
+ (usage): likewise.
+
+ * denise (main): generate debian-installer overrides for testing
+ too.
+ * apt.conf: add support for debian-installer in testing.
+ * katie.conf (Suite::Testing::UdebComponents): set to main.
+
+ * katie.conf (Dinstall::SigningKeyIds): 2004 key.
+ * katie.conf-non-US (Dinstall::SigningKeyIds): likewise.
+ * katie.conf-security (Dinstall::SigningKeyIds): likewise.
+
+ * utils.py (parse_changes): don't process data not inside the
+ signed data. Thanks to Andrew Suffield <asuffield@debian.org> for
+ pointing this out.
+ * test/005/test.py (main): new test to test for above.
+
+2004-01-04 James Troup <james@nocrew.org>
+
+ * jenna (write_filelists): correct typo, s/Components/Component/
+ for Options.
+
+2004-01-04 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: move update of overrides and Packages file...
+ * cron.unchecked: to here.
+ * katie.conf-non-US: (Dinstall::SingingKeyIds) update for 2003v2 key
+ * katie.conf-security: likewise
+
+2003-11-20 James Troup <james@nocrew.org>
+
+ * jenna (main): don't use utils.try_with_debug(), it produces way
+ too much output.
+
+ * halle (check_changes): don't error out if a .changes refers to a
+ non-existent package, just warn and skip the file.
+
+ * docs/README.stable-point-release: mention halle and .changes
+ obsoleted by removal through melanie. Update for 3.0r2.
+
+ * katie.conf (Suite::Stable::Version): bump to 3.0r2.
+ (Suite::Stable::Description): update for 3.0r2.
+ (Lauren::MoreInfoURL): likewise.
+ * katie.conf-non-US (Suite::Stable::Version): likewise.
+ (Suite::Stable::Description): likewise.
+ (Lauren::MoreInfoURL): likewise.
+
+ * apt.conf.stable (Default): don't define MaxContentsChange.
+ * apt.conf.stable-non-US (Default): likewise.
+
+ * lauren (reject): hack to work around partial replacement of an
+ upload, i.e. one or more binaries superseded by another source
+ package.
+
+2003-11-17 James Troup <james@nocrew.org>
+
+ * pseudo-packages.maintainers: point installation-reports at
+ debian-boot@l.d.o rather than debian-testing@l.d.o at jello@d.o's
+ request.
+
+ * utils.py (parse_changes): calculate the number of lines once
+ with len() rather than max().
+
+ * jennifer (check_dsc): handle the .orig.tar.gz disappearing from
+ files, since check_dsc_against_db() deletes the .orig.tar.gz
+ entry.
+
+2003-11-13 Ryan Murray <rmurray@debian.org>
+
+ * apt.conf: specify a src override file for debian-installer
+
+2003-11-10 James Troup <james@nocrew.org>
+
+ * fernanda.py (strip_pgp_signature): new function - strips PGP
+ signature from a file and returns the modified contents of the
+ file in a string.
+ (display_changes): use it.
+ (read_dsc): likewise.
+
+2003-11-09 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: export accepted_autobuild table for unstable, and use
+ it to generate the incoming Packages/Sources rather than having apt
+ walk the directory.
+ * apt.conf.buildd: use exported table from cron.buildd to generate
+ Packages/Sources
+
+2003-11-07 James Troup <james@nocrew.org>
+
+ * kelly: import errno.
+
+ * katie.py (Katie.build_summaries): sort override disparities.
+
+ * kelly (install): set dsc_component based on the .dsc's component
+ not a random binaries.
+
+2003-10-29 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.build_summaries): don't assume changes["source"]
+ exists since it might not.
+
+2003-10-20 James Troup <james@nocrew.org>
+
+ * pseudo-packages.maintainers: update security.d.o to use
+ team@s.d.o at joy@'s request.
+
+2003-10-17 James Troup <james@nocrew.org>
+
+ * jennifer (check_dsc): use .startswith rather than .find() == 0.
+
+2003-10-17 Martin Michlmayr <tbm@cyrius.com>
+
+ * tea (chk_bd_process_dir): use .endswith rather than slice.
+
+2003-10-14 James Troup <james@nocrew.org>
+
+ * tea (check_build_depends): new function.
+ (chk_bd_process_dir): likewise. Validates build-depends in .dsc's
+ in the archive.
+ (main): update for new function.
+ (usage): likewise.
+
+ * katie.py (Katie.do_reject): sanitize variable names,
+ s/reject_filename/reason_filename/, s/fd/reason_fd/. Move shared
+ os.close() to outside if clause.
+
+ * jennifer (check_dsc): check build-depends and
+ build-depends-indep by running them past apt_pkg.ParseSrcDepends.
+ Fold the ARRAY check into the same code block and tidy up it's
+ rejection message.
+ (check_changes): ensure that the Files field is non-empty.
+ Suggested by Santiago Vila <sanvila@unex.es>
+ (check_changes): normalize reject messages.
+ (check_dsc): instead of doing most of the checks inside a for loop
+ and an if, find the dsc_filename in a short loop over files first
+ and then do all the checks. Add check for more than one .dsc in a
+ .changes which we can't handle. Normalize reject messages.
+
+2003-10-13 James Troup <james@nocrew.org>
+
+ * katie.conf (Dinstall::Reject::NoSourceOnly): set to true.
+ * katie.conf-non-US (Dinstall::Reject::NoSourceOnly): likewise.
+
+ * jennifer (check_files): Set 'has_binaries' and 'has_source'
+ variables while iterating over 'files'. Don't regenerate it when
+ checking for source if source is mentioned.
+
+ Reject source only uploads if the config variable
+ Dinstall::Reject::NoSourceOnly is set.
+
+2003-10-03 James Troup <james@nocrew.org>
+
+ * rene (main): add nasty hardcoded reference to debian-installer
+ so we detect NBS .udebs.
+
+2003-09-29 James Troup <james@nocrew.org>
+
+ * apt.conf (old-proposed-updates): remove.
+ * apt.conf-non-US (old-proposed-updates): likewise.
+
+2003-09-24 James Troup <james@nocrew.org>
+
+ * tea (check_files_not_symlinks): new function, ensure files
+ mentioned in the database aren't symlinks. Includes code to
+ update any files that are like this to their real filenames +
+ location; commented out by though.
+ (usage): update for new function.
+ (main): likewise.
+
+2003-09-24 Anthony Towns <ajt@debian.org>
+
+ * vars: external-overrides variable added
+ * cron.daily: Update testing/unstable Task: overrides from joeyh
+ managed external source.
+
+2003-09-22 James Troup <james@nocrew.org>
+
+ * kelly (install): if we can't move the .changes into queue/done,
+ fail don't warn and carry on. The old behaviour pre-dates NI and
+ doesn't make much sense now since jennifer checks both
+ queue/accepted and queue/done for any .changes files it's
+ processing.
+
+ * utils.py (move): don't throw exceptions on existing files or
+ can't overwrite, instead just fubar out.
+
+ * jennifer (check_dsc): also check Build-Depends-Indep for
+ ARRAY-lossage. Noticed by Matt Zimmerman <mdz@debian.org>.
+
+2003-09-18 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.close_bugs): only log the bugs we've closed
+ once.
+
+ * kelly (main): log as 'kelly', not 'katie'.
+
+2003-09-16 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.check_binary_against_db): likewise noramlize.
+
+ * jennifer (check_changes): normalize reject message for "changes
+ file already exists" to be %s: <foo>.
+ (check_dsc): add a check for 'Build-Depends: ARRAY(<hex>)'
+ produced by broken dpkg-source in 1.10.11. Tone down and
+ normalize rejection message for incompatible 'Format' version
+ numbers.
+ (check_diff): likewise tone down and normalize.
+
+2003-09-07 James Troup <james@nocrew.org>
+
+ * utils.py (parse_changes): if dsc_whitespace_rules is false,
+ don't bomb out on bogus empty lines.
+ (build_file_list): check for changes["files"] earlier. use Dict
+ to create files[name] dictionary.
+ (send_mail): don't bother validating arguments.
+ (check_signature): minor improvements to some of the rejection
+ messages including listing the key id of the key that wasn't found
+ in the keyring.
+ (wrap): new function.
+
+ * tea: add new check 'validate-indices' that ensures all files
+ mentioned in indices (Packages, Sources) files do in fact exist.
+
+ * catherine (poolize): use a local re_isadeb which handles legacy
+ (i.e. no architecture) style .deb filenames.
+
+ * rosamund: new script.
+
+ * rhona (check_binaries): when checking for binary packages not in
+ a suite, don't bother selecting files that already have a
+ last_used date.
+ (check_sources): likewise.
+
+ * rhona: change all SQL EXISTS sub-query clauses to use the
+ postgres suggested convention of "SELECT 1 FROM".
+ * andrea (main): likewise.
+ * tea (check_override): likewise.
+ * catherine (main): likewise.
+
+ * katie.conf (Suite): remove OldStable and Old-Proposed-Updates
+ entries and in other suites MustBeNewerThan's.
+ (SuiteMappings): likewise
+ * katie.conf-non-US: likewise.
+ * katie.conf-security: likewise.
+
+ * apt.conf-security: remove oldstable.
+ * apt.conf.stable: likewise.
+ * apt.conf.stable-non-US: likewise.
+ * cron.buildd-security: likewise.
+ * cron.daily-security: likewise.
+ * vars-security (suites): likewise.
+ * wanna-build/trigger.daily: likewise.
+
+ * claire.py (clean_symlink): move...
+ * utils.py (clean_symlink): here.
+
+ * claire.py (find_dislocated_stable): update accordingly.
+
+2003-08-16 Anthony Towns <ajt@debian.org>
+
+ * katie.py (source_exists): expand the list of distributions
+ the source may exist in to include any suite that's mapped to
+ the destination suite (even transitively (a->b->c)). This should
+ unbreak binary uploads to *-proposed-updates.
+
+2003-08-09 Randall Donald <rdonald@debian.org>
+
+ * lisa (recheck): change changes["distribution"].keys() to
+ Katie.pkg.changes...
+
+2003-08-08 Randall Donald <rdonald@debian.org>
+
+ * katie.py: only tag bugs as fixed-in-experimental for
+ experimental uploads
+
+2003-07-26 Anthony Towns <ajt@debian.org>
+
+ * katie.py (source_exists): add an extra parameter to limit the
+ distribution(s) the source must exist in.
+ * kelly, lisa, jennifer: update to use the new source_exists
+
+2003-07-15 Anthony Towns <ajt@debian.org>
+
+ * ziyi: quick hack to support a FakeDI line in apt.conf to generate
+ checksums for debian-installer stuff even when it's just a symlink to
+ another suite
+
+ * apt.conf: add the FakeDI line
+
+2003-06-09 James Troup <james@nocrew.org>
+
+ * kelly (check): make sure the 'file' we're looking for in 'files'
+ hasn't been deleted by katie.check_dsc_against_db().
+
+2003-05-07 James Troup <james@nocrew.org>
+
+ * helena (time_pp): fix s/years/year/ typo.
+
+2003-04-29 James Troup <james@nocrew.org>
+
+ * madison (usage): document -c/--component.
+
+ * madison (usage): Fix s/seperated/separated/.
+ * melanie (usage): likewise.
+ * jenna (usage): likewise.
+
+2003-04-24 James Troup <james@nocrew.org>
+
+ * cron.daily-non-US: if there's nothing for kelly to install, say
+ so.
+
+ * jennifer (check_timestamps): print sys.exc_value as well as
+ sys.exc_type when capturing exceptions. Prefix 'timestamp check
+ failed' with 'deb contents' to make it clearer what timestamp(s)
+ are being checked.
+
+2003-04-15 James Troup <james@nocrew.org>
+
+ * cron.daily-non-US: only run kelly if there are some .changes
+ files in accepted.
+
+ * rene: add -m/--mode argument which can be either daily (default)
+ or full. In daily mode only 'nviu' and 'nbs' checks are run.
+ Various changes to make this possible including a poor attempt at
+ splitting main() up a little. De-hardcode suite numbers from SQL
+ queries and return quietly from do_nviu() if experimental doesn't
+ exist (i.e. non-US). Hardcode pcmcia-cs as dubious NBS since it
+ is.
+
+ * debian/control (Depends): remove python-zlib as it's obsolete.
+
+ * charisma (main): don't slice the \n off strings when we're
+ strip()-ing it anyway.
+ * heidi (set_suite): likewise.
+ (process_file): likewise.
+ * natalie (process_file): likewise.
+
+2003-04-08 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.check_dsc_against_db): improve the speed of two
+ slow queries by using one LIKE '%foo%' and then matching against
+ '%s' or '/%s$' in python. Also only join location when we need it
+ (i.e. the .orig.tar.gz query). On auric, this knocks ~3s of each
+ query, so 6s for each sourceful package.
+
+ * cron.daily: invoke rene and send the report to ftpmaster.
+ * cron.daily-non-US: likewise.
+
+2003-03-14 James Troup <james@nocrew.org>
+
+ * utils.py (send_mail): default filename to blank.
+ * amber (make_advisory): adapt.
+ * jennifer (acknowledge_new): likewise.
+ * katie.py (Katie.close_bugs): likewise.
+ (Katie.announce): likewise.
+ (Katie.accept): likewise.
+ (Katie.check_override): likewise.
+ (Katie.do_reject): likewise.
+ * kelly (do_reject): likewise.
+ (stable_install): likewise.
+ * lisa (do_bxa_notification): likewise.
+ * lauren (reject): likewise.
+ * melanie (main): likewise.
+
+ * rene (add_nbs): check any NBS packages against unstable to see
+ if they haven't been removed already.
+
+ * templates/katie.rejected: remove paragraph about rejected files
+ since they're o-rwx due to c-i-m and the uploader can't do
+ anything about them and shania will take care of them anyway.
+
+ * madison (usage): update usage example to use comma seperation.
+ * melanie (usage): likewise.
+
+ * utils.py (split_args): new function; splits command line
+ arguments either by space or comma (whichever is used). Also has
+ optional-but-default DWIM spurious space detection to avoid
+ 'command -a i386, m68k' problems.
+ (parse_args): use it.
+ * melanie (main): likewise.
+
+ * melanie (main): force the admin to tell someone if we're not
+ doing a rene-led removal (or closing a bug, which counts as
+ telling someone).
+
+2003-03-05 James Troup <james@nocrew.org>
+
+ * katie.conf (Section): add embedded, gnome, kde, libdevel, perl
+ and python sections.
+ * katie.conf-security (Section): likewise.
+
+ * add_constraints.sql: add uid and uid_id_seq to grants.
+
+ * lisa (determine_new): also warn about adding overrides to
+ oldstable.
+
+ * madison (main): make the -S/--source-and-binary query obey
+ -s/--suite restrictions.
+
+2003-03-03 James Troup <james@nocrew.org>
+
+ * madison (main): if the Archive_Maintenance_In_Progress lockfile
+ exists, warn the user that our output might seem strange. (People
+ get confused by multiple versions in a suite which happens
+ post-kelly but pre-jenna.)
+
+2003-02-21 James Troup <james@nocrew.org>
+
+ * kelly (main): we don't need to worry about StableRejector.
+
+ * melanie (main): sort versions with apt_pkg.VersionCompare()
+ prior to output.
+
+ * lauren: new script to manually reject packages from
+ proposed-updates. Updated code from pre-NI kelly (nee katie).
+
+2003-02-20 James Troup <james@nocrew.org>
+
+ * kelly (init): remove unused -m/--manual-reject argument.
+
+ * katie.py (Katie.force_reject): renamed from force_move to make
+ it more explicit what this function does.
+ (Katie.do_reject): update to match.
+
+ * utils.py (prefix_multi_line_string): add an optional argument
+ include_blank_lines which defaults to 0. If non-zero, blank lines
+ will be includes in the output.
+
+ * katie.py (Katie.do_reject): don't add leading space to each line
+ of the reject message. Include blank lines when showing the
+ message to the user.
+
+2003-02-19 Martin Michlmayr <tbm@cyrius.com>
+
+ * utils.py (fix_maintainer): replace pointless re.sub() with
+ simple string format.
+
+2003-02-11 James Troup <james@nocrew.org>
+
+ * lisa (edit_overrides): only strip-to-one-char and upper-case
+ non-numeric answers. Fixes editing of items with indices >= 10;
+ noticed by Randall.
+ (edit_overrides): correct order of arguments to "not a valid
+ index" error message.
+
+ * jenna (cleanup): call resolve_arch_all_vs_any() rather than
+ remove_duplicate_versions(); thanks to aj for the initial
+ diagnosis.
+ (remove_duplicate_versions): correct how we return
+ dominant_versions.
+ (resolve_arch_all_vs_any): arch_all_versions needs to be a list of
+ a tuple rather than just a tuple.
+
+2003-02-10 James Troup <james@nocrew.org>
+
+ * emilie: new script - sync fingerprint and uid tables with a
+ debian.org LDAP DB.
+
+ * init_pool.sql: new table 'uid'; contains user ids. Reference it
+ in 'fingerprint'.
+
+ * db_access.py (get_or_set_uid_id): new function.
+
+ * jennifer (main): update locking to a) not used FCNTL (deprecated
+ in python >= 2.2) and b) acknowledge upstream's broken
+ implementation of lockf (see Debian bug #74777), c) try to acquire
+ the lock non-blocking.
+ * kelly (main): likewise.
+
+ * contrib/python_1.5.2-fcntl_lockf.diff: obsolete, removed.
+
+ * madison (main): only append the package to new_packages if it's
+ not already in there; fixes -S/--source-and-binary for cases where
+ the source builds a binary package of the same name.
+
+2003-02-10 Anthony Towns <ajt@debian.org>
+
+ * madison (main): use explicit JOIN syntax for
+ -S/--source-and-binary queries to reduce the query's runtime from
+ >10 seconds to negligible.
+
+2003-02-08 James Troup <james@nocrew.org>
+
+ * rene (main): in the NVIU output, append items to lists, not
+ extend them; fixes amusing suggestion that "g n u m e r i c" (sic)
+ should be removed.
+
+2003-02-07 James Troup <james@nocrew.org>
+
+ * apt.conf (tree "dists/unstable"): Add bzip2-ed Packages and
+ Sources [aj].
+
+ * pseudo-packages.maintainers (bugs.debian.org): s/Darren
+ O. Benham/Adam Heath/.
+
+ * katie.conf (Suite::Stable::Version): bump to 3.0r1a.
+ (Suite::Stable::Description): update for 3.0r1a.
+ (Dinstall::SigningKeyIds): update for 2003 key [aj].
+
+ * utils.py (gpgv_get_status_output): rename from
+ get_status_output().
+
+ * neve (check_signature): use gpgv_get_status_output and Dict from
+ utils(). Add missing newline to error message about duplicate tokens.
+
+ * saffron (per_arch_space_use): also print space used by source.
+ (output_format): correct string.join() invocation.
+
+ * jennifer (check_signature): ignored duplicate EXPIRED tokens.
+
+2003-02-04 James Troup <james@nocrew.org>
+
+ * cron.buildd: correct generation of Packages/Sources and grep out
+ non-US/non-free as well as non-free.
+
+2003-02-03 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: generate quinn-diff output with full Packages/Sources
+ files to get out-of-date vs. uncompiled right.
+ * apt.conf.buildd: no longer generate uncompressed files, as they
+ are generated in cron.buildd instead
+ * add -i option to quinn-diff to ignore binary-all packages
+ * apt.conf.buildd: remove and readd udeb to extensions. If the udebs
+ aren't in the packages file, the arch that uploaded them will build
+ them anyways...
+
+2003-01-30 James Troup <james@nocrew.org>
+
+ * rene (main): only print suggested melanie command when there's
+ some NBS to remove.
+
+2003-01-30 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: fix incorrectly inverted lockfile check
+
+2003-01-29 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: generate override.sid.all3.src
+ * apt.conf.buildd: use generated override.sid.all3.src
+
+2003-01-27 Martin Michlmayr <tbm@cyrius.com>
+
+ * utils.py (get_status_output): moved from jennifer.
+ (Dict): likewise.
+ (check_signature): likewise.
+
+ * jennifer (get_status_output): moved to utils.py.
+ (Dict): likewise.
+ (check_signature): likewise.
+
+ * utils.py (check_signature): add an argument to specifiy which
+ function to call when an error was found.
+ (check_signature): document this function better.
+
+ * jennifer (check_files): pass the reject function as an argument
+ to utils.check_signature.
+ (process_it): likewise.
+
+2003-01-20 James Troup <james@nocrew.org>
+
+ * rene (main): lots of changes to improve the output and make it
+ more useful.
+
+ * katie.py (Katie.check_override): make the override messages
+ clearer (hopefully).
+
+2002-12-26 James Troup <james@nocrew.org>
+
+ * ziyi (usage): document the ability to pass suite(s) as
+ argument(s).
+ (main): read apt.conf after checking for -h/--help.
+
+ * tea (main): take the check to run as an argument.
+
+ * saffron.R: R script to graph daily install runs.
+
+ * saffron: new script; various stats functions.
+
+ * rhona (main): connect to the database after checking for -h/--help.
+
+ * neve (do_da_do_da): if no -a/--action option is given, bail out.
+
+ * melanie (main): sort versions with utils.arch_compare_sw().
+
+ * madison (usage): alphabetize order of options.
+ * melanie (usage): likewise.
+
+ * kelly (usage): fix usage short description (we aren't dinstall).
+
+ * julia (usage): fix usage description and alphabetize order of
+ options.
+
+ * jeri (usage): fix usage short description.
+
+ * jennifer (main): move --help and --version checks from here...
+ (init): to here so that they work with an empty katie.conf.
+ * kelly: likewise.
+
+ * alyson (usage): new function.
+ (main): use it.
+ * andrea: likewise.
+ * ashley: likewise.
+ * cindy: likewise.
+ * denise: likewise.
+ * helena: likewise.
+ * neve: likewise.
+ * rene: likewise.
+ * rose: likewise.
+ * tea: likewise.
+
+ * apt.conf.stable (tree "dists/stable"): add missing ExtraOverride
+ entry that caused tasks to be omitted from 3.0r1.
+
+2002-12-10 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): sanity check the Depends field to ensure
+ it's non-empty if present since apt chokes on an empty one.
+ Thanks to Ryan Murray for the idea.
+
+2002-12-08 James Troup <james@nocrew.org>
+
+ * katie.conf-security (Helena::Directories): new; include accepted
+ in addition to byhand and new.
+
+ * helena (process_changes_files): use utils.arch_compare_sw().
+ Justify things based on the longest [package, version,
+ architecture]. Reduce '[note]' to '[N]' to save space, and remove
+ the commas in architecture and version lists for the same reason.
+ (main): make directories we process configurable through
+ Helena::Directories in the config file; if that doesn't exist
+ default to the old hardcoded values (byhand & new).
+
+ * utils.py (arch_compare_sw): moved here from madison.
+ * madison (main): adjust to compensate.
+
+2002-12-06 James Troup <james@nocrew.org>
+
+ * ziyi (main): fix "suite foo not in apt.conf" msg to use the
+ right filename.
+
+2002-12-05 James Troup <james@nocrew.org>
+
+ * katie.conf-non-US (Julia::KnownPostgres): add 'udmsearch'.
+
+2002-11-28 Randall Donald <rdonald@debian.org>
+
+ * fernanda.py (read_control): fix typo of 'Architecture'.
+
+2002-11-26 James Troup <james@nocrew.org>
+
+ * lisa (check_pkg): call less with '-R' so we see the colour from
+ Randall's fernanda changes.
+
+ * neve (process_sources): if Directory points to a legacy location
+ but the .dsc isn't there; assume it's broken and look in the pool.
+ (update_section): new, borroed from alyson.
+ (do_da_do_da): use it.
+ (process_packages): add suite_it to the cache key used for
+ arch_all_cache since otherwise we only add a package to the first
+ suite it's in and ignore any subsequent ones.
+
+ * katie.conf-non-US (Location): fixed to reflect reality (all
+ suites, except old-proposed-updates (which is legacy-mixed)) are
+ pool.
+
+ * utils.py (try_with_debug): wrapper for print_exc().
+ * jenna (main): use it.
+ * neve (main): likewise.
+
+2002-11-25 Randall Donald <rdonald@debian.org>
+
+ * fernanda.py (main): added -R to less command line for raw control
+ character support to print colours
+ (check_deb): Instead of running dpkg -I on deb file, call
+ output_deb_info, the new colourized control reporter.
+ (check_dsc): add call to colourized dsc info reader, read_dsc, instead
+ of printing out each .dsc line.
+ (output_deb_info): new function. Outputs each key/value pair from
+ read_control except in special cases where we highlight section,
+ maintainer, architecture, depends and recommends.
+ (create_depends_string): new function. Takes Depends tree and looks
+ up it's compontent via projectb db, colourizes and constructs a
+ depends string in original order.
+ (read_dsc): new function. reads and parses .dsc info via
+ utils.parse_changes. Build-Depends and Build-Depends-Indep are
+ colourized.
+ (read_control): new function. reads and parses control info via
+ apt_pkg. Depends and Recommends are split in to list structures,
+ Section and Architecture are colourized. Maintainer is colourized
+ if it has a localhost.localdomain address.
+ (split_depends): new function. Creates a list of lists of
+ dictionaries of depends (package,version relation). Top list is
+ colected from comma delimited items. Sub lists are | delimited.
+ (get_comma_list): new function. splits string input among commas
+ (get_or_list): new function. splits string input among | delimiters
+ (get_depends_parts): new function. Creates dictionary of package name
+ and version relation from dependancy string.
+ Colours for section and depends are per component. Unfound depends
+ are in bold. Lookups using version info is not supported yet.
+
+2002-11-22 James Troup <james@nocrew.org>
+
+ * katie.conf-security (Julia::KnownPostgres): add 'www-data' and
+ 'udmsearch'.
+
+ * amber (make_advisory): string.atol() is deprecated and hasn't
+ been ported to string methods. Use long() instead.
+
+ * init_pool.sql: explicitly specify the encoding (SQL_ASCII) when
+ creating the database since we'll fail badly if it's created with
+ e.g. UNICODE encoding.
+
+ * rose (main): AptCnf is a global.
+
+ * neve (get_location_path): new function determines the location
+ from the the first (left-most) directory of a Filename/Directory.
+ (process_sources): don't need 'location' anymore. Use
+ utils.warn(). Use the Directory: field for each package to find
+ the .dsc. Use get_location_path() to determine the location for
+ each .dsc.
+ (process_packages): do't need 'location' anymore. Use
+ utils.warn(). Use get_location_path().
+ (do_sources): don't need 'location', drop 'prefix' in favour of
+ being told the full path to the Sources file, like
+ process_packages().
+ (do_da_do_da): main() renamed, so that main can call us in a
+ try/except. Adapt for the changes in do_sources() and
+ process_packages() above. Assume Sources and Packages file are in
+ <root>/dists/<etc.>. Treat pool locations like we do legacy ones.
+
+ * katie.conf-security (Location): fixed to reflect reality (all
+ suites are pool, not legacy).
+
+ * utils.py (print_exc): more useful (i.e. much more verbose)
+ traceback; a recipe from the Python cookbook.
+ * jenna (main): use it.
+ * neve (main): likewise.
+
+2002-11-19 James Troup <james@nocrew.org>
+
+ * kelly (install): fix brain-damaged CopyChanges/CopyKatie
+ handling which was FUBAR for multi-suite uploads. Now we just
+ make a dictionary of destinations to copy to and iterate over
+ those.
+
+ * fernanda.py (check_deb): run linda as well as lintian.
+
+2002-10-21 James Troup <james@nocrew.org>
+
+ * melanie (main): change X-Melanie to X-Katie and prefix it with
+ 'melanie '.
+
+ * lisa (main): prefix X-Katie with 'lisa '.
+
+ * jennifer (clean_holding): fix typo in string method changes;
+ s/file.find(file/file.find(/.
+
+ * cron.daily: invoke helena and send the report to ftpmaster.
+ * cron.daily-non-US: likewise.
+
+2002-10-16 James Troup <james@nocrew.org>
+
+ * kelly (check): call reject() with a blank prefix when parsing
+ the return of check_dsc_against_db() since it does its own
+ prefix-ing.
+
+ * rose: new script; only handles directory creation initally.
+
+ * katie.conf (Dinstall::NewAckList): obsolete, removed.
+ * katie.conf-non-US (Dinstall::NewAckList): likewise.
+
+2002-10-06 James Troup <james@nocrew.org>
+
+ * rene (main): remove bogus argument handling.
+
+ * kelly: katie, renamed.
+ * cron.daily: adapt for katie being renamed to kelly.
+ * cron.daily-non-US: likewise.
+ * amber (main): likewise.
+
+ * Changes for python 2.1.
+
+ * kelly: time.strftime no longer requires a second argument of
+ "time.localtime(time.time())".
+ * logging.py: likewise.
+ * rhona: likewise.
+ * shania (init): likewise.
+
+ * amber: use augmented assignment.
+ * catherine (poolize): likewise.
+ * claire.py (fix_component_section): likewise.
+ * halle (check_changes): likewise.
+ * helena: likewise.
+ * jenna: likewise.
+ * jennifer: likewise.
+ * jeri: likewise.
+ * katie.py: likewise.
+ * kelly: likewise.
+ * lisa: likewise.
+ * madison (main): likewise.
+ * melanie: likewise.
+ * natalie: likewise.
+ * neve: likewise.
+ * rhona: likewise.
+ * tea: likewise.
+ * utils.py: likewise.
+ * ziyi: likewise.
+
+ * amber: use .endswith.
+ * fernanda.py: likewise.
+ * halle (main): likewise.
+ * jennifer: likewise.
+ * jeri: likewise.
+ * katie.py: likewise.
+ * kelly: likewise.
+ * lisa: likewise.
+ * neve: likewise.
+ * shania (main): likewise.
+ * utils.py: likewise.
+
+ * alyson: use string methods.
+ * amber: likewise.
+ * andrea: likewise.
+ * ashley: likewise.
+ * catherine: likewise.
+ * charisma: likewise.
+ * claire.py: likewise.
+ * db_access.py: likewise.
+ * denise: likewise.
+ * halle: likewise.
+ * heidi: likewise.
+ * helena: likewise.
+ * jenna: likewise.
+ * jennifer: likewise.
+ * jeri: likewise.
+ * julia: likewise.
+ * katie.py: likewise.
+ * kelly: likewise.
+ * lisa: likewise.
+ * logging.py: likewise.
+ * madison: likewise.
+ * melanie: likewise.
+ * natalie: likewise.
+ * neve: likewise.
+ * rene: likewise.
+ * tea: likewise.
+ * utils.py: likewise.
+ * ziyi: likewise.
+
+2002-09-20 Martin Michlmayr <tbm@cyrius.com>
+
+ * utils.py (parse_changes): use <string>.startswith() rather than
+ string.find().
+
+2002-08-27 Anthony Towns <ajt@debian.org>
+
+ * katie.py (in_override_p): when searching for a source override,
+ and the dsc query misses, search for both udeb and deb overrides
+ as well. Should fix the UNACCEPT issues with udebs.
+
+2002-08-24 James Troup <james@nocrew.org>
+
+ * melanie (main): remove gratuitous WHERE EXISTS sub-select from
+ source+binary package finding code which was causing severe
+ performance degradation with postgres 7.2.
+
+2002-08-14 James Troup <james@nocrew.org>
+
+ * julia (main): use the pwd.getpwall() to get system user info
+ rather than trying to read a password file. Add a -n/--no-action
+ option.
+
+ * cron.hourly: julia no longer takes any arguments.
+ * cron.hourly-non-US: likewise.
+
+2002-08-07 James Troup <james@nocrew.org>
+
+ * katie (install): handle multi-suite uploads when CopyChanges
+ and/or CopyKatie are in use, ensuring we only copy stuff once.
+
+2002-08-01 Ryan Murray <rmurray@debian.org>
+
+ * wanna-build/trigger.daily: initial commit, with locking
+ * cron.buildd: add locking against daily run
+
+2002-07-30 James Troup <james@nocrew.org>
+
+ * melanie (main): readd creation of suite_ids_list so melanie is
+ remotely useful again.
+
+ * katie.conf: adopt for woody release; diable
+ StableDislocationSupport, add oldstable, adjust other suites and
+ mappings, fix up location.
+ * katie.conf-non-US: likewise.
+ * katie.conf-security: likewise.
+
+ * apt.conf.stable: adapt for woody release; add oldstable, adjust
+ stable.
+ * apt.conf.stable-non-US: likewise.
+
+ * apt.conf-security: adapt for woody release; adding oldstable,
+ oldstable, adjust stable and testing.
+ * cron.daily-security: likewise.
+ * cron.buildd-security: likewise.
+
+ * apt.conf: adapt for woody release; rename woody-proposed-updates
+ to testing-proposed-updates and proposed-updates to
+ old-proposed-updates.
+ * apt.conf-non-US: likewise.
+
+ * vars-non-US (copyoverrides): add sarge.
+ * vars (copyoverrides): likewise.
+
+ * vars-security (suites): add oldstable.
+
+2002-07-22 Ryan Murray <rmurray@debian.org>
+
+ * apt.conf.security-buildd: use suite codenames instead of
+ distnames.
+
+2002-07-16 James Troup <james@nocrew.org>
+
+ * denise (main): fix filenames for testing override files.
+
+2002-07-14 James Troup <james@nocrew.org>
+
+ * jennifer (process_it): call check_md5sums later so we can check
+ files in the .dsc too
+ (check_md5sums): check files in the .dsc too. Check both md5sum
+ and size.
+
+ * melanie (main): use parse_args() and join_with_commas_and() from
+ utils. If there's nothing to do, say so and exit, don't ask for
+ confirmation etc.
+
+ * amber (join_with_commas_and): moved from here to ...
+ * utils.py (join_with_commas_and): here.
+
+2002-07-13 James Troup <james@nocrew.org>
+
+ * madison (main): use parse_args() from utils. Support
+ -c/--component.
+
+ * jenna (parse_args): moved from here to ...
+ * utils.py (parse_args): here.
+
+ * katie.conf (Architectures): minor corrections to the description
+ for arm, mips and mipsel.
+ * katie.conf-non-US (Architectures): likewise.
+ * katie.conf-security (Architectures): likewise.
+
+ * cron.daily-security: use natalie's new -a/--add functionality to
+ flesh out the security overrides.
+
+2002-07-12 James Troup <james@nocrew.org>
+
+ * cron.buildd (ARCHS): add arm.
+
+ * katie.conf: 2.2r7 was released.
+ * katie.conf-non-US: likewise.
+
+ * utils.py (parse_changes): handle a multi-line field with no
+ starting line.
+
+2002-06-25 James Troup <james@nocrew.org>
+
+ * templates/amber.advisory (To): add missing email address since
+ __WHOAMI__ is only a name.
+
+ * katie.conf-security (Melane::LogFile): correct to go somewhere
+ katie has write access to.
+ (Location::/org/security.debian.org/ftp/dists/::Suites): add
+ Testing.
+
+ * natalie: add support for -a/-add which adds packages only
+ (ignoring changes and deletions).
+
+ * katie.py (Katie.announce): Dinstall::CloseBugs is a boolean so
+ use FindB, not get.
+
+2002-06-22 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): validate the package name and version
+ field. If 'Package', 'Version' or 'Architecture' are missing,
+ don't try any further checks.
+ (check_dsc): likewise.
+
+ * utils.py (re_taint_free): add '~' as a valid character.
+
+2002-06-20 Anthony Towns <ajt@debian.org>
+
+ * katie.conf-non-US: add OverrideSuite for w-p-u to allow uploads
+
+2002-06-09 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): reduce useless code.
+
+ * cron.daily-security: run symlinks -dr on $ftpdir.
+
+ * vars-security (ftpdir): add.
+
+2002-06-08 James Troup <james@nocrew.org>
+
+ * neve (update_override_type): transaction is handled higher up in
+ main().
+ (update_priority): likewise.
+ (process_sources): remove code that makes testing a duplicate of
+ stable.
+ (process_packages): likewise.
+
+ * templates/amber.advisory: add missing mail headers.
+
+ * cron.daily-security: also call apt-ftparchive clean for
+ apt.conf.buildd-security.
+ * cron.weekly: likewise.
+
+ * amber (do_upload): write out a list of source packages (and
+ their version) uploaded for testing.
+ (make_advisory): add more Subst mappings for the mail headers.
+ (spawn): check for suspicious characters in the command and abort
+ if their found.
+
+2002-06-07 James Troup <james@nocrew.org>
+
+ * ziyi (main): remove the 'nonus'/'security' hacks and use
+ Dinstall::SuiteSuffix (if it exists) instead. Always try to write
+ the lower level Release files, even if they don't exist. fubar
+ out if we can't open a lower level Release file for writing.
+
+ * katie.conf-non-US (Dinstall): add SuiteSuffix, used to simplify
+ ziyi.
+ * katie.conf-security (Dinstall): likewise.
+
+ * amber (do_upload): renamed from get_file_list(). Determine the
+ upload host from the original component.
+ (init): Add a -n/--no-action option. Fix how we get changes_files
+ (i.e. from the return value of apt_pkg.ParseCommandLine(), not
+ sys.argv). Add an Options global.
+ (make_advisory): support -n/--no-action.
+ (spawn): likewise.
+ (main): likewise.
+ (usage): document -n/--no-action.
+
+ * cron.buildd-security: fix path to Packages-arch-specific in
+ quinn-diff invocation.
+
+ * katie.conf-security (Dinstall::AcceptedAutoBuildSuites): change
+ to proper suite names (i.e. stable, testing) rather than codenames
+ (potato, woody).
+ (Dinstall::DefaultSuite): likewise.
+ (Suite): likewise.
+ (Location::/org/security.debian.org/ftp/dists/::Suites): likewise.
+ * vars-security (suites): likewise.
+ * apt.conf-security: likewise.
+
+ * katie.conf-security (Component): add "updates/" prefix.
+ (Suite::*::Components): likewise.
+ (ComponentMappings): new; map all {ftp-master,non-US} components
+ -> updates/<foo>.
+
+ * katie.conf-security (Natalie): removed; the options have
+ defaults and ComponentPosition is used by alyson which doesn't
+ work on security.d.o.
+ (Amber): replace UploadHost and UploadDir with ComponentMappings
+ which is a mapping of components -> URI.
+ (Suite::*::CodeName): strip bogus "/updates" suffix hack.
+ (SuiteMappings): use "silent-map" in preference to "map".
+
+ * cron.unchecked-security: fix call to cron.buildd-security.
+
+ * cron.daily-security: map local suite (stable) -> override suite
+ (potato) when fixing overrides. Correct component in natalie call
+ to take into account "updates/" prefix. Fix cut'n'waste in
+ override.$dist.all3 generation, the old files weren't being
+ removed, so they were endlessly growing.
+
+ * neve (main): don't use .Find for the CodeName since we require
+ it. Location::*::Suites is a ValueList.
+ (check_signature): ignore duplicate SIGEXPIRED tokens. Don't bomb
+ out on expired keys, just warn.
+ (update_override_type): new function; lifted from alyson.
+ (update_priority): likewise.
+ (main): use update_{override_type,priority}().
+
+ * jennifer (check_distributions): remove redunant test for
+ SuiteMappings; ValueList("does-not-exist") returns [] which is
+ fine. Add support for a "silent-map" type which doesn't warn
+ about the mapping to the user.
+ (check_files): add support for ComponentMappings, similar to
+ SuiteMappings, but there's no type, just a source and a
+ destination and the original component is stored in "original
+ component".
+ * katie.py (Katie.dump_vars): add "original component" as an
+ optionsal files[file] dump variable.
+
+ * claire.py (find_dislocated_stable): dehardcode 'potato' in SQL
+ query. Add support for section-less legacy locations like current
+ security.debian.org through YetAnotherConfigBoolean
+ 'LegacyStableHasNoSections'.
+ * katie.conf-security (Dinstall): LegacyStableHasNoSections is true.
+
+ * utils.py (real_arch): moved here from ziyi.
+ * ziyi (real_arch): moved to utils.py.
+ * ziyi (main): likewise.
+
+ * claire.py (find_dislocated_stable): use real_arch() with
+ filter() to strip out source and all.
+ * neve (main): likewise.
+ * rene (main): likewise.
+ * jeri (parse_packages): likewise.
+
+2002-06-06 James Troup <james@nocrew.org>
+
+ * tea (check_missing_tar_gz_in_dsc): modifed patch from Martin
+ Michlmayr <tbm@cyrius.com> to be more verbose about what we're
+ doing.
+
+2002-05-23 Martin Michlmayr <tbm@cyrius.com>
+
+ * jeri (check_joey): check if the line contains two elements
+ before accessing the second. Also, strip trailing spaces as well
+ as the newline.
+ * halle (check_joey): likewise.
+
+2002-06-05 James Troup <james@nocrew.org>
+
+ * cron.unchecked-security: new file; like cron.unchecked but if
+ there's nothing to do exit so we don't call cron.buildd-security.
+
+ * apt.conf.buildd-security: new file.
+
+ * vars (archs): alphabetize.
+ * vars-non-US (archs): likewise.
+
+ * vars-security: add unchecked.
+
+ * madison (main): reduce rather bizarrely verbose and purposeless
+ code to print arches to a simple string.join.
+
+ * katie.conf (Suites::Unstable): add UdebComponents, a new
+ valuelist of suites, used by jenna to flesh out the list of
+ <suite>_main-debian-installer-binary-<arch>.list files generated.
+ (Dinstall): add StableDislocationSupport, a new boolean used by
+ jenna to enable or disable stable dislocation support
+ (i.e. claire), as true.
+
+ * katie.conf (Dinstall): add StableDislocationSupport, a new
+ boolean used by jenna to enable or disable stable dislocation
+ support (i.e. claire), as true.
+ * katie.conf-non-US: likewise.
+ * katie.conf-security: likewise.
+
+ * cron.daily-security: generate .all3 overrides for the buildd
+ support. Freshen a local copy of Packages-arch-specific from
+ buildd.debian.org.
+
+ * claire.py (find_dislocated_stable): disable the support for
+ files in legacy-mixed locations since none of the Debian archives
+ have any anymore.
+
+ * helena: new script; produces a report on NEW and BYHAND
+ packages.
+
+ * jenna: rewritten from scratch to fix speed problems. Run time
+ on auric goes down from 31.5 minutes to 3.5 minutes. Of that 3.5
+ minutes, 105 seconds are the monster query and 70 odd seconds is
+ claire.
+
+ * apt.conf.buildd (Default): remove MaxContentsChange as it's
+ irrelevant.
+
+2002-06-05 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd-security: new file.
+
+2002-06-05 Matt Kraai <kraai@alumni.cmu.edu>
+
+ * denise (list): take a file argument and use it.
+ (main): don't abuse sys.stdout, just write to the file.
+
+ * claire.py (usage): Fix misspelling.
+ (clean_symlink): Simplify.
+ (find_dislocated_stable): Avoid unnecessary work.
+
+2002-05-29 James Troup <james@nocrew.org>
+
+ * cameron: removed; apt-ftparchive can simply walk the directory.
+
+2002-05-26 Anthony Towns <ajt@debian.org>
+
+ * katie.conf{,-non-US}: Map testing to testing-proposed-updates
+ for the autobuilders.
+
+2002-05-24 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: update override files before running apt-ftparchive
+
+2002-05-23 Martin Michlmayr <tbm@cyrius.com>
+
+ * amber (main): remove extra space in prompt.
+
+ * utils.py (validate_changes_file_arg): use original filename in
+ error messages.
+
+ * jeri (check_joey): close file after use.
+ (parse_packages): likewise.
+ (main): setup debug option properly.
+
+ * melanie (main): remove unused packages variable and simplify the
+ code to build up con_packages by using repr().
+
+2002-05-23 James Troup <james@nocrew.org>
+
+ * lisa (recheck): when we reject, also return 0 so the package is
+ skipped.
+ (sg_compare): fix note sorting.
+ (recheck): remove the .katie file after rejection.
+
+ * katie.py (Katie.accept): accepted auto-build support take 3;
+ this time adding support for security. Security needs a) non-pool
+ files copied rather than symlinked since accepted is readable only
+ by katie/security and www-data needs to be able to see the files,
+ b) needs per-suite directories. SpecialAcceptedAutoBuild becomes
+ AcceptedAutoBuildSuites and is a ValueList containing the suites.
+ SecurityAcceptedAutoBuild is a new boolean which controls whether
+ or not normal or security style is used. The unstable_accepted
+ table was renamed to accepted_autobuild and a suite column added.
+ Also fix a bug noticed by Ryan where an existent orig.tar.gz
+ didn't have it's last_used/in_accepted flags correctly updated.
+ * katie (install): likewise.
+ * rhona (clean_accepted_autobuild): likewise.
+
+2002-05-22 James Troup <james@nocrew.org>
+
+ * lisa (sort_changes): new function; sorts changes properly.
+ Finally.
+ (sg_compare): new function; helper for sort_changes(). Sorts by
+ have note and time of oldest upload.
+ (indiv_sg_compare): new function; helper for sort_changes().
+ Sorts by source version, have source and filename.
+ (main): use sort_changes().
+ (changes_compare): obsoleted; removed.
+
+2002-05-20 James Troup <james@nocrew.org>
+
+ * rhona (clean_accepted_autobuild): don't die if a file we're
+ trying to remove doesn't exist. Makes rhona more friendly to
+ katie/katie.py crashes/bugs without any undue cost.
+
+2002-05-19 James Troup <james@nocrew.org>
+
+ * lisa (main): if sorting a large number of changes give some
+ feedback.
+ (recheck): new function, run the same checks (modulo NEW,
+ obviously) as katie does, if they fail do the standard
+ reject/skip/quit dance.
+ (do_pkg): use it.
+
+ * katie (install): don't try to unlink the symlink in the
+ AcceptedAutoBuild support if the destination is not a symlink (or
+ doesn't exist). Avoids unnecessary bombs on previous partial
+ accepts and will still bomb hard if the file exists and isn't a
+ symlink.
+
+ * utils.py: blah, commands _is_ used when the mail stuff isn't
+ commented out like it is in my test environment.
+
+ * lisa (changes_compare): "has note" overrides everything else.
+ Use .katie files rather than running parse_changes, faster and
+ allows "has note" to work. Correct version compare, it was
+ reversed. Ctime check should only kick in if the source packages
+ are not the same.
+ (print_new): print out and return any note. Rename 'ret_code' to
+ 'broken'.
+ (edit_new): renamed from spawn_editor. Don't leak file
+ descriptors. Clean up error message if editor fails.
+ (edit_note): new function, allows one to edit notes.
+ (do_new): add note support, editing and removing.
+ (init): kill -s/--sort; with notes we always want to use our
+ sorting method.
+ (usage): likewise.
+
+ * katie.py (Katie.dump_vars): add "lisa note" as an optional
+ changes field.
+
+ * utils.py (build_file_list): rename 'dsc' to 'is_a_dsc' and have
+ it default to 0. Adapt tests to assume it's boolean.
+ * fernanda.py (check_changes): adjust call appropriately.
+ * halle (check_changes): likewise.
+ * jennifer (check_changes): likewise.
+ * jeri (check_changes): likewise.
+ * shania (flush_orphans): likewise.
+
+ * jennifer (check_dsc): pass is_a_dsc by name when calling
+ build_file_list() for clarity.
+ * shania (flush_orphans): likewise.
+ * tea (check_missing_tar_gz_in_dsc): likewise.
+
+ * jennifer (check_dsc): pass dsc_whitespace_rules by name when
+ calling parse_changes() for clarity.
+ * tea (check_dscs): likewise.
+
+ * utils.py (parse_changes): make dsc_whitespace_rules default to
+ not true.
+ * halle (check_changes): adjust call appropriately.
+ * jennifer (check_changes): likewise.
+ * jeri (check_changes): likewise.
+ * lisa (changes_compare): likewise.
+ * utils.py (changes_compare): likewise.
+ * melanie (main): likewise.
+ * shania (flush_orphans): likewise.
+ * fernanda.py (check_changes): likewise.
+
+2002-05-18 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.dump_vars): make the .katie file unreadable,
+ it's not useful and by and large a duplication of information
+ available in readable format in other files.
+
+2002-05-16 Ryan Murray <rmurray@debian.org>
+
+ * melanie: Dir::TemplatesDir -> Dir::Templates
+
+2002-05-15 Ryan Murray <rmurray@debian.org>
+
+ * cameron: correct the use of os.path.join
+
+2002-05-15 Anthony Towns <ajt@debian.org>
+
+ * ziyi: Update to match the new format for Architectures/Components
+ in katie.conf.
+
+2002-05-14 James Troup <james@nocrew.org>
+
+ * amber: new script; 'installer' wrapper script for the security
+ team.
+
+ * katie.py (Katie.announce): remove unused 'dsc' local
+ variable. (pychecker)
+
+ * ziyi: pre-define AptCnf and out globals to None. (pychecker)
+
+ * neve: don't import sys, we don't use it. (pychecker)
+ (check_signature): fix return type mismatch. (pychecker)
+
+ * utils.py: don't import commands, we don't use it. (pychecker)
+
+ * katie (install): SpecialAcceptedAutoBuild is a boolean.
+
+ * katie.py (Katie.dump_vars): don't store "oldfiles", it's
+ obsoleted by the change to "othercomponents" handling in jennifer
+ detailed below.
+ (Katie.cross_suite_version_check): new function; implements
+ cross-suite version checking rules specified in the conf file
+ while also enforcing the standard "must be newer than target
+ suite" rule.
+ (Katie.check_binary_against_db): renamed, since it's invoked once
+ per-binary, "binaries" was inaccurate. Use
+ cross_suite_version_check() and don't bother with the "oldfiles"
+ rubbish as jennifer works out "othercomponents" herself now.
+ (Katie.check_source_against_db): use cross_suite_version_check().
+
+ * katie (check): the version and file overwrite checks
+ (check_{binary,source,dsc}_against_db) are not per-suite.
+
+ * jennifer (check_files): less duplication of
+ 'control.Find("Architecture", "")' by putting it in a local
+ variable.
+ (check_files): call check_binary_against_db higher up since it's
+ not a per-suite check.
+ (check_files): get "othercomponents" directly rather than having
+ check_binary_against_db do it for us.
+
+ * heidi (main): 'if x:', not 'if x != []:'.
+ * katie.py (Katie.in_override_p): likewise.
+ (Katie.check_dsc_against_db): likewise.
+ * natalie (main): likewise.
+ * rene (main): likewise.
+ * ziyi (real_arch): likewise.
+
+ * alyson (main): Suite::%s::Architectures, Suite::%s::Components
+ and OverrideType are now value lists, not lists.
+ * andrea (main): likewise.
+ * cindy (main): likewise.
+ * claire.py (find_dislocated_stable): likewise.
+ * denise (main): likewise.
+ * jenna (main): likewise.
+ * jennifer (check_distributions): likewise.
+ (check_files): likewise.
+ (check_urgency): likewise (Urgency::Valid).
+ * jeri (parse_packages): likewise.
+ * neve (main): likewise (and Location::%s::Suites).
+ * rene (main): likewise.
+
+2002-05-13 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.check_source_against_db): correct case of reject
+ message to be consistent with binary checks.
+
+ * jennifer (get_status_output): don't leak 2 file descriptors per
+ invocation.
+ (check_signature): add missing '\n' to "duplicate status token"
+ error message.
+
+2002-05-09 James Troup <james@nocrew.org>
+
+ * utils.py (validate_changes_file_arg): new function; validates an
+ argument which should be a .changes file.
+ * ashley (main): use it.
+ * lisa (main): likewise.
+
+ * katie.py (Katie.check_dsc_against_db): since there can be more
+ than one .orig.tar.gz make sure we don't assume the .orig.tar.gz
+ entry still exists in files.
+
+ * jennifer (check_dsc): handle the .orig.tar.gz disappearing from
+ files, since check_dsc_against_db() deletes the .orig.tar.gz
+ entry.
+
+ * cameron: cleanups.
+
+ * utils.py (changes_compare): change sort order so that source
+ name and source version trump 'have source'; this should fix
+ UNACCEPT problems in katie where -1 hppa+source & i386, -2
+ i386&source & hppa lead to -1 i386 unaccept. Problem worked out
+ by Ryan.
+
+ * lisa (main): allow the arguments to be .katie files too.
+
+2002-05-07 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: add s390 to arch list again
+
+2002-05-05 Ryan Murray <rmurray@debian.org>
+
+ * cron.buildd: new script, update w-b database from unstable_accepted
+ table
+ * cameron: new script, take list in unstable_accepted and write out
+ a file list for apt-ftparchive
+ * apt.conf.buildd: new apt configuration for Packages/Sources for
+ unstable_accepted
+ * vars: add s390 to arch list.
+
+2002-05-03 James Troup <james@nocrew.org>
+
+ * neve (main): don't hard code the calling user as that doesn't
+ work with modern postgres installs. Fix psql invocation for
+ init_pool.sql (database name required). Dont' hard code the
+ database name.
+ (process_sources): add support for fingerprint and install_date.
+ (process_packages): add support for fingerprint.
+ (do_sources): pass in the directory, fingerprint support needs it.
+ (get_status_output): borrowed from jennifer.
+ (reject): likewise.
+ (check_signature): likewise.
+
+ * katie (install): only try to log urgencies if Urgency_Logger is
+ defined.
+ (main): only initialize Urgency_Logger is Dir::UrgencyLog is
+ defined; only close Urgency_Logger if it's defined.
+
+ * catherine (poolize): adapt for Dir rationalization.
+ * claire.py (find_dislocated_stable): likewise.
+ * denise (main): likewise.
+ * halle (check_joey): likewise.
+ * jenna: likewise.
+ * jennifer: likewise.
+ * jeri: likewise.
+ * katie.py: likewise.
+ * katie: likewise.
+ * lisa (do_bxa_notification): likewise.
+ * logging.py (Logger.__init__): likewise
+ * rene (main): likewise.
+ * rhona (clean): likewise.
+ * shania (init): likewise.
+ * tea: likewise.
+ * ziyi: likewise.
+
+ * lisa (add_overrides): Dinstall::BXANotify is a boolean, use
+ FindB, not FindI.
+
+ * rhona (clean_accepted_autobuild): SpecialAcceptedAutoBuild is a
+ boolean, use FindB, not get.
+
+ * katie.py (Katie.check_dsc_against_db): ignore duplicate
+ .orig.tar.gz's which are an exact (size/md5sum) match.
+
+ * ashley (main): really allow *.katie files as arguments too;
+ noticed by aj.
+
+ * sql-aptvc.cpp: postgres.h moved to a "server" subdirectory.
+
+2002-05-03 Anthony Towns <ajt@debian.org>
+
+ * ziyi: support for security.
+
+2002-05-02 James Troup <james@nocrew.org>
+
+ * jennifer (accept): call Katie.check_override() unconditional as
+ no-mail check moved into that function.
+ (do_byhand): likewise.
+
+ * katie.py (Katie.check_override): don't do anything if we're a)
+ not sending mail or b) the override disparity checks have been
+ disbled via Dinstall::OverrideDisparityCheck.
+
+ * jennifer (check_files): don't hard code Unstable as the suite
+ used to check for architecture validity; use
+ Dinstall::DefaultSuite instead, if it exists.
+ (accept): conditionalize
+
+ * katie.py (Katie.update_subst): support global maintainer
+ override with Dinstall::OverrideMaintainer.
+
+ * jennifer (check_distributions): new function, Distribution
+ validation and mapping. Uses new SuiteMappings variable from
+ config file to abstract suite mappings.
+ (check_changes): call it.
+
+ * natalie: renamed; nothing imports or likely will for some time.
+
+ * denise (main): remove unused natalie import and init().
+
+ * natalie.py (init): removed.
+ (main): initalize here instead and don't hardcode the database
+ name.
+
+2002-04-30 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.close_bugs): new function, split out from
+ announce().
+ (Katie.announce): only call close_bugs() if Dinstall::CloseBugs is
+ true.
+ (Katie.close_bugs): new function, split out
+ (Katie.close_bugs): return immediately if there are no bugs to
+ close.
+
+ * jennifer (acknowledge_new): adapt for new utils.TemplateSubst().
+ * katie (do_reject): likewise.
+ (stable_install): likewise.
+ * katie.py (Katie.announce): likewise.
+ (Katie.accept): likewise.
+ (Katie.check_override): likewise.
+ (Katie.do_reject): likewise.
+ * lisa (do_bxa_notification): likewise.
+ * melanie (main): likewise.
+
+ * utils.py (TemplateSubst): change second argument to be a
+ filename rather than a template since every caller opened a file
+ on the fly which was ugly and leaked file descriptor.
+
+2002-04-29 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.announce): (modified) patch from Raphael Hertzog
+ <hertzog@debian.org> to send 'accepted' announce mails to the
+ PTS. [#128140]
+
+2002-04-24 James Troup <james@nocrew.org>
+
+ * init_pool.sql (unstable_accepted): add two new fields to
+ unstable_accepted; in_accepted is a boolean indicating whether or
+ not the file is in accepted and last_used is a timestamp used by
+ rhona to determine when to remove symlinks for installed packages.
+
+ * katie.py (Katie.accept): auto-build support take 2. Create
+ symlinks for all files into a seperate directory. Add files to
+ unstable_accepted as paths to the new directory; mark them as
+ being in accepted for cameron. Properly conditionalize it on a
+ configuration variable.
+
+ * katie (install): likewise. Update symlinks to point into the
+ pool; mark the files for later deletion by rhona and mark them as
+ not being in accepted for cameron.
+
+ * rhona (clean_accepted_autobuild): new function.
+
+2002-04-22 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): handle db_access.get_location_id()
+ returning -1 properly/better.
+
+ * rhona (clean_fingerprints): new function.
+
+2002-04-21 James Troup <james@nocrew.org>
+
+ * utils.py (touch_file): unused; remove.
+ (plural): likewise.
+
+ * jennifer (check_files): close file descriptor used to get the
+ control file.
+ (check_md5sums): likewise.
+ (callback): likewise.
+
+ * katie.py (Katie.do_reject): handle manual rejects much better;
+ call the editor first and get confirmation from the user before
+ proceeding.
+
+ * jennifer (check_signature): prefix_multi_line_string() moved to
+ utils.
+
+ * utils.py (prefix_multi_line_string): moved here from jennifer.
+
+2002-04-20 James Troup <james@nocrew.org>
+
+ * lisa (main): handle non-existent files.
+
+ * ashley (main): allow *.katie files as arguments too.
+
+2002-04-19 James Troup <james@nocrew.org>
+
+ * katie.py (Katie.accept): add stuff to help auto-building from
+ accepted; if the .orig.tar.gz is not part of the upload (i.e. it's
+ in the pool), create a symlink to it in the accepted directory and
+ add the .dsc and .{u,}deb(s) to a new 'unstable_accepted' table.
+
+ * katie (install): undo the "auto-building from accepted" stuff
+ (i.e. remove the .orig.tar.gz symlink and remove the files from
+ unstable_accepted table).
+
+2002-04-16 James Troup <james@nocrew.org>
+
+ * jennifer (upload_too_new): fix typo which was causing all
+ timestamp comparisons to be against the .changes file. Also move
+ back to the original directory so we do the comparisons against
+ accurate timestamps.
+
+ * tea (check_missing_tar_gz_in_dsc): new function.
+
+ * jennifer (check_dsc): add a check to ensure there is a .tar.gz
+ file mentioned in the .dsc.
+
+ * lisa (main): use X-Katie in the mail headers, not X-Lisa; that
+ way mails reach debian-{devel-,}changes@l.d.o.
+
+2002-04-02 Ryan Murray <rmurray@debian.org>
+
+ * cron.daily: run shania after rhona
+ * cron.daily-non-US: likewise.
+
+2002-04-01 James Troup <james@nocrew.org>
+
+ * katie: re-add proposed-updates/stable install support.
+
+ * katie.py (Katie.dump_vars): add changes["changes"] as an
+ optional field; should be mandatory later.
+
+2002-03-31 James Troup <james@nocrew.org>
+
+ * katie (install): support a Suite::<foo>::CopyKatie similar to
+ CopyChanges. Done seperately because .katie files don't need to
+ be mirrored and will probably be copied to another directory as a
+ result.
+
+ * halle (main): add missing debug to options.
+
+2002-03-29 James Troup <james@nocrew.org>
+
+ * madison (main): add a -r/--regex option.
+
+2002-03-26 James Troup <james@nocrew.org>
+
+ * lisa: don't trample on changes["distribution"]; make a copy of
+ it as changes["suite"] instead and use that.
+
+2002-03-16 Anthony Towns <ajt@debian.org>
+
+ * templates/lisa.bxa_notification: Fix some grammatical errors.
+ Encourage contact via bxa@ftp-master email address.
+
+2002-03-15 James Troup <james@nocrew.org>
+
+ * jennifer (check_timestamps): remove bogus raise in except.
+
+2002-03-15 Anthony Towns <ajt@debian.org>
+
+ * cron.monthly: rotate mail/archive/bxamail as well as
+ mail/archive/mail. This is for a complete archive of
+ correspondence with the BXA.
+
+2002-03-14 Anthony Towns <ajt@debian.org>
+
+ * crypto-in-main changes.
+
+ * utils.py (move, copy): add an optional perms= parameter to let you
+ set the resulting permissions of the moved/copied file
+ * katie.py (force_move): rejected/morgued files should be unreadable
+ * jennifer (do_byhand, acknowledge_new): pending new and byhand files
+ should be unreadable.
+
+2002-03-07 Ryan Murray <rmurray@debian.org>
+
+ * katie (install): check for existance of "files id" key as well as
+ it being set to a valid value.
+ * katie (install): check for existense and valid value for location
+ id as well
+
+2002-03-05 Ryan Murray <rmurray@debian.org>
+
+ * katie.py (do_reject): reread the reason file after editing it.
+
+2002-02-25 James Troup <james@nocrew.org>
+
+ * jennifer (check_changes): don't enforce sanity in .changes file
+ names since it doesn't seem to be possible; pcmica-cs and similar
+ freak show packages in particular cause real problems.
+
+ * katie.py (Katie.check_dsc_against_db): initialize 'found' for
+ each dsc_file since the .orig.tar.gz checking code now uses it as
+ a boolean. Fixes bizarro rejections which bogusly claimed
+ .diff.gz md5sum/size was incorrect.
+
+2002-02-24 James Troup <james@nocrew.org>
+
+ * katie (process_it): reset reject_message.
+
+2002-02-22 James Troup <james@nocrew.org>
+
+ * db_access.py(set_files_id): disable use of
+ currval('files_id_seq') because it was taking 3 seconds on auric
+ which is insane (most calls take < 0.01) and simply call
+ get_files_id() for the return value instead.
+
+ * katie.py (Katie.do_query): convenience function; unused by
+ default, useful for profiling.
+ * db_access.py (do_query): likewise.
+
+ * katie (install): fix insert SQL call when binary has no source.
+
+ * lisa (determine_new): auto-correct non-US/main to non-US.
+ (determine_new): add a warning when adding things to stable.
+ (edit_index): use our_raw_input().
+ (edit_overrides): likewise.
+ (do_new): likewise. Use re.search() not re.match() since the
+ default answer may not be the first one.
+ (do_byhand): likewise.
+ (do_new): Default to 'S'kip and never 'A'dd.
+
+ * jennifer (action): pass prompt to our_raw_input().
+ * melanie (game_over): likewise.
+ * katie (action): likewise.
+
+ * utils.py (our_raw_input): add an optional prompt argument to
+ make the function more usable as a drop in replacement for
+ raw_input().
+
+ * jennifer (check_files): correct reject() to not double prefix
+ when using katie.py based functions.
+ (check_dsc): likewise.
+
+ * katie.py (Katie.reject): prepend a new line if appropriate
+ rathen than appending one to avoid double new lines when caller
+ adds one of his own.
+
+ * lisa (determine_new): warn if the package is also in other
+ components.
+
+2002-02-20 James Troup <james@nocrew.org>
+
+ * jennifer (check_files): if .changes file lists "source" in
+ Architecture field, there must be a .dsc.
+
+2002-02-15 James Troup <james@nocrew.org>
+
+ * ashley (main): add some missing fields.
+
+ * katie.py (Katie.check_dsc_against_db): fix to take into account
+ the fact that the .orig.tar.gz might be in byhand, accepted or
+ new. Also fix calling of reject().
+ (Katie.check_binaries_against_db): fix calling of reject().
+ (Katie.check_source_against_db): likewise.
+ (Katie.dump_vars): add missing variables used for bug closures.
+
+ * lisa (changes_compare_by_time): sort by reverse time.
+
+ * katie.py (Katie.accept): log.
+ (Katie.dump_vars): missing has_key test for optional changes fields.
+
+ * jennifer (main): print "Accepted blah blah" to stdout, not stderr.
+ (process_it): traceback goes to stderr, not stdout.
+ (acknowledge_new): log.
+ (do_byhand): likewise.
+
+ * katie.py (Katie.update_subst): fix typo (Cnf vs. self.Cnf).
+
+ * add_constraints.sql: add grants for the new fingerprint table.
+
+2002-02-13 James Troup <james@nocrew.org>
+
+ * katie (do_reject): basename the .changes filename before trying
+ to use it to construct the .reason filename.
+ (process_it): call Katie.update_subst() so do_reject() DTRT with
+ the mail template.
+ (do_reject): setup the mail template correctly.
+
+2002-02-12 James Troup <james@nocrew.org>
+
+ * tea (process_dir): renamed 'arg' to 'unused' for clarity.
+ (check_files): don't abuse global dictionaries.
+ (Ent): use all variables.
+ (check_timestamps): don't abuse global dictionaries.
+
+ * fernanda.py: renamed to .py so lisa can import it.
+ (check_dsc): remove unused local variables (pychecker).
+ (display_changes): split off from check_changes.
+
+ * katie: rewritten; most of the functionality moves to jennifer;
+ what's left is the code to install packages once a day from the
+ 'accepted' directory.
+
+ * jennifer: new program, processes packages in 'unchecked'
+ (i.e. most of the non-install functionality of old katie).
+
+ * katie.py: common functions shared between the clique of
+ jennifer, lisa and katie.
+
+ * lisa: new program; handles NEW and BYHAND packages.
+
+ * jeri (usage): new function.
+ (main): use it.
+ (check_package): remove unused local variable (pychecker).
+
+ * init_pool.sql: new table fingerprint. Add fingerprint colums to
+ binaries and source. Add install_date to source.
+
+ * halle (usage): new function.
+ (main): use it. Remove unused options.
+ (check_changes): remove unused local variable (pychecker).
+
+ * add_constraints.sql: add fingerprint references.
+
+ * db_access.py (get_or_set_fingerprint_id): new function.
+
+ * ashley (main): new program; dumps the contents of a .katie file
+ to stdout.
+
+ * alyson (main): remove option handling since we don't actually
+ support any.
+ * cindy (main): likewise.
+
+ * remove unnecessary imports and pre-define globals (pychecker).
+
+2002-02-11 Anthony Towns <ajt@debian.org>
+
+ * added installation-report and upgrade-report pseudo-packages
+
+2002-01-28 Martin Michlmayr <tbm@cyrius.com>
+
+ * katie (update_subst): use Dinstall::TrackingServer.
+ * melanie (main): likewise.
+
+2002-01-27 James Troup <james@nocrew.org>
+
+ * shania (main): it's IntLevel not IntVal; thanks to tbm@ for
+ noticing, jgg@ for fix.
+
+2002-01-19 James Troup <james@nocrew.org>
+
+ * utils.py (extract_component_from_section): handle non-US
+ non-main properly.
+
+2002-01-12 James Troup <james@nocrew.org>
+
+ * madison: add support for -S/--source-and-binary which displays
+ information for the source package and all it's binary children.
+
+2002-01-13 Anthony Towns <ajt@debian.org>
+
+ * katie.conf: Remove Catherine Limit and bump stable to 2.2r5
+ * katie.conf: Add Dinstall::SigningKeyIds option, set to the 2001
+ and 2002 key ids.
+ * katie.conf-non-US: Likewise.
+ * ziyi: Suppoer Dinstall::SigningKeyIds to sign a Release file with
+ multiple keys automatically. This is probably only useful for
+ transitioning from an expired (or revoked?) key.
+
+2002-01-08 Ryan Murray <rmurray@debian.org>
+
+ * debian/python-dep: new file that prints out python:Depends for
+ substvars
+ * debian/control: use python:Depends, build-depend on python
+ lower Depends: on postgresql to Suggests:
+ * debian/rules: determine python version, install to the correct
+ versioned dir
+
+2001-12-18 Anthony Towns <ajt@debian.org>
+
+ * ziyi: unlink Release files before overwriting them (in case they've
+ been merged)
+ * ziyi: always include checksums/sizes for the uncompressed versions
+ of Sources and Packages, even if they're not present on disk
+
+2001-11-26 Ryan Murray <rmurray@debian.org>
+
+ * ziyi (main): add SigningPubKey config option
+ * katie.conf: use SigningPubKey config option
+ * katie.conf-non-US: likewise
+
+2001-11-24 James Troup <james@nocrew.org>
+
+ * katie (acknowledge_new): log newness.
+
+2001-11-24 Anthony Towns <ajt@debian.org>
+
+ * ziyi (real_arch): bail out if some moron forgot to reset
+ untouchable on stable.
+ (real_arch): source Release files.
+
+2001-11-19 James Troup <james@nocrew.org>
+
+ * claire.py (main): don't use apt_pkg.ReadConfigFileISC and
+ utils.get_conf().
+ * shania (main): likewise.
+
+ * rhona (main): add default options.
+
+ * db_access.py (get_archive_id): case independent.
+
+ * katie (action): sort files so that ordering is consistent
+ between mails; noticed/requested by Joey.
+
+2001-11-17 Ryan Murray <rmurray@debian.org>
+
+ * utils.py: add get_conf function, change startup code to read all
+ config files to the Cnf that get_conf returns
+ use the component list from the katie conf rather than the hardcoded
+ list.
+ * all scripts: use new get_conf function
+ * shania: fix try/except around changes files
+ * jenna: only do debian-installer if it is a section in Cnf
+
+2001-11-16 Ryan Murray <rmurray@debian.org>
+
+ * shania (main): Initialize days to a string of a number.
+ (main): Initialize Cnf vars before reading in Cnf
+
+2001-11-14 Ryan Murray <rmurray@debian.org>
+
+ * shania (main): Initialize days to a number.
+
+2001-11-04 James Troup <james@nocrew.org>
+
+ * docs/Makefile: use docbook-utils' docbook2man binary.
+
+ * Change all "if foo == []" constructs into "if not foo".
+
+ * katie (check_changes): when installing into stable from
+ proposed-updates, remove all non-stable target distributions.
+ (check_override): don't check for override disparities on stable
+ installs.
+ (stable_install): update install_bytes appropriately.
+ (reject): stable rejection support; i.e. don't remove files when
+ rejecting files in the pool, rather remove them from the
+ proposed-update suite instead, rhona will do the rest.
+ (manual_reject): support for a stable specific template.
+ (main): setup up stable rejector in subst.
+
+2001-11-04 Martin Michlmayr <tbm@cyrius.com>
+
+ * debian/control (Build-Depends): docbook2man has been superseded
+ by docbook-utils.
+
+ * neve (main): exit with a more useful error message.
+ (update_suites): Suite::<suite>::Version, Origin and Description
+ are not required, so don't fail if they don't exist.
+
+ * db_access.py (get_archive_id): return -1 on error rather than
+ raise an exception.
+ (get_location_id): likewise.
+
+ * madison (main): don't exit on the first not-found package,
+ rather exit with an appropriate return code after processing all
+ packages.
+
+2001-11-03 James Troup <james@nocrew.org>
+
+ * claire.py (find_dislocated_stable): add per-architecture
+ symlinks for dislocated architecture: all debs.
+
+2001-10-19 Anthony Towns <ajt@debian.org>
+
+ * apt.conf*, katie.conf*: add mips, mipsel, s390 to testing.
+
+2001-10-10 Anthony Towns <ajt@debian.org>
+
+ * claire.py (fix_component_section): do _not_ assign to None under
+ any circumstances
+
+2001-10-07 Martin Michlmayr <tbm@cyrius.com>
+
+ * melanie (main): don't duplicate architectures when removing from
+ more than one suite.
+
+ * heidi (main, process_file, get_list): report suite name not ID.
+
+ * naima (nmu_p): be case insensitive.
+
+ * naima (action): more list handling clean ups.
+
+ * melanie (main): clean up lists handling to use string.join and
+ IN's.
+
+ * madison (main): clean up suite and architecture argument parsing
+ to use slices less and string.join more.
+
+ * utils.py (parse_changes): Use string.find() instead of slices for
+ string comparisons thereby avoid hardcoding the length of strings.
+ * ziyi (main): likewise.
+
+2001-10-07 James Troup <james@nocrew.org>
+
+ * Remove mode argument from utils.open_files() calls if it's the
+ default, i.e. 'r'.
+
+2001-09-27 James Troup <james@nocrew.org>
+
+ * katie (init): new function; options clean up.
+ (usage): add missing options, remove obsolete ones.
+ (main): adapt for the two changes above. If the lock file or
+ new-ack log file don't exist, create them. Don't try to open the
+ new-ack log file except running in new-ack mode.
+
+ * alyson (main): initialize all the tables that are based on the
+ conf file.
+
+ * utils.py (touch_file): like touch(1).
+ (where_am_i): typo.
+
+ * catherine (usage): new.
+ (main): use it. options cleanup.
+ * claire.py: likewise.
+ * fernanda: likewise.
+ * heidi: likewise.
+ * jenna: likewise.
+ * shania: likewise.
+ * ziyi: likewise.
+
+ * andrea: options cleanup.
+ * charisma: likewise.
+ * julia: likewise.
+ * madison: likewise.
+ * melanie: likewise.
+ * natalie: likewise.
+ * rhona: likewise.
+ * tea: likewise.
+
+2001-09-26 James Troup <james@nocrew.org>
+
+ * utils.py: default to sane config file locations
+ (/etc/katie/{apt,katie}.conf. They can be the actual config files
+ or they can point to the real ones through use of a new Config
+ section. Based on an old patch by Adam Heath.
+ (where_am_i): use the new default config stuff.
+ (which_conf_file): likewise.
+ (which_apt_conf_file): likewise.
+
+ * charisma (main): output defaults to
+ `Package~Version\tMaintainer'; input can be of either form. When
+ parsing the new format do version comparisons, when parsing the
+ old format assume anything in the extra file wins. This fixes the
+ problem of newer non-US packages being overwhelmed by older
+ versions still in stable on main.
+
+2001-09-17 James Troup <james@nocrew.org>
+
+ * natalie.py (list): use result_join().
+
+ * denise (main): result_join() moved to utils.
+
+ * utils.py (result_join): move to utils; add an optional seperator
+ argument.
+
+2001-09-14 James Troup <james@nocrew.org>
+
+ * heidi (set_suite): new function; does --set like natalie does,
+ i.e. turns it into a sequence of --add's and --remove's
+ internally. This is a major win (~20 minute run time > ~20
+ seconds) in the common, everday (i.e. testing) case.
+ (get_id): common code used by set_suite() and process_file().
+ (process_file): call set_suite() and get_id().
+ (main): add logging support.
+
+ * julia: new script; syncs PostgeSQL with (LDAP-generated) passwd
+ files.
+
+ * utils.py (parse_changes): use slices or simple string comparison
+ in favour of regexes where possible.
+
+ * sql-aptvc.cpp (versioncmp): rewritten to take into account the
+ fact that the string VARDATA() points to are not null terminated.
+
+ * denise (result_join): new function; like string.join() but
+ handles None's.
+ (list): use it.
+ (main): likewise.
+
+ * charisma (main): python-pygresql 7.1 returns None not "".
+
+2001-09-14 Ryan Murray <rmurray@debian.org>
+
+ * natalie.py (list): handle python-pygresql 7.1 returning None.
+
+2001-09-10 Martin Michlmayr <tbm@cyrius.com>
+
+ * madison (main): return 1 if no package is found.
+
+2001-09-08 Martin Michlmayr <tbm@cyrius.com>
+
+ * madison (main): better error handling for incorrect
+ -a/--architecture or -s/--suite arguments.
+ (usage): new.
+ (main): use it.
+
+2001-09-05 Ryan Murray <rmurray@debian.org>
+
+ * charisma, madison, katie: remove use of ROUser
+ * katie.conf,katie.conf-non-US: remove defintion of ROUser
+
+2001-08-26 James Troup <james@nocrew.org>
+
+ * katie (nmu_p.is_an_nmu): use maintaineremail to check for group
+ maintained packages at cjwatson@'s request.
+
+2001-08-21 James Troup <james@nocrew.org>
+
+ * madison (main): add -a/--architecture support.
+
+ * jenna: use logging instead of being overly verbose on stdout.
+
+2001-08-11 Ryan Murray <rmurray@debian.org>
+
+ * melanie: add functional help option
+
+2001-08-07 Anthony Towns <ajt@debian.org>
+
+ * apt.conf, katie.conf: Add ia64 and hppa to testing.
+
+2001-07-28 James Troup <james@nocrew.org>
+
+ * katie (check_dsc): ensure source version is >> than existing
+ source in target suite.
+
+2001-07-25 James Troup <james@nocrew.org>
+
+ * natalie.py: add logging support.
+
+ * utils.py (open_file): make the second argument optional and
+ default to read-only.
+
+ * rene (main): work around broken source packages that duplicate
+ arch: all packages with arch: !all packages (no longer allowed
+ into the archive by katie).
+
+2001-07-13 James Troup <james@nocrew.org>
+
+ * katie (action): don't assume distribution is a dictionary.
+ (update_subst): don't assume architecture is a dictionary and that
+ maintainer822 is defined.
+ (check_changes): recognise nk_format exceptions.
+ (check_changes): reject on 'testing' only uploads.
+ (check_files): when checking to ensure all packages are newer
+ versions check against arch-all packages too.
+ (check_dsc): enforce the existent of a sane set of mandatory
+ fields. Ensure the version number in the .dsc (modulo epoch)
+ matches the version number in the .changes file.
+
+ * utils.py (changes_compare): ignore all exceptions when parsing
+ the changes files.
+ (build_file_list): don't UNDEF on a changes file with no format
+ field.
+
+2001-07-07 James Troup <james@nocrew.org>
+
+ * katie (nmu_p.is_an_nmu): check 'changedby822' for emptiness
+ rather than 'changedbyname' to avoid false negatives on uploads
+ with an email-address-only Changed-By field.
+ (check_dsc): don't overwrite reject_message; append to it.
+ (check_signature): likewise.
+ (check_changes): likewise.
+ (announce): condition logging on 'action'.
+
+ * logging.py: new logging module.
+
+ * katie: Cleaned up code by putting Cnf["Dinstall::Options"]
+ sub-tree into a separate (global) variable.
+ (check_dsc): ensure format is 1.0 to retain backwards
+ compatability with dpkg-source in potato.
+ (main): only try to obtain the lock when not running in no-action
+ mode.
+ Use the new logging module.
+
+ * christina: initial version; only partially usable.
+
+2001-06-28 Anthony Towns <ajt@debian.org>
+
+ * apt.conf: Add ExtraOverrides to auric.
+
+2001-06-25 James Troup <james@nocrew.org>
+
+ * katie (nmu_p.is_an_nmu): the wonderful dpkg developers decided
+ they preferred the name 'Uploaders'.
+
+2001-06-23 James Troup <james@nocrew.org>
+
+ * katie (check_files): fix typo in uncommon rejection message,
+ s/sourceversion/source version/.
+
+ * denise (main): we can't use print because stdout has been
+ redirected.
+
+ * katie (source_exists): new function; moved out of check_files()
+ and added support for binary-only NMUs of earlier sourceful NMUs.
+
+ * rhona (clean): find_next_free has moved.
+
+ * utils.py (find_next_free): new function; moved here from rhona.
+ Change too_many to be an argument with a default value, rather
+ than a hardcoded variable.
+
+ * shania: rewritten to work better; REJECTion reminder mail
+ handling got lost though.
+
+2001-06-22 James Troup <james@nocrew.org>
+
+ * rhona (main): remove unused override code.
+
+ * fernanda (main): remove extraneous \n's from utils.warn calls.
+ * natalie.py (list): likewise.
+
+ * catherine, cindy, denise, heidi, jenna, katie, neve, rhona, tea:
+ use utils.{warn,fubar} where appropriate.
+
+2001-06-21 James Troup <james@nocrew.org>
+
+ * katie (nmu_p): new class that encapsulates the "is a nmu?"
+ functionality.
+ (nmu_p.is_an_nmu): add support for multiple maintainers specified
+ by the "Maintainers" field in the .dsc file and maintainer groups.
+ (nmu_p.__init__): read in the list of group maintainer names.
+ (announce): use nmu_p.
+
+2001-06-20 James Troup <james@nocrew.org>
+
+ * rene (main): hardcode the suite experimental is compared to by
+ name rather than number.
+
+ * katie (check_files): differentiate between doesn't-exist and
+ permission-denied in "can not read" rejections; requested by edd@.
+ (check_dsc): use os.path.exists rather than os.access to allow the
+ above check to kick in.
+
+ * heidi (process_file): read all input before doing anything and
+ use transactions.
+
+2001-06-15 James Troup <james@nocrew.org>
+
+ * fernanda: new script; replaces old 'check' shell script
+ nastiness.
+
+2001-06-14 James Troup <james@nocrew.org>
+
+ * katie: actually import traceback module to avoid amusing
+ infinite loop.
+
+2001-06-10 James Troup <james@nocrew.org>
+
+ * utils.py (extract_component_from_section): fix to handle just
+ 'non-free' and 'contrib'. Also fix to handle non-US in a
+ completely case insensitive manner as a component.
+
+2001-06-08 James Troup <james@nocrew.org>
+
+ * madison (arch_compare): sort function that sorts 'source' first
+ then alphabetically.
+ (main): use it.
+
+2001-06-05 Jeff Licquia <jlicquia@progeny.com>
+
+ * catherine (poolize): explicitly make poolized_size a long so it
+ doesn't overflow when poolizing e.g. entire archives.
+
+2001-06-01 James Troup <james@nocrew.org>
+
+ * utils.py (send_mail): throw exceptions rather than exiting.
+
+ * katie (process_it): catch exceptions and ignore them.
+
+2001-06-01 Michael Beattie <mjb@debian.org>
+
+ * added update-mailingliststxt and update-readmenonus to update
+ those files, respectively. modified cron.daily{,-non-US} to
+ use them.
+
+2001-05-31 Anthony Towns <ajt@debian.org>
+
+ * rhona: make StayOfExecution work.
+
+2001-05-31 James Troup <james@nocrew.org>
+
+ * rhona (find_next_free): fixes to not overwrite files but rename
+ them by appending .<n> instead.
+ (clean): use find_next_free and use dated sub-directories in the
+ morgue.
+
+ * utils.py (move): don't overwrite files unless forced to.
+ (copy): likewise.
+
+2001-05-24 James Troup <james@nocrew.org>
+
+ * katie (check_files): determine the source version here instead
+ of during install().
+ (check_files): check for existent source with bin-only NMU
+ support.
+ (main): sort the list of changes so that the source-must-exist
+ check Does The Right Thing(tm).
+
+ * utils.py (changes_compare): new function; sorts a list of
+ changes files by 'have-source', source, version.
+ (cc_fix_changes): helper function.
+ (parse_changes): use compiled regexes.
+ (fix_maintainer): likewise.
+
+ * rene (main): warn about packages in experimental that are
+ superseded by newer versions in unstable.
+
+2001-05-21 James Troup <james@nocrew.org>
+
+ * rene (main): add support for checking for ANAIS (Architecture
+ Not Allowed In Source) packages.
+
+2001-05-17 James Troup <james@nocrew.org>
+
+ * katie (check_changes): initalize `architecture' dictionary in
+ changes global so that if we can't parse the changes file for
+ whatever reason we don't undef later on.
+
+ * utils.py (parse_changes): fix handling of multi-line fields
+ where the first line did have data.
+
+2001-05-05 Anthony Towns <ajt@debian.org>
+
+ * ziyi: Add "NotAutomatic: yes" to experimental Release files.
+ (It should always have been there. Ooopsy.)
+
+2001-05-03 Anthony Towns <ajt@debian.org>
+
+ * jenna: Cleanup packages that move from arch:any to arch:all or
+ vice-versa.
+
+2001-04-24 Anthony Towns <ajt@debian.org>
+
+ * ziyi: add ``SHA1:'' info to Release files. Also hack them up to
+ cope with debian-installer and boot-floppies' md5sum.txt.
+
+2001-04-16 James Troup <james@nocrew.org>
+
+ * katie (check_changes): add missing %s format string argument.
+ (stable_install): temporary work around for morgue location to
+ move installed changes files into.
+ (stable_install): helps if you actually read in the template.
+ (manual_reject): fix for editing of reject messages which was
+ using the wrong variable name.
+
+ * jenna (generate_src_list): typo; s/package/source/; fixes undef crash.
+
+2001-04-13 James Troup <james@nocrew.org>
+
+ * katie (manual_reject): Cc the installer.
+ (reject): don't.
+ (check_changes): remove unused maintainer-determination code.
+ (update_subst): add support for Changed-By when setting the
+ *MAINTAINER* variables.
+
+ * rene (bar): new function to check for packages on architectures
+ when they shouldn't be.
+
+ * natalie.py (main): use fubar() and warn() from utils.
+
+ * utils.py (whoami): new mini-function().
+ * melanie (main): use it.
+ * katie (manual_reject): likewise.
+
+2001-04-03 James Troup <james@nocrew.org>
+
+ * katie (action): ignore exceptions from os.path.getmtime() so we
+ don't crash on non-existent changes files (e.g. when they are
+ moved between the start of the install run in cron.daily and the
+ time we get round to processing them).
+
+ * madison (main): also list source and accept -s/--suite.
+
+ * jenna (generate_src_list): missing \n in error message.
+
+ * katie (update_subst): add sane defaults for when changes is
+ skeletal.
+
+2001-03-29 James Troup <james@nocrew.org>
+
+ * melanie (main): use fubar() and warn() from utils. Remember who
+ the maintainer for the removed packages are and display that info
+ to the user. Readd support for melanie-specific Bcc-ing that got
+ lost in the TemplateSubst transition.
+
+ * utils.py (fubar): new function.
+ (warn): like wise.
+
+ * db_access.py (get_maintainer): as below.
+
+ * charisma (get_maintainer): moved the bulk of this function to
+ db_access so that melanie can use it too.
+
+ * claire.py (find_dislocated_stable): restrict the override join
+ to those entries where the suite is stable; this avoids problems
+ with packages which have moved to new sections (e.g. science)
+ between stable and unstable.
+
+2001-03-24 James Troup <james@nocrew.org>
+
+ * catherine (poolize): new function; not really independent of
+ main() fully, yet.
+ (main): use it.
+
+ * katie (stable_install): __SUITE__ needs to be space prefixed
+ because buildd's check for 'INSTALLED$'.
+
+2001-03-22 James Troup <james@nocrew.org>
+
+ * utils.py (regex_safe): also need to escape '.'; noticed by ajt@.
+
+ * jenna: rewritten; now does deletions on a per-suite level
+ instead of a per-suite-component-architecture-type level. This
+ allows mutli-component packages to be auto-cleaned (and as a
+ bonus, reduces the code size and duplication).
+
+2001-03-22 Anthony Towns <ajt@debian.org>
+
+ * ziyi (main): fix ziyi to overwrite existing Release.gpg files
+ instead of just giving a gpg error.
+
+2001-03-21 James Troup <james@nocrew.org>
+
+ * madison (main): use apt_pkg.VersionCompare to sort versions so
+ that output is correctly sorted for packages like debhlper.
+ Noticed by ajt@.
+
+ * tea (check_source_in_one_dir): actually find problematic source
+ packages.
+
+ * katie (check_dsc): remember the orig.tar.gz's location ID if
+ it's not in a legacy suite.
+ (check_diff): we don't use orig_tar_id.
+ (install): add code to handle sourceful diff-only upload of
+ packages which change components by copying the .orig.tar.gz into
+ the new component, if it doesn't already exist there.
+ (process_it): reset orig_tar_location (as above).
+
+ * melanie (main): use template substiution for the bug closing
+ emails.
+ (main): don't hardcode bugs.debian.org or packages.debian.org
+ either; use configuration items.
+
+ * katie: likewise.
+
+ * natalie.py (init): use None rather than 'localhost' for the
+ hostname given to pg.connect.
+
+ * utils.py (TemplateSubst): new function; lifted from
+ userdir-ldap.
+
+2001-03-21 Ryan Murray <rmurray@debian.org>
+
+ * katie (announce): fix the case of non-existent
+ Suite::$SUITE::Announce.
+
+2001-03-20 Ryan Murray <rmurray@debian.org>
+
+ * debian/rules (binary-indep): install melanie into /usr/bin/ not
+ /usr/.
+
+ * alyson (main): use config variable for database name.
+ * andrea (main): likewise.
+ * catherine (main): likewise.
+ * charisma (main): likewise.
+ * cindy (main): likewise.
+ * claire.py (main): likewise.
+ * denise (main): likewise.
+ * heidi (main): likewise.
+ * jenna (main): likewise.
+ * katie (main): likewise.
+ * madison (main): likewise.
+ * melanie (main): likewise.
+ * neve (main): likewise.
+ * rhona (main): likewise.
+ * tea (main): likewise.
+
+2001-03-15 James Troup <james@nocrew.org>
+
+ * rhona (check_sources): fixed evil off by one (letter) error
+ which was causing only .dsc files to be deleted when cleaning
+ source packages.
+
+ * charisma (get_maintainer_from_source): remove really stupid and
+ gratuitous IN sub-query and replace with normal inner join.
+ (main): connect as read-only user nobody.
+
+ * rhona (clean_maintainers): rewritten to use SELECT and sub-query
+ with EXISTS.
+ (check_files): likewise; still disabled by default though.
+ (clean_binaries): add ' seconds' to the mysterious number in the
+ output.
+ (clean): likewise.
+
+ * tea (check_files): add missing global declaration on db_files.
+
+2001-03-14 James Troup <james@nocrew.org>
+
+ * rhona: rewritten large chunks. Removed a lot of the silly
+ selecting into dictionaries and replaced it with 'where exists'
+ based sub queries. Added support for StayOfExecution. Fix the
+ problem with deleting dsc_files too early and disable cleaning of
+ unattached files.
+
+2001-03-14 Anthony Towns <ajt@debian.org>
+
+ * katie (announce): also check Changed-By when trying to detect
+ NMUs.
+
+2001-03-06 Anthony Towns <ajt@debian.org>
+
+ * ziyi (main): Generate Release.gpg files as well, using the key from
+ Dinstall::SigningKey in katie.conf, if present. That key has to be
+ passwordless, and hence kept fairly secretly.
+
+2001-03-02 James Troup <james@nocrew.org>
+
+ * utils.py (str_isnum): new function; checks to see if the string
+ is a number.
+
+ * shania (main): fix _hideous_ bug which was causing all files > 2
+ weeks old to be deleted from incoming, even if they were part of a
+ valid upload.
+
+2001-02-27 James Troup <james@nocrew.org>
+
+ * melanie (main): accept new argument -C/--carbon-copy which
+ allows arbitarty carbon-copying of the bug closure messages.
+ Cleaned up code by putting Cnf["Melanie::Options"] sub-tree into a
+ separate variable.
+
+2001-02-27 Anthony Towns <ajt@debian.org>
+
+ * ziyi: new program; generates Release files.
+
+2001-02-25 James Troup <james@nocrew.org>
+
+ * katie (reject): add missing '\n' to error message.
+ (manual_reject): likewise.
+ (install): catch exceptions from moving the changes file into DONE
+ and ignore them.
+
+ * tea (check_md5sums): new function.
+
+2001-02-25 Michael Beattie <mjb@debian.org>
+
+ * melanie: use $EDITOR if available.
+
+2001-02-15 James Troup <james@nocrew.org>
+
+ * utils.py (parse_changes): don't crash and burn on empty .changes
+ files. Symptoms noticed by mjb@.
+
+2001-02-15 Adam Heath <doogie@debian.org>
+
+ * denise (main): use an absolute path for the output filename.
+
+ * sql-aptvc.cpp: don't #include <utils/builtins.h> as it causes
+ compile errors with postgresql-dev >= 7.0.
+
+2001-02-12 James Troup <james@nocrew.org>
+
+ * rene: initial version.
+
+ * andrea: initial version.
+
+ * catherine (main): remove obsolete assignment of arguments.
+
+2001-02-09 James Troup <james@nocrew.org>
+
+ * catherine: first working version.
+
+2001-02-06 James Troup <james@nocrew.org>
+
+ * katie (check_files): validate the priority field; i.e. ensure it
+ doesn't contain a '/' (to catch people prepending the priority
+ with the component rather than the section).
+ (check_override): don't warn about source packages; the only check
+ is on section and we have no GUI tools that would use the Section
+ field for a Sources file.
+ (announce): use tags rather than severities for NMUs. Requested
+ by Josip Rodin <joy@>. [#78035]
+
+2001-02-04 James Troup <james@nocrew.org>
+
+ * tea (check_override): new function; ensures packages in suites
+ are also in the override file. Thanks to bod@ for noticing that
+ such packages existed.
+
+ * katie: move file type compiled regular expressions to utils as
+ catherine uses them too.
+ (check_changes): always default maintainer822 to the installer
+ address so that any bail out won't cause undefs later.
+ (check_files): update file type re's to match above.
+ (stable_install): likewise.
+ (reject): handle any except from moving the changes files. Fixes
+ crashes on unreadable changes files.
+
+ * melanie (main): add an explanation of why things are not removed
+ from testing.
+
+2001-01-31 James Troup <james@nocrew.org>
+
+ * melanie (main): ignore a) no message, b) removing from stable or
+ testing when invoked with -n/--no-action.
+
+ * katie (check_override): lower section before checking to see if
+ we're whining about 'non-US' versus 'non-US/main'.
+
+ * sql-aptvc.cpp: new file; wrapper around apt's version comparison
+ function so that we can use inside of PostgreSQL.
+
+2001-01-28 James Troup <james@nocrew.org>
+
+ * katie: updated to pass new flag to parse_changes() and deal with
+ the exception raised on invalid .dsc's if appropriate.
+ * shania (main): likewise.
+ * melanie (main): likewise.
+
+ * tea (check_dscs): new function to validate all .dsc files in
+ unstable.
+
+ * utils.py (parse_changes): if passed an additional flag, validate
+ the .dsc file to ensure it's extractable by dpkg-source.
+ Requested by Ben Collins <bcollins@>.
+
+2001-01-27 James Troup <james@nocrew.org>
+
+ * madison (main): connect to the DB as nobody.
+
+ * katie (check_files): remove support for -r/--no-version-check
+ since it makes no sense under katie (jenna will automatically
+ remove the (new) older version) and was evil in any event.
+ (check_changes): add missing new line to rejection message.
+ (check_dsc): likewise.
+ (process_it): reset reject_message here.
+ (main): not here. Also remove support for -r.
+
+2001-01-26 James Troup <james@nocrew.org>
+
+ * katie (check_override): don't whine about 'non-US/main' versus
+ 'non-US'.
+
+2001-01-26 Michael Beattie <mjb@debian.org>
+
+ * natalie.py (usage): new function.
+ (main): use it.
+
+2001-01-25 Antti-Juhani Kaijanaho <gaia@iki.fi>
+
+ * update-mirrorlists: Update README.non-US too (request from Joy).
+
+2001-01-25 James Troup <james@nocrew.org>
+
+ * katie (reject): catch any exception from utils.move() and just
+ pass, we previously only caught can't-overwrite errors and not
+ can't-read ones.
+
+ * jenna (generate_src_list): use ORDER BY in selects to avoid
+ unnecessary changes to Packages files.
+ (generate_bin_list): likewise.
+
+ * utils.py (extract_component_from_section): separated out from
+ build_file_list() as it's now used by claire too.
+
+ * claire.py (find_dislocated_stable): rewrite the query to extract
+ section information and handle component-less locations properly.
+ Thanks to ajt@ for the improved queries.
+ (fix_component_section): new function to fix components and
+ sections.
+
+2001-01-23 James Troup <james@nocrew.org>
+
+ * katie (check_files): set file type for (u?)debs first thing, so
+ that if we continue, other functions which rely on file type
+ existing don't bomb out. If apt_pkg or apt_inst raise an
+ exception when parsing the control file, don't try any other
+ checks, just drop out.
+ (check_changes): new test to ensure there is actually a target
+ distribution.
+
+2001-01-22 James Troup <james@nocrew.org>
+
+ * katie (usage): s/dry-run/no-action/. Noticed by Peter Gervai
+ <grin@>.
+ (check_changes): when mapping to unstable, remember to actually
+ add unstable to the suite list and not just remove the invalid
+ suite.
+
+2001-01-21 James Troup <james@nocrew.org>
+
+ * katie (check_files): catch exceptions from debExtractControl()
+ and reject packages which raise any.
+
+2001-01-19 James Troup <james@nocrew.org>
+
+ * katie (check_signature): basename() file name in rejection
+ message.
+
+2001-01-18 James Troup <james@nocrew.org>
+
+ * katie (in_override_p): remember the section and priority from
+ the override file so we can check them against the package later.
+ (check_override): new function; checks section and priority (for
+ binaries) from the package against the override file and mails the
+ maintainer about any disparities.
+ (install): call check_override after announcing the upload.
+
+2001-01-16 James Troup <james@nocrew.org>
+
+ * utils.py (build_file_list): catch ValueError's from splitting up
+ the files field and translate it into a parse error.
+
+ * tea: add support for finding unreferenced files.
+
+ * katie (in_override_p): add support for suite-aliasing so that
+ proposed-updates uploads work again.
+ (check_changes): catch parses errors from utils.build_file_list().
+ (check_dsc): likewise.
+ (check_diff): yet more dpkg breakage so we require even newer a
+ version.
+
+ * jenna (generate_bin_list): don't do nasty path munging that's no
+ longer needed.
+
+ * denise (main): support for non-US; and rename testing's override
+ files so they're based on testing's codename.
+
+2001-01-16 Martin Michlmayr <tbm@cyrius.com>
+
+ * melanie: add to the bug closing message explaining what happens
+ (or rather doesn't) with bugs against packages that have been
+ removed.
+
+2001-01-14 James Troup <james@nocrew.org>
+
+ * charisma (main): fix silly off-by-one error; suite priority
+ checking was done using "less than" rather than "less than or
+ equal to" which was causing weird hesienbugs with wrong Maintainer
+ fields.
+
+2001-01-10 James Troup <james@nocrew.org>
+
+ * katie (in_override_p): adapted to use SQL-based overrides.
+ read_override_file function disappears.
+
+ * db_access.py: add new functions get_section_id, get_priority_id
+ and get_override_type_id.
+ (get_architecture_id): return -1 if the architecture is not found.
+
+ * heidi: switch %d -> %d in all SQL queries.
+ (get_list): Use string.join where appropriate.
+
+ * rhona (in_override_p): don't die if the override file doesn't
+ exist.
+ (main): warn if the override file doesn't exist.
+
+ * alyson: new script; will eventually sync the config file and the
+ SQL database.
+
+ * natalie.py: new script; manipulates overrides.
+
+ * melanie: new script; removes packages from suites.
+
+2001-01-08 James Troup <james@nocrew.org>
+
+ * katie (re_bad_diff): whee; dpkg 1.8.1.1 didn't actually fix
+ anything it just changed the symptom. Recognise the new breakage
+ and reject them too.
+
+2001-01-07 James Troup <james@nocrew.org>
+
+ * katie (check_dsc): when adding the cwd copy of the .orig.tar.gz
+ to the .changes file, be sure to set up files[filename]["type"]
+ too.
+
+2001-01-06 James Troup <james@nocrew.org>
+
+ * katie (check_diff): new function; detects bad diff files
+ produced by dpkg 1.8.1 and rejects thems.
+ (process_it): call check_diff().
+ (check_dsc): gar. Add support for multiple versions of the
+ .orig.tar.gz file in the archive from -sa uploads. Check md5sum
+ and size against all versions and use one which matches if
+ possible and exclude any that don't from being poolized to avoid
+ file overwrites. Thanks to broonie@ for providing the example.
+ (install): skip any files marked as excluded as above.
+
+2001-01-05 James Troup <james@nocrew.org>
+
+ * heidi (process_file): add missing argument to error message.
+
+2001-01-04 James Troup <james@nocrew.org>
+
+ * heidi (main): fix handling of multiple files by reading all
+ files not just the first file n times (where n = the number of
+ files passed as arguments).
+
+2001-01-04 Anthony Towns <ajt@debian.org>
+
+ * katie (check_dsc): proper fix for the code which locates the
+ .orig.tar.gz; check for '<filename>$' or '^<filename>$'.
+
+2000-12-20 James Troup <james@nocrew.org>
+
+ * rhona: replace IN's with EXISTS's to make DELETE time for
+ binaries and source sane on auric. Add a -n/--no-action flag and
+ make it stop actions if used. Fixed a bug in binaries deletion
+ with no StayOfExecution (s/</<=/). Add working -h/--help and
+ -V/--version. Giving timing info on deletion till I'm sure it's
+ sane.
+
+ * katie (check_changes): map testing to unstable.
+
+ * madison: new script; shows versions in different architectures.
+
+ * katie (check_dsc): ensure size matches as well as md5sum;
+ suggested by Ben Collins <bcollins@debian.org> in Debian Bug
+ #69702.
+
+2000-12-19 James Troup <james@nocrew.org>
+
+ * katie (reject): ignore the "can't overwrite file" exception from
+ utils.move() and leave the files where they are.
+ (reject): doh! os.access() test was reversed so we only tried to
+ move files which didn't exist... replaced with os.path.exists()
+ test the right way round.
+
+ * utils.py (move): raise an exception if we can't overwrite the
+ destination file.
+ (copy): likewise.
+
+2000-12-18 James Troup <james@nocrew.org>
+
+ * rhona: first working version.
+
+ * db_access.py (get_files_id): force both sizes to be integers.
+
+ * katie (main): use size_type().
+
+ * utils.py (size_type): new function; pretty prints a file size.
+
+2000-12-17 James Troup <james@nocrew.org>
+
+ * charisma (main): do version compares so that older packages do
+ not override newer ones and process source first as source wins
+ over binaries in terms of who we think of as the Maintainer.
+
+2000-12-15 James Troup <james@nocrew.org>
+
+ * katie (install): use the files id for the .orig.tar.gz from
+ check_dsc().
+ (install): limit select for legacy source to a) source in legacy
+ or legacy-mixed type locations and b) distinct on files.id.
+ (install): rather than the bizarre insert new, delete old method
+ for moving legacy source into the pool, use a simple update of
+ files.
+ (process_it): initalize some globals before each process.
+
+2000-12-14 James Troup <james@nocrew.org>
+
+ * katie (in_override_p): index on binary_type too since .udeb
+ overrides are in a different file.
+ (read_override_file): likewise.
+ (check_files): correct filename passed to get_files_id().
+ (check_dsc): we _have_ to preprend '/' to the filename to avoid
+ mismatches like jabber.orig.tar.gz versus libjabber.orig.tar.gz.
+ (check_dsc): remember the files id of the .orig.tar.gz, not the
+ location id.
+
+2000-12-13 James Troup <james@nocrew.org>
+
+ * utils.py (poolify): force the component to lower case except for
+ non-US.
+
+ * katie (in_override_p): handle .udeb-specific override files.
+ (check_files): pass the binary type to in_override_p().
+ (check_dsc): remember the location id of the old .orig.tar.gz in
+ case it's not in the pool.
+ (install): use location id from dsc_files; which is where
+ check_dsc() puts it for old .orig.tar.gz files.
+ (install): install files after all DB work is complete.
+ (reject): basename() the changes filename.
+ (manual_reject): likewise.
+
+ * shania: new progam; replaces incomingcleaner.
+
+2000-12-05 James Troup <james@nocrew.org>
+
+ * katie (check_changes): if inside stable and can't find files
+ from the .changes; assume it's installed in the pool and chdir()
+ to there.
+ (check_files): we are not installing for stable installs, so don't
+ check for overwriting existing files.
+ (check_dsc): likewise.
+ (check_dsc): reorder .orig.tar.gz handling so that we search in
+ the pool first and only then fall back on any .orig.tar.gz in the
+ cwd; this avoids false positives on the overwrite check when
+ people needlessly reupoad the .orig.tar.gz in a non-sa upload.
+ (install): if this is a stable install, bail out to
+ stable_install() immediately.
+ (install): dsc_files handling was horribly broken. a) we need to
+ add files from the .dsc and not the .changes (duh), b) we need to
+ add the .dsc file itself to dsc_files (to be consistent with neve
+ if for no other reason).
+ (stable_install): new function; handles installs from inside
+ proposed-updates to stable.
+ (acknowledge_new): basename changes_filename before doing
+ anything.
+ (process_it): absolutize the changes filename to avoid the
+ requirement of being in the same directory as the .changes file.
+ (process_it): save and restore the cwd as stable installs can
+ potentially jump into the pool to find files.
+
+ * jenna: dislocated_files support using claire.
+
+ * heidi (process_file): select package field from binaries
+ explicitly.
+
+ * db_access.py (get_files_id): fix cache key used.
+
+ * utils.py (build_file_list): fix 'non-US/non-free' case in
+ section/component splitting.
+ (move): use os.path.isdir() rather than stat.
+ (copy): likewise.
+
+ * claire.py: new file; stable in non-stable munger.
+
+ * tea: new file; simply ensures all files in the DB exist.
+
+2000-12-01 James Troup <james@nocrew.org>
+
+ * katie (check_dsc): use regex_safe().
+ (check_changes): typo in changes{} key:
+ s/distributions/distribution/.
+ (install): use changes["source"], not files[file]["source"] as the
+ latter may not exist and the former is used elsewhere. Commit the
+ SQL transaction earlier.
+
+ * utils.py (regex_safe): new function; escapes characters which
+ have meaning to SQL's regex comparison operator ('~').
+
+2000-11-30 James Troup <james@nocrew.org>
+
+ * katie (install): pool_location is based on source package name,
+ not binary package.
+
+ * utils.py (move): if dest is a directory, append the filename
+ before chmod-ing.
+ (copy): ditto.
+
+ * katie (check_files): don't allow overwriting of existing .debs.
+ (check_dsc): don't allow overwriting of existing source files.
+
+2000-11-27 James Troup <james@nocrew.org>
+
+ * katie (check_signature): don't try to load rsaref; it's
+ obsolete.
+ (in_override_p): don't try to lookup override entries for packages
+ with an invalid suite name.
+ (announce): don't assume the suite name is valid; use Find() to
+ lookup the mailing list name for announcements.
+
+ * utils.py (where_am_i): typo; hostname is in the first element,
+ not second.
+
+ * db_access.py (get_suite_id): return -1 on an unknown suite.
+
+2000-11-26 James Troup <james@nocrew.org>
+
+ * katie (install): fix CopyChanges handling; typo in in checking
+ Cnf for CopyChanges flag and was calling non-existent function
+ copy_file.
+
+ * utils.py (copy): new function; clone of move without the
+ unlink().
+
+2000-11-25 James Troup <james@nocrew.org>
+
+ * utils.py (build_file_list): handle non-US prefixes properly
+ (i.e. 'non-US' -> 'non-US/main' and 'non-US/libs' -> 'non-US/main'
+ + 'libs' not 'non-US/libs').
+ (send_mail): add '-odq' to sendmail invocation to avoid DNS lookup
+ delays. This is possibly(/probably) exim speicifc and (like other
+ sendmail options) needs to be in the config file.
+
+2000-11-24 James Troup <james@nocrew.org>
+
+ * rhona (check_sources): we need file id from dsc_files; not id.
+ Handle non .dsc source files being re-referenced in dsc_files.
+
+ * katie (in_override_p): strip out any 'non-US' prefix.
+ (check_files): use utils.where_am_i() rather than hardcoding.
+ (check_files): validate the component.
+ (install): use utils.where_am_i() rather than hardcoding.
+ (install): fix mail to go to actual recepient.
+ (reject): likewise.
+ (manual_reject): likewise.
+ (acknowledge_new): likewise.
+ (announce): likewise.
+
+ * db_access.py (get_component_id): ignore case when searching for
+ the component and don't crash if the component can't be found, but
+ return -1.
+ (get_location_id): handle -1 from get_component_id().
+
+ * jenna (generate_src_list): don't bring 'suite' into our big
+ multi-table-joining select as we already know the 'suite_id'.
+ (generate_bin_list): likewise.
+
+ * neve (main): don't quit if not on ftp-master.
+ (process_packages): remove unused variable 'suite_codename'.
+
+ * utils.py (move): actually move the file.
+ (build_file_list): handle non-US prefixes in the section.
+
+ * catherine (main): use which_conf_file().
+ * charisma (main): likewise.
+ * heidi (main): likewise.
+ * jenna (main): likewise.
+ * katie (main): likewise.
+ * neve (main): likewise.
+ * rhona (main): likewise.
+
+ * utils.py (where_am_i): new routine; determines the archive as
+ understood by other 'dak' programs.
+ (which_conf_file): new routine; determines the conf file to read.
+
+2000-11-17 James Troup <james@nocrew.org>
+
+ * katie (install): fix where .changes files for proposed-updates
+ go.
+
+2000-11-04 James Troup <james@nocrew.org>
+
+ * jenna (main): handle architecture properly if no
+ -a/--architecture argument is given, i.e. reset architecture with
+ the values for the suite for each suite.
+
+ * Add apt_pkg.init() to the start of all scripts as it's now
+ required by python-apt.
+
+2000-10-29 James Troup <james@nocrew.org>
+
+ * jenna (generate_bin_list): take an additional argument 'type'
+ and use it in the SELECT.
+ (main): if processing component 'main', process udebs and debs.
+
+ * neve (process_packages): set up 'type' in 'binaries' (by
+ assuming .deb).
+
+ * katie (re_isadeb): accept ".udeb" or ".deb" as a file ending.
+ (check_files): set up files[file]["dbtype"].
+ (install): use files[file]["dbtype"] to set up the 'type' field in
+ the 'binaries' table.
+
+ * init_pool.sql: add a 'type' field to the 'binaries' table to
+ distinguisgh between ".udeb" and ".deb" files.
+
+ * utils.py (move): scrap basename() usage; use a "dir_p(dest) :
+ dest ? dirname(dest)" type check instead.
+
+ * katie (check_dsc): handle the case of an .orig.tar.gz not found
+ in the pool without crashing. Also handle the case of being asked
+ to look for something other than an .orig.tar.gz in the pool.
+
+2000-10-26 James Troup <james@nocrew.org>
+
+ * katie (install): fix filenames put into files table during
+ poolification of legacy source.
+
+ * utils.py (move): work around a bug in os.path.basename() which
+ cunningly returns '' if there is a trailing slash on the path
+ passed to it.
+
+ * katie (check_dsc): Remove more cruft. If we find the
+ .orig.tar.gz in the pool and it's in a legacy (or legacy-mixed)
+ location, make a note of that so we can fix things in install().
+ (install): as above. Move any old source out of legacy locations
+ so that 'apt-get source' will work.
+ (process_it): reset the flag that indicates to install that the
+ source needs moved.
+
+ * cron.daily: more. Nowhere near complete yet though.
+
+ * katie (install): don't run os.makedirs, a) utils.move() does
+ this now, b) we weren't removing the user's umask and were
+ creating dirs with SNAFU permissions.
+ (check_dsc): rewrite the .orig.tar.gz handling to take into
+ account, err, package pools. i.e. look anywhere in the pool
+ rather than faffing around with two simple paths.
+
+ * neve (process_sources): add the .dsc to dsc_files too.
+
+2000-10-25 James Troup <james@nocrew.org>
+
+ * neve (process_sources): don't duplicate .orig.tar.gz's.
+
+2000-10-23 James Troup <james@nocrew.org>
+
+ * utils.py (re_extract_src_version): moved here.
+
+ * neve: move re_extract_src_version to utils.
+ (process_packages): reflect change.
+
+ * katie (install): reflect change.
+
+2000-10-19 James Troup <james@nocrew.org>
+
+ * jenna (generate_src_list): handle locations with null
+ components.
+ (generate_bin_list): likewise.
+
projects / dak / commitdiff