/*****************************************************************************
*
* Filename: irda-usb.c
- * Version: 0.9b
+ * Version: 0.10
* Description: IrDA-USB Driver
* Status: Experimental
* Author: Dag Brattli <dag@brattli.net>
* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
* Copyright (C) 2001, Dag Brattli <dag@brattli.net>
* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (C) 2004, SigmaTel, Inc. <irquality@sigmatel.com>
+ * Copyright (C) 2005, Milan Beno <beno@pobox.sk>
+ * Copyright (C) 2006, Nick Fedchik <nick@fedchik.org.ua>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/usb.h>
+#include <linux/firmware.h>
#include "irda-usb.h"
{ USB_DEVICE(0x50f, 0x180), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
/* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
{ USB_DEVICE(0x8e9, 0x100), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* SigmaTel STIR4210/4220/4116 USB IrDA (VFIR) Bridge */
+ { USB_DEVICE(0x66f, 0x4210), .driver_info = IUC_STIR_4210 | IUC_SPEED_BUG },
+ { USB_DEVICE(0x66f, 0x4220), .driver_info = IUC_STIR_4210 | IUC_SPEED_BUG },
+ { USB_DEVICE(0x66f, 0x4116), .driver_info = IUC_STIR_4210 | IUC_SPEED_BUG },
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
- USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
.bInterfaceClass = USB_CLASS_APP_SPEC,
.bInterfaceSubClass = USB_CLASS_IRDA,
.driver_info = IUC_DEFAULT, },
/*------------------------------------------------------------------*/
+static void irda_usb_init_qos(struct irda_usb_cb *self) ;
static struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf);
static void irda_usb_disconnect(struct usb_interface *intf);
static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self);
__u8 *header,
int force)
{
- /* Set the negotiated link speed */
+ /* Here we check if we have an STIR421x chip,
+ * and if either speed or xbofs (or both) needs
+ * to be changed.
+ */
+ if (self->capability & IUC_STIR_4210 &&
+ ((self->new_speed != -1) || (self->new_xbofs != -1))) {
+
+ /* With STIR421x, speed and xBOFs must be set at the same
+ * time, even if only one of them changes.
+ */
+ if (self->new_speed == -1)
+ self->new_speed = self->speed ;
+
+ if (self->new_xbofs == -1)
+ self->new_xbofs = self->xbofs ;
+ }
+
+ /* Set the link speed */
if (self->new_speed != -1) {
/* Hum... Ugly hack :-(
* Some device are not compliant with the spec and change
*header = SPEED_4000000;
self->new_xbofs = 0;
break;
- }
+ case 16000000:
+ *header = SPEED_16000000;
+ self->new_xbofs = 0;
+ break;
+ }
} else
/* No change */
*header = 0;
}
}
+/*
+* calculate turnaround time for SigmaTel header
+*/
+static __u8 get_turnaround_time(struct sk_buff *skb)
+{
+ int turnaround_time = irda_get_mtt(skb);
+
+ if ( turnaround_time == 0 )
+ return 0;
+ else if ( turnaround_time <= 10 )
+ return 1;
+ else if ( turnaround_time <= 50 )
+ return 2;
+ else if ( turnaround_time <= 100 )
+ return 3;
+ else if ( turnaround_time <= 500 )
+ return 4;
+ else if ( turnaround_time <= 1000 )
+ return 5;
+ else if ( turnaround_time <= 5000 )
+ return 6;
+ else
+ return 7;
+}
+
+
/*------------------------------------------------------------------*/
/*
* Send a command to change the speed of the dongle
/* Set the new speed and xbofs in this fake frame */
irda_usb_build_header(self, frame, 1);
+ if ( self->capability & IUC_STIR_4210 ) {
+ if (frame[0] == 0) return ; // do nothing if no change
+ frame[1] = 0; // other parameters don't change here
+ frame[2] = 0;
+ }
+
/* Submit the 0 length IrDA frame to trigger new speed settings */
usb_fill_bulk_urb(urb, self->usbdev,
usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
frame, IRDA_USB_SPEED_MTU,
speed_bulk_callback, self);
- urb->transfer_buffer_length = USB_IRDA_HEADER;
+ urb->transfer_buffer_length = self->header_length;
urb->transfer_flags = 0;
/* Irq disabled -> GFP_ATOMIC */
* allocation will be done lower in skb_push().
* Also, we don't use directly skb_cow(), because it require
* headroom >= 16, which force unnecessary copies - Jean II */
- if (skb_headroom(skb) < USB_IRDA_HEADER) {
+ if (skb_headroom(skb) < self->header_length) {
IRDA_DEBUG(0, "%s(), Insuficient skb headroom.\n", __FUNCTION__);
- if (skb_cow(skb, USB_IRDA_HEADER)) {
+ if (skb_cow(skb, self->header_length)) {
IRDA_WARNING("%s(), failed skb_cow() !!!\n", __FUNCTION__);
goto drop;
}
}
/* Change setting for next frame */
- irda_usb_build_header(self, skb_push(skb, USB_IRDA_HEADER), 0);
+
+ if ( self->capability & IUC_STIR_4210 ) {
+ __u8 turnaround_time;
+ __u8* frame;
+ turnaround_time = get_turnaround_time( skb );
+ frame= skb_push(skb, self->header_length);
+ irda_usb_build_header(self, frame, 0);
+ frame[2] = turnaround_time;
+ if ((skb->len != 0) &&
+ ((skb->len % 128) == 0) &&
+ ((skb->len % 512) != 0)) {
+ /* add extra byte for special SigmaTel feature */
+ frame[1] = 1;
+ skb_put(skb, 1);
+ } else {
+ frame[1] = 0;
+ }
+ } else {
+ irda_usb_build_header(self, skb_push(skb, self->header_length), 0);
+ }
/* FIXME: Make macro out of this one */
((struct irda_skb_cb *)skb->cb)->context = self;
}
/* Check for empty frames */
- if (urb->actual_length <= USB_IRDA_HEADER) {
+ if (urb->actual_length <= self->header_length) {
IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
goto done;
}
docopy = (urb->actual_length < IRDA_RX_COPY_THRESHOLD);
/* Allocate a new skb */
- newskb = dev_alloc_skb(docopy ? urb->actual_length : IRDA_SKB_MAX_MTU);
+ if ( self->capability & IUC_STIR_4210 )
+ newskb = dev_alloc_skb(docopy ? urb->actual_length : IRDA_SKB_MAX_MTU + USB_IRDA_SIGMATEL_HEADER);
+ else
+ newskb = dev_alloc_skb(docopy ? urb->actual_length : IRDA_SKB_MAX_MTU);
+
if (!newskb) {
self->stats.rx_dropped++;
/* We could deliver the current skb, but this would stall
/* Set proper length on skb & remove USB-IrDA header */
skb_put(dataskb, urb->actual_length);
- skb_pull(dataskb, USB_IRDA_HEADER);
+ skb_pull(dataskb, self->header_length);
/* Ask the networking layer to queue the packet for the IrDA stack */
dataskb->dev = self->netdev;
return 0; /* For now */
}
+
+#define STIR421X_PATCH_PRODUCT_VERSION_STR "Product Version: "
+#define STIR421X_PATCH_COMPONENT_VERSION_STR "Component Version: "
+#define STIR421X_PATCH_DATA_TAG_STR "STMP"
+#define STIR421X_PATCH_FILE_VERSION_MAX_OFFSET 512 /* version info is before here */
+#define STIR421X_PATCH_FILE_IMAGE_MAX_OFFSET 512 /* patch image starts before here */
+#define STIR421X_PATCH_FILE_END_OF_HEADER_TAG 0x1A /* marks end of patch file header (PC DOS text file EOF character) */
+
+/*
+ * Known firmware patches for STIR421x dongles
+ */
+static char * stir421x_patches[] = {
+ "42101001.sb",
+ "42101002.sb",
+};
+
+static int stir421x_get_patch_version(unsigned char * patch, const unsigned long patch_len)
+{
+ unsigned int version_offset;
+ unsigned long version_major, version_minor, version_build;
+ unsigned char * version_start;
+ int version_found = 0;
+
+ for (version_offset = 0;
+ version_offset < STIR421X_PATCH_FILE_END_OF_HEADER_TAG;
+ version_offset++) {
+ if (!memcmp(patch + version_offset,
+ STIR421X_PATCH_PRODUCT_VERSION_STR,
+ sizeof(STIR421X_PATCH_PRODUCT_VERSION_STR) - 1)) {
+ version_found = 1;
+ version_start = patch +
+ version_offset +
+ sizeof(STIR421X_PATCH_PRODUCT_VERSION_STR) - 1;
+ break;
+ }
+ }
+
+ /* We couldn't find a product version on this patch */
+ if (!version_found)
+ return -EINVAL;
+
+ /* Let's check if the product version is dotted */
+ if (version_start[3] != '.' ||
+ version_start[7] != '.')
+ return -EINVAL;
+
+ version_major = simple_strtoul(version_start, NULL, 10);
+ version_minor = simple_strtoul(version_start + 4, NULL, 10);
+ version_build = simple_strtoul(version_start + 8, NULL, 10);
+
+ IRDA_DEBUG(2, "%s(), Major: %ld Minor: %ld Build: %ld\n",
+ __FUNCTION__,
+ version_major, version_minor, version_build);
+
+ return (((version_major) << 12) +
+ ((version_minor) << 8) +
+ ((version_build / 10) << 4) +
+ (version_build % 10));
+
+}
+
+
+static int stir421x_upload_patch (struct irda_usb_cb *self,
+ unsigned char * patch,
+ const unsigned int patch_len)
+{
+ int retval = 0;
+ int actual_len;
+ unsigned int i = 0, download_amount = 0;
+ unsigned char * patch_chunk;
+
+ IRDA_DEBUG (2, "%s(), Uploading STIR421x Patch\n", __FUNCTION__);
+
+ patch_chunk = kzalloc(STIR421X_MAX_PATCH_DOWNLOAD_SIZE, GFP_KERNEL);
+ if (patch_chunk == NULL)
+ return -ENOMEM;
+
+ /* break up patch into 1023-byte sections */
+ for (i = 0; retval >= 0 && i < patch_len; i += download_amount) {
+ download_amount = patch_len - i;
+ if (download_amount > STIR421X_MAX_PATCH_DOWNLOAD_SIZE)
+ download_amount = STIR421X_MAX_PATCH_DOWNLOAD_SIZE;
+
+ /* download the patch section */
+ memcpy(patch_chunk, patch + i, download_amount);
+
+ retval = usb_bulk_msg (self->usbdev,
+ usb_sndbulkpipe (self->usbdev,
+ self->bulk_out_ep),
+ patch_chunk, download_amount,
+ &actual_len, msecs_to_jiffies (500));
+ IRDA_DEBUG (2, "%s(), Sent %u bytes\n", __FUNCTION__,
+ actual_len);
+ if (retval == 0)
+ mdelay(10);
+ }
+
+ kfree(patch_chunk);
+
+ if (i != patch_len) {
+ IRDA_ERROR ("%s(), Pushed %d bytes (!= patch_len (%d))\n",
+ __FUNCTION__, i, patch_len);
+ retval = -EIO;
+ }
+
+ if (retval < 0)
+ /* todo - mark device as not ready */
+ IRDA_ERROR ("%s(), STIR421x patch upload failed (%d)\n",
+ __FUNCTION__, retval);
+
+ return retval;
+}
+
+
+static int stir421x_patch_device(struct irda_usb_cb *self)
+{
+ unsigned int i, patch_found = 0, data_found = 0, data_offset;
+ int patch_version, ret = 0;
+ const struct firmware *fw_entry;
+
+ for (i = 0; i < ARRAY_SIZE(stir421x_patches); i++) {
+ if(request_firmware(&fw_entry, stir421x_patches[i], &self->usbdev->dev) != 0) {
+ IRDA_ERROR( "%s(), Patch %s is not available\n", __FUNCTION__, stir421x_patches[i]);
+ continue;
+ }
+
+ /* We found a patch from userspace */
+ patch_version = stir421x_get_patch_version (fw_entry->data, fw_entry->size);
+
+ if (patch_version < 0) {
+ /* Couldn't fetch a version, let's move on to the next file */
+ IRDA_ERROR("%s(), version parsing failed\n", __FUNCTION__);
+ ret = patch_version;
+ release_firmware(fw_entry);
+ continue;
+ }
+
+ if (patch_version != self->usbdev->descriptor.bcdDevice) {
+ /* Patch version and device don't match */
+ IRDA_ERROR ("%s(), wrong patch version (%d <-> %d)\n",
+ __FUNCTION__,
+ patch_version, self->usbdev->descriptor.bcdDevice);
+ ret = -EINVAL;
+ release_firmware(fw_entry);
+ continue;
+ }
+
+ /* If we're here, we've found a correct patch */
+ patch_found = 1;
+ break;
+
+ }
+
+ /* We couldn't find a valid firmware, let's leave */
+ if (!patch_found)
+ return ret;
+
+ /* The actual image starts after the "STMP" keyword */
+ for (data_offset = 0; data_offset < STIR421X_PATCH_FILE_IMAGE_MAX_OFFSET; data_offset++) {
+ if (!memcmp(fw_entry->data + data_offset,
+ STIR421X_PATCH_DATA_TAG_STR,
+ sizeof(STIR421X_PATCH_FILE_IMAGE_MAX_OFFSET))) {
+ IRDA_DEBUG(2, "%s(), found patch data for STIR421x at offset %d\n",
+ __FUNCTION__, data_offset);
+ data_found = 1;
+ break;
+ }
+ }
+
+ /* We couldn't find "STMP" from the header */
+ if (!data_found)
+ return -EINVAL;
+
+ /* Let's upload the patch to the target */
+ ret = stir421x_upload_patch(self,
+ &fw_entry->data[data_offset + sizeof(STIR421X_PATCH_FILE_IMAGE_MAX_OFFSET)],
+ fw_entry->size - (data_offset + sizeof(STIR421X_PATCH_FILE_IMAGE_MAX_OFFSET)));
+
+ release_firmware(fw_entry);
+
+ return ret;
+
+}
+
+
/********************** IRDA DEVICE CALLBACKS **********************/
/*
* Main calls from the IrDA/Network subsystem.
return -1;
}
+ if(self->needspatch) {
+ IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ;
+ return -EIO ;
+ }
+
/* Initialise default speed and xbofs value
* (IrLAP will change that soon) */
self->speed = -1;
del_timer(&self->rx_defer_timer);
/* Deallocate all the Rx path buffers (URBs and skb) */
- for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ for (i = 0; i < self->max_rx_urb; i++) {
struct urb *urb = self->rx_urb[i];
struct sk_buff *skb = (struct sk_buff *) urb->context;
/* Cancel the receive command */
spin_lock_init(&self->lock);
init_timer(&self->rx_defer_timer);
+ self->capability = id->driver_info;
+ self->needspatch = ((self->capability & IUC_STIR_4210) != 0) ;
+
/* Create all of the needed urbs */
- for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ if (self->capability & IUC_STIR_4210) {
+ self->max_rx_urb = IU_SIGMATEL_MAX_RX_URBS;
+ self->header_length = USB_IRDA_SIGMATEL_HEADER;
+ } else {
+ self->max_rx_urb = IU_MAX_RX_URBS;
+ self->header_length = USB_IRDA_HEADER;
+ }
+
+ self->rx_urb = kzalloc(self->max_rx_urb * sizeof(struct urb *),
+ GFP_KERNEL);
+
+ for (i = 0; i < self->max_rx_urb; i++) {
self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!self->rx_urb[i]) {
goto err_out_1;
goto err_out_3;
}
+ self->usbdev = dev;
+
/* Find IrDA class descriptor */
irda_desc = irda_usb_find_class_desc(intf);
ret = -ENODEV;
if (irda_desc == NULL)
goto err_out_3;
+ if (self->needspatch) {
+ ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
+ 0x02, 0x40, 0, 0, 0, 0, msecs_to_jiffies(500));
+ if (ret < 0) {
+ IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
+ goto err_out_3;
+ } else {
+ mdelay(10);
+ }
+ }
+
self->irda_desc = irda_desc;
self->present = 1;
self->netopen = 0;
- self->capability = id->driver_info;
- self->usbdev = dev;
self->usbintf = intf;
/* Allocate the buffer for speed changes */
IRDA_MESSAGE("IrDA: Registered device %s\n", net->name);
usb_set_intfdata(intf, self);
+
+ if (self->needspatch) {
+ /* Now we fetch and upload the firmware patch */
+ ret = stir421x_patch_device(self);
+ self->needspatch = (ret < 0);
+ if (ret < 0) {
+ printk("patch_device failed\n");
+ goto err_out_4;
+ }
+
+ /* replace IrDA class descriptor with what patched device is now reporting */
+ irda_desc = irda_usb_find_class_desc (self->usbintf);
+ if (irda_desc == NULL) {
+ ret = -ENODEV;
+ goto err_out_4;
+ }
+ if (self->irda_desc)
+ kfree (self->irda_desc);
+ self->irda_desc = irda_desc;
+ irda_usb_init_qos(self);
+ }
+
return 0;
err_out_4:
err_out_2:
usb_free_urb(self->tx_urb);
err_out_1:
- for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ for (i = 0; i < self->max_rx_urb; i++) {
if (self->rx_urb[i])
usb_free_urb(self->rx_urb[i]);
}
/*netif_device_detach(self->netdev);*/
netif_stop_queue(self->netdev);
/* Stop all the receive URBs. Must be synchronous. */
- for (i = 0; i < IU_MAX_RX_URBS; i++)
+ for (i = 0; i < self->max_rx_urb; i++)
usb_kill_urb(self->rx_urb[i]);
/* Cancel Tx and speed URB.
* Make sure it's synchronous to avoid races. */
self->usbintf = NULL;
/* Clean up our urbs */
- for (i = 0; i < IU_MAX_RX_URBS; i++)
+ for (i = 0; i < self->max_rx_urb; i++)
usb_free_urb(self->rx_urb[i]);
+ kfree(self->rx_urb);
/* Clean up Tx and speed URB */
usb_free_urb(self->tx_urb);
usb_free_urb(self->speed_urb);
*/
module_param(qos_mtt_bits, int, 0);
MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
-MODULE_AUTHOR("Roman Weissgaerber <weissg@vienna.at>, Dag Brattli <dag@brattli.net> and Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("IrDA-USB Dongle Driver");
+MODULE_AUTHOR("Roman Weissgaerber <weissg@vienna.at>, Dag Brattli <dag@brattli.net>, Jean Tourrilhes <jt@hpl.hp.com> and Nick Fedchik <nick@fedchik.org.ua>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver");
MODULE_LICENSE("GPL");
/*****************************************************************************
*
* Filename: irda-usb.h
- * Version: 0.9b
+ * Version: 0.10
* Description: IrDA-USB Driver
* Status: Experimental
* Author: Dag Brattli <dag@brattli.net>
* Copyright (C) 2001, Roman Weissgaerber <weissg@vienna.at>
* Copyright (C) 2000, Dag Brattli <dag@brattli.net>
* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ * Copyright (C) 2004, SigmaTel, Inc. <irquality@sigmatel.com>
+ * Copyright (C) 2005, Milan Beno <beno@pobox.sk>
+ * Copyright (C) 2006, Nick FEdchik <nick@fedchik.org.ua>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <net/irda/irda.h>
#include <net/irda/irda_device.h> /* struct irlap_cb */
+#define PATCH_FILE_SIZE_MAX 65536
+#define PATCH_FILE_SIZE_MIN 80
+
#define RX_COPY_THRESHOLD 200
#define IRDA_USB_MAX_MTU 2051
#define IRDA_USB_SPEED_MTU 64 /* Weird, but work like this */
/* Inbound header */
#define MEDIA_BUSY 0x80
-#define SPEED_2400 0x01
-#define SPEED_9600 0x02
-#define SPEED_19200 0x03
-#define SPEED_38400 0x04
-#define SPEED_57600 0x05
-#define SPEED_115200 0x06
-#define SPEED_576000 0x07
-#define SPEED_1152000 0x08
-#define SPEED_4000000 0x09
+#define SPEED_2400 0x01
+#define SPEED_9600 0x02
+#define SPEED_19200 0x03
+#define SPEED_38400 0x04
+#define SPEED_57600 0x05
+#define SPEED_115200 0x06
+#define SPEED_576000 0x07
+#define SPEED_1152000 0x08
+#define SPEED_4000000 0x09
+#define SPEED_16000000 0x0a
/* Basic capabilities */
#define IUC_DEFAULT 0x00 /* Basic device compliant with 1.0 spec */
#define IUC_SMALL_PKT 0x10 /* Device doesn't behave with big Rx packets */
#define IUC_MAX_WINDOW 0x20 /* Device underestimate the Rx window */
#define IUC_MAX_XBOFS 0x40 /* Device need more xbofs than advertised */
+#define IUC_STIR_4210 0x80 /* SigmaTel 4210/4220/4116 VFIR */
/* USB class definitions */
-#define USB_IRDA_HEADER 0x01
-#define USB_CLASS_IRDA 0x02 /* USB_CLASS_APP_SPEC subclass */
-#define USB_DT_IRDA 0x21
+#define USB_IRDA_HEADER 0x01
+#define USB_CLASS_IRDA 0x02 /* USB_CLASS_APP_SPEC subclass */
+#define USB_DT_IRDA 0x21
+#define USB_IRDA_SIGMATEL_HEADER 0x03
+#define IU_SIGMATEL_MAX_RX_URBS (IU_MAX_ACTIVE_RX_URBS + USB_IRDA_SIGMATEL_HEADER)
struct irda_class_desc {
__u8 bLength;
* (6.2.5, USB-IrDA class spec 1.0) */
#define IU_REQ_GET_CLASS_DESC 0x06
+#define STIR421X_MAX_PATCH_DOWNLOAD_SIZE 1023
struct irda_usb_cb {
struct irda_class_desc *irda_desc;
__u16 bulk_out_mtu; /* Max Tx packet size in bytes */
__u8 bulk_int_ep; /* Interrupt Endpoint assignments */
- struct urb *rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
+ __u8 max_rx_urb;
+ struct urb **rx_urb; /* URBs used to receive data frames */
struct urb *idle_rx_urb; /* Pointer to idle URB in Rx path */
struct urb *tx_urb; /* URB used to send data frames */
struct urb *speed_urb; /* URB used to send speed commands */
__u32 speed; /* Current speed */
__s32 new_speed; /* speed we need to set */
+ __u8 header_length; /* USB-IrDA frame header size */
+ int needspatch; /* device needs firmware patch */
+
struct timer_list rx_defer_timer; /* Wait for Rx error to clear */
};
projects / linux-2.6 / commitdiff