]> err.no Git - linux-2.6/commitdiff
IB/mthca: restore missing PCI registers after reset
authorMichael S. Tsirkin <mst@mellanox.co.il>
Mon, 12 Jun 2006 13:57:51 +0000 (16:57 +0300)
committerRoland Dreier <rolandd@cisco.com>
Sun, 18 Jun 2006 03:37:00 +0000 (20:37 -0700)
mthca does not restore the following PCI-X/PCI Express registers after reset:
  PCI-X device: PCI-X command register
  PCI-X bridge: upstream and downstream split transaction registers
  PCI Express : PCI Express device control and link control registers

This causes instability and/or bad performance on systems where one of
these registers is set to a non-default value by BIOS.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
drivers/infiniband/hw/mthca/mthca_reset.c

index df5e494a9d3887ca9b71c9cd8721c7ffdaea0d54..f4fddd5327f534039bd0de8b6e0c5cce91ea4c3d 100644 (file)
@@ -49,6 +49,12 @@ int mthca_reset(struct mthca_dev *mdev)
        u32 *hca_header    = NULL;
        u32 *bridge_header = NULL;
        struct pci_dev *bridge = NULL;
+       int bridge_pcix_cap = 0;
+       int hca_pcie_cap = 0;
+       int hca_pcix_cap = 0;
+
+       u16 devctl;
+       u16 linkctl;
 
 #define MTHCA_RESET_OFFSET 0xf0010
 #define MTHCA_RESET_VALUE  swab32(1)
@@ -110,6 +116,9 @@ int mthca_reset(struct mthca_dev *mdev)
                }
        }
 
+       hca_pcix_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX);
+       hca_pcie_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP);
+
        if (bridge) {
                bridge_header = kmalloc(256, GFP_KERNEL);
                if (!bridge_header) {
@@ -129,6 +138,13 @@ int mthca_reset(struct mthca_dev *mdev)
                                goto out;
                        }
                }
+               bridge_pcix_cap = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+               if (!bridge_pcix_cap) {
+                               err = -ENODEV;
+                               mthca_err(mdev, "Couldn't locate HCA bridge "
+                                         "PCI-X capability, aborting.\n");
+                               goto out;
+               }
        }
 
        /* actually hit reset */
@@ -178,6 +194,20 @@ int mthca_reset(struct mthca_dev *mdev)
 good:
        /* Now restore the PCI headers */
        if (bridge) {
+               if (pci_write_config_dword(bridge, bridge_pcix_cap + 0x8,
+                                bridge_header[(bridge_pcix_cap + 0x8) / 4])) {
+                       err = -ENODEV;
+                       mthca_err(mdev, "Couldn't restore HCA bridge Upstream "
+                                 "split transaction control, aborting.\n");
+                       goto out;
+               }
+               if (pci_write_config_dword(bridge, bridge_pcix_cap + 0xc,
+                                bridge_header[(bridge_pcix_cap + 0xc) / 4])) {
+                       err = -ENODEV;
+                       mthca_err(mdev, "Couldn't restore HCA bridge Downstream "
+                                 "split transaction control, aborting.\n");
+                       goto out;
+               }
                /*
                 * Bridge control register is at 0x3e, so we'll
                 * naturally restore it last in this loop.
@@ -203,6 +233,35 @@ good:
                }
        }
 
+       if (hca_pcix_cap) {
+               if (pci_write_config_dword(mdev->pdev, hca_pcix_cap,
+                                hca_header[hca_pcix_cap / 4])) {
+                       err = -ENODEV;
+                       mthca_err(mdev, "Couldn't restore HCA PCI-X "
+                                 "command register, aborting.\n");
+                       goto out;
+               }
+       }
+
+       if (hca_pcie_cap) {
+               devctl = hca_header[(hca_pcie_cap + PCI_EXP_DEVCTL) / 4];
+               if (pci_write_config_word(mdev->pdev, hca_pcie_cap + PCI_EXP_DEVCTL,
+                                          devctl)) {
+                       err = -ENODEV;
+                       mthca_err(mdev, "Couldn't restore HCA PCI Express "
+                                 "Device Control register, aborting.\n");
+                       goto out;
+               }
+               linkctl = hca_header[(hca_pcie_cap + PCI_EXP_LNKCTL) / 4];
+               if (pci_write_config_word(mdev->pdev, hca_pcie_cap + PCI_EXP_LNKCTL,
+                                          linkctl)) {
+                       err = -ENODEV;
+                       mthca_err(mdev, "Couldn't restore HCA PCI Express "
+                                 "Link control register, aborting.\n");
+                       goto out;
+               }
+       }
+
        for (i = 0; i < 16; ++i) {
                if (i * 4 == PCI_COMMAND)
                        continue;